openwrt/target/linux/bmips/dts/bcm6328-arcadyan-ar7516.dts

187 lines
2.6 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6328.dtsi"
/ {
model = "Arcadyan AR7516";
compatible = "arcadyan,ar7516", "brcm,bcm6328";
aliases {
led-failsafe = &led_upgrade_green;
led-upgrade = &led_upgrade_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
bcm43227-sprom {
compatible = "brcm,bcma-sprom";
pci-bus = <1>;
pci-dev = <0>;
nvmem-cells = <&macaddr_cfe_6a0>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
brcm,sprom = "brcm/bcm43227-sprom.bin";
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cfe_6a0>;
nvmem-cell-names = "mac-address";
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe: partition@0 {
label = "cfe";
reg = <0x000000 0x010000>;
read-only;
};
partition@10000 {
compatible = "brcm,bcm963xx-imagetag";
label = "firmware";
reg = <0x010000 0x7e0000>;
};
partition@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
&pinctrl_leds>;
led_upgrade_green: led@1 {
reg = <1>;
label = "green:upgrade";
};
led@6 {
reg = <6>;
active-low;
label = "green:wan";
};
led@7 {
reg = <7>;
active-low;
label = "green:wifi";
};
};
&ohci {
status = "okay";
};
&pcie {
status = "okay";
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio1", "gpio6", "gpio7";
};
};
&switch0 {
ports {
port@0 {
reg = <0>;
label = "lan1";
phy-handle = <&phy1>;
phy-mode = "mii";
};
port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&phy2>;
phy-mode = "mii";
};
port@2 {
reg = <2>;
label = "lan3";
phy-handle = <&phy3>;
phy-mode = "mii";
};
port@3 {
reg = <3>;
label = "wan";
phy-handle = <&phy4>;
phy-mode = "mii";
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};
&cfe {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cfe_6a0: macaddr@6a0 {
reg = <0x6a0 0x6>;
};
};