openwrt/target/linux/mediatek/patches-6.6/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch

From a969b663c866129ed9eb217785a6574fbe826f1d Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Thu, 6 Apr 2023 23:36:50 +0100
Subject: [PATCH] net: phy: mxl-gpy: don't use SGMII AN if using phylink

MAC drivers using phylink expect SGMII in-band-status to be switched off
when attached to a PHY. Make sure this is the case also for mxl-gpy which
keeps SGMII in-band-status in case of SGMII interface mode is used.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/phy/mxl-gpy.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -402,8 +402,11 @@ static bool gpy_2500basex_chk(struct phy
 
 	phydev->speed = SPEED_2500;
 	phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-	phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
-		       VSPEC1_SGMII_CTRL_ANEN, 0);
+
+	if (!phydev->phylink)
+		phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+			       VSPEC1_SGMII_CTRL_ANEN, 0);
+
 	return true;
 }
 
@@ -454,6 +457,14 @@ static int gpy_config_aneg(struct phy_de
 	u32 adv;
 	int ret;
 
+	/* Disable SGMII auto-negotiation if using phylink */
+	if (phydev->phylink) {
+		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+				     VSPEC1_SGMII_CTRL_ANEN, 0);
+		if (ret < 0)
+			return ret;
+	}
+
 	if (phydev->autoneg == AUTONEG_DISABLE) {
 		/* Configure half duplex with genphy_setup_forced,
 		 * because genphy_c45_pma_setup_forced does not support.
@@ -576,6 +587,8 @@ static int gpy_update_interface(struct p
 	switch (phydev->speed) {
 	case SPEED_2500:
 		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		if (phydev->phylink)
+			break;
 		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
 				     VSPEC1_SGMII_CTRL_ANEN, 0);
 		if (ret < 0) {
@@ -589,7 +602,7 @@ static int gpy_update_interface(struct p
 	case SPEED_100:
 	case SPEED_10:
 		phydev->interface = PHY_INTERFACE_MODE_SGMII;
-		if (gpy_sgmii_aneg_en(phydev))
+		if (phydev->phylink || gpy_sgmii_aneg_en(phydev))
 			break;
 		/* Enable and restart SGMII ANEG for 10/100/1000Mbps link speed
 		 * if ANEG is disabled (in 2500-BaseX mode).