ath79: add support for D-Link DAP-2230 A1
Specifications:
* QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
* 10/100 Ethernet Port, 802.11af PoE
Installation:
* Factory Web UI is at 192.168.0.50
login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
connect network cable, hold reset button during power-on and keep it
pressed until uploading has started (only required when checksum is ok,
e.g. for reverting back to oem firmware), flash factory.bin
After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2020-06-16 22:11:37 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
|
2021-01-03 23:56:57 +00:00
|
|
|
#include "qca953x_dlink_dap-2xxx.dtsi"
|
ath79: add support for D-Link DAP-2230 A1
Specifications:
* QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
* 10/100 Ethernet Port, 802.11af PoE
Installation:
* Factory Web UI is at 192.168.0.50
login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
connect network cable, hold reset button during power-on and keep it
pressed until uploading has started (only required when checksum is ok,
e.g. for reverting back to oem firmware), flash factory.bin
After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2020-06-16 22:11:37 +00:00
|
|
|
|
|
|
|
/ {
|
|
|
|
compatible = "dlink,dap-2230-a1", "qca,qca9533";
|
|
|
|
model = "D-Link DAP-2230 A1";
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
led-boot = &led_power_green;
|
|
|
|
led-failsafe = &led_power_green;
|
|
|
|
led-running = &led_power_green;
|
|
|
|
led-upgrade = &led_power_green;
|
|
|
|
};
|
|
|
|
|
|
|
|
keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
reset {
|
|
|
|
label = "reset";
|
|
|
|
linux,code = <KEY_RESTART>;
|
|
|
|
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
|
|
|
led_power_green: power_green {
|
|
|
|
label = "green:power";
|
|
|
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
|
|
|
default-state = "on";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&partitions {
|
|
|
|
partition@70000 {
|
|
|
|
label = "firmware";
|
|
|
|
reg = <0x70000 0xee0000>;
|
|
|
|
compatible = "wrg";
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@f50000 {
|
|
|
|
label = "dlink";
|
|
|
|
reg = <0xf50000 0xa0000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
};
|