openwrt/target/linux/brcm2708/patches-4.19/950-0618-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch

73 lines
2.3 KiB
Diff
Raw Normal View History

From 00f31bede51da02552b235fc93d35f357f13378a Mon Sep 17 00:00:00 2001
From: Stefan Wahren <wahrenst@gmx.net>
Date: Thu, 2 May 2019 23:42:29 +0200
Subject: [PATCH 618/703] HACK: clk-bcm2835: Add BCM2838_CLOCK_EMMC2 support
The new BCM2838 supports an additional emmc2 clock. So add a new
compatible to register this clock only for BCM2838.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
drivers/clk/bcm/clk-bcm2835.c | 20 ++++++++++++++++++--
include/dt-bindings/clock/bcm2835.h | 2 ++
2 files changed, 20 insertions(+), 2 deletions(-)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -124,6 +124,8 @@
#define CM_AVEODIV 0x1bc
#define CM_EMMCCTL 0x1c0
#define CM_EMMCDIV 0x1c4
+#define CM_EMMC2CTL 0x1d0
+#define CM_EMMC2DIV 0x1d4
/* General bits for the CM_*CTL regs */
# define CM_ENABLE BIT(4)
@@ -2047,6 +2049,15 @@ static const struct bcm2835_clk_desc clk
.frac_bits = 8,
.tcnt_mux = 39),
+ /* EMMC2 clock (only available for BCM2838) */
+ [BCM2838_CLOCK_EMMC2] = REGISTER_PER_CLK(
+ .name = "emmc2",
+ .ctl_reg = CM_EMMC2CTL,
+ .div_reg = CM_EMMC2DIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+ .tcnt_mux = 42),
+
/* General purpose (GPIO) clocks */
[BCM2835_CLOCK_GP0] = REGISTER_PER_CLK(
.name = "gp0",
@@ -2276,8 +2287,12 @@ static int bcm2835_clk_probe(struct plat
for (i = 0; i < asize; i++) {
desc = &clk_desc_array[i];
- if (desc->clk_register && desc->data)
- hws[i] = desc->clk_register(cprman, desc->data);
+ if (desc->clk_register && desc->data) {
+ if ((i != BCM2838_CLOCK_EMMC2) ||
+ of_device_is_compatible(fw_node, "brcm,bcm2838-cprman")) {
+ hws[i] = desc->clk_register(cprman, desc->data);
+ }
+ }
}
ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk);
@@ -2297,6 +2312,7 @@ static int bcm2835_clk_probe(struct plat
static const struct of_device_id bcm2835_clk_of_match[] = {
{ .compatible = "brcm,bcm2835-cprman", },
+ { .compatible = "brcm,bcm2838-cprman", },
{}
};
MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
--- a/include/dt-bindings/clock/bcm2835.h
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -66,3 +66,5 @@
#define BCM2835_CLOCK_DSI1E 48
#define BCM2835_CLOCK_DSI0P 49
#define BCM2835_CLOCK_DSI1P 50
+
+#define BCM2838_CLOCK_EMMC2 51