openwrt/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts

236 lines
3.8 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "keenetic,kn-1613", "mediatek,mt7628an-soc";
model = "Keenetic KN-1613";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
internet {
label = "green:internet";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "green:wifi2";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi5 {
label = "green:wifi5";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
fn {
label = "fn";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
reset {
label = "reset";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&firmware1 &firmware2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x0 0x1ec0000>;
};
};
};
};
&state_default {
gpio {
groups = "i2s", "i2c", "gpio", "refclk", "wdt", "wled_an";
function = "gpio";
};
};
&usbphy {
status = "disabled";
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <32000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-config";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "rf-eeprom";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_400: eeprom@400 {
reg = <0x400 0x4da8>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
};
firmware1: partition@50000 {
label = "firmware_1";
reg = <0x50000 0xf60000>;
};
partition@fb0000 {
label = "config_1";
reg = <0xfb0000 0x40000>;
read-only;
};
partition@ff0000 {
label = "dump";
reg = <0xff0000 0x10000>;
read-only;
};
partition@1000000 {
label = "u-state";
reg = <0x1000000 0x30000>;
read-only;
};
partition@1030000 {
label = "u-config_res";
reg = <0x1030000 0x10000>;
read-only;
};
partition@1040000 {
label = "rf-eeprom_res";
reg = <0x1040000 0x10000>;
read-only;
};
firmware2: partition@1050000 {
label = "firmware_2";
reg = <0x1050000 0xf60000>;
};
partition@1fb0000 {
label = "config_2";
reg = <0x1fb0000 0x40000>;
read-only;
};
};
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x3e>;
};
&wmac {
status = "okay";
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_400>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};