openwrt/package/kernel/mac80211/patches/brcm/001-brcmfmac-allow-setting-wlan-MAC-address-using-device.patch

104 lines
3.5 KiB
Diff
Raw Normal View History

From 716c220b4d990a4fe7800d0685ca69dee99e4e8f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pavel=20L=C3=B6bl?= <pavel@loebl.cz>
Date: Fri, 6 May 2022 06:42:46 +0200
Subject: [PATCH] brcmfmac: allow setting wlan MAC address using device tree
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This allows firmware to provide MAC address using device tree. Like in
case there is no MAC burned in wlan NVRAM.
Signed-off-by: Pavel Löbl <pavel@loebl.cz>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506044246.67146-1-pavel@loebl.cz
---
.../broadcom/brcm80211/brcmfmac/common.c | 23 ++++++++++++++-----
.../broadcom/brcm80211/brcmfmac/common.h | 1 +
.../broadcom/brcm80211/brcmfmac/core.c | 4 +++-
.../wireless/broadcom/brcm80211/brcmfmac/of.c | 3 +++
4 files changed, 24 insertions(+), 7 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -202,13 +202,24 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
char *ptr;
s32 err;
- /* retreive mac address */
- err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
- sizeof(ifp->mac_addr));
- if (err < 0) {
- bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
- goto done;
+ if (is_valid_ether_addr(ifp->mac_addr)) {
+ /* set mac address */
+ err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr,
+ ETH_ALEN);
+ if (err < 0) {
+ bphy_err(ifp->drvr, "Setting cur_etheraddr failed, %d\n", err);
+ goto done;
+ }
+ } else {
+ /* retrieve mac address */
+ err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
+ sizeof(ifp->mac_addr));
+ if (err < 0) {
+ bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
+ goto done;
+ }
}
+
memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac));
memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -50,6 +50,7 @@ struct brcmf_mp_device {
bool ignore_probe_fail;
struct brcmfmac_pd_cc *country_codes;
const char *board_type;
+ unsigned char mac[ETH_ALEN];
union {
struct brcmfmac_sdio_pd sdio;
} bus;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -7,6 +7,7 @@
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/inetdevice.h>
+#include <linux/property.h>
#include <net/cfg80211.h>
#include <net/rtnetlink.h>
#include <net/addrconf.h>
@@ -1226,7 +1227,8 @@ static int brcmf_bus_started(struct brcm
brcmf_dbg(TRACE, "\n");
/* add primary networking interface */
- ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL);
+ ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d",
+ is_valid_ether_addr(drvr->settings->mac) ? drvr->settings->mac : NULL);
if (IS_ERR(ifp))
return PTR_ERR(ifp);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -5,6 +5,7 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_net.h>
#include <defs.h>
#include "debug.h"
@@ -97,6 +98,8 @@ void brcmf_of_probe(struct device *dev,
if (err)
brcmf_err("failed to get OF country code map (err=%d)\n", err);
+ of_get_mac_address(np, settings->mac);
+
if (bus_type != BRCMF_BUSTYPE_SDIO)
return;