ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 01:11:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
0162174e7e
openwrt/target/linux/imx/image/cortexa53.mk

61 lines
1.8 KiB
Makefile
Raw Normal View History

imx: add Gateworks Venice support Add support for Gateworks Venice imx8m family of boards: - required kernel modules for on-board devices - image generation - initial network config - sysupgrade support The resulting compressed disk image (bin/targets/imx/cortexa53/openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz) can be installed on a Gateworks venice board via U-Boot: u-boot=> tftpboot $loadaddr openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz && \ gzwrite mmc $dev $loadaddr $filesize WARNING: this will overwrite any boot firmware on the eMMC user hardware partition which if being used will brick your board requiring JTAG to re-program boot firmware and recover The compressed disk image contains the partition table and filesystems only and that it is expected that boot firmware is installed properly on the eMMC boot0 hardware partition. The easiest way to ensure this is to use the Gateworks JTAG adapter/process to install the latest boot firmware as follows from a Linux host: wget http://dev.gateworks.com/jtag/jtag_usbv4 chmod +x jtag_usbv4 wget http://dev.gateworks.com/venice/images/firmware-venice-imx8mm.bin sudo ./jtag_usbv4 -p firmware-venice-imx8mm.bin Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2024-01-12 19:34:28 +00:00
define Build/boot-scr
rm -f $@-boot.scr
mkimage -A arm64 -O linux -T script -C none -a 0 -e 0 \
-d bootscript-$(BOOT_SCRIPT) $@-boot.scr
endef
define Build/boot-img-ext4
rm -fR $@.boot
mkdir -p $@.boot
$(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
$(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
-$(CP) $@-boot.scr $@.boot/boot.scr
make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
$@.bootimg $@.boot
endef
define Build/sdcard-img-ext4
SIGNATURE="$(IMG_PART_SIGNATURE)" \
PARTOFFSET="$(PARTITION_OFFSET)" PADDING=1 \
$(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
$@ \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
256
endef
imx: add imx8m support Add imx8m support: - add a cortexa53 subtarget to imx - move ARCH and KERNELNAME to subtargets - account for kernel modules that are not used for cortexa53 No device-specific targets or firmware images are created yet but all imx8m* dtbs will be built. enabling CONFIG_TARGET_ROOTFS_INITRAMFS results in openwrt-imx-cortexa53-imx8m-initramfs-kernel.bin which has been successfully booted on an imx8mm-evk using the following: u-boot=> tftpboot $fdt_addr_r image-imx8mm-evk.dtb && \ tftpboot $kernel_addr_r openwrt-imx-cortexa53-imx8m-initramfs-kernel.bin && \ booti $kernel_addr_r - $fdt_addr_r Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2024-01-08 22:04:15 +00:00
define Device/Default
PROFILES := Default
FILESYSTEMS := squashfs ubifs ext4
DEVICE_DTS_DIR := $(DTS_DIR)/freescale
KERNEL_INSTALL := 1
KERNEL_NAME := Image
KERNEL := kernel-bin
endef
define Device/imx8m
DEVICE_VENDOR := NXP
DEVICE_MODEL := i.MX8M
DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*.dts)))
endef
TARGET_DEVICES += imx8m
imx: add Gateworks Venice support Add support for Gateworks Venice imx8m family of boards: - required kernel modules for on-board devices - image generation - initial network config - sysupgrade support The resulting compressed disk image (bin/targets/imx/cortexa53/openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz) can be installed on a Gateworks venice board via U-Boot: u-boot=> tftpboot $loadaddr openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz && \ gzwrite mmc $dev $loadaddr $filesize WARNING: this will overwrite any boot firmware on the eMMC user hardware partition which if being used will brick your board requiring JTAG to re-program boot firmware and recover The compressed disk image contains the partition table and filesystems only and that it is expected that boot firmware is installed properly on the eMMC boot0 hardware partition. The easiest way to ensure this is to use the Gateworks JTAG adapter/process to install the latest boot firmware as follows from a Linux host: wget http://dev.gateworks.com/jtag/jtag_usbv4 chmod +x jtag_usbv4 wget http://dev.gateworks.com/venice/images/firmware-venice-imx8mm.bin sudo ./jtag_usbv4 -p firmware-venice-imx8mm.bin Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2024-01-12 19:34:28 +00:00
define Device/gateworks_venice
$(call Device/Default)
FILESYSTEMS := squashfs ext4
DEVICE_VENDOR := Gateworks
DEVICE_MODEL := i.MX8M Venice
BOOT_SCRIPT := gateworks_venice
PARTITION_OFFSET := 16M
DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*-venice*.dts)))
DEVICE_PACKAGES := \
kmod-hwmon-gsc kmod-rtc-ds1672 kmod-eeprom-at24 \
kmod-gpio-button-hotplug kmod-leds-gpio kmod-pps-gpio \
kmod-lan743x kmod-sky2 kmod-iio-st_accel-i2c \
kmod-can kmod-can-flexcan kmod-can-mcp251x
IMAGES := img.gz
IMAGE/img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
endef
TARGET_DEVICES += gateworks_venice
Reference in New Issue Copy Permalink