mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
51 lines
2.2 KiB
Diff
51 lines
2.2 KiB
Diff
|
From b01d622d76134e9401970ffd3fbbb9a7051f976a Mon Sep 17 00:00:00 2001
|
||
|
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
|
||
|
Date: Tue, 20 Sep 2022 14:11:54 +0200
|
||
|
Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers
|
||
|
before USB 3.0 power on
|
||
|
MIME-Version: 1.0
|
||
|
Content-Type: text/plain; charset=UTF-8
|
||
|
Content-Transfer-Encoding: 8bit
|
||
|
|
||
|
Turris MOX board with older ARM Trusted Firmware version v1.5 is not able
|
||
|
to detect any USB 3.0 device connected to USB-A port on Mox-A module after
|
||
|
commit 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken
|
||
|
reset support"). On the other hand USB 2.0 devices connected to the same
|
||
|
USB-A port are working fine.
|
||
|
|
||
|
It looks as if the older firmware configures COMPHY registers for USB 3.0
|
||
|
somehow incompatibly for kernel driver. Experiments show that resetting
|
||
|
COMPHY registers via setting SFT_RST auto-clearing bit in COMPHY_SFT_RESET
|
||
|
register fixes this issue.
|
||
|
|
||
|
Reset the COMPHY in mvebu_a3700_comphy_usb3_power_on() function as a first
|
||
|
step after selecting COMPHY lane and USB 3.0 function. With this change
|
||
|
Turris MOX board can successfully detect USB 3.0 devices again.
|
||
|
|
||
|
Before the above mentioned commit this reset was implemented in PHY reset
|
||
|
method, so this is the reason why there was no issue with older firmware
|
||
|
version then.
|
||
|
|
||
|
Fixes: 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support")
|
||
|
Reported-by: Marek Behún <kabel@kernel.org>
|
||
|
Signed-off-by: Pali Rohár <pali@kernel.org>
|
||
|
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
|
||
|
Link: https://lore.kernel.org/r/20220920121154.30115-1-pali@kernel.org
|
||
|
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
||
|
---
|
||
|
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 +++
|
||
|
1 file changed, 3 insertions(+)
|
||
|
|
||
|
--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
|
||
|
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
|
||
|
@@ -826,6 +826,9 @@ mvebu_a3700_comphy_usb3_power_on(struct
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
+ /* COMPHY register reset (cleared automatically) */
|
||
|
+ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST);
|
||
|
+
|
||
|
/*
|
||
|
* 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The
|
||
|
* register belong to UTMI module, so it is set in UTMI phy driver.
|