ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 00:11:13 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
1235e2ee3b
openwrt/target/linux/ramips/image/rt3883.mk

148 lines
3.8 KiB
Makefile
Raw Normal View History

ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
#
# RT3662/RT3883 Profiles
#
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
define Build/mkrtn56uimg
$(STAGING_DIR_HOST)/bin/mkrtn56uimg $(1) $@
endef
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
define Device/asus_rt-n56u
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3662
ramips: use rootfs splitter and new image build code for BR-6475ND Use the edimax uImage splitter instead of the fixed size rootfs partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-02 19:00:22 +00:00
BLOCKSIZE := 64k
ramips: remove ralink_default_fw_size_xxx variables There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 16:09:57 +00:00
IMAGE_SIZE := 7872k
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
IMAGE/sysupgrade.bin += | mkrtn56uimg -s
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N56U
ramips: rt3883: remove swconfig from individual DEVICE_PACKAGES In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES. This is redundant as the package is already provided via DEFAULT_PACKAGES. Remove the redundant inclusions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 21:04:55 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
SUPPORTED_DEVICES += rt-n56u
ramips: use rootfs splitter and new image build code for BR-6475ND Use the edimax uImage splitter instead of the fixed size rootfs partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-02 19:00:22 +00:00
endef
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
TARGET_DEVICES += asus_rt-n56u
ramips: use rootfs splitter and new image build code for BR-6475ND Use the edimax uImage splitter instead of the fixed size rootfs partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-02 19:00:22 +00:00
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
define Device/belkin_f9k1109v1
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3883
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
BLOCKSIZE := 64k
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
DEVICE_VENDOR := Belkin
DEVICE_MODEL := F9K1109
DEVICE_VARIANT := Version 1.0
ramips: rt3883: remove swconfig from individual DEVICE_PACKAGES In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES. This is redundant as the package is already provided via DEFAULT_PACKAGES. Remove the redundant inclusions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 21:04:55 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
ramips/rt288x,rt3883: fix IMAGE_SIZE for all devices This fixes IMAGE_SIZE for all devices based on the partition size given in DTS: DEVICE *.MK *.DTS VERDICT airlink101_ar670w (4M) 0x3c0000 wrong airlink101_ar725w - 0x3B0000 wrong asus_rt-n15 (4M) 0x3b0000 belkin_f5d8235-v1 7744k 0x7b0000 wrong buffalo_wli-tx4-ag300n (4M) 0x3b0000 buffalo_wzr-agl300nh (4M) 0x3b0000 dlink_dap-1522-a1 3801088 0x3a0000 ralink_v11st-fe (4M) 0x003b0000 asus_rt-n56u - 0x007b0000 default belkin_f9k1109v1 7224k 0x7a0000 wrong dlink_dir-645 - 0x7b0000 default edimax_br-6475nd 7744k 0x00790000 loewe_wmdr-143n - 0x7b0000 default omnima_hpm 16064k 0x00fb0000 samsung_cy-swr1100 - 0x7b0000 default sitecom_wlr-6000 7244k 0x713000 trendnet_tew-691gr - 0x007b0000 default trendnet_tew-692gr - 0x007b0000 default No verdict means that the device is correctly set. Legend: ( ): Value is set via ralink_default_fw_size_xxM [ ]: Value is derived from parent definition - : Value is not set and derived from default definition Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-15 12:55:31 +00:00
IMAGE_SIZE := 7808k
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
KERNEL := kernel-bin | append-dtb | lzma -d16 | uImage lzma
# Stock firmware checks for this uImage image name during upload.
UIMAGE_NAME := N750F9K1103VB
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
endef
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
TARGET_DEVICES += belkin_f9k1109v1
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
define Device/dlink_dir-645
ramips: consolidate seama image build code Create a common template which has the required image build code defined. Add some new variables to pass individual parts to the seama recipes. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-29 18:25:00 +00:00
$(Device/seama)
ramips: rt3883: use lzma-loader for DIR-645 The DIR-645 fails to boot if the kernel is large. Enabling lzma-loader resolves the issue. Run-tested on D-Link DIR-645. Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
2020-08-26 11:46:23 +00:00
$(Device/uimage-lzma-loader)
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3662
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
BLOCKSIZE := 4k
ramips: remove ralink_default_fw_size_xxx variables There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 16:09:57 +00:00
IMAGE_SIZE := 7872k
ramips: reduce lzma dictionary size for D-Link DIR-645 Currently this device fails to boot with the OpenWrt snapshot images (release images are unaffected). The error message is: "LZMA ERROR 1 - must RESET board to recover". This happens because the kernel image is too big for the bootloader to boot. This commit works around this by decreasing the lzma dictionary size option from the default 23 to 10. Before this change the current OpenWrt snapshot image (uncompressed kernel size 4875139 bytes) failed to boot, while now an even bigger image (kernel 4.19 with snapshot default config; uncompressed kernel size 5162833 bytes) boots just fine. The highest lzma dictionary size option this image booted with was 11. 10 was chosen to have a bit more room for growth. An unavoidable side-effect of this change is that the compressed kernel image will take up more space. Total image size with different dictionary size options: D23 - 3973903 bytes (base) D16 - 4113167 bytes (+3.5% - +139264 bytes) D12 - 4317967 bytes (+8.7% - +344064‬ bytes) D11 - 4383503 bytes (+10.3% - +409600 bytes) D10 - 4461327 bytes (+12.3% - +487424 bytes) Fixes: FS#1484 Signed-off-by: Mason Clarke <mclarke2355@gmail.com>
2019-12-29 18:03:00 +00:00
KERNEL := kernel-bin | append-dtb | lzma -d10
ramips: consolidate seama image build code Create a common template which has the required image build code defined. Add some new variables to pass individual parts to the seama recipes. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-29 18:25:00 +00:00
SEAMA_SIGNATURE := wrgn39_dlob.hans_dir645
ramips: convert DEVICE_TITLE to new variables Also unify naming and add details where they were missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-06 12:51:09 +00:00
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-645
ramips: rt3883: remove swconfig from individual DEVICE_PACKAGES In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES. This is redundant as the package is already provided via DEFAULT_PACKAGES. Remove the redundant inclusions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 21:04:55 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
SUPPORTED_DEVICES += dir-645
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
endef
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
TARGET_DEVICES += dlink_dir-645
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
define Device/edimax_br-6475nd
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3662
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
BLOCKSIZE := 64k
IMAGE_SIZE := 7744k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN54 -f 0x70000 -S 0x01100000 | pad-rootfs | \
treewide: call check-size before append-metadata sysupgrade metadata is not flashed to the device, so check-size should be called _before_ adding metadata to the image. While at it, do some obvious wrapping improvements. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
2021-06-20 16:54:36 +00:00
check-size | append-metadata
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
DEVICE_VENDOR := Edimax
DEVICE_MODEL := BR-6475nD
SUPPORTED_DEVICES += br-6475nd
endef
TARGET_DEVICES += edimax_br-6475nd
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
ramips: add support for Senao Engenius ESR600H FCC ID: A8J-ESR750H Engenius ESR600H is an indoor wireless router with a gigabit switch, 2.4 GHz and 5 GHz wireless, internal and external antennas, and a USB port. **Specification:** - RT3662F MIPS SOC, 5 GHz WMAC (2x2) - RT5392L PCI on-board, 2.4 GHz (2x2) - AR8327 RGMII, 7-port GbE, 25 MHz clock - 40 MHz reference clock - 8 MB FLASH 25L6406EM2I-12G - 64 MB RAM - UART at J12 (unpopulated) - 2 internal antennas (5 GHz) - 2 external antennas (2.4 GHz) - 9 LEDs, 1 button (power, wps, wifi2g, wifi5g, 5 LAN/WAN) - USB 2 port (GPIO controlled power) **MAC addresses:** MAC Addresses are labeled as WAN and WLAN U-boot environment has the the vendor MAC address for ethernet MAC addresses in "factory" are part of wifi calibration data eth0.2 WAN *:13:e7 u-boot-env wanaddr eth0.1 ---- *:13:e8 u-boot-env wanaddr + 1 phy0 WLAN *:14:b8 factory 0x8004 phy1 ---- *:14:bc factory 0x4 **Installation:** Method 1: Firmware upgrade page OEM webpage at 192.168.0.1 username and password "admin" Navigate to Network Setting --> Tools --> Firmware Click Browse and select the factory.dlf image Click Continue to confirm and wait 6 minutes or more... Method 2: Serial console to load TFTP image: (see TFTP recovery) **Return to OEM:** Unlike most Engenius boards, this does not have a 'failsafe' image the only way to return to OEM is serial access to uboot Unlike most Engenius boards, public images are not available... so the only way to return to OEM is to have a copy of the MTD partition "firmware" BEFORE flashing openwrt. **TFTP recovery:** Unlike most Engenius boards, TFTP is reliable here however it requires serial console access (soldering pins to the UART pinouts) build your own image... with 'ramdisk' selected under 'Target Images' rename initramfs-kernel.bin to 'uImageESR-600H' make the file available on a TFTP server at 192.168.99.8 interrupt boot by holding or pressing '4' in serial console as soon as board is powered on `tftpboot 0x81000000` `bootm 0x81000000` perform a sysupgrade **Format of OEM firmware image:** This Engenius board uses the Senao proprietary header with a unique Product ID. The header for factory.bin is generated by the mksenaofw program included in openwrt. .dlf file extension is also required for OEM software to accept it **Note on using OKLI:** the kernel is now too large for the bootloader to handle so OKLI is used via the `kernel-loader` image command recently in master several other ramips boards have the same problem 'Kernel panic - not syncing: Failed to find ralink,rt3883-sysc node' see commit ad19751edc21ae713bd95df6b93be64bd1e0c612 Signed-off-by: Michael Pratt <mcpratt@pm.me>
2020-11-26 08:33:40 +00:00
define Device/engenius_esr600h
$(Device/uimage-lzma-loader)
SOC := rt3662
BLOCKSIZE := 4k
IMAGE_SIZE := 7872k
IMAGES += factory.dlf
IMAGE/factory.dlf := $$(sysupgrade_bin) | check-size | \
senao-header -r 0x101 -p 0x44 -t 2
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ESR600H
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 uboot-envtools
endef
TARGET_DEVICES += engenius_esr600h
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
define Device/loewe_wmdr-143n
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3662
ramips: add support for Belkin F9K1109v1 Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch]
2019-02-03 18:54:18 +00:00
BLOCKSIZE := 64k
ramips: remove ralink_default_fw_size_xxx variables There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 16:09:57 +00:00
IMAGE_SIZE := 7872k
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
DEVICE_VENDOR := Loewe
DEVICE_MODEL := WMDR-143N
SUPPORTED_DEVICES += wmdr-143n
ramips: add support for Belkin F9K1109v1 Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch]
2019-02-03 18:54:18 +00:00
endef
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
TARGET_DEVICES += loewe_wmdr-143n
ramips: add support for Belkin F9K1109v1 Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch]
2019-02-03 18:54:18 +00:00
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
define Device/omnima_hpm
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3662
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
BLOCKSIZE := 64k
IMAGE_SIZE := 16064k
ramips: convert DEVICE_TITLE to new variables Also unify naming and add details where they were missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-06 12:51:09 +00:00
DEVICE_VENDOR := Omnima
DEVICE_MODEL := HPM
treewide: remove kmod-usb-core from DEVICE_PACKAGES This removes _all_ occurrences of kmod-usb-core from DEVICE_PACKAGES and similar variables. This package is pulled as dependency by one of the following packages in any case: - kmod-usb-chipidea - kmod-usb-dwc2 - kmod-usb-ledtrig-usbport - kmod-usb-ohci - kmod-usb2 - kmod-usb2-pci - kmod-usb3 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [remove kmod-usb-core from EnGenius ESR600] Signed-off-by: David Bauer <mail@david-bauer.net>
2019-09-22 10:06:25 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
SUPPORTED_DEVICES += hpm
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
endef
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
TARGET_DEVICES += omnima_hpm
ramips: switch some rt3883 devices to new build code Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 08:18:31 +00:00
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
define Device/samsung_cy-swr1100
$(Device/seama)
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3662
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
BLOCKSIZE := 64k
ramips: remove ralink_default_fw_size_xxx variables There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 16:09:57 +00:00
IMAGE_SIZE := 7872k
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
KERNEL := $(KERNEL_DTB)
SEAMA_SIGNATURE := wrgnd10_samsung_ss815
DEVICE_VENDOR := Samsung
DEVICE_MODEL := CY-SWR1100
ramips: rt3883: remove swconfig from individual DEVICE_PACKAGES In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES. This is redundant as the package is already provided via DEFAULT_PACKAGES. Remove the redundant inclusions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 21:04:55 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
SUPPORTED_DEVICES += cy-swr1100
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
endef
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
TARGET_DEVICES += samsung_cy-swr1100
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
define Device/sitecom_wlr-6000
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3883
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
BLOCKSIZE := 4k
IMAGE_SIZE := 7244k
IMAGES += factory.dlf
treewide: omit IMAGE_SIZE argument from check-size Now that check-size uses IMAGE_SIZE by default, we can skip the argument from image recipes to reduce redundancy. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-03-10 13:58:27 +00:00
IMAGE/factory.dlf := $$(sysupgrade_bin) | check-size | \
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
senao-header -r 0x0202 -p 0x41 -t 2
DEVICE_VENDOR := Sitecom
DEVICE_MODEL := WLR-6000
ramips: rt3883: remove swconfig from individual DEVICE_PACKAGES In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES. This is redundant as the package is already provided via DEFAULT_PACKAGES. Remove the redundant inclusions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-27 21:04:55 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
ramips: Sort all subtarget Makefiles This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-07 14:27:51 +00:00
SUPPORTED_DEVICES += wlr-6000
endef
TARGET_DEVICES += sitecom_wlr-6000
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
define Device/trendnet_tew-691gr
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3883
ramips: set blocksize for remaining rt3883 devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 19:03:57 +00:00
BLOCKSIZE := 64k
ramips: remove ralink_default_fw_size_xxx variables There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 16:09:57 +00:00
IMAGE_SIZE := 7872k
ramips: fix build of TRENDnet TEW-69xGR images The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-19 23:18:51 +00:00
IMAGES += factory.bin
ramips: tidy up image subtarget Makefiles - use tab indent in image build recipes for consistency - harmonize line wrapping Signed-off-by: Sungbo Eo <mans0n@gorani.run> [use different line wrapping for one recipe] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-08 16:21:06 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | umedia-header 0x026910
ramips: convert DEVICE_TITLE to new variables Also unify naming and add details where they were missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-06 12:51:09 +00:00
DEVICE_VENDOR := TRENDnet
DEVICE_MODEL := TEW-691GR
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
SUPPORTED_DEVICES += tew-691gr
ramips: fix build of TRENDnet TEW-69xGR images The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-19 23:18:51 +00:00
endef
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
TARGET_DEVICES += trendnet_tew-691gr
ramips: fix build of TRENDnet TEW-69xGR images The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-19 23:18:51 +00:00
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
define Device/trendnet_tew-692gr
ramips: rename MTK_SOC to SOC This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-20 00:15:57 +00:00
SOC := rt3883
ramips: set blocksize for remaining rt3883 devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 19:03:57 +00:00
BLOCKSIZE := 64k
ramips: remove ralink_default_fw_size_xxx variables There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 16:09:57 +00:00
IMAGE_SIZE := 7872k
ramips: fix build of TRENDnet TEW-69xGR images The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-19 23:18:51 +00:00
IMAGES += factory.bin
ramips: tidy up image subtarget Makefiles - use tab indent in image build recipes for consistency - harmonize line wrapping Signed-off-by: Sungbo Eo <mans0n@gorani.run> [use different line wrapping for one recipe] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-08 16:21:06 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | umedia-header 0x026920
ramips: convert DEVICE_TITLE to new variables Also unify naming and add details where they were missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-06 12:51:09 +00:00
DEVICE_VENDOR := TRENDnet
DEVICE_MODEL := TEW-692GR
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
SUPPORTED_DEVICES += tew-692gr
ramips: fix build of TRENDnet TEW-69xGR images The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-19 23:18:51 +00:00
endef
ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:16 +00:00
TARGET_DEVICES += trendnet_tew-692gr
Reference in New Issue Copy Permalink