ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 08:51:13 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
0295a29f1d
openwrt/package/firmware/layerscape/ls-rcw/Makefile

74 lines
2.4 KiB
Makefile
Raw Normal View History

layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
layerscape: rename firmware packages to avoid name collisions layerscape firmware package names collide with existing package contributions. Ex: layerscape mc and midnight-commander(mc) are in conflict. Firmware packages: mc, ppa, rcw and dpl are renamed to ls-mc, ls-ppa, ls-rcw and ls-dpl respectively. Signed-off-by: Ted Hess <thess@kitschensync.net>
2017-12-01 21:32:26 +00:00
PKG_NAME:=ls-rcw
ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to github The default location of ls-rcw has been changed from codeuaurora to github. The reason is that the old codeaurora source no longer resolves. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1046A-RDB Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE, Mention that previous codeaurora source is no longer available) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 09:17:01 +00:00
PKG_VERSION:=lf-6.1.1-1.0.0
PKG_RELEASE:=1
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
PKG_SOURCE_PROTO:=git
ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to github The default location of ls-rcw has been changed from codeuaurora to github. The reason is that the old codeaurora source no longer resolves. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1046A-RDB Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE, Mention that previous codeaurora source is no longer available) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 09:17:01 +00:00
PKG_SOURCE_URL:=https://github.com/nxp-qoriq/rcw
PKG_SOURCE_VERSION:=lf-6.1.1-1.0.0
PKG_MIRROR_HASH:=3127285549a0a7dd3cded20c2fbfb67b06943faa8dab529f61936dc1bea177db
packages: mark packages depending on a target as nonshared The packages can't be build as shared packages due to the unmet dependencies. Fixes FS#418. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-19 08:18:57 +00:00
treewide: Mark packages nonshared if they depend on @TARGET_ This marks all packages which depend on a target with @TARGET nonshared. If they are not marked nonshared they would be build by the SDK build and if this happens with a different SDK, then the SDK from the target the package depends on, the package would not be added to the index. This should fix the image builder for some of these packages. This should fix the image builder at least for bcm27xx/bcm2710 and bcm4908/generic. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-05-02 22:35:38 +00:00
PKG_FLAGS:=nonshared
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
include $(INCLUDE_DIR)/package.mk
layerscape: define only one package for ls-rcw We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-01 08:47:41 +00:00
define Package/layerscape-rcw
SECTION:=firmware
CATEGORY:=Firmware
TITLE:=NXP Layerscape RCW binaries
DEPENDS:=@TARGET_layerscape
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
layerscape: define only one package for ls-rcw We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-01 08:47:41 +00:00
BOARDS := \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
ls1012a-rdb \
ls1012a-frdm \
ls1012a-frwy-sdboot \
ls-rcw: Add ls1028ardb support Support RCW for NXP LS1028ARDB reference board. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
2022-07-19 11:34:17 +00:00
ls1028a-rdb \
ls1028a-rdb-sdboot \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
ls1043a-rdb \
ls1043a-rdb-sdboot \
layerscape: add FRWY-LS1046A board support The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-03 04:52:22 +00:00
ls1046a-frwy \
ls1046a-frwy-sdboot \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
ls1046a-rdb \
ls1046a-rdb-sdboot \
ls1088a-rdb \
ls1088a-rdb-sdboot \
ls2088a-rdb \
layerscape: add LX2160ARDB (Rev2.0 silicon) board support The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-30 05:12:43 +00:00
lx2160a-rdb \
lx2160a-rdb-sdboot \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
ls1021a-twr
RCW_ls1012a-rdb :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
RCW_ls1012a-frdm :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
RCW_ls1012a-frwy-sdboot :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
ls-rcw: Add ls1028ardb support Support RCW for NXP LS1028ARDB reference board. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
2022-07-19 11:34:17 +00:00
RCW_ls1028a-rdb :=ls1028ardb/R_SQPP_0x85bb/rcw_1300.bin
RCW_ls1028a-rdb-sdboot :=ls1028ardb/R_SQPP_0x85bb/rcw_1500_sdboot.bin
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
RCW_ls1043a-rdb :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
RCW_ls1043a-rdb-sdboot :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
layerscape: add FRWY-LS1046A board support The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-03 04:52:22 +00:00
RCW_ls1046a-frwy :=ls1046afrwy/NN_NNQNNPNP_3040_0506/rcw_1600_qspiboot.bin
RCW_ls1046a-frwy-sdboot :=ls1046afrwy/NN_NNQNNPNP_3040_0506/rcw_1600_sdboot.bin
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
RCW_ls1046a-rdb :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
RCW_ls1046a-rdb-sdboot :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
RCW_ls1088a-rdb :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
RCW_ls1088a-rdb-sdboot :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
RCW_ls2088a-rdb :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
layerscape: add LX2160ARDB (Rev2.0 silicon) board support The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-30 05:12:43 +00:00
RCW_lx2160a-rdb :=lx2160ardb_rev2/XGGFF_PP_HHHH_RR_19_5_2/rcw_2000_700_2900_19_5_2.bin
RCW_lx2160a-rdb-sdboot :=lx2160ardb_rev2/XGGFF_PP_HHHH_RR_19_5_2/rcw_2000_700_2900_19_5_2.bin
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
RCW_ls1021a-twr :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
layerscape: define only one package for ls-rcw We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-01 08:47:41 +00:00
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(foreach board,$(BOARDS), \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/fsl_$(board)-rcw.bin;)
layerscape: define only one package for ls-rcw We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-01 08:47:41 +00:00
endef
$(eval $(call BuildPackage,layerscape-rcw))
Reference in New Issue Copy Permalink