ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 13:48:06 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
0dfb7529b7
openwrt/target/linux/armsr/modules.mk

322 lines
10 KiB
Makefile
Raw Normal View History

armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
define KernelPackage/acpi-mdio
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=ACPI MDIO support
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-mdio-devres
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
KCONFIG:=CONFIG_ACPI_MDIO
FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
endef
define KernelPackage/acpi-mdio/description
Kernel driver for ACPI MDIO support
endef
$(eval $(call KernelPackage,acpi-mdio))
armsr: armv8: add Broadcom GENET and MDIO modules These are used by common Broadcom SoC's like the BCM2711 (RPi4) and iProc network processor. Tested on the RPi4B using the Raspberry Pi UEFI+ACPI firmware[1]. Signed-off-by: Mathew McBride <matt@traverse.com.au> [1] - https://github.com/pftf/RPi4
2023-06-23 05:46:41 +00:00
define KernelPackage/bcmgenet
SUBMENU=$(NETWORK_DEVICES_MENU)
DEPENDS:=@(TARGET_armsr_armv8) +kmod-mdio-bcm-unimac
TITLE:=Broadcom GENET internal MAC (Raspberry Pi 4)
KCONFIG:=CONFIG_BCMGENET
FILES=$(LINUX_DIR)/drivers/net/ethernet/broadcom/genet/genet.ko
AUTOLOAD=$(call AutoLoad,30,genet)
endef
$(eval $(call KernelPackage,bcmgenet))
define KernelPackage/mdio-bcm-unimac
SUBMENU=$(NETWORK_DEVICES_MENU)
DEPENDS:=@(TARGET_armsr_armv8) +kmod-of-mdio
TITLE:=Broadcom UniMAC MDIO bus controller
KCONFIG:=CONFIG_MDIO_BCM_UNIMAC
FILES=$(LINUX_DIR)/drivers/net/mdio/mdio-bcm-unimac.ko
AUTOLOAD=$(call AutoLoad,30,mdio-bcm-unimac)
endef
$(eval $(call KernelPackage,mdio-bcm-unimac))
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
define KernelPackage/fsl-pcs-lynx
SUBMENU=$(NETWORK_DEVICES_MENU)
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-phylink
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
TITLE:=NXP (Freescale) Lynx PCS
HIDDEN:=1
KCONFIG:=CONFIG_PCS_LYNX
FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko
AUTOLOAD=$(call AutoLoad,30,pcs-lynx)
endef
$(eval $(call KernelPackage,fsl-pcs-lynx))
armvirt: 64: Add NXP i.MX 8M Mini/Nano/Quad/Plus EVK support Also includes Advantech RSB-3720 (iMX8 Plus) support. Signed-off-by: Anton Antonov <Anton.Antonov@arm.com> Signed-off-by: Mathew McBride <matt@traverse.com.au> [Re-sort into kernel config, move network into modules]
2023-05-30 02:55:16 +00:00
define KernelPackage/fsl-fec
SUBMENU:=$(NETWORK_DEVICES_MENU)
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio \
armvirt: 64: Add NXP i.MX 8M Mini/Nano/Quad/Plus EVK support Also includes Advantech RSB-3720 (iMX8 Plus) support. Signed-off-by: Anton Antonov <Anton.Antonov@arm.com> Signed-off-by: Mathew McBride <matt@traverse.com.au> [Re-sort into kernel config, move network into modules]
2023-05-30 02:55:16 +00:00
+kmod-ptp +kmod-net-selftests
TITLE:=NXP (Freescale) FEC Ethernet controller (i.MX)
KCONFIG:=CONFIG_FEC
FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/fec.ko
AUTOLOAD:=$(call AutoLoad,35,fec)
endef
$(eval $(call KernelPackage,fsl-fec))
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
define KernelPackage/fsl-xgmac-mdio
SUBMENU=$(NETWORK_DEVICES_MENU)
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
TITLE:=NXP (Freescale) MDIO bus
KCONFIG:=CONFIG_FSL_XGMAC_MDIO
FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
AUTOLOAD=$(call AutoLoad,30,xgmac_mdio)
endef
$(eval $(call KernelPackage,fsl-xgmac-mdio))
define KernelPackage/fsl-mc-dpio
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP DPAA2 DPIO (Data Path IO) driver
HIDDEN:=1
KCONFIG:=CONFIG_FSL_MC_BUS=y \
CONFIG_FSL_MC_DPIO
FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko
AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio)
endef
$(eval $(call KernelPackage,fsl-mc-dpio))
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
define KernelPackage/fsl-enetc-net
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=:NXP ENETC (LS1028A) Ethernet
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-fsl-pcs-lynx
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
KCONFIG:= \
CONFIG_FSL_ENETC \
CONFIG_FSL_ENETC_VF \
armsr: armv8: fix invalid symbol value for FSL_ENETC_QOS The kernel FSL_ENETC_QOS option is only a compile time option, it does not result in a separate module being built. Set it to 'y' to resolve a warning from the kernel compile: .config:2654:warning: symbol value 'm' invalid for FSL_ENETC_QOS Signed-off-by: Mathew McBride <matt@traverse.com.au> Fixes: c3151b6f045 ("armvirt: 64: add support for other SystemReady-compatible vendors")
2023-08-14 06:13:28 +00:00
CONFIG_FSL_ENETC_QOS=y
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
FILES:= \
$(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc.ko \
packages: remove remnants of kernels below 6.6 Remove remnants of kernels below 6.6. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Link: https://github.com/openwrt/openwrt/pull/16432 Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-09-21 07:19:11 +00:00
$(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-core.ko \
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
$(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-vf.ko \
$(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko \
$(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-ierb.ko
AUTOLOAD=$(call AutoLoad,35,fsl-enetc)
endef
$(eval $(call KernelPackage,fsl-enetc-net))
define KernelPackage/fsl-dpaa1-net
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=NXP DPAA1 (LS1043/LS1046) Ethernet
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
KCONFIG:= \
CONFIG_FSL_DPAA=y \
CONFIG_FSL_DPAA_ETH \
CONFIG_FSL_FMAN \
CONFIG_FSL_DPAA_CHECKING=n \
CONFIG_FSL_BMAN_TEST=n \
CONFIG_FSL_QMAN_TEST=n
MODULES:= \
$(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa/fsl_dpa.ko \
$(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_fman.ko \
$(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_mac.ko
AUTOLOAD=$(call AutoLoad,35,fsl-dpa)
endef
$(eval $(call KernelPackage,fsl-dpaa1-net))
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
define KernelPackage/fsl-dpaa2-net
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=NXP DPAA2 Ethernet
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-phylink \
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
+kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
KCONFIG:= \
CONFIG_FSL_MC_UAPI_SUPPORT=y \
CONFIG_FSL_DPAA2_ETH
FILES:= \
$(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko
AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth)
endef
$(eval $(call KernelPackage,fsl-dpaa2-net))
define KernelPackage/fsl-dpaa2-console
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP DPAA2 Debug console
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8)
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
KCONFIG:=CONFIG_DPAA2_CONSOLE
FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
endef
define KernelPackage/fsl-dpaa2-console/description
Kernel modules for the NXP DPAA2 debug consoles
(Management Complex and AIOP).
endef
$(eval $(call KernelPackage,fsl-dpaa2-console))
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
define KernelPackage/marvell-mdio
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Marvell Armada platform MDIO driver
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
KCONFIG:=CONFIG_MVMDIO
FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvmdio.ko
AUTOLOAD=$(call AutoLoad,30,marvell-mdio)
endef
$(eval $(call KernelPackage,marvell-mdio))
define KernelPackage/mvneta
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Marvell Armada 370/38x/XP/37xx network driver
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
KCONFIG:=CONFIG_MVNETA
FILES:=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvneta.ko
AUTOLOAD=$(call AutoLoad,30,mvneta)
endef
$(eval $(call KernelPackage,mvneta))
define KernelPackage/mvpp2
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Marvell Armada 375/7K/8K network driver
armsr: rename from armvirt Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-06-06 23:19:16 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
KCONFIG:=CONFIG_MVPP2 \
CONFIG_MVPP2_PTP=n
FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvpp2/mvpp2.ko
AUTOLOAD=$(call AutoLoad,40,mvpp2)
endef
$(eval $(call KernelPackage,mvpp2))
armvirt: 64: Add NXP i.MX 8M Mini/Nano/Quad/Plus EVK support Also includes Advantech RSB-3720 (iMX8 Plus) support. Signed-off-by: Anton Antonov <Anton.Antonov@arm.com> Signed-off-by: Mathew McBride <matt@traverse.com.au> [Re-sort into kernel config, move network into modules]
2023-05-30 02:55:16 +00:00
define KernelPackage/imx2-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP (Freescale) i.MX2+ and Layerscape watchdog driver
KCONFIG:=CONFIG_IMX2_WDT
FILES=$(LINUX_DIR)/drivers/watchdog/imx2_wdt.ko
AUTOLOAD=$(call AutoLoad,60,imx2_wdt)
endef
$(eval $(call KernelPackage,imx2-wdt))
define KernelPackage/imx7-ulp-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP (Freescale) i.MX7ULP and later watchdog
KCONFIG:=CONFIG_IMX7ULP_WDT
FILES=$(LINUX_DIR)/drivers/watchdog/imx7ulp_wdt.ko
AUTOLOAD=$(call AutoLoad,60,imx7ulp_wdt)
endef
$(eval $(call KernelPackage,imx7-ulp-wdt))
define KernelPackage/dwmac-imx
SUBMENU=$(NETWORK_DEVICES_MENU)
TITLE:=NXP i.MX8 Ethernet controller
package: kernel: detach of-mdio dependency from stmmac-core Detach of-mdio dependency from stmmac-core kmod to fix support for x86_64 target. This target doesn't use OpenFirmware infrastructure and stmmac-core for the dwmac-intel driver doesn't depends on it. Add kmod-of-mdio to any other user of stmmac-core as it's not inherit from stmmac-core anymore. Fixes: #14209 Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-12-13 16:03:13 +00:00
DEPENDS:=+kmod-stmmac-core +kmod-of-mdio
armvirt: 64: Add NXP i.MX 8M Mini/Nano/Quad/Plus EVK support Also includes Advantech RSB-3720 (iMX8 Plus) support. Signed-off-by: Anton Antonov <Anton.Antonov@arm.com> Signed-off-by: Mathew McBride <matt@traverse.com.au> [Re-sort into kernel config, move network into modules]
2023-05-30 02:55:16 +00:00
KCONFIG:=CONFIG_DWMAC_IMX8
FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.ko
AUTOLOAD=$(call AutoLoad,45,dwmac-imx)
endef
$(eval $(call KernelPackage,dwmac-imx))
armvirt: 64: add Allwinner A3/A83T/A64 (sun8i family) Ethernet Add support for the dwmac (stmmac) variant used by Allwinner Arm64 boards. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-03-20 02:53:31 +00:00
define KernelPackage/dwmac-sun8i
SUBMENU=$(NETWORK_DEVICES_MENU)
TITLE:=Allwinner H3/A83T/A64 (sun8i) Ethernet
package: kernel: detach of-mdio dependency from stmmac-core Detach of-mdio dependency from stmmac-core kmod to fix support for x86_64 target. This target doesn't use OpenFirmware infrastructure and stmmac-core for the dwmac-intel driver doesn't depends on it. Add kmod-of-mdio to any other user of stmmac-core as it's not inherit from stmmac-core anymore. Fixes: #14209 Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-12-13 16:03:13 +00:00
DEPENDS:=+kmod-stmmac-core +kmod-of-mdio +kmod-mdio-bus-mux
armvirt: 64: add Allwinner A3/A83T/A64 (sun8i family) Ethernet Add support for the dwmac (stmmac) variant used by Allwinner Arm64 boards. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-03-20 02:53:31 +00:00
KCONFIG:=CONFIG_DWMAC_SUN8I
FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.ko
AUTOLOAD=$(call AutoLoad,45,dwmac-sun8i)
endef
$(eval $(call KernelPackage,dwmac-sun8i))
armvirt: package and select Rockchip DWMAC Ethernet driver For devices that implement the "rockchip,*-gmac" compatible controller, including: - RK3328 - RK3399 - RK3568 - RK3588 - PX30 Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-04-18 03:34:23 +00:00
define KernelPackage/dwmac-rockchip
SUBMENU=$(NETWORK_DEVICES_MENU)
TITLE:=Rockchip RK3328/RK3399/RK3568 Ethernet
package: kernel: detach of-mdio dependency from stmmac-core Detach of-mdio dependency from stmmac-core kmod to fix support for x86_64 target. This target doesn't use OpenFirmware infrastructure and stmmac-core for the dwmac-intel driver doesn't depends on it. Add kmod-of-mdio to any other user of stmmac-core as it's not inherit from stmmac-core anymore. Fixes: #14209 Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-12-13 16:03:13 +00:00
DEPENDS:=+kmod-stmmac-core +kmod-of-mdio +kmod-mdio-bus-mux
armvirt: package and select Rockchip DWMAC Ethernet driver For devices that implement the "rockchip,*-gmac" compatible controller, including: - RK3328 - RK3399 - RK3568 - RK3588 - PX30 Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-04-18 03:34:23 +00:00
KCONFIG:=CONFIG_DWMAC_ROCKCHIP
FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.ko
AUTOLOAD=$(call AutoLoad,45,dwmac-rk)
endef
$(eval $(call KernelPackage,dwmac-rockchip))
armsr: armv8: package and select MDIO driver for Thunder SoC's This MDIO driver was already being built, but not installed due to being selected by the ThunderX Ethernet driver. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-08-09 07:20:07 +00:00
define KernelPackage/mdio-thunder
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Marvell (Cavium) Thunder MDIO controller
DEPENDS:=@(TARGET_armsr_armv8) +kmod-of-mdio
KCONFIG:=CONFIG_MDIO_THUNDER
FILES=$(LINUX_DIR)/drivers/net/mdio/mdio-cavium.ko \
$(LINUX_DIR)/drivers/net/mdio/mdio-thunder.ko
AUTOLOAD=$(call AutoLoad,30,mdio-cavium mdio-thunder)
endef
$(eval $(call KernelPackage,mdio-thunder))
armvirt: 64: add Marvell (formerly Cavium) ThunderX series network driver Based on working configuration supplied by Anton Antonov. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-02-11 03:58:09 +00:00
define KernelPackage/thunderx-net
SUBMENU:=$(NETWORK_DEVICES_MENU)
armsr: add Marvell (Cavium) ThunderX2 network driver The initial armv8 module incorrectly labelled the Thunder(v1) as supporting the ThunderX2, when they have different drivers. Add kmod-octeon-tx2 to support the newer devices. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-08-09 06:36:39 +00:00
TITLE:=Marvell (Cavium) Thunder network drivers
armsr: armv8: package and select MDIO driver for Thunder SoC's This MDIO driver was already being built, but not installed due to being selected by the ThunderX Ethernet driver. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-08-09 07:20:07 +00:00
DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-mdio-thunder
armvirt: 64: add Marvell (formerly Cavium) ThunderX series network driver Based on working configuration supplied by Anton Antonov. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-02-11 03:58:09 +00:00
KCONFIG:=CONFIG_NET_VENDOR_CAVIUM \
CONFIG_THUNDER_NIC_PF \
CONFIG_THUNDER_NIC_VF \
CONFIG_THUNDER_NIC_BGX \
CONFIG_THUNDER_NIC_RGX
FILES=$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicvf.ko \
$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicpf.ko \
$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_xcv.ko \
$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_bgx.ko
AUTOLOAD=$(call AutoLoad,40,nicpf nicvf thunder_xcv thunder_bgx)
endef
$(eval $(call KernelPackage,thunderx-net))
armsr: add Marvell (Cavium) ThunderX2 network driver The initial armv8 module incorrectly labelled the Thunder(v1) as supporting the ThunderX2, when they have different drivers. Add kmod-octeon-tx2 to support the newer devices. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-08-09 06:36:39 +00:00
define KernelPackage/octeontx2-net
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Marvell (Cavium) ThunderX2 network drivers
DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-of-mdio +kmod-macsec \
+kmod-ptp
KCONFIG:=CONFIG_OCTEONTX2_MBOX \
CONFIG_OCTEONTX2_AF \
CONFIG_OCTEONTX2_PF \
CONFIG_OCTEONTX2_VF \
CONFIG_NDC_DIS_DYNAMIC_CACHING=n
FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/octeontx2/af/rvu_mbox.ko \
$(LINUX_DIR)/drivers/net/ethernet/marvell/octeontx2/af/rvu_af.ko \
$(LINUX_DIR)/drivers/net/ethernet/marvell/octeontx2/nic/rvu_nicpf.ko \
$(LINUX_DIR)/drivers/net/ethernet/marvell/octeontx2/nic/rvu_nicvf.ko \
$(LINUX_DIR)/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.ko
AUTOLOAD=$(call AutoLoad,40,rvu_af rvu_mbox rvu_nicpf rvu_nicvf otx2_ptp)
endef
$(eval $(call KernelPackage,octeontx2-net))
kernel: armsr: Renesas: RZ: Ethernet module and ttySC0 Ethernet module enable for Renesas RZ platform inittab fix for ttySC0 Fixes: #15284 Signed-off-by: John Vincent <john.vincent.xa@bp.renesas.com>
2024-05-31 13:56:24 +00:00
define KernelPackage/renesas-net-avb
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Renesas network drivers
DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-mii +kmod-ptp +kmod-libphy +kmod-mdio-gpio
KCONFIG:=CONFIG_RAVB
FILES=$(LINUX_DIR)/drivers/net/ethernet/renesas/ravb.ko
AUTOLOAD:=$(call AutoProbe,ravb)
endef
define KernelPackage/renesas-net-avb/description
Support Renesas RZ platform Ethernet module
endef
$(eval $(call KernelPackage,renesas-net-avb))
armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2023-05-31 05:47:41 +00:00
define KernelPackage/wdt-sp805
SUBMENU:=$(OTHER_MENU)
TITLE:=ARM SP805 Watchdog
KCONFIG:=CONFIG_ARM_SP805_WATCHDOG
FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko
AUTOLOAD=$(call AutoLoad,50,sp805_wdt)
endef
define KernelPackage/wdt-sp805/description
Support for the ARM SP805 wathchdog module.
This is present in the NXP Layerscape family,
HiSilicon HI3660 among others.
endef
$(eval $(call KernelPackage,wdt-sp805))
armvirt: 64: add support for other SystemReady-compatible vendors These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au>
2022-07-15 02:38:02 +00:00
Reference in New Issue Copy Permalink