openwrt/package/boot/uboot-mvebu/patches/0003-arm-mvebu-eDPU-support-new-board-revision.patch

From 83c00ee665b8dde813458b2b07cf97ce8409248d Mon Sep 17 00:00:00 2001
From: Robert Marko <robert.marko@sartura.hr>
Date: Fri, 4 Aug 2023 22:39:06 +0200
Subject: [PATCH 3/3] arm: mvebu: eDPU: support new board revision

There is a new eDPU revision that uses Marvell 88E6361 switch onboard.
We can rely on detecting the switch to enable and fixup the Linux DTS
so a single DTS can be used.

There is currently no support for the 88E6361 switch and thus no working
networking in U-Boot, so we disable both ports.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 arch/arm/dts/armada-3720-eDPU-u-boot.dtsi |  13 ++-
 arch/arm/dts/armada-3720-eDPU.dts         |  47 ++++++++
 board/Marvell/mvebu_armada-37xx/board.c   | 125 ++++++++++++++++++++++
 configs/eDPU_defconfig                    |   2 +
 4 files changed, 182 insertions(+), 5 deletions(-)

--- a/arch/arm/dts/armada-3720-eDPU-u-boot.dtsi
+++ b/arch/arm/dts/armada-3720-eDPU-u-boot.dtsi
@@ -32,14 +32,17 @@
 	bootph-all;
 };
 
-&eth0 {
-	/* G.hn does not work without additional configuration */
-	status = "disabled";
-};
-
 &eth1 {
 	fixed-link {
 		speed = <1000>;
 		full-duplex;
 	};
 };
+
+/*
+ * eDPU v2 has a MV88E6361 switch on the MDIO bus and U-boot is used
+ * to patch the Linux DTS if its found so enable MDIO by default.
+ */
+&mdio {
+	status = "okay";
+};
--- a/arch/arm/dts/armada-3720-eDPU.dts
+++ b/arch/arm/dts/armada-3720-eDPU.dts
@@ -12,3 +12,50 @@
 &eth0 {
 	phy-mode = "2500base-x";
 };
+
+/*
+ * External MV88E6361 switch is only available on v2 of the board.
+ * U-Boot will enable the MDIO bus and switch nodes.
+ */
+&mdio {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+
+	/* Actual device is MV88E6361 */
+	switch: switch@0 {
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth0>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "downlink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "uplink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				sfp = <&sfp_eth1>;
+			};
+		};
+	};
+};
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -13,6 +13,7 @@
 #include <mmc.h>
 #include <miiphy.h>
 #include <phy.h>
+#include <fdt_support.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
@@ -49,6 +50,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Single-chip mode */
 /* Switch Port Registers */
 #define MVEBU_SW_LINK_CTRL_REG		(1)
+#define MVEBU_SW_PORT_SWITCH_ID		(3)
 #define MVEBU_SW_PORT_CTRL_REG		(4)
 #define MVEBU_SW_PORT_BASE_VLAN		(6)
 
@@ -56,6 +58,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #define MVEBU_G2_SMI_PHY_CMD_REG	(24)
 #define MVEBU_G2_SMI_PHY_DATA_REG	(25)
 
+#define SWITCH_88E6361_PRODUCT_NUMBER	0x2610
+
 /*
  * Memory Controller Registers
  *
@@ -72,6 +76,27 @@ DECLARE_GLOBAL_DATA_PTR;
 #define A3700_MC_CTRL2_SDRAM_TYPE_DDR3	2
 #define A3700_MC_CTRL2_SDRAM_TYPE_DDR4	3
 
+static bool is_edpu_plus(void)
+{
+	struct udevice *bus;
+	ofnode node;
+	int val;
+
+	node = ofnode_by_compatible(ofnode_null(), "marvell,orion-mdio");
+	if (!ofnode_valid(node) ||
+	    uclass_get_device_by_ofnode(UCLASS_MDIO, node, &bus) ||
+	    device_probe(bus)) {
+		printf("Cannot find MDIO bus\n");
+		return -ENODEV;
+	}
+
+	val = dm_mdio_read(bus, 0x0, MDIO_DEVAD_NONE, MVEBU_SW_PORT_SWITCH_ID);
+	if (val == SWITCH_88E6361_PRODUCT_NUMBER)
+		return true;
+	else
+		return false;
+}
+
 int board_early_init_f(void)
 {
 	return 0;
@@ -353,6 +378,41 @@ static int espressobin_last_stage_init(v
 	return 0;
 }
 
+static int edpu_plus_last_stage_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (is_edpu_plus()) {
+		ret = uclass_get_device_by_name(UCLASS_ETH,
+						"ethernet@40000",
+						&dev);
+		if (!ret) {
+			device_remove(dev, DM_REMOVE_NORMAL);
+			device_unbind(dev);
+		}
+
+		/* Currently no networking support on the eDPU+ board */
+		ret = uclass_get_device_by_name(UCLASS_ETH,
+						"ethernet@30000",
+						&dev);
+		if (!ret) {
+			device_remove(dev, DM_REMOVE_NORMAL);
+			device_unbind(dev);
+		}
+	} else {
+		ret = uclass_get_device_by_name(UCLASS_ETH,
+						"ethernet@30000",
+						&dev);
+		if (!ret) {
+			device_remove(dev, DM_REMOVE_NORMAL);
+			device_unbind(dev);
+		}
+	}
+
+	return 0;
+}
+
 /* Bring-up board-specific network stuff */
 int last_stage_init(void)
 {
@@ -360,6 +420,9 @@ int last_stage_init(void)
 	if (of_machine_is_compatible("globalscale,espressobin"))
 		return espressobin_last_stage_init();
 
+	if (of_machine_is_compatible("methode,edpu"))
+		return edpu_plus_last_stage_init();
+
 	return 0;
 }
 #endif
@@ -460,12 +523,74 @@ static int espressobin_fdt_setup(void *b
 	return 0;
 }
 
+static int edpu_plus_fdt_setup(void *blob)
+{
+	const char *ports[] = { "downlink", "uplink" };
+	uint8_t mac[ETH_ALEN];
+	const char *path;
+	int i, ret;
+
+	if (is_edpu_plus()) {
+		ret = fdt_set_status_by_compatible(blob,
+						   "marvell,orion-mdio",
+						   FDT_STATUS_OKAY);
+		if (ret)
+			printf("Failed to enable MDIO!\n");
+
+		ret = fdt_set_status_by_alias(blob,
+					      "ethernet1",
+					      FDT_STATUS_DISABLED);
+		if (ret)
+			printf("Failed to disable ethernet1!\n");
+
+		path = fdt_get_alias(blob, "ethernet0");
+		if (path)
+			do_fixup_by_path_string(blob, path, "phy-mode", "2500base-x");
+		else
+			printf("Failed to update ethernet0 phy-mode to 2500base-x!\n");
+
+		ret = fdt_set_status_by_compatible(blob,
+						   "marvell,mv88e6190",
+						   FDT_STATUS_OKAY);
+		if (ret)
+			printf("Failed to enable MV88E6361!\n");
+
+		/*
+		 * MAC-s for Uplink and Downlink ports are stored under
+		 * non standard variable names, so lets manually fixup the
+		 * switch port nodes to have the desired MAC-s.
+		 */
+		for (i = 0; i < 2; i++) {
+			if (eth_env_get_enetaddr(ports[i], mac)) {
+				do_fixup_by_prop(blob,
+						 "label",
+						 ports[i],
+						 strlen(ports[i]) + 1,
+						 "mac-address",
+						 mac, ARP_HLEN, 1);
+
+				do_fixup_by_prop(blob,
+						 "label",
+						 ports[i],
+						 strlen(ports[i]) + 1,
+						 "local-mac-address",
+						 mac, ARP_HLEN, 1);
+			}
+		}
+	}
+
+	return 0;
+}
+
 int ft_board_setup(void *blob, struct bd_info *bd)
 {
 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 	if (of_machine_is_compatible("globalscale,espressobin"))
 		return espressobin_fdt_setup(blob);
 #endif
+	if (of_machine_is_compatible("methode,edpu"))
+		return edpu_plus_fdt_setup(blob);
+
 	return 0;
 }
 #endif
--- a/configs/eDPU_defconfig
+++ b/configs/eDPU_defconfig
@@ -17,12 +17,14 @@ CONFIG_DEBUG_UART=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_LAST_STAGE_INIT=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_PBSIZE=1048
 # CONFIG_CMD_ELF is not set