ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 17:48:58 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
1b6e9b3f64
openwrt/target/linux/sunxi/image/cortexa53.mk

93 lines
2.2 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# SPDX-License-Identifier: GPL-2.0-only
sunxi: Add A64 support with cortex53 subtarget This adds initial support for the A64 Allwinner SoC to LEDE. It will be build in the new cortexa53 subtarget. Currently it only supports the pine64 and the image is able to boot on this SoC. Camera, Ethernet, HDMI and other parts are currently not working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:53:20 +00:00
#
# Copyright (C) 2013-2016 OpenWrt.org
# Copyright (C) 2016 Yousong Zhou
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
define Device/sun50i
SUNXI_DTS_DIR := allwinner/
KERNEL_NAME := Image
KERNEL := kernel-bin
endef
define Device/sun50i-h5
SOC := sun50i-h5
$(Device/sun50i)
endef
define Device/sun50i-a64
SOC := sun50i-a64
$(Device/sun50i)
endef
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
define Device/friendlyarm_nanopi-neo-plus2
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 02:26:00 +00:00
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO Plus2
sunxi: add support for NanoPi NEO Plus2 board arm64: allwinner: h5: NanoPi NEO Plus2 DT support Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports & 2x USB via headers Signed-off-by: Antony Antony <antony@phenome.org>
2017-12-28 17:21:15 +00:00
SUPPORTED_DEVICES:=nanopi-neo-plus2
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
$(Device/sun50i-h5)
sunxi: add support for NanoPi NEO Plus2 board arm64: allwinner: h5: NanoPi NEO Plus2 DT support Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports & 2x USB via headers Signed-off-by: Antony Antony <antony@phenome.org>
2017-12-28 17:21:15 +00:00
endef
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
TARGET_DEVICES += friendlyarm_nanopi-neo-plus2
sunxi: add support for NanoPi NEO Plus2 board arm64: allwinner: h5: NanoPi NEO Plus2 DT support Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports & 2x USB via headers Signed-off-by: Antony Antony <antony@phenome.org>
2017-12-28 17:21:15 +00:00
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
define Device/friendlyarm_nanopi-neo2
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 02:26:00 +00:00
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO2
sunxi: build image/uboot for the NanoPi NEO2 The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
2018-09-19 20:31:26 +00:00
SUPPORTED_DEVICES:=nanopi-neo2
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
$(Device/sun50i-h5)
sunxi: build image/uboot for the NanoPi NEO2 The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
2018-09-19 20:31:26 +00:00
endef
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
TARGET_DEVICES += friendlyarm_nanopi-neo2
sunxi: build image/uboot for the NanoPi NEO2 The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
2018-09-19 20:31:26 +00:00
sunxi: add support for Libre Computer ALL-H3-CC H5 Specification: - CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz - DDR3 RAM: 2GB - Network: 10/100M Ethernet x 1 - IR: x1 (Receive) - USB (Host) Type-A x3 - USB (OTG) Type-A x1 - MicroSD Slot x 1 - eMMC Slot x1 - MicroUSB power input - GPIO 40pin header - UART 3pin header - Leds: - librecomputer:blue:status - librecomputer:green:pwr - Buttons: - uboot button (used to enter fel mode) - power button (can trigger power on) - Power Supply via MicroUSB or GPIO 5V/2A Installation: - Write the image to SD Card with dd - Boot from the SD Card Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [Fixed Signed-off-by] Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-10-18 18:05:23 +00:00
define Device/libretech_all-h3-cc-h5
DEVICE_VENDOR := Libre Computer
DEVICE_MODEL := ALL-H3-CC
DEVICE_VARIANT := H5
$(Device/sun50i-h5)
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-libretech-all-h3-cc
endef
TARGET_DEVICES += libretech_all-h3-cc-h5
sunxi: a53: add support for Olimex A64-Olinuxino Specifications: SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit) RAM: 1GB or 2GB RAM DDR3L @ 672Mhz Flash: 0/4/16GB eMMC flash memory for storage and boot MicroSD card connector for cards up to 32GB Debug: serial UART debug header with 0.1" pins Wired connectivity: 10/100/1000Mbps GbE Ethernet Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and Bluetooth 4.0 module with built-in antenna (only available in the A64-OLinuXino-1G4GW) Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert in into SD card slot on the device and boot. Known issues: Wireless doesn't work properly via netifd. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:57:50 +00:00
define Device/olimex_a64-olinuxino
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A64-Olinuxino
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
$(Device/sun50i-a64)
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino
endef
TARGET_DEVICES += olimex_a64-olinuxino
sunxi: a53: add support for Olimex A64-Olinuxino eMMC Specifications: SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit) RAM: 1GB or 2GB RAM DDR3L @ 672Mhz Flash: 0/4/16GB eMMC flash memory for storage and boot MicroSD card connector for cards up to 32GB Debug: serial UART debug header with 0.1" pins Wired connectivity: 10/100/1000Mbps GbE Ethernet Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and Bluetooth 4.0 module with built-in antenna (only available in the A64-OLinuXino-1G4GW) Flashing instructions: Standard sunxi SD card installation procedure - copy eMMC image to SD card, insert in into SD card slot on the device and boot. You should see something like following if the eMMC is detected correctly: mmcblk2: mmc2:0001 P1XXXX 3.60 GiB mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB Then flash SD card eMMC image straight into the mmcblk2 device: dd if=/mnt/openwrt...a64-olinuxino-emmc-squashfs-sdcard.img of=/dev/mmcblk2 It also possible to boot from boot0 partition[1]: 1. Compile U-Boot with CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x40 otherwise the U-Boot will get stuck in bootloop 2. Configure eMMC to boot from boot0 partition inside U-Boot: mmc bootbus 1 1 0 0; mmc partconf 1 1 1 0 3. echo 0 > /sys/block/mmcblk2boot0/force_ro 4. Write U-Boot from offset 0 (not offset 8k as with SD card) into boot0 partition dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk2boot0 Known issues: Wireless doesn't work properly via netifd. 1. https://linux-sunxi.org/index.php?title=Bootable_eMMC Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:57:50 +00:00
define Device/olimex_a64-olinuxino-emmc
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A64-Olinuxino
DEVICE_VARIANT := eMMC
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
$(Device/sun50i-a64)
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino-emmc
endef
TARGET_DEVICES += olimex_a64-olinuxino-emmc
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
define Device/pine64_pine64-plus
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 02:26:00 +00:00
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Pine64+
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
$(Device/sun50i-a64)
sunxi: Add A64 support with cortex53 subtarget This adds initial support for the A64 Allwinner SoC to LEDE. It will be build in the new cortexa53 subtarget. Currently it only supports the pine64 and the image is able to boot on this SoC. Camera, Ethernet, HDMI and other parts are currently not working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:53:20 +00:00
endef
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
TARGET_DEVICES += pine64_pine64-plus
sunxi: Add A64 support with cortex53 subtarget This adds initial support for the A64 Allwinner SoC to LEDE. It will be build in the new cortexa53 subtarget. Currently it only supports the pine64 and the image is able to boot on this SoC. Camera, Ethernet, HDMI and other parts are currently not working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:53:20 +00:00
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
define Device/pine64_sopine-baseboard
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 02:26:00 +00:00
DEVICE_VENDOR := Pine64
DEVICE_MODEL := SoPine
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
$(Device/sun50i-a64)
sunxi: add build for sopine This will generate image for Pine64 Sopine board. Signed-off-by: Fan Fan <fkpwolf@gmail.com>
2018-03-19 09:52:46 +00:00
endef
sunxi: use vendor_device scheme for device definitions This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-05 23:11:56 +00:00
TARGET_DEVICES += pine64_sopine-baseboard
sunxi: add build for sopine This will generate image for Pine64 Sopine board. Signed-off-by: Fan Fan <fkpwolf@gmail.com>
2018-03-19 09:52:46 +00:00
sunxi: tidy up and sort alphabetically in image Makefiles This tidies up the image Makefiles for the sunxi target by: - Move the if-condition for the subtarget to the parent Makefile - Remove lots of unnecessary empty lines - Sort device definitions alphabetically - Harmonize line wrapping for DEVICE_PACKAGES Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 13:21:19 +00:00
define Device/xunlong_orangepi-pc2
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 02:26:00 +00:00
DEVICE_VENDOR := Xunlong
sunxi: tidy up and sort alphabetically in image Makefiles This tidies up the image Makefiles for the sunxi target by: - Move the if-condition for the subtarget to the parent Makefile - Remove lots of unnecessary empty lines - Sort device definitions alphabetically - Harmonize line wrapping for DEVICE_PACKAGES Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 13:21:19 +00:00
DEVICE_MODEL := Orange Pi PC 2
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
$(Device/sun50i-h5)
sunxi: Add Xunlong Orange Pi Zero Plus This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-27 22:46:50 +00:00
endef
sunxi: tidy up and sort alphabetically in image Makefiles This tidies up the image Makefiles for the sunxi target by: - Move the if-condition for the subtarget to the parent Makefile - Remove lots of unnecessary empty lines - Sort device definitions alphabetically - Harmonize line wrapping for DEVICE_PACKAGES Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 13:21:19 +00:00
TARGET_DEVICES += xunlong_orangepi-pc2
sunxi: Add Xunlong Orange Pi Zero Plus This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-27 22:46:50 +00:00
sunxi: tidy up and sort alphabetically in image Makefiles This tidies up the image Makefiles for the sunxi target by: - Move the if-condition for the subtarget to the parent Makefile - Remove lots of unnecessary empty lines - Sort device definitions alphabetically - Harmonize line wrapping for DEVICE_PACKAGES Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 13:21:19 +00:00
define Device/xunlong_orangepi-zero-plus
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 02:26:00 +00:00
DEVICE_VENDOR := Xunlong
sunxi: tidy up and sort alphabetically in image Makefiles This tidies up the image Makefiles for the sunxi target by: - Move the if-condition for the subtarget to the parent Makefile - Remove lots of unnecessary empty lines - Sort device definitions alphabetically - Harmonize line wrapping for DEVICE_PACKAGES Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 13:21:19 +00:00
DEVICE_MODEL := Orange Pi Zero Plus
sunxi: a53: image: make it DRY Replace same copy&pasted lines with the appropriate reusable bits. Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-16 09:56:01 +00:00
$(Device/sun50i-h5)
sunxi: Added support for Xunlong Orange Pi PC2 CPU: H5 High Performance Quad-core 64-bit Cortex-A53 GPU: Mali450 OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL Memory: 1GB DDR3 (shared with GPU) Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB) Onboard Network: 1000M/100M Ethernet RJ45 USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG, HOST mode role by default in DTS Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Antonio Silverio <menion@gmail.com>
2018-07-30 09:33:03 +00:00
endef
sunxi: tidy up and sort alphabetically in image Makefiles This tidies up the image Makefiles for the sunxi target by: - Move the if-condition for the subtarget to the parent Makefile - Remove lots of unnecessary empty lines - Sort device definitions alphabetically - Harmonize line wrapping for DEVICE_PACKAGES Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 13:21:19 +00:00
TARGET_DEVICES += xunlong_orangepi-zero-plus
Reference in New Issue Copy Permalink