openwrt/target/linux/brcm2708/patches-4.19/950-0635-spi-devicetree-add-overlays-for-spi-3-to-6.patch

From 3873070310f64046c1e0ee27a2d9568a3eabb0d9 Mon Sep 17 00:00:00 2001
From: Martin Sperl <kernel@martin.sperl.org>
Date: Sun, 12 May 2019 16:17:08 +0000
Subject: [PATCH 635/773] spi: devicetree: add overlays for spi 3 to 6

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
 arch/arm/boot/dts/overlays/Makefile           |   8 ++
 arch/arm/boot/dts/overlays/README             | 104 ++++++++++++++++++
 .../boot/dts/overlays/spi3-1cs-overlay.dts    |  44 ++++++++
 .../boot/dts/overlays/spi3-2cs-overlay.dts    |  56 ++++++++++
 .../boot/dts/overlays/spi4-1cs-overlay.dts    |  44 ++++++++
 .../boot/dts/overlays/spi4-2cs-overlay.dts    |  56 ++++++++++
 .../boot/dts/overlays/spi5-1cs-overlay.dts    |  44 ++++++++
 .../boot/dts/overlays/spi5-2cs-overlay.dts    |  56 ++++++++++
 .../boot/dts/overlays/spi6-1cs-overlay.dts    |  44 ++++++++
 .../boot/dts/overlays/spi6-2cs-overlay.dts    |  56 ++++++++++
 10 files changed, 512 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -144,6 +144,14 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	spi2-1cs.dtbo \
 	spi2-2cs.dtbo \
 	spi2-3cs.dtbo \
+	spi3-1cs.dtbo \
+	spi3-2cs.dtbo \
+	spi4-1cs.dtbo \
+	spi4-2cs.dtbo \
+	spi5-1cs.dtbo \
+	spi5-2cs.dtbo \
+	spi6-1cs.dtbo \
+	spi6-2cs.dtbo \
 	ssd1306.dtbo \
 	superaudioboard.dtbo \
 	sx150x.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -2085,6 +2085,110 @@ Params: cs0_pin                 GPIO pin
                                 is 'okay' or enabled).
 
 
+Name:   spi3-1cs
+Info:   Enables spi3 with a single chip select (CS) line and associated spidev
+        dev node. The gpio pin number for the CS line and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi3-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 0 - BCM SPI3_CE0).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev3.0 (default
+                                is 'on' or enabled).
+
+
+Name:   spi3-2cs
+Info:   Enables spi3 with two chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi3-2cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 0 - BCM SPI3_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 24 - BCM SPI3_CE1).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev3.0 (default
+                                is 'on' or enabled).
+        cs1_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev3.1 (default
+                                is 'on' or enabled).
+
+
+Name:   spi4-1cs
+Info:   Enables spi4 with a single chip select (CS) line and associated spidev
+        dev node. The gpio pin number for the CS line and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi4-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 4 - BCM SPI4_CE0).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev4.0 (default
+                                is 'on' or enabled).
+
+
+Name:   spi4-2cs
+Info:   Enables spi4 with two chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi4-2cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 4 - BCM SPI4_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 25 - BCM SPI4_CE1).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev4.0 (default
+                                is 'on' or enabled).
+        cs1_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev4.1 (default
+                                is 'on' or enabled).
+
+
+Name:   spi5-1cs
+Info:   Enables spi5 with a single chip select (CS) line and associated spidev
+        dev node. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi5-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 12 - BCM SPI5_CE0).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev5.0 (default
+                                is 'on' or enabled).
+
+
+Name:   spi5-2cs
+Info:   Enables spi5 with two chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi5-2cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 12 - BCM SPI5_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 26 - BCM SPI5_CE1).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev5.0 (default
+                                is 'on' or enabled).
+        cs1_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev5.1 (default
+                                is 'on' or enabled).
+
+
+Name:   spi6-1cs
+Info:   Enables spi6 with a single chip select (CS) line and associated spidev
+        dev node. The gpio pin number for the CS line and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi6-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI6_CE0).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev6.0 (default
+                                is 'on' or enabled).
+
+
+Name:   spi6-2cs
+Info:   Enables spi6 with two chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+Load:   dtoverlay=spi6-2cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI6_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 27 - BCM SPI6_CE1).
+        cs0_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev6.0 (default
+                                is 'on' or enabled).
+        cs1_spidev              Set to 'off' to prevent the creation of a
+                                userspace device node /dev/spidev6.1 (default
+                                is 'on' or enabled).
+
+
 Name:   ssd1306
 Info:   Overlay for activation of SSD1306 over I2C OLED display framebuffer.
 Load:   dtoverlay=ssd1306,<param>=<val>
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi3_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <0>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi3>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi3_pins &spi3_cs_pins>;
+			cs-gpios = <&gpio 0 1>;
+			status = "okay";
+
+			spidev3_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs0_spidev = <&spidev3_0>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts
@@ -0,0 +1,56 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi3_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <0 24>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi3>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi3_pins &spi3_cs_pins>;
+			cs-gpios = <&gpio 0 1>, <&gpio 24 1>;
+			status = "okay";
+
+			spidev3_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+
+			spidev3_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs0_spidev = <&spidev3_0>,"status";
+		cs1_spidev = <&spidev3_1>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi4_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <4>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi4>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi4_pins &spi4_cs_pins>;
+			cs-gpios = <&gpio 4 1>;
+			status = "okay";
+
+			spidev4_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs0_spidev = <&spidev4_0>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts
@@ -0,0 +1,56 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi4_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <4 25>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi4>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi4_pins &spi4_cs_pins>;
+			cs-gpios = <&gpio 4 1>, <&gpio 25 1>;
+			status = "okay";
+
+			spidev4_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+
+			spidev4_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs0_spidev = <&spidev4_0>,"status";
+		cs1_spidev = <&spidev4_1>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi5_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <12>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi5>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi5_pins &spi5_cs_pins>;
+			cs-gpios = <&gpio 12 1>;
+			status = "okay";
+
+			spidev5_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs0_spidev = <&spidev5_0>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts
@@ -0,0 +1,56 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi5_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <12 26>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi5>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi5_pins &spi5_cs_pins>;
+			cs-gpios = <&gpio 12 1>, <&gpio 26 1>;
+			status = "okay";
+
+			spidev5_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+
+			spidev5_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs0_spidev = <&spidev5_0>,"status";
+		cs1_spidev = <&spidev5_1>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi6_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <18>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi6>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi6_pins &spi6_cs_pins>;
+			cs-gpios = <&gpio 18 1>;
+			status = "okay";
+
+			spidev6_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs0_spidev = <&spidev6_0>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts
@@ -0,0 +1,56 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	fragment@0 {
+		target = <&spi6_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <18 27>;
+			brcm,function = <1>; /* output */
+		};
+	};
+
+	fragment@1 {
+		target = <&spi6>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+		        pinctrl-0 = <&spi6_pins &spi6_cs_pins>;
+			cs-gpios = <&gpio 18 1>, <&gpio 27 1>;
+			status = "okay";
+
+			spidev6_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+
+			spidev6_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <125000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs0_spidev = <&spidev6_0>,"status";
+		cs1_spidev = <&spidev6_1>,"status";
+	};
+};