openwrt/target/linux/bcm63xx/patches-5.4/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch

From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 9 Mar 2014 04:08:06 +0100
Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
 setup

Pass a mac address allocator to board setup code to allow board
implementations to work with third party bootloaders not using nvram
for configuration storage.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
 arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
 arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
 arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
 3 files changed, 14 insertions(+), 8 deletions(-)

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -738,7 +738,8 @@ void __init board_prom_init(void)
 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
 			continue;
 		/* copy, board desc array is marked initdata */
-		board_early_setup(bcm963xx_boards[i]);
+		board_early_setup(bcm963xx_boards[i],
+				  bcm63xx_nvram_get_mac_address);
 		break;
 	}
 
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
@@ -18,7 +18,6 @@
 #include <bcm63xx_dev_uart.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
-#include <bcm63xx_nvram.h>
 #include <bcm63xx_gpio.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
@@ -81,15 +80,20 @@ const char *board_get_name(void)
 	return board.name;
 }
 
+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+
 /*
  * setup board for device registration
  */
-void __init board_early_setup(const struct board_info *target)
+void __init board_early_setup(const struct board_info *target,
+			      int (*get_mac_address)(u8 mac[ETH_ALEN]))
 {
 	u32 val;
 
 	memcpy(&board, target, sizeof(board));
 
+	board_get_mac_address = get_mac_address;
+
 	/* setup pin multiplexing depending on board enabled device,
 	 * this has to be done this early since PCI init is done
 	 * inside arch_initcall */
@@ -162,15 +166,15 @@ int __init board_register_devices(void)
 		bcm63xx_pcmcia_register();
 
 	if (board.has_enet0 &&
-	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
+	    !board_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
 
 	if (board.has_enet1 &&
-	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
+	    !board_get_mac_address(board.enet1.mac_addr))
 		bcm63xx_enet_register(1, &board.enet1);
 
 	if (board.has_enetsw &&
-	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+	    !board_get_mac_address(board.enetsw.mac_addr))
 		bcm63xx_enetsw_register(&board.enetsw);
 
 	if (board.has_usbd)
@@ -186,7 +190,7 @@ int __init board_register_devices(void)
 	 * do this after registering enet devices
 	 */
 #ifdef CONFIG_SSB_PCIHOST
-	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		if (ssb_arch_register_fallback_sprom(
--- a/arch/mips/bcm63xx/boards/board_common.h
+++ b/arch/mips/bcm63xx/boards/board_common.h
@@ -3,6 +3,7 @@
 
 #include <board_bcm963xx.h>
 
-void board_early_setup(const struct board_info *board);
+void board_early_setup(const struct board_info *board,
+		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
 
 #endif /* __BOARD_COMMON_H */