openwrt/package/boot/uboot-mediatek/patches/350-add-support-for-Winbond-W25Q512JV.patch

--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -376,6 +376,8 @@ const struct flash_info spi_nor_ids[] =
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
 	{ INFO("w25q256", 0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ INFO("w25q512jv", 0xef4020, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ |
+			SPI_NOR_HAS_TB | SPI_NOR_HAS_LOCK) },
 	{ INFO("w25m512jw", 0xef6119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ INFO("w25m512jv", 0xef7119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 #endif
uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2021-04-02 11:05:15 +00:00			`--- a/drivers/mtd/spi/spi-nor-ids.c`
			`+++ b/drivers/mtd/spi/spi-nor-ids.c`
uboot-mediatek: update to 2022.07 release Add patch to fix host-build of the mkimage tool without CONFIG_TOOLS_LIBCRYPTO. Update and refresh all patches. Tested on BananaPi R64 (MT7622) successfully booting from SD card, eMMC and SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2022-07-11 10:02:49 +00:00			`@@ -376,6 +376,8 @@ const struct flash_info spi_nor_ids[] =`
uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2021-04-02 11:05:15 +00:00			`SPI_NOR_HAS_LOCK \| SPI_NOR_HAS_TB)`
			`},`
			`{ INFO("w25q256", 0xef4019, 0, 64 * 1024, 512, SECT_4K \| SPI_NOR_DUAL_READ \| SPI_NOR_QUAD_READ) },`
			`+ { INFO("w25q512jv", 0xef4020, 0, 64 * 1024, 1024, SECT_4K \| SPI_NOR_QUAD_READ \| SPI_NOR_DUAL_READ \|`
			`+ SPI_NOR_HAS_TB \| SPI_NOR_HAS_LOCK) },`
			`{ INFO("w25m512jw", 0xef6119, 0, 64 * 1024, 1024, SECT_4K \| SPI_NOR_DUAL_READ \| SPI_NOR_QUAD_READ) },`
			`{ INFO("w25m512jv", 0xef7119, 0, 64 * 1024, 1024, SECT_4K \| SPI_NOR_DUAL_READ \| SPI_NOR_QUAD_READ) },`
			`#endif`