openwrt/target/linux/bcm47xx/legacy/config-default

CONFIG_ADM6996_PHY=y
CONFIG_B44=y
CONFIG_B44_PCI=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI_AUTOSELECT=y
# CONFIG_BCM47XX_BCMA is not set
# CONFIG_BCMA is not set
# CONFIG_SSB_DRIVER_GIGE is not set
bcm47xx: enable adm6996 only on legacy subtarget The generic subtarget supports only a few devices. None of these devices are equipped with a ADM6996 switch. On the mips74k subtarget, the driver for the adm6996 switch is disabled. So it seems that the ADM6996 driver should be enabled only on the legacy subtarget. Support for ADM6996 switches was enabled in commit 68081fc1c8c7814b1c064431eb2e364f9226801a. At the time when this driver was enabled the bcm47xx target had only one subtarget. Switches used by individual devices suported by the generic subtarget are listed below. Device Switch Edimax PS-1208MFG int. SoC Linksys WRT300N v1.1 Broadcom BCM5325 Linksys WRT310N v1 Broadcom BCM5397 Linksys WRT350N v1 Broadcom BCM5397 Linksys WRT610N v1 Broadcom BCM53115 Linksys WRT610N v2 Broadcom BCM53115 Linksys E3000 v1 Broadcom BCM53115 Reduce uncompressed kernel size by 8320 Bytes. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> 2022-12-17 23:26:19 +00:00			`CONFIG_ADM6996_PHY=y`
brcm47xx: add a "legacy" subtarget that is usable for low-end 802.11g devices like WRT54G Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41041 2014-06-07 15:19:40 +00:00			`CONFIG_B44=y`
			`CONFIG_B44_PCI=y`
			`CONFIG_B44_PCICORE_AUTOSELECT=y`
			`CONFIG_B44_PCI_AUTOSELECT=y`
			`# CONFIG_BCM47XX_BCMA is not set`
			`# CONFIG_BCMA is not set`
			`# CONFIG_SSB_DRIVER_GIGE is not set`