ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 14:13:16 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
1dc5d56ca0
openwrt/target/linux/realtek/image/Makefile

69 lines
1.6 KiB
Makefile
Raw Normal View History

rtl838x: add new architecture This adds support for the RTL838x Architecture. SoCs of this type are used in managed and un-managed Switches and Routers with 8-28 ports. Drivers are provided for SoC initialization, GPIOs, Flash, Ethernet including a DSA switch driver and internal and external PHYs used with these switches. Supported SoCs: RTL8380M RTL8381M RTL8382M The kernel will also boot on the following RTL839x SoCs, however driver support apart from spi-nor is missing: RTL8390 RTL8391 RTL8393 The following PHYs are supported: RTL8214FC (Quad QSGMII multiplexing GMAC and SFP port) RTL8218B internal: internal PHY of the RTL838x chips RTL8318b external (QSGMII 8-port GMAC phy) RTL8382M SerDes for 2 SFP ports Initialization sequences for the PHYs are provided in the form of firmware files. Flash driver supports 3 / 4 byte access DSA switch driver supports VLANs, port isolation, STP and port mirroring. The ALLNET ALL-SG8208M is supported as Proof of Concept: RTL8382M SoC 1 MIPS 4KEc core @ 500MHz 8 Internal PHYs (RTL8218B) 128MB DRAM (Nanya NT5TU128MB) 16MB NOR Flash (MXIC 25L128) 8 GBEthernet ports with one green status LED each (SoC controlled) 1 Power LED (not configurable) 1 SYS LED (configurable) 1 On-Off switch (not configurable) 1 Reset button at the right behind right air-vent (not configurable) 1 Reset button on front panel (configurable) 12V 1A barrel connector 1 serial header with populated standard pin connector and with markings GND TX RX Vcc(3.3V), connection properties: 115200 8N1 To install, upload the sysupgrade image to the OEM webpage. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2020-09-13 07:06:13 +00:00
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR = 0x80000000
KERNEL_ENTRY = 0x80000400
define Device/Default
PROFILES = Default
KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | uImage gzip
DEVICE_DTS_DIR := ../dts
DEVICE_DTS = $$(SOC)_$(1)
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | \
append-metadata | check-size
endef
define Device/allnet_all-sg8208m
SOC := rtl8382
IMAGE_SIZE := 7168k
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-SG8208M
UIMAGE_MAGIC := 0x00000006
rtl838x: drop custom mkimage build function UIMAGE_MAGIC is now supported by Build/uImage, in addition to UIMAGE_NAME. This removes the need for a custom mkimage call, so let's remove it. Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-04 09:21:17 +00:00
UIMAGE_NAME := 2.2.2.0
rtl838x: add new architecture This adds support for the RTL838x Architecture. SoCs of this type are used in managed and un-managed Switches and Routers with 8-28 ports. Drivers are provided for SoC initialization, GPIOs, Flash, Ethernet including a DSA switch driver and internal and external PHYs used with these switches. Supported SoCs: RTL8380M RTL8381M RTL8382M The kernel will also boot on the following RTL839x SoCs, however driver support apart from spi-nor is missing: RTL8390 RTL8391 RTL8393 The following PHYs are supported: RTL8214FC (Quad QSGMII multiplexing GMAC and SFP port) RTL8218B internal: internal PHY of the RTL838x chips RTL8318b external (QSGMII 8-port GMAC phy) RTL8382M SerDes for 2 SFP ports Initialization sequences for the PHYs are provided in the form of firmware files. Flash driver supports 3 / 4 byte access DSA switch driver supports VLANs, port isolation, STP and port mirroring. The ALLNET ALL-SG8208M is supported as Proof of Concept: RTL8382M SoC 1 MIPS 4KEc core @ 500MHz 8 Internal PHYs (RTL8218B) 128MB DRAM (Nanya NT5TU128MB) 16MB NOR Flash (MXIC 25L128) 8 GBEthernet ports with one green status LED each (SoC controlled) 1 Power LED (not configurable) 1 SYS LED (configurable) 1 On-Off switch (not configurable) 1 Reset button at the right behind right air-vent (not configurable) 1 Reset button on front panel (configurable) 12V 1A barrel connector 1 serial header with populated standard pin connector and with markings GND TX RX Vcc(3.3V), connection properties: 115200 8N1 To install, upload the sysupgrade image to the OEM webpage. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2020-09-13 07:06:13 +00:00
endef
TARGET_DEVICES += allnet_all-sg8208m
rtl838x: d-link_dgs-1210: refactor common family bits So the common bits can be easily shared with other boards in the family and while at it add missing SPDX license identifiers into the DTS files and fixed alphabetic sorting of the devices in the images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-04 09:39:42 +00:00
define Device/d-link_dgs-1210
rtl838x: add DLink DGS-1210-16 support Signed-off-by: John Crispin <john@phrozen.org>
2020-10-15 11:36:10 +00:00
SOC := rtl8382
IMAGE_SIZE := 13824k
DEVICE_VENDOR := D-Link
endef
rtl838x: various fixes * add d-link_dgs-1210-10p support * make sure mips16 is disabled * add a generic sub target * add proper cflags Signed-off-by: John Crispin <john@phrozen.org>
2020-10-19 12:47:45 +00:00
define Device/d-link_dgs-1210-10p
rtl838x: d-link_dgs-1210: refactor common family bits So the common bits can be easily shared with other boards in the family and while at it add missing SPDX license identifiers into the DTS files and fixed alphabetic sorting of the devices in the images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-04 09:39:42 +00:00
$(Device/d-link_dgs-1210)
rtl838x: various fixes * add d-link_dgs-1210-10p support * make sure mips16 is disabled * add a generic sub target * add proper cflags Signed-off-by: John Crispin <john@phrozen.org>
2020-10-19 12:47:45 +00:00
DEVICE_MODEL := DGS-1210-10P
rtl838x: d-link_dgs-1210: refactor common family bits So the common bits can be easily shared with other boards in the family and while at it add missing SPDX license identifiers into the DTS files and fixed alphabetic sorting of the devices in the images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-04 09:39:42 +00:00
DEVICE_PACKAGES += lua-rs232
rtl838x: various fixes * add d-link_dgs-1210-10p support * make sure mips16 is disabled * add a generic sub target * add proper cflags Signed-off-by: John Crispin <john@phrozen.org>
2020-10-19 12:47:45 +00:00
endef
TARGET_DEVICES += d-link_dgs-1210-10p
rtl838x: d-link_dgs-1210: refactor common family bits So the common bits can be easily shared with other boards in the family and while at it add missing SPDX license identifiers into the DTS files and fixed alphabetic sorting of the devices in the images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-04 09:39:42 +00:00
define Device/d-link_dgs-1210-16
$(Device/d-link_dgs-1210)
DEVICE_MODEL := DGS-1210-16
endef
TARGET_DEVICES += d-link_dgs-1210-16
rtl838x: add support for D-Link DGS-1210-28 Hardware specification ---------------------- * RTL8382M SoC, 1 MIPS 4KEc core @ 500MHz * 128MB DRAM * 32MB NOR Flash (MX25L25635E) * 24 x 10/100/1000BASE-T ports - Internal PHY with 8 ports (RTL8218B) - Two external PHYs with 8 ports each (RTL8218B) * 4 x Gigabit RJ45/SFP Combo ports - External PHY with 4 SFP ports (RTL8214FC) * Power LED * Reset button on front panel * UART (115200 8N1) via unpopulated standard 0.1" pin header marked J6 UART pinout ----------- [oooo]J3 [o]ooo|J6 | ^ ||`------ GND | | |`------- RX | | `-------- TX | `---------- Vcc (3V3) | `------------------ J3 is power input connector nearby J6 UART Boot initramfs image from U-Boot -------------------------------- 1. Press Escape key during `Hit Esc key to stop autoboot` prompt 2. Press CTRL+C keys to get into real U-Boot prompt 3. Init network with `rtk network on` command 4. Load image with `tftpboot 0x8f000000 openwrt-rtl838x-generic-d-link_dgs-1210-28-initramfs-kernel.bin` command 5. Boot the image with `bootm` command To install, upload the sysupgrade image to the OEM webpage or sysupgrade from the system running from initramfs image. It has been developed and tested on device with F1 revision. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-04 10:37:42 +00:00
define Device/d-link_dgs-1210-28
$(Device/d-link_dgs-1210)
DEVICE_MODEL := DGS-1210-28
endef
TARGET_DEVICES += d-link_dgs-1210-28
realtek: update the tree to the latest refactored version * rename the target to realtek * add refactored DSA driver * add latest gpio driver * lots of arch cleanups * new irq driver * additional boards Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: John Crispin <john@phrozen.org>
2020-11-26 11:02:21 +00:00
define Device/netgear_gs110tpp-v1
$(Device/Default)
SOC := rtl8380
IMAGE_SIZE := 14848k
UIMAGE_MAGIC := 0x4e474520
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := GS110TP
DEVICE_VARIANT := v1
endef
TARGET_DEVICES += netgear_gs110tpp-v1
rtl838x: add new architecture This adds support for the RTL838x Architecture. SoCs of this type are used in managed and un-managed Switches and Routers with 8-28 ports. Drivers are provided for SoC initialization, GPIOs, Flash, Ethernet including a DSA switch driver and internal and external PHYs used with these switches. Supported SoCs: RTL8380M RTL8381M RTL8382M The kernel will also boot on the following RTL839x SoCs, however driver support apart from spi-nor is missing: RTL8390 RTL8391 RTL8393 The following PHYs are supported: RTL8214FC (Quad QSGMII multiplexing GMAC and SFP port) RTL8218B internal: internal PHY of the RTL838x chips RTL8318b external (QSGMII 8-port GMAC phy) RTL8382M SerDes for 2 SFP ports Initialization sequences for the PHYs are provided in the form of firmware files. Flash driver supports 3 / 4 byte access DSA switch driver supports VLANs, port isolation, STP and port mirroring. The ALLNET ALL-SG8208M is supported as Proof of Concept: RTL8382M SoC 1 MIPS 4KEc core @ 500MHz 8 Internal PHYs (RTL8218B) 128MB DRAM (Nanya NT5TU128MB) 16MB NOR Flash (MXIC 25L128) 8 GBEthernet ports with one green status LED each (SoC controlled) 1 Power LED (not configurable) 1 SYS LED (configurable) 1 On-Off switch (not configurable) 1 Reset button at the right behind right air-vent (not configurable) 1 Reset button on front panel (configurable) 12V 1A barrel connector 1 serial header with populated standard pin connector and with markings GND TX RX Vcc(3.3V), connection properties: 115200 8N1 To install, upload the sysupgrade image to the OEM webpage. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2020-09-13 07:06:13 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink