openwrt/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "ar9132_buffalo_wzr-hp-g300nh.dtsi"

/ {
	compatible = "buffalo,wzr-hp-g300nh-rb", "qca,ar9132";
	model = "Buffalo WZR-HP-G300NH (rtl8366rb)";
};

&switch {
	status = "okay";

	compatible = "realtek,rtl8366rb";
};

&eth0 {
	status = "okay";

	pll-data = <0x1f000000 0x13000a44 0x00441099>;
};

&eth1 {
	status = "okay";

	pll-data = <0x100 0x13000a44 0x00441099>;
};
ath79: Add support for Buffalo WZR-HP-G300NH This device is a wireless router working on 2.4GHz band based on Qualcom/Atheros AR9132 rev 2 SoC and is accompanied by Atheros AR9103 wireless chip and Realtek RTL8366RB/S switches. Due to two different switches being used also two different devices are provided. Specification: - 400 MHz CPU - 64 MB of RAM - 32 MB of FLASH (NOR) - 3x3:2 2.4 GHz 802.11bgn - 5x 10/100/1000 Mbps Ethernet - 4x LED, 3x button, On/Off slider, Auto/On/Off slider - 1x USB 2.0 - bare UART header place on PCB Flash instruction: - NOTE: Pay attention to the switch variant and choose the image to flash accordingly. (dmesg / kernel logs can tell it) - Methods for flashing - Apply factory image in OEM firmware web-gui. - Sysupgrade on top of existing OpenWRT image - U-Boot TFPT recovery for both stock or OpenWRT images: The device U-boot contains a TFTP server that by default has an address 192.168.11.1 (MAC 02:AA:BB:CC:DD:1A). During the boot there is a time window, during which the device allows an image to be uploaded from a client with address 192.168.11.2. The image will be written on flash automatically. 1) Have a computer with static IP address 192.168.11.2 and the router device switched off. 2) Connect the LAN port next to the WAN port in the device and the computer using a network switch. 3) Assign IP 192.168.11.1 the MAC address 02:AA:BB:CC:DD:1A arp -s 192.168.11.1 02:AA:BB:CC:DD:1A 4) Initiate an upload using TFTP image variant curl -T <imagename> tftp://192.168.11.1 5) Switch on the device. The image will be uploaded subsequently. You can keep an eye on the diag light on the device, it should keep on blinking for a while indicating the writing of the image. General notes: - In the stock firmware the MAC address is the same among all interfaces so it is left here that way too. Recovery: - TFTP method - U-boot serial console Differences to ar71xx platform - This device is split in two different targets now due to hardware being a bit different under the hood. Dynamic solution within the same image is left for later time. - GPIOs for a sliding On/Off switch, marked 'Movie engine' on the device cover, were the wrong way around and were renamed qos_on -> movie_off, qos_off -> movie_on. Associated key codes remained the same they were. The device tree source code is mostly based on musashino's work Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> (cherry picked from commit bc356de2850f14629cb1301be719772fa1212e72) 2020-09-07 19:04:26 +00:00			`// SPDX-License-Identifier: GPL-2.0-or-later OR MIT`

			`#include "ar9132_buffalo_wzr-hp-g300nh.dtsi"`

			`/ {`
			`compatible = "buffalo,wzr-hp-g300nh-rb", "qca,ar9132";`
			`model = "Buffalo WZR-HP-G300NH (rtl8366rb)";`
			`};`

			`&switch {`
			`status = "okay";`

			`compatible = "realtek,rtl8366rb";`
			`};`

			`&eth0 {`
			`status = "okay";`

			`pll-data = <0x1f000000 0x13000a44 0x00441099>;`
			`};`

			`&eth1 {`
			`status = "okay";`

			`pll-data = <0x100 0x13000a44 0x00441099>;`
			`};`