openwrt/target/linux/generic/pending-4.19/430-mtd-add-myloader-partition-parser.patch

230 lines
6.0 KiB
Diff
Raw Normal View History

From: Florian Fainelli <f.fainelli@gmail.com>
Subject: Add myloader partition table parser
[john@phozen.org: shoud be upstreamable]
lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[add myloader.c to patch]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
kernel: Make the patches apply on top of 4.19 This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 17:01:44 +00:00
@@ -177,6 +177,22 @@ menu "Partition parsers"
source "drivers/mtd/parsers/Kconfig"
endmenu
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on ADM5120 || ATH25 || ATH79
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
#
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
obj-y += parsers/
# 'Users' - code which presents functionality to userspace.
--- /dev/null
+++ b/drivers/mtd/myloader.c
@@ -0,0 +1,181 @@
+/*
+ * Parse MyLoader-style flash partition tables and produce a Linux partition
+ * array to match.
+ *
+ * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was based on drivers/mtd/redboot.c
+ * Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/byteorder/generic.h>
+#include <linux/myloader.h>
+
+#define BLOCK_LEN_MIN 0x10000
+#define PART_NAME_LEN 32
+
+struct part_data {
+ struct mylo_partition_table tab;
+ char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
+};
+
+static int myloader_parse_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct part_data *buf;
+ struct mylo_partition_table *tab;
+ struct mylo_partition *part;
+ struct mtd_partition *mtd_parts;
+ struct mtd_partition *mtd_part;
+ int num_parts;
+ int ret, i;
+ size_t retlen;
+ char *names;
+ unsigned long offset;
+ unsigned long blocklen;
+
+ buf = vmalloc(sizeof(*buf));
+ if (!buf) {
+ return -ENOMEM;
+ goto out;
+ }
+ tab = &buf->tab;
+
+ blocklen = master->erasesize;
+ if (blocklen < BLOCK_LEN_MIN)
+ blocklen = BLOCK_LEN_MIN;
+
+ offset = blocklen;
+
+ /* Find the partition table */
+ for (i = 0; i < 4; i++, offset += blocklen) {
+ printk(KERN_DEBUG "%s: searching for MyLoader partition table"
+ " at offset 0x%lx\n", master->name, offset);
+
+ ret = mtd_read(master, offset, sizeof(*buf), &retlen,
+ (void *)buf);
+ if (ret)
+ goto out_free_buf;
+
+ if (retlen != sizeof(*buf)) {
+ ret = -EIO;
+ goto out_free_buf;
+ }
+
+ /* Check for Partition Table magic number */
+ if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS))
+ break;
+
+ }
+
+ if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
+ printk(KERN_DEBUG "%s: no MyLoader partition table found\n",
+ master->name);
+ ret = 0;
+ goto out_free_buf;
+ }
+
+ /* The MyLoader and the Partition Table is always present */
+ num_parts = 2;
+
+ /* Detect number of used partitions */
+ for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
+ part = &tab->partitions[i];
+
+ if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
+ continue;
+
+ num_parts++;
+ }
+
+ mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
+ num_parts * PART_NAME_LEN), GFP_KERNEL);
+
+ if (!mtd_parts) {
+ ret = -ENOMEM;
+ goto out_free_buf;
+ }
+
+ mtd_part = mtd_parts;
+ names = (char *)&mtd_parts[num_parts];
+
+ strncpy(names, "myloader", PART_NAME_LEN);
+ mtd_part->name = names;
+ mtd_part->offset = 0;
+ mtd_part->size = offset;
+ mtd_part->mask_flags = MTD_WRITEABLE;
+ mtd_part++;
+ names += PART_NAME_LEN;
+
+ strncpy(names, "partition_table", PART_NAME_LEN);
+ mtd_part->name = names;
+ mtd_part->offset = offset;
+ mtd_part->size = blocklen;
+ mtd_part->mask_flags = MTD_WRITEABLE;
+ mtd_part++;
+ names += PART_NAME_LEN;
+
+ for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
+ part = &tab->partitions[i];
+
+ if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
+ continue;
+
+ if ((buf->names[i][0]) && (buf->names[i][0] != '\xff'))
+ strncpy(names, buf->names[i], PART_NAME_LEN);
+ else
+ snprintf(names, PART_NAME_LEN, "partition%d", i);
+
+ mtd_part->offset = le32_to_cpu(part->addr);
+ mtd_part->size = le32_to_cpu(part->size);
+ mtd_part->name = names;
+ mtd_part++;
+ names += PART_NAME_LEN;
+ }
+
+ *pparts = mtd_parts;
+ ret = num_parts;
+
+ out_free_buf:
+ vfree(buf);
+ out:
+ return ret;
+}
+
+static struct mtd_part_parser myloader_mtd_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = myloader_parse_partitions,
+ .name = "MyLoader",
+};
+
+static int __init myloader_mtd_parser_init(void)
+{
+ register_mtd_parser(&myloader_mtd_parser);
+
+ return 0;
+}
+
+static void __exit myloader_mtd_parser_exit(void)
+{
+ deregister_mtd_parser(&myloader_mtd_parser);
+}
+
+module_init(myloader_mtd_parser_init);
+module_exit(myloader_mtd_parser_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
+MODULE_LICENSE("GPL v2");