openwrt/target/linux/brcm2708/patches-4.4/0506-BCM270X-Add-an-overlay-for-enabling-the-vc4-driver-i.patch

From 5395497a794d793f9657e3317634ad8e5003277f Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Wed, 14 Sep 2016 08:52:26 +0100
Subject: [PATCH] BCM270X: Add an overlay for enabling the vc4 driver in
 firmware-KMS mode.

This gets us normal 3D support on top of the existing firmware display
stack.  There's no real modesetting support, no async pageflips
(hurting performance), etc., but it means that the desktop can at
least run until we get full native modesetting.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/bcm2708_common.dtsi              | 31 +++++---
 arch/arm/boot/dts/overlays/Makefile                |  1 +
 arch/arm/boot/dts/overlays/README                  | 11 +++
 .../arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 89 ++++++++++++++++++++++
 4 files changed, 121 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts

--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -284,6 +284,26 @@
 			status = "disabled";
 		};
 
+		firmwarekms: firmwarekms@7e600000 {
+			compatible = "raspberrypi,rpi-firmware-kms";
+			/* SMI interrupt reg */
+			reg = <0x7e600000 0x100>;
+			interrupts = <2 16>;
+			brcm,firmware = <&firmware>;
+			status = "disabled";
+		};
+
+		smi: smi@7e600000 {
+			compatible = "brcm,bcm2835-smi";
+			reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>;
+			interrupts = <2 16>;
+			brcm,smi-clock-source = <6>;
+			brcm,smi-clock-divisor = <4>;
+			dmas = <&dma 4>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
 		dsi1: dsi@7e700000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -325,17 +345,6 @@
 			status = "disabled";
 		};
 
-		smi: smi@7e600000 {
-			compatible = "brcm,bcm2835-smi";
-			reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>;
-			interrupts = <2 16>;
-			brcm,smi-clock-source = <6>;
-			brcm,smi-clock-divisor = <4>;
-			dmas = <&dma 4>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
 		pixelvalve2: pixelvalve@7e807000 {
 			compatible = "brcm,bcm2835-pixelvalve2";
 			reg = <0x7e807000 0x100>;
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -96,6 +96,7 @@ dtbo-$(RPI_DT_OVERLAYS) += spi2-2cs.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += spi2-3cs.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += tinylcd35.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += uart1.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += vc4-fkms-v3d.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += vc4-kms-v3d.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += vga666.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += w1-gpio.dtbo
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1215,6 +1215,17 @@ Params: txd1_pin                GPIO pin
         rxd1_pin                GPIO pin for RXD1 (15, 33 or 41 - default 15)
 
 
+Name:   vc4-fkms-v3d
+Info:   Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx
+        display stack.
+Load:   dtoverlay=vc4-fkms-v3d,<param>
+Params: cma-256                 CMA is 256MB, 256MB-aligned (needs 1GB)
+        cma-192                 CMA is 192MB, 256MB-aligned (needs 1GB)
+        cma-128                 CMA is 128MB, 128MB-aligned
+        cma-96                  CMA is 96MB, 128MB-aligned
+        cma-64                  CMA is 64MB, 64MB-aligned
+
+
 Name:   vc4-kms-v3d
 Info:   Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or
         booting to GUI while this overlay is in use will cause interesting
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts
@@ -0,0 +1,89 @@
+/*
+ * vc4-fkms-v3d-overlay.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target-path = "/chosen";
+		__overlay__ {
+			bootargs = "cma=256M@256M";
+		};
+	};
+
+	fragment@1 {
+		target-path = "/chosen";
+		__dormant__ {
+			bootargs = "cma=192M@256M";
+		};
+	};
+
+	fragment@2 {
+		target-path = "/chosen";
+		__dormant__ {
+			bootargs = "cma=128M@128M";
+		};
+	};
+
+	fragment@3 {
+		target-path = "/chosen";
+		__dormant__ {
+			bootargs = "cma=96M@128M";
+		};
+	};
+
+	fragment@4 {
+		target-path = "/chosen";
+		__dormant__ {
+			bootargs = "cma=64M@64M";
+		};
+	};
+
+	fragment@5 {
+		target = <&fb>;
+		__overlay__  {
+			status = "disabled";
+		};
+	};
+
+	fragment@6 {
+		target = <&firmwarekms>;
+		__overlay__  {
+			status = "okay";
+		};
+	};
+
+	fragment@7 {
+		target = <&v3d>;
+		__overlay__  {
+			interrupts = <1 10>;
+			status = "okay";
+		};
+	};
+
+	fragment@8 {
+		target = <&gpu>;
+		__overlay__  {
+			status = "okay";
+		};
+	};
+
+	fragment@9 {
+		target-path = "/soc/dma";
+		__overlay__ {
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+	};
+
+	__overrides__ {
+		cma-256 = <0>,"+0-1-2-3-4";
+		cma-192 = <0>,"-0+1-2-3-4";
+		cma-128 = <0>,"-0-1+2-3-4";
+		cma-96  = <0>,"-0-1-2+3-4";
+		cma-64  = <0>,"-0-1-2-3+4";
+	};
+};