ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 01:11:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
088e28772c
openwrt/target/linux/lantiq/patches-4.9/0065-MIPS-lantiq-improve-USB-initialization.patch

203 lines
7.1 KiB
Diff
Raw Normal View History

lantiq: add support for kernel 4.9 The following patches were dropped because they are already applied upstream: 0012-pinctrl-lantiq-fix-up-pinmux.patch 0013-MTD-lantiq-xway-fix-invalid-operator.patch 0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch 0015-MTD-lantiq-xway-remove-endless-loop.patch 0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch 0017-MTD-xway-fix-nand-locking.patch 0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch 0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch 0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch 0047-irq-fixes.patch 0047-mtd-plat-nand-pass-of-node.patch 0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch 0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch 0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch 122-MIPS-store-the-appended-dtb-address-in-a-variable.patch The PHY driver was reduced to the code adding the LED configuration, the rest is already upstream: 0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch The SPI driver was replaced with the version pending for upstream inclusion: New driver: 0090-spi-add-transfer_status-callback.patch 0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch Old driver: 0100-spi-add-support-for-Lantiq-SPI-controller.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 14:52:41 +00:00
From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 6 Jan 2017 17:40:12 +0100
Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
This adds code to initialize the USB controller and PHY also on Danube,
Amazon SE and AR10. This code is based on the Vendor driver from
different UGW versions and compared to the hardware documentation.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++----------
arch/mips/lantiq/xway/sysctrl.c | 20 +++++++
2 files changed, 110 insertions(+), 30 deletions(-)
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -72,6 +72,8 @@
#define RCU_USBCFG_HDSEL_BIT BIT(11)
#define RCU_USBCFG_HOST_END_BIT BIT(10)
#define RCU_USBCFG_SLV_END_BIT BIT(9)
+#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17)
+
/* USB reset bits */
#define RCU_USBRESET 0x0010
@@ -85,6 +87,8 @@
#define RCU_CFG1A 0x0038
#define RCU_CFG1B 0x003C
+#define RCU_CFG1_TX_PEE BIT(0)
+#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */
/* USB PMU devices */
#define PMU_AHBM BIT(15)
@@ -306,38 +310,91 @@ static void ltq_usb_init(void)
/* Power for USB cores 1 & 2 */
ltq_pmu_enable(PMU_AHBM);
ltq_pmu_enable(PMU_USB0);
- ltq_pmu_enable(PMU_USB1);
- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
+ if (of_machine_is_compatible("lantiq,ar10") ||
+ of_machine_is_compatible("lantiq,grx390") ||
+ of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9"))
+ ltq_pmu_enable(PMU_USB1);
+
+ if (of_machine_is_compatible("lantiq,vr9") ||
+ of_machine_is_compatible("lantiq,ar10")) {
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE |
+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE |
+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B);
+ }
/* Enable USB PHY power for cores 1 & 2 */
ltq_pmu_enable(PMU_USB0_P);
- ltq_pmu_enable(PMU_USB1_P);
+ if (of_machine_is_compatible("lantiq,ar10") ||
+ of_machine_is_compatible("lantiq,grx390") ||
+ of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9"))
+ ltq_pmu_enable(PMU_USB1_P);
+
+ if (of_machine_is_compatible("lantiq,ase") ||
+ of_machine_is_compatible("lantiq,danube")) {
+ /* Configure cores to host mode */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB1CFG);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+ }
+
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ /* Configure cores to host mode */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB2CFG);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+ }
+
+ if (of_machine_is_compatible("lantiq,vr9") ||
+ of_machine_is_compatible("lantiq,ar10")) {
+ /* Configure cores to host mode */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB2CFG);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+ }
+
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ /* Hard reset USB state machines */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
+ | USBRESET_BIT | BIT(28), RCU_USBRESET);
+ udelay(50 * 1000);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
+ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET);
+ } else {
+ /* Hard reset USB state machines */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
+ udelay(50 * 1000);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
+ }
- /* Configure cores to host mode */
- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
- RCU_USB1CFG);
- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
- RCU_USB2CFG);
-
- /* Select DMA endianness (Host-endian: big-endian) */
- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-
- /* Hard reset USB state machines */
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
- udelay(50 * 1000);
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
-
- /* Soft reset USB state machines */
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
- udelay(50 * 1000);
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
+ if (of_machine_is_compatible("lantiq,vr9")) {
+ /* Soft reset USB state machines */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
+ udelay(50 * 1000);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
+ }
}
static int __init mips_reboot_setup(void)
@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void
if (!ltq_rcu_membase)
panic("Failed to remap core memory");
- if (of_machine_is_compatible("lantiq,ar9") ||
- of_machine_is_compatible("lantiq,vr9"))
+ if (of_machine_is_compatible("lantiq,danube") ||
+ of_machine_is_compatible("lantiq,ase") ||
+ of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9") ||
+ of_machine_is_compatible("lantiq,ar10"))
ltq_usb_init();
if (of_machine_is_compatible("lantiq,vr9"))
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk)
pr_warn("deactivating PMU module failed!");
}
+static void usb_set_clock(void)
+{
+ unsigned int val = ltq_cgu_r32(ifccr);
+
+ if (of_machine_is_compatible("lantiq,ar10") ||
+ of_machine_is_compatible("lantiq,grx390")) {
+ val &= ~0x03; /* XTAL divided by 3 */
+ } else if (of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9")) {
+ /* TODO: this depends on the XTAL frequency */
+ val |= 0x03; /* XTAL divided by 3 */
+ } else if (of_machine_is_compatible("lantiq,ase")) {
+ val |= 0x20; /* from XTAL */
+ } else if (of_machine_is_compatible("lantiq,danube")) {
+ val |= 0x30; /* 12 MHz, generated from 36 MHz */
+ }
+ ltq_cgu_w32(val, ifccr);
+}
+
/* the pci enable helper */
static int pci_enable(struct clk *clk)
{
@@ -608,4 +627,5 @@ void __init ltq_soc_init(void)
if (of_machine_is_compatible("lantiq,vr9"))
xbar_fpi_burst_disable();
+ usb_set_clock();
}
Reference in New Issue Copy Permalink