openwrt/target/linux/lantiq/base-files/sbin/dsl_notify.sh

#!/bin/sh
#
# This script is called by dsl_cpe_control whenever there is a DSL event
# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.

exec /sbin/hotplug-call dsl
Initial DSL framework - Removed ifx_cpe_control_init.sh (the old init script) - Created dsl_control (/etc/init.d) - tidied up start and stop - stop calls dsl_notify before killing daemon - has status and lucistat options to provide detail - copes with daemon not running situation - Updated package makefile to use new init script and to build cli support - Provide a dsl_notify.sh script to cope with line up/down events Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk> SVN-Revision: 29881 2012-01-24 11:31:23 +00:00			`#!/bin/sh`
			`#`
lantiq: split up dsl_notify.sh into separate notification handlers This makes it possible to simply add additional notification handlers by putting new scripts in the /etc/hotplug.d/dsl directory. the following Environment Variables are used: (values marked with an * are only available when bonding support is compiled in) DSL_NOTIFICATION_TYPE with one of these values: - DSL_STATUS - DSL_INTERFACE_STATUS - DSL_DATARATE_STATUS_US - DSL_DATARATE_STATUS_DS DSL_LINE_NUMBER=<0\|1> * If DSL_NOTIFICATION_TYPE == DSL_STATUS, these variables are set: - DSL_XTU_STATUS=<ADSL\|VDSL> - DSL_TC_LAYER_STATUS=<ATM\|EFM> - DSL_EFM_TC_CONFIG_US=<NORMAL\|PRE_EMPTION> - DSL_EFM_TC_CONFIG_DS=<NORMAL> If DSL_NOTIFICATION_TYPE == DSL_INTERFACE_STATUS, these variables are set: - DSL_INTERFACE_STATUS=<DOWN\|READY\|HANDSHAKE\|TRAINING\|UP> - DSL_BONDING_STATUS=<INACTIVE\|ACTIVE> * If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_US, these variables are set: - DSL_DATARATE_US_BC0=<Upstream data rate in bit/s for Channel 0> - DSL_DATARATE_US_BC1=<Upstream data rate in bit/s for Channel 1> * If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_DS, these variables are set: - DSL_DATARATE_DS_BC0=<Downstream data rate in bit/s for Channel 0> - DSL_DATARATE_DS_BC1=<Downstream data rate in bit/s for Channel 1> * Signed-off-by: Martin Schiller <ms@dev.tdt.de> 2017-06-29 06:49:49 +02:00			`# This script is called by dsl_cpe_control whenever there is a DSL event`
			`# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.`
ltq-vdsl: add led status reporting Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40322 2014-03-30 09:16:27 +00:00
lantiq: split up dsl_notify.sh into separate notification handlers This makes it possible to simply add additional notification handlers by putting new scripts in the /etc/hotplug.d/dsl directory. the following Environment Variables are used: (values marked with an * are only available when bonding support is compiled in) DSL_NOTIFICATION_TYPE with one of these values: - DSL_STATUS - DSL_INTERFACE_STATUS - DSL_DATARATE_STATUS_US - DSL_DATARATE_STATUS_DS DSL_LINE_NUMBER=<0\|1> * If DSL_NOTIFICATION_TYPE == DSL_STATUS, these variables are set: - DSL_XTU_STATUS=<ADSL\|VDSL> - DSL_TC_LAYER_STATUS=<ATM\|EFM> - DSL_EFM_TC_CONFIG_US=<NORMAL\|PRE_EMPTION> - DSL_EFM_TC_CONFIG_DS=<NORMAL> If DSL_NOTIFICATION_TYPE == DSL_INTERFACE_STATUS, these variables are set: - DSL_INTERFACE_STATUS=<DOWN\|READY\|HANDSHAKE\|TRAINING\|UP> - DSL_BONDING_STATUS=<INACTIVE\|ACTIVE> * If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_US, these variables are set: - DSL_DATARATE_US_BC0=<Upstream data rate in bit/s for Channel 0> - DSL_DATARATE_US_BC1=<Upstream data rate in bit/s for Channel 1> * If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_DS, these variables are set: - DSL_DATARATE_DS_BC0=<Downstream data rate in bit/s for Channel 0> - DSL_DATARATE_DS_BC1=<Downstream data rate in bit/s for Channel 1> * Signed-off-by: Martin Schiller <ms@dev.tdt.de> 2017-06-29 06:49:49 +02:00			`exec /sbin/hotplug-call dsl`