openwrt/target/linux/bcm27xx/patches-5.4/950-0863-irqchip-bcm2835-Quiesce-IRQs-left-enabled-by-bootloa.patch

From 4ae861da5eaf53e5b4303f080bff0e34e22da0d9 Mon Sep 17 00:00:00 2001
From: Lukas Wunner <lukas@wunner.de>
Date: Tue, 4 Feb 2020 15:50:41 +0100
Subject: [PATCH] irqchip/bcm2835: Quiesce IRQs left enabled by
 bootloader

[ Upstream commit bd59b343a9c902c522f006e6d71080f4893bbf42 ]

Per the spec, the BCM2835's IRQs are all disabled when coming out of
power-on reset.  Its IRQ driver assumes that's still the case when the
kernel boots and does not perform any initialization of the registers.
However the Raspberry Pi Foundation's bootloader leaves the USB
interrupt enabled when handing over control to the kernel.

Quiesce IRQs and the FIQ if they were left enabled and log a message to
let users know that they should update the bootloader once a fixed
version is released.

If the USB interrupt is not quiesced and the USB driver later on claims
the FIQ (as it does on the Raspberry Pi Foundation's downstream kernel),
interrupt latency for all other peripherals increases and occasional
lockups occur.  That's because both the FIQ and the normal USB interrupt
fire simultaneously:

On a multicore Raspberry Pi, if normal interrupts are routed to CPU 0
and the FIQ to CPU 1 (hardcoded in the Foundation's kernel), then a USB
interrupt causes CPU 0 to spin in bcm2836_chained_handle_irq() until the
FIQ on CPU 1 has cleared it.  Other peripherals' interrupts are starved
as long.  I've seen CPU 0 blocked for up to 2.9 msec.  eMMC throughput
on a Compute Module 3 irregularly dips to 23.0 MB/s without this commit
but remains relatively constant at 23.5 MB/s with this commit.

The lockups occur when CPU 0 receives a USB interrupt while holding a
lock which CPU 1 is trying to acquire while the FIQ is temporarily
disabled on CPU 1.  At best users get RCU CPU stall warnings, but most
of the time the system just freezes.

Fixes: 89214f009c1d ("ARM: bcm2835: add interrupt controller driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/f97868ba4e9b86ddad71f44ec9d8b3b7d8daa1ea.1582618537.git.lukas@wunner.de
---
 drivers/irqchip/irq-bcm2835.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -67,8 +67,7 @@
 #define ARM_LOCAL_GPU_INT_ROUTING 0x0c
 
 #define REG_FIQ_CONTROL		0x0c
-#define REG_FIQ_ENABLE		0x80
-#define REG_FIQ_DISABLE		0
+#define FIQ_CONTROL_ENABLE	BIT(7)
 
 #define NR_BANKS		3
 #define IRQS_PER_BANK		32
@@ -116,7 +115,7 @@ static inline unsigned int hwirq_to_fiq(
 static void armctrl_mask_irq(struct irq_data *d)
 {
 	if (d->hwirq >= NUMBER_IRQS)
-		writel_relaxed(REG_FIQ_DISABLE, intc.base + REG_FIQ_CONTROL);
+		writel_relaxed(0, intc.base + REG_FIQ_CONTROL);
 	else
 		writel_relaxed(HWIRQ_BIT(d->hwirq),
 			       intc.disable[HWIRQ_BANK(d->hwirq)]);
@@ -143,7 +142,7 @@ static void armctrl_unmask_irq(struct ir
 				       ARM_LOCAL_GPU_INT_ROUTING);
 		}
 
-		writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
+		writel_relaxed(FIQ_CONTROL_ENABLE | hwirq_to_fiq(d->hwirq),
 			       intc.base + REG_FIQ_CONTROL);
 	} else {
 		writel_relaxed(HWIRQ_BIT(d->hwirq),
@@ -201,6 +200,7 @@ static int __init armctrl_of_init(struct
 {
 	void __iomem *base;
 	int irq = 0, last_irq, b, i;
+	u32 reg;
 
 	base = of_iomap(node, 0);
 	if (!base)
@@ -224,6 +224,19 @@ static int __init armctrl_of_init(struct
 				handle_level_irq);
 			irq_set_probe(irq);
 		}
+
+		reg = readl_relaxed(intc.enable[b]);
+		if (reg) {
+			writel_relaxed(reg, intc.disable[b]);
+			pr_err(FW_BUG "Bootloader left irq enabled: "
+			       "bank %d irq %*pbl\n", b, IRQS_PER_BANK, &reg);
+		}
+	}
+
+	reg = readl_relaxed(base + REG_FIQ_CONTROL);
+	if (reg & FIQ_CONTROL_ENABLE) {
+		writel_relaxed(0, base + REG_FIQ_CONTROL);
+		pr_err(FW_BUG "Bootloader left fiq enabled\n");
 	}
 
 	last_irq = irq;