openwrt/target/linux/layerscape/patches-4.14/803-flextimer-support-layerscape.patch

From d586effc9b71ddf240fb294b1ab1205bbe6fec4b Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Tue, 30 Oct 2018 18:26:32 +0800
Subject: [PATCH 20/40] flextimer: support layerscape
This is an integrated patch of flextimer for layerscape

Signed-off-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
 .../bindings/soc/fsl/layerscape/ftm-alarm.txt |  32 ++
 drivers/clocksource/fsl_ftm_timer.c           |   8 +-
 drivers/soc/fsl/layerscape/ftm_alarm.c        | 375 ++++++++++++++++++
 3 files changed, 411 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/layerscape/ftm-alarm.txt
 create mode 100644 drivers/soc/fsl/layerscape/ftm_alarm.c

--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/layerscape/ftm-alarm.txt
@@ -0,0 +1,32 @@
+Freescale FlexTimer Module (FTM) Alarm
+
+Required properties:
+
+- compatible : Should be "fsl,ftm-alarm" or "fsl,<chip>-ftm-alarm", the
+	       supported chips include
+	       "fsl,ls1012a-ftm-alarm"
+	       "fsl,ls1021a-ftm-alarm"
+	       "fsl,ls1043a-ftm-alarm"
+	       "fsl,ls1046a-ftm-alarm"
+	       "fsl,ls1088a-ftm-alarm"
+	       "fsl,ls208xa-ftm-alarm"
+- reg : Specifies base physical address and size of the register sets for the
+  FlexTimer Module and base physical address of IP Powerdown Exception Control
+  Register.
+- reg-names: names of the mapped memory regions listed in regs property.
+  should include the following entries:
+  "ftm":    Address of the register sets for FlexTimer Module
+  "pmctrl": Address of IP Powerdown Exception Control register
+- interrupts : Should be the FlexTimer Module interrupt.
+- big-endian: If the host controller is big-endian mode, specify this property.
+  The default endian mode is little-endian.
+
+Example:
+ftm0: ftm0@29d0000 {
+	compatible = "fsl,ls1043a-ftm-alarm";
+	reg = <0x0 0x29d0000 0x0 0x10000>,
+	      <0x0 0x1ee2140 0x0 0x4>;
+	reg-names = "ftm", "pmctrl";
+	interrupts = <0 86 0x4>;
+	big-endian;
+};
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -83,11 +83,11 @@ static inline void ftm_counter_disable(v
 
 static inline void ftm_irq_acknowledge(void __iomem *base)
 {
-	u32 val;
+	unsigned int timeout = 100;
 
-	val = ftm_readl(base + FTM_SC);
-	val &= ~FTM_SC_TOF;
-	ftm_writel(val, base + FTM_SC);
+	while ((FTM_SC_TOF & ftm_readl(base + FTM_SC)) && timeout--)
+		ftm_writel(ftm_readl(base + FTM_SC) & (~FTM_SC_TOF),
+			   base + FTM_SC);
 }
 
 static inline void ftm_irq_enable(void __iomem *base)
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/ftm_alarm.c
@@ -0,0 +1,375 @@
+/*
+ * Freescale FlexTimer Module (FTM) Alarm driver.
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+
+#define FTM_SC			0x00
+#define FTM_SC_CLK_SHIFT	3
+#define FTM_SC_CLK_MASK		(0x3 << FTM_SC_CLK_SHIFT)
+#define FTM_SC_CLK(c)		((c) << FTM_SC_CLK_SHIFT)
+#define FTM_SC_PS_MASK		0x7
+#define FTM_SC_TOIE		BIT(6)
+#define FTM_SC_TOF		BIT(7)
+
+#define FTM_SC_CLKS_FIXED_FREQ	0x02
+
+#define FTM_CNT			0x04
+#define FTM_MOD			0x08
+#define FTM_CNTIN		0x4C
+
+#define FIXED_FREQ_CLK		32000
+#define MAX_FREQ_DIV		(1 << FTM_SC_PS_MASK)
+#define MAX_COUNT_VAL		0xffff
+
+static void __iomem *ftm1_base;
+static void __iomem *rcpm_ftm_addr;
+static void __iomem *scfg_scrachpad_addr;
+static u32 alarm_freq;
+static bool big_endian;
+
+enum pmu_endian_type {
+	BIG_ENDIAN,
+	LITTLE_ENDIAN,
+};
+
+struct rcpm_cfg {
+	enum pmu_endian_type big_endian; /* Big/Little endian of PMU module */
+	u32 flextimer_set_bit;	/* FTM is not powerdown during device LPM20 */
+};
+
+static struct rcpm_cfg ls1012a_rcpm_cfg = {
+	.big_endian = BIG_ENDIAN,
+	.flextimer_set_bit = 0x20000,
+};
+
+static struct rcpm_cfg ls1021a_rcpm_cfg = {
+	.big_endian = BIG_ENDIAN,
+	.flextimer_set_bit = 0x30000000,
+};
+
+static struct rcpm_cfg ls1043a_rcpm_cfg = {
+	.big_endian = BIG_ENDIAN,
+	.flextimer_set_bit = 0x20000,
+};
+
+static struct rcpm_cfg ls1046a_rcpm_cfg = {
+	.big_endian = BIG_ENDIAN,
+	.flextimer_set_bit = 0x20000,
+};
+
+static struct rcpm_cfg ls1088a_rcpm_cfg = {
+	.big_endian = LITTLE_ENDIAN,
+	.flextimer_set_bit = 0x4000,
+};
+
+static struct rcpm_cfg ls208xa_rcpm_cfg = {
+	.big_endian = LITTLE_ENDIAN,
+	.flextimer_set_bit = 0x4000,
+};
+
+static const struct of_device_id ippdexpcr_of_match[] = {
+	{ .compatible = "fsl,ls1012a-ftm-alarm", .data = &ls1012a_rcpm_cfg},
+	{ .compatible = "fsl,ls1021a-ftm-alarm", .data = &ls1021a_rcpm_cfg},
+	{ .compatible = "fsl,ls1043a-ftm-alarm", .data = &ls1043a_rcpm_cfg},
+	{ .compatible = "fsl,ls1046a-ftm-alarm", .data = &ls1046a_rcpm_cfg},
+	{ .compatible = "fsl,ls1088a-ftm-alarm", .data = &ls1088a_rcpm_cfg},
+	{ .compatible = "fsl,ls208xa-ftm-alarm", .data = &ls208xa_rcpm_cfg},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ippdexpcr_of_match);
+
+static inline u32 ftm_readl(void __iomem *addr)
+{
+	if (big_endian)
+		return ioread32be(addr);
+
+	return ioread32(addr);
+}
+
+static inline void ftm_writel(u32 val, void __iomem *addr)
+{
+	if (big_endian)
+		iowrite32be(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
+static inline void ftm_counter_enable(void __iomem *base)
+{
+	u32 val;
+
+	/* select and enable counter clock source */
+	val = ftm_readl(base + FTM_SC);
+	val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK);
+	val |= (FTM_SC_PS_MASK | FTM_SC_CLK(FTM_SC_CLKS_FIXED_FREQ));
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_counter_disable(void __iomem *base)
+{
+	u32 val;
+
+	/* disable counter clock source */
+	val = ftm_readl(base + FTM_SC);
+	val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK);
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_acknowledge(void __iomem *base)
+{
+	unsigned int timeout = 100;
+
+	while ((FTM_SC_TOF & ftm_readl(base + FTM_SC)) && timeout--)
+		ftm_writel(ftm_readl(base + FTM_SC) & (~FTM_SC_TOF),
+			   base + FTM_SC);
+}
+
+static inline void ftm_irq_enable(void __iomem *base)
+{
+	u32 val;
+
+	val = ftm_readl(base + FTM_SC);
+	val |= FTM_SC_TOIE;
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_disable(void __iomem *base)
+{
+	u32 val;
+
+	val = ftm_readl(base + FTM_SC);
+	val &= ~FTM_SC_TOIE;
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_reset_counter(void __iomem *base)
+{
+	/*
+	 * The CNT register contains the FTM counter value.
+	 * Reset clears the CNT register. Writing any value to COUNT
+	 * updates the counter with its initial value, CNTIN.
+	 */
+	ftm_writel(0x00, base + FTM_CNT);
+}
+
+static u32 time_to_cycle(unsigned long time)
+{
+	u32 cycle;
+
+	cycle = time * alarm_freq;
+	if (cycle > MAX_COUNT_VAL) {
+		pr_err("Out of alarm range.\n");
+		cycle = 0;
+	}
+
+	return cycle;
+}
+
+static u32 cycle_to_time(u32 cycle)
+{
+	return cycle / alarm_freq + 1;
+}
+
+static void ftm_clean_alarm(void)
+{
+	ftm_counter_disable(ftm1_base);
+
+	ftm_writel(0x00, ftm1_base + FTM_CNTIN);
+	ftm_writel(~0U, ftm1_base + FTM_MOD);
+
+	ftm_reset_counter(ftm1_base);
+}
+
+static int ftm_set_alarm(u64 cycle)
+{
+	ftm_irq_disable(ftm1_base);
+
+	/*
+	 * The counter increments until the value of MOD is reached,
+	 * at which point the counter is reloaded with the value of CNTIN.
+	 * The TOF (the overflow flag) bit is set when the FTM counter
+	 * changes from MOD to CNTIN. So we should using the cycle - 1.
+	 */
+	ftm_writel(cycle - 1, ftm1_base + FTM_MOD);
+
+	ftm_counter_enable(ftm1_base);
+
+	ftm_irq_enable(ftm1_base);
+
+	return 0;
+}
+
+static irqreturn_t ftm_alarm_interrupt(int irq, void *dev_id)
+{
+	ftm_irq_acknowledge(ftm1_base);
+	ftm_irq_disable(ftm1_base);
+	ftm_clean_alarm();
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t ftm_alarm_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	u32 count, val;
+
+	count = ftm_readl(ftm1_base + FTM_MOD);
+	val = ftm_readl(ftm1_base + FTM_CNT);
+	val = (count & MAX_COUNT_VAL) - val;
+	val = cycle_to_time(val);
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t ftm_alarm_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	u32 cycle;
+	unsigned long time;
+
+	if (kstrtoul(buf, 0, &time))
+		return -EINVAL;
+
+	ftm_clean_alarm();
+
+	cycle = time_to_cycle(time);
+	if (!cycle)
+		return -EINVAL;
+
+	ftm_set_alarm(cycle);
+
+	return count;
+}
+
+static struct device_attribute ftm_alarm_attributes = __ATTR(ftm_alarm, 0644,
+			ftm_alarm_show, ftm_alarm_store);
+
+static int ftm_alarm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *r;
+	int irq;
+	int ret;
+	struct rcpm_cfg *rcpm_cfg;
+	u32 ippdexpcr, flextimer;
+	const struct of_device_id *of_id;
+	enum pmu_endian_type endian;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	ftm1_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(ftm1_base))
+		return PTR_ERR(ftm1_base);
+
+	of_id = of_match_node(ippdexpcr_of_match, np);
+	if (!of_id)
+		return -ENODEV;
+
+	rcpm_cfg = devm_kzalloc(&pdev->dev, sizeof(*rcpm_cfg), GFP_KERNEL);
+	if (!rcpm_cfg)
+		return -ENOMEM;
+
+	rcpm_cfg = (struct rcpm_cfg *)of_id->data;
+	endian = rcpm_cfg->big_endian;
+	flextimer = rcpm_cfg->flextimer_set_bit;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pmctrl");
+	if (r) {
+		rcpm_ftm_addr = devm_ioremap_resource(&pdev->dev, r);
+		if (IS_ERR(rcpm_ftm_addr))
+			return PTR_ERR(rcpm_ftm_addr);
+		if (endian == BIG_ENDIAN)
+			ippdexpcr = ioread32be(rcpm_ftm_addr);
+		else
+			ippdexpcr = ioread32(rcpm_ftm_addr);
+		ippdexpcr |= flextimer;
+		if (endian == BIG_ENDIAN)
+			iowrite32be(ippdexpcr, rcpm_ftm_addr);
+		else
+			iowrite32(ippdexpcr, rcpm_ftm_addr);
+
+		r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "scrachpad");
+		if (r) {
+			scfg_scrachpad_addr = devm_ioremap_resource(&pdev->dev, r);
+			iowrite32(ippdexpcr, scfg_scrachpad_addr);
+		}
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0) {
+		pr_err("ftm: unable to get IRQ from DT, %d\n", irq);
+		return -EINVAL;
+	}
+
+	big_endian = of_property_read_bool(np, "big-endian");
+
+	ret = devm_request_irq(&pdev->dev, irq, ftm_alarm_interrupt,
+			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		return ret;
+	}
+
+	ret = device_create_file(&pdev->dev, &ftm_alarm_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "create sysfs fail.\n");
+		return ret;
+	}
+
+	alarm_freq = (u32)FIXED_FREQ_CLK / (u32)MAX_FREQ_DIV;
+
+	ftm_clean_alarm();
+
+	device_init_wakeup(&pdev->dev, true);
+
+	return ret;
+}
+
+static const struct of_device_id ftm_alarm_match[] = {
+	{ .compatible = "fsl,ftm-alarm", },
+	{ .compatible = "fsl,ls1012a-ftm-alarm", },
+	{ .compatible = "fsl,ls1021a-ftm-alarm", },
+	{ .compatible = "fsl,ls1043a-ftm-alarm", },
+	{ .compatible = "fsl,ls1046a-ftm-alarm", },
+	{ .compatible = "fsl,ls1088a-ftm-alarm", },
+	{ .compatible = "fsl,ls208xa-ftm-alarm", },
+	{ .compatible = "fsl,ftm-timer", },
+	{ },
+};
+
+static struct platform_driver ftm_alarm_driver = {
+	.probe		= ftm_alarm_probe,
+	.driver		= {
+		.name	= "ftm-alarm",
+		.owner	= THIS_MODULE,
+		.of_match_table = ftm_alarm_match,
+	},
+};
+
+static int __init ftm_alarm_init(void)
+{
+	return platform_driver_register(&ftm_alarm_driver);
+}
+device_initcall(ftm_alarm_init);