2021-02-10 13:52:34 +00:00
|
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
2017-01-04 17:51:35 +00:00
|
|
|
#
|
|
|
|
|
# Copyright (C) 2017 Cezary Jackiewicz <cezary@eko.one.pll>
|
|
|
|
|
|
2021-04-13 04:46:17 +00:00
|
|
|
define KernelPackage/amd-xgbe
|
|
|
|
|
SUBMENU:=$(NETWORK_DEVICES_MENU)
|
|
|
|
|
TITLE:=AMD Ethernet on SoC support
|
2023-05-04 20:47:27 +00:00
|
|
|
DEPENDS:=@PCI_SUPPORT @TARGET_x86_64 +kmod-lib-crc32c +kmod-ptp +kmod-libphy +kmod-mdio-devres
|
2021-04-13 04:46:17 +00:00
|
|
|
KCONFIG:=CONFIG_AMD_XGBE
|
|
|
|
|
FILES:=$(LINUX_DIR)/drivers/net/ethernet/amd/xgbe/amd-xgbe.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,35,amd-xgbe)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/amd-xgbe/description
|
|
|
|
|
Kernel modules for AMD 10GbE Ethernet device on an AMD SoC.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,amd-xgbe))
|
|
|
|
|
|
|
|
|
|
|
2023-11-26 22:59:54 +00:00
|
|
|
define KernelPackage/dwmac-intel
|
|
|
|
|
SUBMENU:=$(NETWORK_DEVICES_MENU)
|
|
|
|
|
TITLE:=Intel GMAC support
|
|
|
|
|
DEPENDS:=@TARGET_x86_64 +kmod-stmmac-core
|
|
|
|
|
KCONFIG:=CONFIG_DWMAC_INTEL
|
|
|
|
|
FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.ko
|
|
|
|
|
AUTOLOAD=$(call AutoLoad,45,dwmac-intel)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,dwmac-intel))
|
|
|
|
|
|
|
|
|
|
|
2022-05-01 12:10:43 +00:00
|
|
|
define KernelPackage/f71808e-wdt
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=Fintek F718xx/F818xx Watchdog Timer
|
|
|
|
|
DEPENDS:=@TARGET_x86
|
2022-08-03 14:22:12 +00:00
|
|
|
KCONFIG:=\
|
|
|
|
|
CONFIG_F71808E_WDT \
|
|
|
|
|
CONFIG_WATCHDOG_CORE=y
|
2022-05-01 12:10:43 +00:00
|
|
|
FILES:=$(LINUX_DIR)/drivers/watchdog/f71808e_wdt.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoProbe,f71808e-wdt,1)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/f71808e-wdt/description
|
|
|
|
|
Kernel module for the watchdog timer found on many Fintek Super-IO chips.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,f71808e-wdt))
|
|
|
|
|
|
|
|
|
|
|
2017-01-04 17:51:35 +00:00
|
|
|
define KernelPackage/sound-cs5535audio
|
|
|
|
|
TITLE:=CS5535/CS5536 Audio Controller
|
|
|
|
|
DEPENDS:=@TARGET_x86_geode +kmod-ac97
|
|
|
|
|
KCONFIG:=CONFIG_SND_CS5535AUDIO
|
|
|
|
|
FILES:=$(LINUX_DIR)/sound/pci/cs5535audio/snd-cs5535audio.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,36,snd-cs5535audio)
|
|
|
|
|
$(call AddDepends/sound)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/sound-cs5535audio/description
|
|
|
|
|
Support for the integrated AC97 sound device on motherboards
|
|
|
|
|
with AMD CS5535/CS5536 chipsets.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,sound-cs5535audio))
|
2017-01-14 16:20:25 +00:00
|
|
|
|
2020-02-23 04:05:35 +00:00
|
|
|
define KernelPackage/sp5100-tco
|
2017-01-14 16:20:25 +00:00
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=SP5100 Watchdog Support
|
|
|
|
|
DEPENDS:=@TARGET_x86
|
|
|
|
|
KCONFIG:=CONFIG_SP5100_TCO
|
|
|
|
|
FILES:=$(LINUX_DIR)/drivers/watchdog/sp5100_tco.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,50,sp5100_tco,1)
|
|
|
|
|
endef
|
|
|
|
|
|
2020-02-23 04:05:35 +00:00
|
|
|
define KernelPackage/sp5100-tco/description
|
2017-01-14 16:20:25 +00:00
|
|
|
Kernel module for the SP5100_TCO hardware watchdog.
|
|
|
|
|
endef
|
|
|
|
|
|
2020-02-23 04:05:35 +00:00
|
|
|
$(eval $(call KernelPackage,sp5100-tco))
|
2019-07-02 10:04:58 +00:00
|
|
|
|
|
|
|
|
|
2022-05-01 12:10:25 +00:00
|
|
|
define KernelPackage/ib700-wdt
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=IB700 SBC Watchdog Timer
|
|
|
|
|
DEPENDS:=@TARGET_x86
|
|
|
|
|
KCONFIG:=CONFIG_IB700_WDT
|
|
|
|
|
FILES:=$(LINUX_DIR)/drivers/watchdog/ib700wdt.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,50,ib700wdt,1)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/ib700-wdt/description
|
|
|
|
|
Kernel module for the hardware watchdog on the IB700 Single
|
|
|
|
|
Board Computer produced by TMC Technology (www.tmc-uk.com).
|
|
|
|
|
Also used by QEMU/libvirt.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,ib700-wdt))
|
|
|
|
|
|
2022-05-01 12:10:43 +00:00
|
|
|
define KernelPackage/it87-wdt
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=ITE IT87 Watchdog Timer
|
|
|
|
|
DEPENDS:=@TARGET_x86
|
|
|
|
|
KCONFIG:=CONFIG_IT87_WDT
|
|
|
|
|
FILES:=$(LINUX_DIR)/drivers/watchdog/it87_wdt.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
|
|
|
|
|
MODPARAMS.it87-wdt:= \
|
|
|
|
|
nogameport=1 \
|
|
|
|
|
nocir=1
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/it87-wdt/description
|
|
|
|
|
Kernel module for ITE IT87 Watchdog Timer
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,it87-wdt))
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
define KernelPackage/itco-wdt
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=Intel iTCO Watchdog Timer
|
|
|
|
|
DEPENDS:=@TARGET_x86
|
2022-08-03 14:22:12 +00:00
|
|
|
KCONFIG:=\
|
|
|
|
|
CONFIG_ITCO_WDT \
|
|
|
|
|
CONFIG_ITCO_VENDOR_SUPPORT=y \
|
|
|
|
|
CONFIG_WATCHDOG_CORE=y
|
2022-05-01 12:10:43 +00:00
|
|
|
FILES:=$(LINUX_DIR)/drivers/watchdog/iTCO_wdt.ko \
|
|
|
|
|
$(LINUX_DIR)/drivers/watchdog/iTCO_vendor_support.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/itco-wdt/description
|
|
|
|
|
Kernel module for Intel iTCO Watchdog Timer
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,itco-wdt))
|
|
|
|
|
|
2022-05-01 12:10:25 +00:00
|
|
|
|
2019-07-02 10:04:58 +00:00
|
|
|
define KernelPackage/pcengines-apuv2
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=PC Engines APUv2/3 front button and LEDs driver
|
|
|
|
|
DEPENDS:=@TARGET_x86 +kmod-gpio-amd-fch +kmod-leds-gpio
|
|
|
|
|
KCONFIG:=CONFIG_PCENGINES_APU2
|
|
|
|
|
FILES:=$(LINUX_DIR)/drivers/platform/x86/pcengines-apuv2.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,60,pcengines-apuv2)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/pcengines-apuv2/description
|
|
|
|
|
This driver provides support for the front button and LEDs on
|
|
|
|
|
PC Engines APUv2/APUv3 board.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,pcengines-apuv2))
|
x86: add support for Meraki MX100
This commit will add support for the Meraki MX100 in OpenWRT.
Specs:
* CPU: Intel Xeon E3-1200 Series 1.5GHz 2C/4T
* Memory: 4GB DDR3 1600 ECC
* Storage: 1GB USB NAND, 1TB SATA HDD
* Wireless: None
* Wired: 10x 1Gb RJ45, 2x 1Gb SFP
UART:
The UART header is named CONN11 and is found in the
center of the mainboard. The pinout from Pin 1 (marked
with a black triangle) to pin 4 is below:
Pin 1: VCC
Pin 2: TX
Pin 3: RX
Pin 4: GND
Note that VCC is not required for UART on this device.
Booting:
1. Flash/burn one of the images from this repo to a
flash drive.
2. Take the top off the MX100, and unplug the SATA
cable from the HDD.
3. Hook up UART to the MX100, plug in the USB drive,
and then power up the device.
4. At the BIOS prompt, quickly press F7 and then
scroll to the Save & Exit tab.
5. Scroll down to Boot Override, and select the
UEFI entry for your jumpdrive.
Note: UEFI booting will fail if the SATA cable for
the HDD is plugged in.
The issue is explained under the Flashing instructions.
Flashing:
1. Ensure the MX100 is powered down, and not plugged
into power.
2. Take the top off the MX100, and unplug the SATA
cable from the HDD.
3. Using the Mini USB female port found by the SATA
port on the motherboard,
flash one of the images to the system. Example:
`dd if=image of=/dev/sdb conv=fdatasync` where sdb
is the USB device for the MX100's NAND.
4. Unplug the Mini USB, hook up UART to the MX100,
and then power up the device.
5. At the BIOS prompt, quickly press F7 and then
scroll to the Boot tab.
6. Change the boot order and set UEFI: USB DISK 2.0
as first, and USB DISK 2.0 as second.
Disable the other boot options.
7. Go to Save & Exit, and then select Save Changes and
Reset
Note that OpenWRT will fail to boot in UEFI mode when
the SATA hard drive is plugged in. To fix this, boot
with the SATA disk unplugged and then run the following
command:
`sed -i "s|hd0,gpt1|hd1,gpt1|g" boot/grub/grub.cfg`
Once the above is ran, OpenWRT will boot when the HDD
is plugged into SATA. The reason this happens is the
UEFI implementation for the MX100 will always set
anything on SATA to HD0 instead of the onboard USB
storage, so we have to accomidate it since OpenWRT's
GRUB does not support detecting a boot disk via UUID.
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-10-01 14:38:56 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
define KernelPackage/meraki-mx100
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=Cisco Meraki MX100 Platform Driver
|
2022-03-27 13:04:29 +00:00
|
|
|
DEPENDS:=@TARGET_x86 +kmod-tg3 +kmod-gpio-button-hotplug +kmod-leds-gpio \
|
2022-05-01 12:10:35 +00:00
|
|
|
+kmod-usb-ledtrig-usbport +PACKAGE_kmod-meraki-mx100:nu801 +kmod-itco-wdt \
|
|
|
|
|
+kmod-leds-uleds
|
x86: add support for Meraki MX100
This commit will add support for the Meraki MX100 in OpenWRT.
Specs:
* CPU: Intel Xeon E3-1200 Series 1.5GHz 2C/4T
* Memory: 4GB DDR3 1600 ECC
* Storage: 1GB USB NAND, 1TB SATA HDD
* Wireless: None
* Wired: 10x 1Gb RJ45, 2x 1Gb SFP
UART:
The UART header is named CONN11 and is found in the
center of the mainboard. The pinout from Pin 1 (marked
with a black triangle) to pin 4 is below:
Pin 1: VCC
Pin 2: TX
Pin 3: RX
Pin 4: GND
Note that VCC is not required for UART on this device.
Booting:
1. Flash/burn one of the images from this repo to a
flash drive.
2. Take the top off the MX100, and unplug the SATA
cable from the HDD.
3. Hook up UART to the MX100, plug in the USB drive,
and then power up the device.
4. At the BIOS prompt, quickly press F7 and then
scroll to the Save & Exit tab.
5. Scroll down to Boot Override, and select the
UEFI entry for your jumpdrive.
Note: UEFI booting will fail if the SATA cable for
the HDD is plugged in.
The issue is explained under the Flashing instructions.
Flashing:
1. Ensure the MX100 is powered down, and not plugged
into power.
2. Take the top off the MX100, and unplug the SATA
cable from the HDD.
3. Using the Mini USB female port found by the SATA
port on the motherboard,
flash one of the images to the system. Example:
`dd if=image of=/dev/sdb conv=fdatasync` where sdb
is the USB device for the MX100's NAND.
4. Unplug the Mini USB, hook up UART to the MX100,
and then power up the device.
5. At the BIOS prompt, quickly press F7 and then
scroll to the Boot tab.
6. Change the boot order and set UEFI: USB DISK 2.0
as first, and USB DISK 2.0 as second.
Disable the other boot options.
7. Go to Save & Exit, and then select Save Changes and
Reset
Note that OpenWRT will fail to boot in UEFI mode when
the SATA hard drive is plugged in. To fix this, boot
with the SATA disk unplugged and then run the following
command:
`sed -i "s|hd0,gpt1|hd1,gpt1|g" boot/grub/grub.cfg`
Once the above is ran, OpenWRT will boot when the HDD
is plugged into SATA. The reason this happens is the
UEFI implementation for the MX100 will always set
anything on SATA to HD0 instead of the onboard USB
storage, so we have to accomidate it since OpenWRT's
GRUB does not support detecting a boot disk via UUID.
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-10-01 14:38:56 +00:00
|
|
|
KCONFIG:=CONFIG_MERAKI_MX100
|
|
|
|
|
FILES:=$(LINUX_DIR)/drivers/platform/x86/meraki-mx100.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,60,meraki-mx100,1)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/meraki-mx100/description
|
|
|
|
|
This driver provides support for the front button and LEDs on
|
|
|
|
|
the Cisco Meraki MX100 (Tinkerbell) 1U appliance. Note this also
|
|
|
|
|
selects the gpio-cdev nu801 userspace driver to support the Status
|
|
|
|
|
LED, as well as other required platform drivers.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,meraki-mx100))
|
2022-05-01 12:10:43 +00:00
|
|
|
|
|
|
|
|
define KernelPackage/w83627hf-wdt
|
|
|
|
|
SUBMENU:=$(OTHER_MENU)
|
|
|
|
|
TITLE:=Winbond 83627HF Watchdog Timer
|
|
|
|
|
DEPENDS:=@TARGET_x86
|
2022-08-03 14:22:12 +00:00
|
|
|
KCONFIG:=\
|
|
|
|
|
CONFIG_W83627HF_WDT \
|
2023-01-13 14:30:02 +00:00
|
|
|
CONFIG_WATCHDOG_CORE=y
|
2022-05-01 12:10:43 +00:00
|
|
|
FILES:=$(LINUX_DIR)/drivers/watchdog/w83627hf_wdt.ko
|
|
|
|
|
AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define KernelPackage/w83627hf-wdt/description
|
|
|
|
|
Kernel module for Winbond 83627HF Watchdog Timer
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call KernelPackage,w83627hf-wdt))
|
