mirror of
https://github.com/open-sdr/openwifi.git
synced 2024-12-24 07:46:54 +00:00
8b7c849019
1. Consider more corner cases: interrupt missing will cause a bd in the driver ring will never be cleaned. this need to be considered in the openwifi_tx() 2. Another corner case in openwifi_tx_interrupt: a packet is just sent and an interrupt calls the routine, but it finds that the bd in the driver ring has been cleared somehow 3. The driver ring and FPGA queue are always 1 on 1 mapping. User needs to map the higher level Linux priority to the driver ring idx instead of FPGA queue idx 4. Record the information about which FPGA queue (driver ring) has stopped which Linux priority before, and do exhausted search after a packet is sent (in the interrupt routine) to wake that Linux priority queue (in mac80211) up 5. Reserve more room before the FPGA queue full to adopt the last packet before we decide to stop the mac80211 queue. In this way, the last packet before the queue stop will still be put into FPGA and is expected to be sent (not lost/drop actively)
2416 lines
98 KiB
C
2416 lines
98 KiB
C
// Author: Xianjun Jiao, Michael Mehari, Wei Liu, Jetmir Haxhibeqiri, Pablo Avila Campos
|
|
// SPDX-FileCopyrightText: 2022 UGent
|
|
// SPDX-License-Identifier: AGPL-3.0-or-later
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io-64-nonatomic-lo-hi.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/random.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/sched/task.h>
|
|
#include <linux/dma/xilinx_dma.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/clk-provider.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/leds.h>
|
|
|
|
#define IIO_AD9361_USE_PRIVATE_H_
|
|
#include <../../drivers/iio/adc/ad9361_regs.h>
|
|
#include <../../drivers/iio/adc/ad9361.h>
|
|
#include <../../drivers/iio/adc/ad9361_private.h>
|
|
|
|
#include <../../drivers/iio/frequency/cf_axi_dds.h>
|
|
extern int ad9361_get_tx_atten(struct ad9361_rf_phy *phy, u32 tx_num);
|
|
extern int ad9361_set_tx_atten(struct ad9361_rf_phy *phy, u32 atten_mdb,
|
|
bool tx1, bool tx2, bool immed);
|
|
extern int ad9361_ctrl_outs_setup(struct ad9361_rf_phy *phy,
|
|
struct ctrl_outs_control *ctrl);
|
|
extern int ad9361_do_calib_run(struct ad9361_rf_phy *phy, u32 cal, int arg);
|
|
|
|
#include "../user_space/sdrctl_src/nl80211_testmode_def.h"
|
|
#include "hw_def.h"
|
|
#include "sdr.h"
|
|
#include "git_rev.h"
|
|
|
|
// driver API of component driver
|
|
extern struct tx_intf_driver_api *tx_intf_api;
|
|
extern struct rx_intf_driver_api *rx_intf_api;
|
|
extern struct openofdm_tx_driver_api *openofdm_tx_api;
|
|
extern struct openofdm_rx_driver_api *openofdm_rx_api;
|
|
extern struct xpu_driver_api *xpu_api;
|
|
|
|
u32 gen_mpdu_crc(u8 *data_in, u32 num_bytes);
|
|
u8 gen_mpdu_delim_crc(u16 m);
|
|
u32 reverse32(u32 d);
|
|
static int openwifi_set_antenna(struct ieee80211_hw *dev, u32 tx_ant, u32 rx_ant);
|
|
static int openwifi_get_antenna(struct ieee80211_hw *dev, u32 *tx_ant, u32 *rx_ant);
|
|
int rssi_half_db_to_rssi_dbm(int rssi_half_db, int rssi_correction);
|
|
int rssi_dbm_to_rssi_half_db(int rssi_dbm, int rssi_correction);
|
|
int rssi_correction_lookup_table(u32 freq_MHz);
|
|
|
|
#include "sdrctl_intf.c"
|
|
#include "sysfs_intf.c"
|
|
|
|
static int test_mode = 0; // bit0: aggregation enable(1)/disable(0); NO USE ANY MORE: bit1: tx offset tuning enable(0)/disable(1)
|
|
// Internal indication variables after parsing test_mode
|
|
static bool AGGR_ENABLE = false;
|
|
static bool TX_OFFSET_TUNING_ENABLE = false;
|
|
|
|
static int init_tx_att = 0;
|
|
|
|
MODULE_AUTHOR("Xianjun Jiao");
|
|
MODULE_DESCRIPTION("SDR driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
module_param(test_mode, int, 0);
|
|
MODULE_PARM_DESC(myint, "test_mode. bit0: aggregation enable(1)/disable(0)");
|
|
|
|
module_param(init_tx_att, int, 0);
|
|
MODULE_PARM_DESC(myint, "init_tx_att. TX attenuation in dB*1000 example: set to 3000 for 3dB attenuation");
|
|
|
|
// ---------------rfkill---------------------------------------
|
|
static bool openwifi_is_radio_enabled(struct openwifi_priv *priv)
|
|
{
|
|
int reg;
|
|
|
|
if (priv->tx_intf_cfg==TX_INTF_BW_20MHZ_AT_0MHZ_ANT0 || priv->tx_intf_cfg==TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT0 || priv->tx_intf_cfg==TX_INTF_BW_20MHZ_AT_0MHZ_ANT_BOTH)
|
|
reg = ad9361_get_tx_atten(priv->ad9361_phy, 1);
|
|
else
|
|
reg = ad9361_get_tx_atten(priv->ad9361_phy, 2);
|
|
|
|
if (reg == (AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT]))
|
|
return true;// 0 off, 1 on
|
|
return false;
|
|
}
|
|
|
|
void openwifi_rfkill_init(struct ieee80211_hw *hw)
|
|
{
|
|
struct openwifi_priv *priv = hw->priv;
|
|
|
|
priv->rfkill_off = openwifi_is_radio_enabled(priv);
|
|
printk("%s openwifi_rfkill_init: wireless switch is %s\n", sdr_compatible_str, priv->rfkill_off ? "on" : "off");
|
|
wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off);
|
|
wiphy_rfkill_start_polling(hw->wiphy);
|
|
}
|
|
|
|
void openwifi_rfkill_poll(struct ieee80211_hw *hw)
|
|
{
|
|
bool enabled;
|
|
struct openwifi_priv *priv = hw->priv;
|
|
|
|
enabled = openwifi_is_radio_enabled(priv);
|
|
// printk("%s openwifi_rfkill_poll: wireless radio switch turned %s\n", sdr_compatible_str, enabled ? "on" : "off");
|
|
if (unlikely(enabled != priv->rfkill_off)) {
|
|
priv->rfkill_off = enabled;
|
|
printk("%s openwifi_rfkill_poll: WARNING wireless radio switch turned %s\n", sdr_compatible_str, enabled ? "on" : "off");
|
|
wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
|
|
}
|
|
}
|
|
|
|
void openwifi_rfkill_exit(struct ieee80211_hw *hw)
|
|
{
|
|
printk("%s openwifi_rfkill_exit\n", sdr_compatible_str);
|
|
wiphy_rfkill_stop_polling(hw->wiphy);
|
|
}
|
|
//----------------rfkill end-----------------------------------
|
|
|
|
inline int rssi_dbm_to_rssi_half_db(int rssi_dbm, int rssi_correction)
|
|
{
|
|
return ((rssi_correction+rssi_dbm)<<1);
|
|
}
|
|
|
|
inline int rssi_correction_lookup_table(u32 freq_MHz)
|
|
{
|
|
int rssi_correction;
|
|
|
|
if (freq_MHz<2412) {
|
|
rssi_correction = 153;
|
|
} else if (freq_MHz<=2484) {
|
|
rssi_correction = 153;
|
|
} else if (freq_MHz<5160) {
|
|
rssi_correction = 153;
|
|
} else if (freq_MHz<=5240) {
|
|
rssi_correction = 145;
|
|
} else if (freq_MHz<=5320) {
|
|
rssi_correction = 148;
|
|
} else {
|
|
rssi_correction = 148;
|
|
}
|
|
|
|
return rssi_correction;
|
|
}
|
|
|
|
static void ad9361_rf_set_channel(struct ieee80211_hw *dev,
|
|
struct ieee80211_conf *conf)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
u32 actual_rx_lo = conf->chandef.chan->center_freq - priv->rx_freq_offset_to_lo_MHz;
|
|
u32 actual_tx_lo;
|
|
u32 spi_disable;
|
|
u32 diff_tx_lo;
|
|
bool change_flag = (actual_rx_lo != priv->actual_rx_lo);
|
|
int static_lbt_th, auto_lbt_th, fpga_lbt_th, receiver_rssi_dbm_th;
|
|
struct timeval tv;
|
|
unsigned long time_before = 0;
|
|
unsigned long time_after = 0;
|
|
|
|
if (change_flag) {
|
|
actual_tx_lo = conf->chandef.chan->center_freq - priv->tx_freq_offset_to_lo_MHz;
|
|
diff_tx_lo = priv->last_tx_quad_cal_lo > actual_tx_lo ? priv->last_tx_quad_cal_lo - actual_tx_lo : actual_tx_lo - priv->last_tx_quad_cal_lo;
|
|
|
|
// -------------------Tx Lo tuning-------------------
|
|
clk_set_rate(priv->ad9361_phy->clks[TX_RFPLL], ( ( ((u64)1000000ull)*((u64)actual_tx_lo ) + priv->rf_reg_val[RF_TX_REG_IDX_FO] )>>1) );
|
|
priv->actual_tx_lo = actual_tx_lo;
|
|
|
|
// -------------------Rx Lo tuning-------------------
|
|
clk_set_rate(priv->ad9361_phy->clks[RX_RFPLL], ( ( ((u64)1000000ull)*((u64)actual_rx_lo ) + priv->rf_reg_val[RF_RX_REG_IDX_FO] )>>1) );
|
|
priv->actual_rx_lo = actual_rx_lo;
|
|
|
|
// call Tx Quadrature calibration if frequency change is more than 100MHz
|
|
if (diff_tx_lo > 100) {
|
|
priv->last_tx_quad_cal_lo = actual_tx_lo;
|
|
do_gettimeofday(&tv);
|
|
time_before = tv.tv_usec + ((u64)1000000ull)*((u64)tv.tv_sec );
|
|
spi_disable = xpu_api->XPU_REG_SPI_DISABLE_read(); // disable FPGA SPI module
|
|
xpu_api->XPU_REG_SPI_DISABLE_write(1);
|
|
ad9361_do_calib_run(priv->ad9361_phy, TX_QUAD_CAL, (int)priv->ad9361_phy->state->last_tx_quad_cal_phase);
|
|
// restore original SPI disable state
|
|
xpu_api->XPU_REG_SPI_DISABLE_write(spi_disable);
|
|
do_gettimeofday(&tv);
|
|
time_after = tv.tv_usec + ((u64)1000000ull)*((u64)tv.tv_sec );
|
|
}
|
|
|
|
// get rssi correction value from lookup table
|
|
priv->rssi_correction = rssi_correction_lookup_table(actual_rx_lo);
|
|
|
|
// set appropriate lbt threshold
|
|
// xpu_api->XPU_REG_LBT_TH_write((priv->rssi_correction-62)<<1); // -62dBm
|
|
// xpu_api->XPU_REG_LBT_TH_write((priv->rssi_correction-62-16)<<1); // wei's magic value is 135, here is 134 @ ch 44
|
|
// auto_lbt_th = ((priv->rssi_correction-62-16)<<1);
|
|
auto_lbt_th = rssi_dbm_to_rssi_half_db(-78, priv->rssi_correction); // -78dBm, the same as above ((priv->rssi_correction-62-16)<<1)
|
|
static_lbt_th = rssi_dbm_to_rssi_half_db(-(priv->drv_xpu_reg_val[DRV_XPU_REG_IDX_LBT_TH]), priv->rssi_correction);
|
|
fpga_lbt_th = (priv->drv_xpu_reg_val[DRV_XPU_REG_IDX_LBT_TH]==0?auto_lbt_th:static_lbt_th);
|
|
xpu_api->XPU_REG_LBT_TH_write(fpga_lbt_th);
|
|
priv->last_auto_fpga_lbt_th = auto_lbt_th;
|
|
|
|
// Set rssi_half_db threshold (-85dBm equivalent) to receiver. Receiver will not react to signal lower than this rssi. See test records (OPENOFDM_RX_POWER_THRES_INIT in hw_def.h)
|
|
receiver_rssi_dbm_th = (priv->drv_rx_reg_val[DRV_RX_REG_IDX_DEMOD_TH]==0?OPENOFDM_RX_RSSI_DBM_TH_DEFAULT:(-priv->drv_rx_reg_val[DRV_RX_REG_IDX_DEMOD_TH]));
|
|
openofdm_rx_api->OPENOFDM_RX_REG_POWER_THRES_write((OPENOFDM_RX_DC_RUNNING_SUM_TH_INIT<<16)|rssi_dbm_to_rssi_half_db(receiver_rssi_dbm_th, priv->rssi_correction));
|
|
|
|
if (actual_rx_lo < 2500) {
|
|
if (priv->band != BAND_2_4GHZ) {
|
|
priv->band = BAND_2_4GHZ;
|
|
xpu_api->XPU_REG_BAND_CHANNEL_write( (priv->use_short_slot<<24)|(priv->band<<16) );
|
|
}
|
|
} else {
|
|
if (priv->band != BAND_5_8GHZ) {
|
|
priv->band = BAND_5_8GHZ;
|
|
xpu_api->XPU_REG_BAND_CHANNEL_write( (priv->use_short_slot<<24)|(priv->band<<16) );
|
|
}
|
|
}
|
|
printk("%s ad9361_rf_set_channel %dM rssi_correction %d (change flag %d) fpga_lbt_th %d(%ddBm) (auto %d static %d) tx_quad_cal duration %lu us\n", sdr_compatible_str,conf->chandef.chan->center_freq,priv->rssi_correction,change_flag,fpga_lbt_th,rssi_half_db_to_rssi_dbm(fpga_lbt_th, priv->rssi_correction),auto_lbt_th,static_lbt_th, time_after-time_before);
|
|
}
|
|
}
|
|
|
|
const struct openwifi_rf_ops ad9361_rf_ops = {
|
|
.name = "ad9361",
|
|
// .init = ad9361_rf_init,
|
|
// .stop = ad9361_rf_stop,
|
|
.set_chan = ad9361_rf_set_channel,
|
|
// .calc_rssi = ad9361_rf_calc_rssi,
|
|
};
|
|
|
|
u16 reverse16(u16 d) {
|
|
union u16_byte2 tmp0, tmp1;
|
|
tmp0.a = d;
|
|
tmp1.c[0] = tmp0.c[1];
|
|
tmp1.c[1] = tmp0.c[0];
|
|
return(tmp1.a);
|
|
}
|
|
|
|
u32 reverse32(u32 d) {
|
|
union u32_byte4 tmp0, tmp1;
|
|
tmp0.a = d;
|
|
tmp1.c[0] = tmp0.c[3];
|
|
tmp1.c[1] = tmp0.c[2];
|
|
tmp1.c[2] = tmp0.c[1];
|
|
tmp1.c[3] = tmp0.c[0];
|
|
return(tmp1.a);
|
|
}
|
|
|
|
static int openwifi_init_tx_ring(struct openwifi_priv *priv, int ring_idx)
|
|
{
|
|
struct openwifi_ring *ring = &(priv->tx_ring[ring_idx]);
|
|
int i;
|
|
|
|
ring->stop_flag = -1;
|
|
ring->bd_wr_idx = 0;
|
|
ring->bd_rd_idx = 0;
|
|
ring->bds = kmalloc(sizeof(struct openwifi_buffer_descriptor)*NUM_TX_BD,GFP_KERNEL);
|
|
if (ring->bds==NULL) {
|
|
printk("%s openwifi_init_tx_ring: WARNING Cannot allocate TX ring\n",sdr_compatible_str);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < NUM_TX_BD; i++) {
|
|
ring->bds[i].skb_linked=NULL; // for tx, skb is from upper layer
|
|
//at first right after skb allocated, head, data, tail are the same.
|
|
ring->bds[i].dma_mapping_addr = 0; // for tx, mapping is done after skb is received from upper layer in tx routine
|
|
ring->bds[i].seq_no = 0xffff; // invalid value
|
|
ring->bds[i].prio = 0xff; // invalid value
|
|
ring->bds[i].len_mpdu = 0; // invalid value
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void openwifi_free_tx_ring(struct openwifi_priv *priv, int ring_idx)
|
|
{
|
|
struct openwifi_ring *ring = &(priv->tx_ring[ring_idx]);
|
|
int i;
|
|
|
|
ring->stop_flag = -1;
|
|
ring->bd_wr_idx = 0;
|
|
ring->bd_rd_idx = 0;
|
|
for (i = 0; i < NUM_TX_BD; i++) {
|
|
if (ring->bds[i].skb_linked == 0 && ring->bds[i].dma_mapping_addr == 0)
|
|
continue;
|
|
if (ring->bds[i].dma_mapping_addr != 0)
|
|
dma_unmap_single(priv->tx_chan->device->dev, ring->bds[i].dma_mapping_addr,ring->bds[i].skb_linked->len, DMA_MEM_TO_DEV);
|
|
// if (ring->bds[i].skb_linked!=NULL)
|
|
// dev_kfree_skb(ring->bds[i].skb_linked); // only use dev_kfree_skb when there is exception
|
|
if ( (ring->bds[i].dma_mapping_addr != 0 && ring->bds[i].skb_linked == 0) ||
|
|
(ring->bds[i].dma_mapping_addr == 0 && ring->bds[i].skb_linked != 0))
|
|
printk("%s openwifi_free_tx_ring: WARNING ring %d i %d skb_linked %p dma_mapping_addr %08x\n", sdr_compatible_str,
|
|
ring_idx, i, (void*)(ring->bds[i].skb_linked), (unsigned int)(ring->bds[i].dma_mapping_addr));
|
|
|
|
ring->bds[i].skb_linked=NULL;
|
|
ring->bds[i].dma_mapping_addr = 0;
|
|
ring->bds[i].seq_no = 0xffff; // invalid value
|
|
ring->bds[i].prio = 0xff; // invalid value
|
|
ring->bds[i].len_mpdu = 0; // invalid value
|
|
}
|
|
if (ring->bds)
|
|
kfree(ring->bds);
|
|
ring->bds = NULL;
|
|
}
|
|
|
|
static int openwifi_init_rx_ring(struct openwifi_priv *priv)
|
|
{
|
|
int i;
|
|
u8 *pdata_tmp;
|
|
|
|
priv->rx_cyclic_buf = dma_alloc_coherent(priv->rx_chan->device->dev,RX_BD_BUF_SIZE*NUM_RX_BD,&priv->rx_cyclic_buf_dma_mapping_addr,GFP_KERNEL);
|
|
if (!priv->rx_cyclic_buf) {
|
|
printk("%s openwifi_init_rx_ring: WARNING dma_alloc_coherent failed!\n", sdr_compatible_str);
|
|
dma_free_coherent(priv->rx_chan->device->dev,RX_BD_BUF_SIZE*NUM_RX_BD,priv->rx_cyclic_buf,priv->rx_cyclic_buf_dma_mapping_addr);
|
|
return(-1);
|
|
}
|
|
|
|
// Set tsft_low and tsft_high to 0. If they are not zero, it means there is a packet in the buffer by DMA
|
|
for (i=0; i<NUM_RX_BD; i++) {
|
|
pdata_tmp = priv->rx_cyclic_buf + i*RX_BD_BUF_SIZE; // our header insertion is at the beginning
|
|
(*((u16*)(pdata_tmp+10))) = 0;
|
|
}
|
|
printk("%s openwifi_init_rx_ring: NUM_RX_BD %d RX_BD_BUF_SIZE %d pkt existing flag are cleared!\n", sdr_compatible_str,
|
|
NUM_RX_BD, RX_BD_BUF_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void openwifi_free_rx_ring(struct openwifi_priv *priv)
|
|
{
|
|
if (priv->rx_cyclic_buf)
|
|
dma_free_coherent(priv->rx_chan->device->dev,RX_BD_BUF_SIZE*NUM_RX_BD,priv->rx_cyclic_buf,priv->rx_cyclic_buf_dma_mapping_addr);
|
|
|
|
priv->rx_cyclic_buf_dma_mapping_addr = 0;
|
|
priv->rx_cyclic_buf = 0;
|
|
}
|
|
|
|
static int rx_dma_setup(struct ieee80211_hw *dev){
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct dma_device *rx_dev = priv->rx_chan->device;
|
|
|
|
priv->rxd = rx_dev->device_prep_dma_cyclic(priv->rx_chan,priv->rx_cyclic_buf_dma_mapping_addr,RX_BD_BUF_SIZE*NUM_RX_BD,RX_BD_BUF_SIZE,DMA_DEV_TO_MEM,DMA_CTRL_ACK|DMA_PREP_INTERRUPT);
|
|
if (!(priv->rxd)) {
|
|
openwifi_free_rx_ring(priv);
|
|
printk("%s rx_dma_setup: WARNING rx_dev->device_prep_dma_cyclic %p\n", sdr_compatible_str, (void*)(priv->rxd));
|
|
return(-1);
|
|
}
|
|
priv->rxd->callback = 0;
|
|
priv->rxd->callback_param = 0;
|
|
|
|
priv->rx_cookie = priv->rxd->tx_submit(priv->rxd);
|
|
|
|
if (dma_submit_error(priv->rx_cookie)) {
|
|
printk("%s rx_dma_setup: WARNING dma_submit_error(rx_cookie) %d\n", sdr_compatible_str, (u32)(priv->rx_cookie));
|
|
return(-1);
|
|
}
|
|
|
|
dma_async_issue_pending(priv->rx_chan);
|
|
return(0);
|
|
}
|
|
|
|
inline int rssi_half_db_to_rssi_dbm(int rssi_half_db, int rssi_correction)
|
|
{
|
|
int rssi_db, rssi_dbm;
|
|
|
|
rssi_db = (rssi_half_db>>1);
|
|
|
|
rssi_dbm = rssi_db - rssi_correction;
|
|
|
|
rssi_dbm = (rssi_dbm < (-128)? (-128) : rssi_dbm);
|
|
|
|
return rssi_dbm;
|
|
}
|
|
|
|
static irqreturn_t openwifi_rx_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct ieee80211_hw *dev = dev_id;
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct ieee80211_rx_status rx_status = {0};
|
|
struct sk_buff *skb;
|
|
struct ieee80211_hdr *hdr;
|
|
u32 addr1_low32, addr2_low32=0, addr3_low32=0, len, rate_idx, tsft_low, tsft_high, loop_count=0;//, fc_di;
|
|
bool ht_flag, short_gi, ht_aggr, ht_aggr_last;
|
|
// u32 dma_driver_buf_idx_mod;
|
|
u8 *pdata_tmp;
|
|
u8 fcs_ok;//, target_buf_idx;//, phy_rx_sn_hw;
|
|
s8 signal;
|
|
u16 agc_status_and_pkt_exist_flag, rssi_half_db, addr1_high16, addr2_high16=0, addr3_high16=0, seq_no=0;
|
|
bool content_ok, len_overflow, is_unicast;
|
|
|
|
#ifdef USE_NEW_RX_INTERRUPT
|
|
int i;
|
|
spin_lock(&priv->lock);
|
|
for (i=0; i<NUM_RX_BD; i++) {
|
|
pdata_tmp = priv->rx_cyclic_buf + i*RX_BD_BUF_SIZE;
|
|
agc_status_and_pkt_exist_flag = (*((u16*)(pdata_tmp+10))); //check rx_intf_pl_to_m_axis.v. FPGA TODO: add pkt exist 1bit flag next to gpio_status_lock_by_sig_valid
|
|
if ( agc_status_and_pkt_exist_flag==0 ) // no packet in the buffer
|
|
continue;
|
|
#else
|
|
static u8 target_buf_idx_old = 0;
|
|
spin_lock(&priv->lock);
|
|
while(1) { // loop all rx buffers that have new rx packets
|
|
pdata_tmp = priv->rx_cyclic_buf + target_buf_idx_old*RX_BD_BUF_SIZE; // our header insertion is at the beginning
|
|
agc_status_and_pkt_exist_flag = (*((u16*)(pdata_tmp+10)));
|
|
if ( agc_status_and_pkt_exist_flag==0 ) // no packet in the buffer
|
|
break;
|
|
#endif
|
|
|
|
tsft_low = (*((u32*)(pdata_tmp+0 )));
|
|
tsft_high = (*((u32*)(pdata_tmp+4 )));
|
|
rssi_half_db = (*((u16*)(pdata_tmp+8 )));
|
|
len = (*((u16*)(pdata_tmp+12)));
|
|
|
|
len_overflow = (len>(RX_BD_BUF_SIZE-16)?true:false);
|
|
|
|
rate_idx = (*((u16*)(pdata_tmp+14)));
|
|
ht_flag = ((rate_idx&0x10)!=0);
|
|
short_gi = ((rate_idx&0x20)!=0);
|
|
ht_aggr = (ht_flag & ((rate_idx&0x40)!=0));
|
|
ht_aggr_last = (ht_flag & ((rate_idx&0x80)!=0));
|
|
rate_idx = (rate_idx&0x1F);
|
|
|
|
fcs_ok = ( len_overflow?0:(*(( u8*)(pdata_tmp+16+len-1))) );
|
|
|
|
//phy_rx_sn_hw = (fcs_ok&(NUM_RX_BD-1));
|
|
// phy_rx_sn_hw = (fcs_ok&0x7f);//0x7f is FPGA limitation
|
|
// dma_driver_buf_idx_mod = (state.residue&0x7f);
|
|
fcs_ok = ((fcs_ok&0x80)!=0);
|
|
|
|
if ( (len>=14 && (!len_overflow)) && (rate_idx>=8 && rate_idx<=23)) {
|
|
// if ( phy_rx_sn_hw!=dma_driver_buf_idx_mod) {
|
|
// printk("%s openwifi_rx: WARNING sn %d next buf_idx %d!\n", sdr_compatible_str,phy_rx_sn_hw,dma_driver_buf_idx_mod);
|
|
// }
|
|
content_ok = true;
|
|
} else {
|
|
printk("%s openwifi_rx: WARNING content! len%d overflow%d rate_idx%d\n", sdr_compatible_str,
|
|
len, len_overflow, rate_idx);
|
|
content_ok = false;
|
|
}
|
|
|
|
signal = rssi_half_db_to_rssi_dbm(rssi_half_db, priv->rssi_correction);
|
|
|
|
hdr = (struct ieee80211_hdr *)(pdata_tmp+16);
|
|
if (len>=20) {
|
|
addr2_low32 = *((u32*)(hdr->addr2+2));
|
|
addr2_high16 = *((u16*)(hdr->addr2));
|
|
}
|
|
|
|
addr1_low32 = *((u32*)(hdr->addr1+2));
|
|
addr1_high16 = *((u16*)(hdr->addr1));
|
|
|
|
if ( priv->drv_rx_reg_val[DRV_RX_REG_IDX_PRINT_CFG]&DMESG_LOG_ANY ) {
|
|
if (len>=26) {
|
|
addr3_low32 = *((u32*)(hdr->addr3+2));
|
|
addr3_high16 = *((u16*)(hdr->addr3));
|
|
}
|
|
if (len>=28)
|
|
seq_no = ( (hdr->seq_ctrl&IEEE80211_SCTL_SEQ)>>4 );
|
|
|
|
is_unicast = (addr1_low32!=0xffffffff || addr1_high16!=0xffff);
|
|
|
|
if ( (( is_unicast)&&(priv->drv_rx_reg_val[DRV_RX_REG_IDX_PRINT_CFG]&DMESG_LOG_UNICAST)) ||
|
|
((!is_unicast)&&(priv->drv_rx_reg_val[DRV_RX_REG_IDX_PRINT_CFG]&DMESG_LOG_BROADCAST)) ||
|
|
(( fcs_ok==0)&&(priv->drv_rx_reg_val[DRV_RX_REG_IDX_PRINT_CFG]&DMESG_LOG_ERROR)) )
|
|
printk("%s openwifi_rx: %dB ht%daggr%d/%d sgi%d %dM FC%04x DI%04x ADDR%04x%08x/%04x%08x/%04x%08x SC%d fcs%d buf_idx%d %ddBm\n", sdr_compatible_str,
|
|
len, ht_flag, ht_aggr, ht_aggr_last, short_gi, wifi_rate_table[rate_idx], hdr->frame_control, hdr->duration_id,
|
|
reverse16(addr1_high16), reverse32(addr1_low32), reverse16(addr2_high16), reverse32(addr2_low32), reverse16(addr3_high16), reverse32(addr3_low32),
|
|
#ifdef USE_NEW_RX_INTERRUPT
|
|
seq_no, fcs_ok, i, signal);
|
|
#else
|
|
seq_no, fcs_ok, target_buf_idx_old, signal);
|
|
#endif
|
|
}
|
|
|
|
// priv->phy_rx_sn_hw_old = phy_rx_sn_hw;
|
|
if (content_ok) {
|
|
skb = dev_alloc_skb(len);
|
|
if (skb) {
|
|
skb_put_data(skb,pdata_tmp+16,len);
|
|
|
|
rx_status.antenna = priv->runtime_rx_ant_cfg;
|
|
// def in ieee80211_rate openwifi_rates 0~11. 0~3 11b(1M~11M), 4~11 11a/g(6M~54M)
|
|
rx_status.rate_idx = wifi_rate_table_mapping[rate_idx];
|
|
rx_status.signal = signal;
|
|
|
|
// rx_status.freq = dev->conf.chandef.chan->center_freq;
|
|
rx_status.freq = priv->actual_rx_lo;
|
|
// rx_status.band = dev->conf.chandef.chan->band;
|
|
rx_status.band = (rx_status.freq<2500?NL80211_BAND_2GHZ:NL80211_BAND_5GHZ);
|
|
|
|
rx_status.mactime = ( ( (u64)tsft_low ) | ( ((u64)tsft_high)<<32 ) );
|
|
rx_status.flag |= RX_FLAG_MACTIME_START;
|
|
if (!fcs_ok)
|
|
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
|
|
if (rate_idx <= 15)
|
|
rx_status.encoding = RX_ENC_LEGACY;
|
|
else
|
|
rx_status.encoding = RX_ENC_HT;
|
|
rx_status.bw = RATE_INFO_BW_20;
|
|
if (short_gi)
|
|
rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;
|
|
if(ht_aggr)
|
|
{
|
|
rx_status.ampdu_reference = priv->ampdu_reference;
|
|
rx_status.flag |= RX_FLAG_AMPDU_DETAILS | RX_FLAG_AMPDU_LAST_KNOWN;
|
|
if (ht_aggr_last)
|
|
rx_status.flag |= RX_FLAG_AMPDU_IS_LAST;
|
|
}
|
|
|
|
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); // put rx_status into skb->cb, from now on skb->cb is not dma_dsts any more.
|
|
ieee80211_rx_irqsafe(dev, skb); // call mac80211 function
|
|
} else
|
|
printk("%s openwifi_rx: WARNING dev_alloc_skb failed!\n", sdr_compatible_str);
|
|
|
|
if(ht_aggr_last)
|
|
priv->ampdu_reference++;
|
|
}
|
|
(*((u16*)(pdata_tmp+10))) = 0; // clear the field (set by rx_intf_pl_to_m_axis.v) to indicate the packet has been processed
|
|
loop_count++;
|
|
#ifndef USE_NEW_RX_INTERRUPT
|
|
target_buf_idx_old=((target_buf_idx_old+1)&(NUM_RX_BD-1));
|
|
#endif
|
|
}
|
|
|
|
if ( loop_count!=1 && (priv->drv_rx_reg_val[DRV_RX_REG_IDX_PRINT_CFG]&DMESG_LOG_ERROR) )
|
|
printk("%s openwifi_rx: WARNING loop_count %d\n", sdr_compatible_str,loop_count);
|
|
|
|
// openwifi_rx_out:
|
|
spin_unlock(&priv->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t openwifi_tx_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct ieee80211_hw *dev = dev_id;
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct openwifi_ring *ring, *drv_ring_tmp;
|
|
struct sk_buff *skb;
|
|
struct ieee80211_tx_info *info;
|
|
struct ieee80211_hdr *hdr;
|
|
u32 reg_val1, hw_queue_len, reg_val2, dma_fifo_no_room_flag, num_slot_random, cw, loop_count=0, addr1_low32, mcs_for_sysfs;
|
|
u16 seq_no, pkt_cnt, blk_ack_ssn, start_idx;
|
|
u8 nof_retx=-1, last_bd_rd_idx, i, prio, queue_idx, nof_retx_stat;
|
|
u64 blk_ack_bitmap;
|
|
// u16 prio_rd_idx_store[64]={0};
|
|
bool tx_fail=false, fpga_queue_has_room=false;
|
|
bool use_ht_aggr, pkt_need_ack, use_ht_rate, prio_wake_up_flag = false;
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
while(1) { // loop all packets that have been sent by FPGA
|
|
reg_val1 = tx_intf_api->TX_INTF_REG_PKT_INFO1_read();
|
|
reg_val2 = tx_intf_api->TX_INTF_REG_PKT_INFO2_read();
|
|
blk_ack_bitmap = (tx_intf_api->TX_INTF_REG_PKT_INFO3_read() | ((u64)tx_intf_api->TX_INTF_REG_PKT_INFO4_read())<<32);
|
|
|
|
if (reg_val1!=0xFFFFFFFF) {
|
|
nof_retx = (reg_val1&0xF);
|
|
last_bd_rd_idx = ((reg_val1>>5)&(NUM_TX_BD-1));
|
|
prio = ((reg_val1>>17)&0x3);
|
|
num_slot_random = ((reg_val1>>19)&0x1FF);
|
|
//num_slot_random = ((0xFF80000 ®_val1)>>(2+5+NUM_BIT_MAX_PHY_TX_SN+NUM_BIT_MAX_NUM_HW_QUEUE));
|
|
cw = ((reg_val1>>28)&0xF);
|
|
//cw = ((0xF0000000 & reg_val1) >> 28);
|
|
if(cw > 10) {
|
|
cw = 10 ;
|
|
num_slot_random += 512 ;
|
|
}
|
|
pkt_cnt = (reg_val2&0x3F);
|
|
blk_ack_ssn = ((reg_val2>>6)&0xFFF);
|
|
|
|
queue_idx = ((reg_val1>>15)&(MAX_NUM_HW_QUEUE-1));
|
|
dma_fifo_no_room_flag = tx_intf_api->TX_INTF_REG_S_AXIS_FIFO_NO_ROOM_read();
|
|
hw_queue_len = tx_intf_api->TX_INTF_REG_QUEUE_FIFO_DATA_COUNT_read();
|
|
// check which linux prio is stopped by this queue (queue_idx)
|
|
for (i=0; i<MAX_NUM_SW_QUEUE; i++) {
|
|
drv_ring_tmp = &(priv->tx_ring[i]);
|
|
if ( drv_ring_tmp->stop_flag == prio ) {
|
|
|
|
if ( ((dma_fifo_no_room_flag>>i)&1)==0 && (NUM_TX_BD-((hw_queue_len>>(i*8))&0xFF))>=RING_ROOM_THRESHOLD )
|
|
fpga_queue_has_room=true;
|
|
else
|
|
fpga_queue_has_room=false;
|
|
|
|
// Wake up Linux queue due to the current fpga queue releases some room
|
|
if( priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_NORMAL_QUEUE_STOP )
|
|
printk("%s openwifi_tx_interrupt: WARNING ieee80211_wake_queue prio%d i%d queue%d no room flag%x hwq len%08x wr%d rd%d\n", sdr_compatible_str,
|
|
prio, i, queue_idx, dma_fifo_no_room_flag, hw_queue_len, drv_ring_tmp->bd_wr_idx, last_bd_rd_idx);
|
|
|
|
if (fpga_queue_has_room) {
|
|
prio_wake_up_flag = true;
|
|
drv_ring_tmp->stop_flag = -1;
|
|
|
|
} else {
|
|
if( priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_NORMAL_QUEUE_STOP )
|
|
printk("%s openwifi_tx_interrupt: WARNING no room! prio_wake_up_flag%d\n", sdr_compatible_str, prio_wake_up_flag);
|
|
}
|
|
}
|
|
}
|
|
if (prio_wake_up_flag)
|
|
ieee80211_wake_queue(dev, prio);
|
|
|
|
ring = &(priv->tx_ring[queue_idx]);
|
|
for(i = 1; i <= pkt_cnt; i++)
|
|
{
|
|
ring->bd_rd_idx = (last_bd_rd_idx + i - pkt_cnt + 64)%64;
|
|
seq_no = ring->bds[ring->bd_rd_idx].seq_no;
|
|
|
|
if (seq_no == 0xffff) {// it has been forced cleared by the openwifi_tx (due to out-of-order Tx of different queues to the air?)
|
|
printk("%s openwifi_tx_interrupt: WARNING wr%d rd%d last_bd_rd_idx%d i%d pkt_cnt%d prio%d fpga q%d hwq len%d bd prio%d len_mpdu%d seq_no%d skb_linked%p dma_mapping_addr%llu\n", sdr_compatible_str,
|
|
ring->bd_wr_idx, ring->bd_rd_idx, last_bd_rd_idx, i, pkt_cnt, prio, queue_idx, hw_queue_len, ring->bds[ring->bd_rd_idx].prio, ring->bds[ring->bd_rd_idx].len_mpdu, seq_no, ring->bds[ring->bd_rd_idx].skb_linked, ring->bds[ring->bd_rd_idx].dma_mapping_addr);
|
|
continue;
|
|
}
|
|
|
|
skb = ring->bds[ring->bd_rd_idx].skb_linked;
|
|
|
|
dma_unmap_single(priv->tx_chan->device->dev,ring->bds[ring->bd_rd_idx].dma_mapping_addr,
|
|
skb->len, DMA_MEM_TO_DEV);
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
use_ht_aggr = ((info->flags&IEEE80211_TX_CTL_AMPDU)!=0);
|
|
ieee80211_tx_info_clear_status(info);
|
|
|
|
// Aggregation packet
|
|
if (use_ht_aggr)
|
|
{
|
|
start_idx = (seq_no>=blk_ack_ssn) ? (seq_no-blk_ack_ssn) : (seq_no+((~blk_ack_ssn+1)&0x0FFF));
|
|
tx_fail = (((blk_ack_bitmap>>start_idx)&0x1)==0);
|
|
info->flags |= IEEE80211_TX_STAT_AMPDU;
|
|
info->status.ampdu_len = 1;
|
|
info->status.ampdu_ack_len = (tx_fail == true) ? 0 : 1;
|
|
|
|
skb_pull(skb, LEN_MPDU_DELIM);
|
|
//skb_trim(skb, num_byte_pad_skb);
|
|
}
|
|
// Normal packet
|
|
else
|
|
{
|
|
tx_fail = ((blk_ack_bitmap&0x1)==0);
|
|
info->flags &= (~IEEE80211_TX_CTL_AMPDU);
|
|
}
|
|
|
|
pkt_need_ack = (!(info->flags & IEEE80211_TX_CTL_NO_ACK));
|
|
if (tx_fail == false)
|
|
info->flags |= IEEE80211_TX_STAT_ACK;
|
|
|
|
info->status.rates[0].count = nof_retx + 1; //according to our test, the 1st rate is the most important. we only do retry on the 1st rate
|
|
info->status.rates[1].idx = -1;
|
|
// info->status.rates[2].idx = -1;
|
|
// info->status.rates[3].idx = -1;//in mac80211.h: #define IEEE80211_TX_MAX_RATES 4
|
|
info->status.antenna = priv->runtime_tx_ant_cfg;
|
|
|
|
if ( ( (!pkt_need_ack)&&(priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_BROADCAST) ) || ( (pkt_need_ack)&&(priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_UNICAST) ) ){
|
|
printk("%s openwifi_tx_interrupt: tx_result [nof_retx %d pass %d] SC%d prio%d q%d wr%d rd%d num_slot%d cw%d hwq len%08x no_room_flag%x\n", sdr_compatible_str,
|
|
nof_retx+1, !tx_fail, seq_no, prio, queue_idx, ring->bd_wr_idx, ring->bd_rd_idx, num_slot_random, cw, hw_queue_len, dma_fifo_no_room_flag);
|
|
}
|
|
|
|
ieee80211_tx_status_irqsafe(dev, skb);
|
|
|
|
ring->bds[ring->bd_rd_idx].prio = 0xff; // invalid value
|
|
ring->bds[ring->bd_rd_idx].len_mpdu = 0; // invalid value
|
|
ring->bds[ring->bd_rd_idx].seq_no = 0xffff;
|
|
ring->bds[ring->bd_rd_idx].skb_linked = NULL;
|
|
ring->bds[ring->bd_rd_idx].dma_mapping_addr = 0;
|
|
}
|
|
|
|
loop_count++;
|
|
|
|
// printk("%s openwifi_tx_interrupt: loop %d prio %d rd %d\n", sdr_compatible_str, loop_count, prio, ring->bd_rd_idx);
|
|
|
|
} else
|
|
break;
|
|
}
|
|
if ( loop_count!=1 && ((priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG])&DMESG_LOG_ERROR) )
|
|
printk("%s openwifi_tx_interrupt: WARNING loop_count %d\n", sdr_compatible_str, loop_count);
|
|
|
|
spin_unlock(&priv->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
u32 crc_table[16] = {0x4DBDF21C, 0x500AE278, 0x76D3D2D4, 0x6B64C2B0, 0x3B61B38C, 0x26D6A3E8, 0x000F9344, 0x1DB88320, 0xA005713C, 0xBDB26158, 0x9B6B51F4, 0x86DC4190, 0xD6D930AC, 0xCB6E20C8, 0xEDB71064, 0xF0000000};
|
|
u32 gen_mpdu_crc(u8 *data_in, u32 num_bytes)
|
|
{
|
|
u32 i, crc = 0;
|
|
u8 idx;
|
|
for( i = 0; i < num_bytes; i++)
|
|
{
|
|
idx = (crc & 0x0F) ^ (data_in[i] & 0x0F);
|
|
crc = (crc >> 4) ^ crc_table[idx];
|
|
|
|
idx = (crc & 0x0F) ^ ((data_in[i] >> 4) & 0x0F);
|
|
crc = (crc >> 4) ^ crc_table[idx];
|
|
}
|
|
|
|
return crc;
|
|
}
|
|
|
|
u8 gen_mpdu_delim_crc(u16 m)
|
|
{
|
|
u8 i, temp, c[8] = {1, 1, 1, 1, 1, 1, 1, 1}, mpdu_delim_crc;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
{
|
|
temp = c[7] ^ ((m >> i) & 0x01);
|
|
|
|
c[7] = c[6];
|
|
c[6] = c[5];
|
|
c[5] = c[4];
|
|
c[4] = c[3];
|
|
c[3] = c[2];
|
|
c[2] = c[1] ^ temp;
|
|
c[1] = c[0] ^ temp;
|
|
c[0] = temp;
|
|
}
|
|
mpdu_delim_crc = ((~c[7] & 0x01) << 0) | ((~c[6] & 0x01) << 1) | ((~c[5] & 0x01) << 2) | ((~c[4] & 0x01) << 3) | ((~c[3] & 0x01) << 4) | ((~c[2] & 0x01) << 5) | ((~c[1] & 0x01) << 6) | ((~c[0] & 0x01) << 7);
|
|
|
|
return mpdu_delim_crc;
|
|
}
|
|
|
|
static inline struct gpio_led_data * //please align with the implementation in leds-gpio.c
|
|
cdev_to_gpio_led_data(struct led_classdev *led_cdev)
|
|
{
|
|
return container_of(led_cdev, struct gpio_led_data, cdev);
|
|
}
|
|
|
|
inline int calc_n_ofdm(int num_octet, int n_dbps)
|
|
{
|
|
int num_bit, num_ofdm_sym;
|
|
|
|
num_bit = 22+num_octet*8;
|
|
num_ofdm_sym = (num_bit/n_dbps) + ((num_bit%n_dbps)!=0);
|
|
|
|
return (num_ofdm_sym);
|
|
}
|
|
|
|
inline __le16 gen_ht_duration_id(__le16 frame_control, __le16 aid, u8 qos_hdr, bool use_ht_aggr, u16 rate_hw_value, u16 sifs)
|
|
{
|
|
// COTS wifi ht QoS data duration field analysis (lots of capture):
|
|
|
|
// ht non-aggr QoS data: 44, type 2 (data frame) sub-type 8 (1000) 21.7/52/57.8/58.5/65Mbps
|
|
// ack ht 36 + 4*[(22+14*8)/78] = 36 + 4*2 = 44
|
|
// ack legacy 20 + 4*[(22+14*8)/72] = 20 + 4*2 = 28
|
|
|
|
// ht non-aggr QoS data: 60, type 2 (data frame) sub-type 8 (1000) 6.5Mbps
|
|
// ack ht 36 + 4*[(22+14*8)/26] = 36 + 4*6 = 60
|
|
// ack legacy 20 + 4*[(22+14*8)/24] = 20 + 4*6 = 44
|
|
|
|
// ht aggr QoS data: 52, type 2 (data frame) sub-type 8 (1000) 19.5/28.9/39/57.8/65/72.2Mbps
|
|
// ack ht 36 + 4*[(22+32*8)/78] = 36 + 4*4 = 52
|
|
// ack legacy 20 + 4*[(22+32*8)/72] = 20 + 4*4 = 36
|
|
|
|
// ht aggr QoS data: 60, type 2 (data frame) sub-type 8 (1000) 13/14.4Mbps
|
|
// ack ht 36 + 4*[(22+32*8)/52] = 36 + 4*6 = 60
|
|
// ack legacy 20 + 4*[(22+32*8)/48] = 20 + 4*6 = 44
|
|
|
|
// ht and legacy rate mapping is ont one on one, instead it is modulation combined with coding rate
|
|
// modulate coding ht-mcs ht-n_dbps legacy-mcs legacy-n_dbps
|
|
// BPSK 1/2 0 26 4 24
|
|
// QPSK 1/2 1 52 6 48
|
|
// QPSK 3/4 2 78 7 72
|
|
// 16QAM 1/2 3 104 8 96
|
|
// 16QAM 3/4 4 156 9 144
|
|
// 64QAM 2/3 5 208 10 192
|
|
// 64QAM 3/4 6 234 11 216
|
|
|
|
// conclusion: duration is: assume ack/blk-ack uses legacy, plus SIFS
|
|
|
|
// other observation: ht always use QoS data, not data (sub-type)
|
|
// other observation: management/control frame always in non-ht
|
|
|
|
__le16 dur = 0;
|
|
u16 n_dbps;
|
|
int num_octet, num_ofdm_sym;
|
|
|
|
if (ieee80211_is_pspoll(frame_control)) {
|
|
dur = (aid|0xc000);
|
|
} else if (ieee80211_is_data_qos(frame_control) && (~(qos_hdr&IEEE80211_QOS_CTL_ACK_POLICY_NOACK))) {
|
|
rate_hw_value = (rate_hw_value>6?6:rate_hw_value);
|
|
n_dbps = (rate_hw_value==0?wifi_n_dbps_table[4]:wifi_n_dbps_table[rate_hw_value+5]);
|
|
num_octet = (use_ht_aggr?32:14); //32 bytes for compressed block ack; 14 bytes for normal ack
|
|
num_ofdm_sym = calc_n_ofdm(num_octet, n_dbps);
|
|
dur = sifs + 20 + 4*num_ofdm_sym; // 20us legacy preamble
|
|
// printk("%s gen_ht_duration_id: num_octet %d n_dbps %d num_ofdm_sym %d dur %d\n", sdr_compatible_str,
|
|
// num_octet, n_dbps, num_ofdm_sym, dur);
|
|
} else {
|
|
printk("%s openwifi_tx: WARNING gen_ht_duration_id wrong pkt type!\n", sdr_compatible_str);
|
|
}
|
|
|
|
return dur;
|
|
}
|
|
|
|
inline void report_pkt_loss_due_to_driver_drop(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct ieee80211_tx_info *info;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
ieee80211_tx_info_clear_status(info);
|
|
info->status.rates[0].count = 1;
|
|
info->status.rates[1].idx = -1;
|
|
info->status.antenna = priv->runtime_tx_ant_cfg;
|
|
ieee80211_tx_status_irqsafe(dev, skb);
|
|
}
|
|
|
|
static void openwifi_tx(struct ieee80211_hw *dev,
|
|
struct ieee80211_tx_control *control,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
unsigned long flags;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct openwifi_ring *ring = NULL;
|
|
struct sk_buff *skb_new; // temp skb for internal use
|
|
struct ieee80211_tx_info *info_skipped;
|
|
dma_addr_t dma_mapping_addr;
|
|
unsigned int i, j, empty_bd_idx = 0;
|
|
u16 rate_signal_value, rate_hw_value, len_mpdu, len_psdu, num_dma_symbol, len_mpdu_delim_pad=0, num_byte_pad;
|
|
u32 num_dma_byte, addr1_low32, addr2_low32=0, addr3_low32=0, tx_config, cts_reg, phy_hdr_config;//, openofdm_state_history;
|
|
u16 addr1_high16, addr2_high16=0, addr3_high16=0, sc, seq_no=0, cts_duration=0, cts_rate_hw_value=0, cts_rate_signal_value=0, sifs, ack_duration=0, traffic_pkt_duration, n_dbps;
|
|
u8 pkt_need_ack, retry_limit_raw,use_short_gi,*dma_buf,retry_limit_hw_value,rc_flags,qos_hdr,prio,queue_idx,drv_ring_idx;
|
|
bool drv_seqno=false, use_rts_cts, use_cts_protect, ht_aggr_start=false, use_ht_rate, use_ht_aggr, cts_use_traffic_rate=false, force_use_cts_protect=false;
|
|
__le16 frame_control,duration_id;
|
|
u32 dma_fifo_no_room_flag, hw_queue_len, delay_count=0;
|
|
enum dma_status status;
|
|
|
|
static u32 addr1_low32_prev = -1;
|
|
static u16 rate_hw_value_prev = -1;
|
|
static u8 pkt_need_ack_prev = -1;
|
|
static u16 addr1_high16_prev = -1;
|
|
static __le16 duration_id_prev = -1;
|
|
static u8 prio_prev = -1;
|
|
static u8 retry_limit_raw_prev = -1;
|
|
static u8 use_short_gi_prev = -1;
|
|
|
|
// static bool led_status=0;
|
|
// struct gpio_led_data *led_dat = cdev_to_gpio_led_data(priv->led[3]);
|
|
|
|
// if ( (priv->phy_tx_sn&7) ==0 ) {
|
|
// openofdm_state_history = openofdm_rx_api->OPENOFDM_RX_REG_STATE_HISTORY_read();
|
|
// if (openofdm_state_history!=openofdm_state_history_old){
|
|
// led_status = (~led_status);
|
|
// openofdm_state_history_old = openofdm_state_history;
|
|
// gpiod_set_value(led_dat->gpiod, led_status);
|
|
// }
|
|
// }
|
|
|
|
if (skb->data_len>0) {// more data are not in linear data area skb->data
|
|
printk("%s openwifi_tx: WARNING skb->data_len>0\n", sdr_compatible_str);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
|
|
len_mpdu = skb->len;
|
|
|
|
// get Linux priority/queue setting info and target mac address
|
|
prio = skb_get_queue_mapping(skb);
|
|
if (prio >= MAX_NUM_HW_QUEUE) {
|
|
printk("%s openwifi_tx: WARNING prio%d\n", sdr_compatible_str, prio);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
|
|
addr1_low32 = *((u32*)(hdr->addr1+2));
|
|
|
|
// ---- DO your idea here! Map Linux/SW "prio" to driver "drv_ring_idx" (then 1on1 to FPGA queue_idx) ---
|
|
if (priv->slice_idx == 0xFFFFFFFF) {// use Linux default prio setting, if there isn't any slice config
|
|
drv_ring_idx = prio;
|
|
} else {// customized prio to drv_ring_idx mapping
|
|
// check current packet belonging to which slice/hw-queue
|
|
for (i=0; i<MAX_NUM_HW_QUEUE; i++) {
|
|
if ( priv->dest_mac_addr_queue_map[i] == addr1_low32 ) {
|
|
break;
|
|
}
|
|
}
|
|
drv_ring_idx = (i>=MAX_NUM_HW_QUEUE?prio:i); // if no address is hit
|
|
}
|
|
|
|
ring = &(priv->tx_ring[drv_ring_idx]);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (ring->bds[ring->bd_wr_idx].seq_no != 0xffff) { // not cleared yet by interrupt
|
|
for (i=1; i<NUM_TX_BD; i++) {
|
|
if (ring->bds[(ring->bd_wr_idx+i)&(NUM_TX_BD-1)].seq_no == 0xffff) {
|
|
empty_bd_idx = i;
|
|
break;
|
|
}
|
|
}
|
|
hw_queue_len = tx_intf_api->TX_INTF_REG_QUEUE_FIFO_DATA_COUNT_read();
|
|
if (empty_bd_idx) { // clear all bds before the empty bd and report failure to Linux
|
|
for (i=0; i<empty_bd_idx; i++) {
|
|
j = ( (ring->bd_wr_idx+i)&(NUM_TX_BD-1) );
|
|
printk("%s openwifi_tx: WARNING fake stop queue empty_bd_idx%d i%d lnx prio%d map to q%d stop%d hwq len%d wr%d rd%d bd prio%d len_mpdu%d seq_no%d skb_linked%p dma_mapping_addr%llu\n", sdr_compatible_str,
|
|
empty_bd_idx, i, prio, drv_ring_idx, ring->stop_flag, hw_queue_len, ring->bd_wr_idx, ring->bd_rd_idx, ring->bds[j].prio, ring->bds[j].len_mpdu, ring->bds[j].seq_no, ring->bds[j].skb_linked, ring->bds[j].dma_mapping_addr);
|
|
// tell Linux this skb failed
|
|
skb_new = ring->bds[j].skb_linked;
|
|
dma_unmap_single(priv->tx_chan->device->dev,ring->bds[j].dma_mapping_addr,
|
|
skb_new->len, DMA_MEM_TO_DEV);
|
|
info_skipped = IEEE80211_SKB_CB(skb_new);
|
|
ieee80211_tx_info_clear_status(info_skipped);
|
|
info_skipped->status.rates[0].count = 1;
|
|
info_skipped->status.rates[1].idx = -1;
|
|
info_skipped->status.antenna = priv->runtime_tx_ant_cfg;
|
|
ieee80211_tx_status_irqsafe(dev, skb_new);
|
|
|
|
ring->bds[j].prio = 0xff; // invalid value
|
|
ring->bds[j].len_mpdu = 0; // invalid value
|
|
ring->bds[j].seq_no = 0xffff;
|
|
ring->bds[j].skb_linked = NULL;
|
|
ring->bds[j].dma_mapping_addr = 0;
|
|
|
|
}
|
|
if (ring->stop_flag != -1) { //the interrupt seems will never come, we need to wake up the queue in case the interrupt will never wake it up
|
|
ieee80211_wake_queue(dev, ring->stop_flag);
|
|
ring->stop_flag = -1;
|
|
}
|
|
} else {
|
|
j = ring->bd_wr_idx;
|
|
printk("%s openwifi_tx: WARNING real stop queue lnx prio%d map to q%d stop%d hwq len%d wr%d rd%d bd prio%d len_mpdu%d seq_no%d skb_linked%p dma_mapping_addr%llu\n", sdr_compatible_str,
|
|
prio, drv_ring_idx, ring->stop_flag, hw_queue_len, ring->bd_wr_idx, ring->bd_rd_idx, ring->bds[j].prio, ring->bds[j].len_mpdu, ring->bds[j].seq_no, ring->bds[j].skb_linked, ring->bds[j].dma_mapping_addr);
|
|
|
|
ieee80211_stop_queue(dev, prio); // here we should stop those prio related to the queue idx flag set in TX_INTF_REG_S_AXIS_FIFO_NO_ROOM_read
|
|
ring->stop_flag = prio;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
// -------------------- end of Map Linux/SW "prio" to driver "drv_ring_idx" ------------------
|
|
|
|
// get other info from packet header
|
|
addr1_high16 = *((u16*)(hdr->addr1));
|
|
if (len_mpdu>=20) {
|
|
addr2_low32 = *((u32*)(hdr->addr2+2));
|
|
addr2_high16 = *((u16*)(hdr->addr2));
|
|
}
|
|
if (len_mpdu>=26) {
|
|
addr3_low32 = *((u32*)(hdr->addr3+2));
|
|
addr3_high16 = *((u16*)(hdr->addr3));
|
|
}
|
|
|
|
frame_control=hdr->frame_control;
|
|
pkt_need_ack = (!(info->flags&IEEE80211_TX_CTL_NO_ACK));
|
|
|
|
retry_limit_raw = info->control.rates[0].count;
|
|
|
|
rc_flags = info->control.rates[0].flags;
|
|
use_rts_cts = ((rc_flags&IEEE80211_TX_RC_USE_RTS_CTS)!=0);
|
|
use_cts_protect = ((rc_flags&IEEE80211_TX_RC_USE_CTS_PROTECT)!=0);
|
|
use_ht_rate = ((rc_flags&IEEE80211_TX_RC_MCS)!=0);
|
|
use_short_gi = ((rc_flags&IEEE80211_TX_RC_SHORT_GI)!=0);
|
|
use_ht_aggr = ((info->flags&IEEE80211_TX_CTL_AMPDU)!=0);
|
|
qos_hdr = (*(ieee80211_get_qos_ctl(hdr)));
|
|
|
|
// get Linux rate (MCS) setting
|
|
rate_hw_value = ieee80211_get_tx_rate(dev, info)->hw_value;
|
|
// drv_tx_reg_val[DRV_TX_REG_IDX_RATE]
|
|
// override rate legacy: 4:6M, 5:9M, 6:12M, 7:18M, 8:24M, 9:36M, 10:48M, 11:54M
|
|
// drv_tx_reg_val[DRV_TX_REG_IDX_RATE_HT]
|
|
// override rate ht: 4:6.5M, 5:13M, 6:19.5M,7:26M, 8:39M, 9:52M, 10:58.5M, 11:65M
|
|
if ( ieee80211_is_data(hdr->frame_control) ) {//rate override command
|
|
if (use_ht_rate && priv->drv_tx_reg_val[DRV_TX_REG_IDX_RATE_HT]>0) {
|
|
rate_hw_value = (priv->drv_tx_reg_val[DRV_TX_REG_IDX_RATE_HT]&0xF)-4;
|
|
use_short_gi = ((priv->drv_tx_reg_val[DRV_TX_REG_IDX_RATE_HT]&0x10)==0x10);
|
|
} else if ((!use_ht_rate) && priv->drv_tx_reg_val[DRV_TX_REG_IDX_RATE]>0)
|
|
rate_hw_value = (priv->drv_tx_reg_val[DRV_TX_REG_IDX_RATE]&0xF);
|
|
// TODO: need to map rate_hw_value back to info->control.rates[0].idx!!!
|
|
}
|
|
|
|
// Workaround for a FPGA bug: if aggr happens on ht mcs 0, the tx core will never end, running eneless and stuck the low MAC!
|
|
if (use_ht_aggr && rate_hw_value==0)
|
|
rate_hw_value = 1;
|
|
|
|
sifs = (priv->actual_rx_lo<2500?10:16);
|
|
|
|
if (use_ht_rate) {
|
|
// printk("%s openwifi_tx: rate_hw_value %d aggr %d sifs %d\n", sdr_compatible_str, rate_hw_value, use_ht_aggr, sifs);
|
|
hdr->duration_id = gen_ht_duration_id(frame_control, control->sta->aid, qos_hdr, use_ht_aggr, rate_hw_value, sifs); //linux only do it for 11a/g, not for 11n and later
|
|
}
|
|
duration_id = hdr->duration_id;
|
|
|
|
if (use_rts_cts)
|
|
printk("%s openwifi_tx: WARNING sn %d use_rts_cts is not supported!\n", sdr_compatible_str, ring->bd_wr_idx);
|
|
|
|
if (use_cts_protect) {
|
|
cts_rate_hw_value = ieee80211_get_rts_cts_rate(dev, info)->hw_value;
|
|
cts_duration = le16_to_cpu(ieee80211_ctstoself_duration(dev,info->control.vif,len_mpdu,info));
|
|
} else if (force_use_cts_protect) { // could override mac80211 setting here.
|
|
cts_rate_hw_value = 4; //wifi_mcs_table_11b_force_up[] translate it to 1011(6M)
|
|
if (pkt_need_ack)
|
|
ack_duration = 44;//assume the ack we wait use 6Mbps: 4*ceil((22+14*8)/24) + 20(preamble+SIGNAL)
|
|
|
|
n_dbps = (use_ht_rate?wifi_n_dbps_ht_table[rate_hw_value+4]:wifi_n_dbps_table[rate_hw_value]);
|
|
traffic_pkt_duration = (use_ht_rate?36:20) + 4*calc_n_ofdm(len_mpdu, n_dbps);
|
|
cts_duration = traffic_pkt_duration + sifs + pkt_need_ack*(sifs+ack_duration);
|
|
}
|
|
|
|
// this is 11b stuff
|
|
// if (info->flags&IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
|
|
// printk("%s openwifi_tx: WARNING IEEE80211_TX_RC_USE_SHORT_PREAMBLE\n", sdr_compatible_str);
|
|
|
|
if (len_mpdu>=28) {
|
|
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
|
|
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) {
|
|
priv->seqno += 0x10;
|
|
drv_seqno = true;
|
|
}
|
|
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
|
|
hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
|
|
}
|
|
sc = hdr->seq_ctrl;
|
|
seq_no = (sc&IEEE80211_SCTL_SEQ)>>4;
|
|
}
|
|
|
|
// printk("%s openwifi_tx: rate&try: %d %d %03x; %d %d %03x; %d %d %03x; %d %d %03x\n", sdr_compatible_str,
|
|
// info->status.rates[0].idx,info->status.rates[0].count,info->status.rates[0].flags,
|
|
// info->status.rates[1].idx,info->status.rates[1].count,info->status.rates[1].flags,
|
|
// info->status.rates[2].idx,info->status.rates[2].count,info->status.rates[2].flags,
|
|
// info->status.rates[3].idx,info->status.rates[3].count,info->status.rates[3].flags);
|
|
|
|
// -----------end of preprocess some info from header and skb----------------
|
|
|
|
// /* HW will perform RTS-CTS when only RTS flags is set.
|
|
// * HW will perform CTS-to-self when both RTS and CTS flags are set.
|
|
// * RTS rate and RTS duration will be used also for CTS-to-self.
|
|
// */
|
|
// if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
|
|
// tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
|
|
// rts_duration = ieee80211_rts_duration(dev, priv->vif[0], // assume all vif have the same config
|
|
// len_mpdu, info);
|
|
// printk("%s openwifi_tx: rc_flags & IEEE80211_TX_RC_USE_RTS_CTS\n", sdr_compatible_str);
|
|
// } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
|
|
// tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
|
|
// rts_duration = ieee80211_ctstoself_duration(dev, priv->vif[0], // assume all vif have the same config
|
|
// len_mpdu, info);
|
|
// printk("%s openwifi_tx: rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT\n", sdr_compatible_str);
|
|
// }
|
|
|
|
if(use_ht_aggr)
|
|
{
|
|
if(ieee80211_is_data_qos(frame_control) == false)
|
|
{
|
|
printk("%s openwifi_tx: WARNING packet is not QoS packet!\n", sdr_compatible_str);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
|
|
// psdu = [ MPDU DEL | MPDU | CRC | MPDU padding ]
|
|
len_mpdu_delim_pad = ((len_mpdu + LEN_PHY_CRC)%4 == 0) ? 0 :(4 - (len_mpdu + LEN_PHY_CRC)%4);
|
|
len_psdu = LEN_MPDU_DELIM + len_mpdu + LEN_PHY_CRC + len_mpdu_delim_pad;
|
|
|
|
if( (addr1_low32 != addr1_low32_prev) || (addr1_high16 != addr1_high16_prev) || (duration_id != duration_id_prev) ||
|
|
(rate_hw_value != rate_hw_value_prev) || (use_short_gi != use_short_gi_prev) ||
|
|
(prio != prio_prev) || (retry_limit_raw != retry_limit_raw_prev) || (pkt_need_ack != pkt_need_ack_prev) )
|
|
{
|
|
addr1_low32_prev = addr1_low32;
|
|
addr1_high16_prev = addr1_high16;
|
|
duration_id_prev = duration_id;
|
|
rate_hw_value_prev = rate_hw_value;
|
|
use_short_gi_prev = use_short_gi;
|
|
prio_prev = prio;
|
|
retry_limit_raw_prev = retry_limit_raw;
|
|
pkt_need_ack_prev = pkt_need_ack;
|
|
|
|
ht_aggr_start = true;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
// psdu = [ MPDU ]
|
|
len_psdu = len_mpdu;
|
|
|
|
// // Don't need to reset _prev variables every time when it is not ht aggr qos data. Reason:
|
|
// // 1. In 99.9999% cases, the ht always use qos data and goes to prio/queue_idx 2. By not resetting the variable to -1, we can have continuous aggregation packet operation in FPGA queue 2.
|
|
// // 2. In other words, the aggregation operation for queue 2 in FPGA won't be interrupted by other non aggregation packets (control/management/beacon/etc.) that go to queue 0 (or other queues than 2).
|
|
// // 3. From wired domain and upper level ( DSCP, AC (0~3), WMM management, 802.11D service classes and user priority (UP) ) to chip/FPGA queue index, thre should be some (complicated) mapping relationship.
|
|
// // 4. More decent design is setting these aggregation flags (ht_aggr_start) per queue/prio here in driver. But since now only queue 2 and 0 are used (data goes to queue 2, others go to queue 0) in normal (most) cases, let's not go to the decent (complicated) solution immediately.
|
|
// addr1_low32_prev = -1;
|
|
// addr1_high16_prev = -1;
|
|
// duration_id_prev = -1;
|
|
// use_short_gi_prev = -1;
|
|
// rate_hw_value_prev = -1;
|
|
// prio_prev = -1;
|
|
// retry_limit_raw_prev = -1;
|
|
// pkt_need_ack_prev = -1;
|
|
}
|
|
num_dma_symbol = (len_psdu>>TX_INTF_NUM_BYTE_PER_DMA_SYMBOL_IN_BITS) + ((len_psdu&(TX_INTF_NUM_BYTE_PER_DMA_SYMBOL-1))!=0);
|
|
|
|
if ( ( (!pkt_need_ack)&&(priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_BROADCAST) ) || ( (pkt_need_ack)&&(priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_UNICAST) ) )
|
|
printk("%s openwifi_tx: %dB RC%x %dM FC%04x DI%04x ADDR%04x%08x/%04x%08x/%04x%08x flag%08x QoS%02x SC%d_%d retr%d ack%d prio%d q%d wr%d rd%d\n", sdr_compatible_str,
|
|
len_mpdu, rc_flags, (use_ht_rate == false ? wifi_rate_all[rate_hw_value] : wifi_rate_all[rate_hw_value + 12]),frame_control,duration_id,
|
|
reverse16(addr1_high16), reverse32(addr1_low32), reverse16(addr2_high16), reverse32(addr2_low32), reverse16(addr3_high16), reverse32(addr3_low32),
|
|
info->flags, qos_hdr, seq_no, drv_seqno, retry_limit_raw, pkt_need_ack, prio, drv_ring_idx,
|
|
// use_rts_cts,use_cts_protect|force_use_cts_protect,wifi_rate_all[cts_rate_hw_value],cts_duration,
|
|
ring->bd_wr_idx,ring->bd_rd_idx);
|
|
|
|
// check whether the packet is bigger than DMA buffer size
|
|
num_dma_byte = (num_dma_symbol<<TX_INTF_NUM_BYTE_PER_DMA_SYMBOL_IN_BITS);
|
|
if (num_dma_byte > TX_BD_BUF_SIZE) {
|
|
printk("%s openwifi_tx: WARNING sn %d num_dma_byte > TX_BD_BUF_SIZE\n", sdr_compatible_str, ring->bd_wr_idx);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
|
|
// Copy MPDU delimiter and padding into sk_buff
|
|
if(use_ht_aggr)
|
|
{
|
|
// when skb does not have enough headroom, skb_push will cause kernel panic. headroom needs to be extended if necessary
|
|
if (skb_headroom(skb)<LEN_MPDU_DELIM) {// in case original skb headroom is not enough to host MPDU delimiter
|
|
printk("%s openwifi_tx: WARNING(AGGR) sn %d skb_headroom(skb) %d < LEN_MPDU_DELIM %d\n", sdr_compatible_str, ring->bd_wr_idx, skb_headroom(skb), LEN_MPDU_DELIM);
|
|
if ((skb_new = skb_realloc_headroom(skb, LEN_MPDU_DELIM)) == NULL) {
|
|
printk("%s openwifi_tx: WARNING sn %d skb_realloc_headroom failed!\n", sdr_compatible_str, ring->bd_wr_idx);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
if (skb->sk != NULL)
|
|
skb_set_owner_w(skb_new, skb->sk);
|
|
dev_kfree_skb(skb);
|
|
skb = skb_new;
|
|
}
|
|
skb_push( skb, LEN_MPDU_DELIM );
|
|
dma_buf = skb->data;
|
|
|
|
// fill in MPDU delimiter
|
|
*((u16*)(dma_buf+0)) = ((u16)(len_mpdu+LEN_PHY_CRC) << 4) & 0xFFF0;
|
|
*((u8 *)(dma_buf+2)) = gen_mpdu_delim_crc(*((u16 *)dma_buf));
|
|
*((u8 *)(dma_buf+3)) = 0x4e;
|
|
|
|
// Extend sk_buff to hold CRC + MPDU padding + empty MPDU delimiter
|
|
num_byte_pad = num_dma_byte - (LEN_MPDU_DELIM + len_mpdu);
|
|
if (skb_tailroom(skb)<num_byte_pad) {// in case original skb tailroom is not enough to host num_byte_pad
|
|
printk("%s openwifi_tx: WARNING(AGGR) sn %d skb_tailroom(skb) %d < num_byte_pad %d!\n", sdr_compatible_str, ring->bd_wr_idx, skb_tailroom(skb), num_byte_pad);
|
|
if ((skb_new = skb_copy_expand(skb, skb_headroom(skb), num_byte_pad, GFP_KERNEL)) == NULL) {
|
|
printk("%s openwifi_tx: WARNING(AGGR) sn %d skb_copy_expand failed!\n", sdr_compatible_str, ring->bd_wr_idx);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
if (skb->sk != NULL)
|
|
skb_set_owner_w(skb_new, skb->sk);
|
|
dev_kfree_skb(skb);
|
|
skb = skb_new;
|
|
}
|
|
skb_put( skb, num_byte_pad );
|
|
|
|
// fill in MPDU CRC
|
|
*((u32*)(dma_buf+LEN_MPDU_DELIM+len_mpdu)) = gen_mpdu_crc(dma_buf+LEN_MPDU_DELIM, len_mpdu);
|
|
|
|
// fill in MPDU delimiter padding
|
|
memset(dma_buf+LEN_MPDU_DELIM+len_mpdu+LEN_PHY_CRC, 0, len_mpdu_delim_pad);
|
|
|
|
// num_dma_byte is on 8-byte boundary and len_psdu is on 4 byte boundary.
|
|
// If they have different lengths, add "empty MPDU delimiter" for alignment
|
|
if(num_dma_byte == len_psdu + 4)
|
|
{
|
|
*((u32*)(dma_buf+len_psdu)) = 0x4e140000;
|
|
len_psdu = num_dma_byte;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
// Extend sk_buff to hold padding
|
|
num_byte_pad = num_dma_byte - len_mpdu;
|
|
if (skb_tailroom(skb)<num_byte_pad) {// in case original skb tailroom is not enough to host num_byte_pad
|
|
printk("%s openwifi_tx: WARNING sn %d skb_tailroom(skb) %d < num_byte_pad %d!\n", sdr_compatible_str, ring->bd_wr_idx, skb_tailroom(skb), num_byte_pad);
|
|
if ((skb_new = skb_copy_expand(skb, skb_headroom(skb), num_byte_pad, GFP_KERNEL)) == NULL) {
|
|
printk("%s openwifi_tx: WARNING sn %d skb_copy_expand failed!\n", sdr_compatible_str, ring->bd_wr_idx);
|
|
goto openwifi_tx_early_out;
|
|
}
|
|
if (skb->sk != NULL)
|
|
skb_set_owner_w(skb_new, skb->sk);
|
|
dev_kfree_skb(skb);
|
|
skb = skb_new;
|
|
}
|
|
skb_put( skb, num_byte_pad );
|
|
|
|
dma_buf = skb->data;
|
|
}
|
|
// for(i = 0; i <= num_dma_symbol; i++)
|
|
// printk("%16llx\n", (*(u64*)(&(dma_buf[i*8]))));
|
|
|
|
rate_signal_value = (use_ht_rate ? rate_hw_value : wifi_mcs_table_11b_force_up[rate_hw_value]);
|
|
|
|
retry_limit_hw_value = ( retry_limit_raw==0?0:((retry_limit_raw - 1)&0xF) );
|
|
|
|
queue_idx = drv_ring_idx; // from driver ring idx to FPGA queue_idx mapping
|
|
|
|
cts_rate_signal_value = wifi_mcs_table_11b_force_up[cts_rate_hw_value];
|
|
cts_reg = ((use_cts_protect|force_use_cts_protect)<<31 | cts_use_traffic_rate<<30 | cts_duration<<8 | cts_rate_signal_value<<4 | rate_signal_value);
|
|
tx_config = ( prio<<26 | ring->bd_wr_idx<<20 | queue_idx<<18 | retry_limit_hw_value<<14 | pkt_need_ack<<13 | num_dma_symbol );
|
|
phy_hdr_config = ( ht_aggr_start<<20 | rate_hw_value<<16 | use_ht_rate<<15 | use_short_gi<<14 | use_ht_aggr<<13 | len_psdu );
|
|
|
|
/* We must be sure that tx_flags is written last because the HW
|
|
* looks at it to check if the rest of data is valid or not
|
|
*/
|
|
//wmb();
|
|
// entry->flags = cpu_to_le32(tx_flags);
|
|
/* We must be sure this has been written before following HW
|
|
* register write, because this write will make the HW attempts
|
|
* to DMA the just-written data
|
|
*/
|
|
//wmb();
|
|
|
|
spin_lock_irqsave(&priv->lock, flags); // from now on, we'd better avoid interrupt because ring->stop_flag is shared with interrupt
|
|
|
|
// -------------check whether FPGA dma fifo and queue (queue_idx) has enough room-------------
|
|
dma_fifo_no_room_flag = tx_intf_api->TX_INTF_REG_S_AXIS_FIFO_NO_ROOM_read();
|
|
hw_queue_len = tx_intf_api->TX_INTF_REG_QUEUE_FIFO_DATA_COUNT_read();
|
|
if ( ((dma_fifo_no_room_flag>>queue_idx)&1) || ((NUM_TX_BD-((hw_queue_len>>(queue_idx*8))&0xFF))<=RING_ROOM_THRESHOLD) || ring->stop_flag>=0 ) {
|
|
if( priv->drv_tx_reg_val[DRV_TX_REG_IDX_PRINT_CFG]&DMESG_LOG_NORMAL_QUEUE_STOP )
|
|
printk("%s openwifi_tx: WARNING ieee80211_stop_queue prio%d queue%d no room flag%x hwq len%08x request%d wr%d rd%d\n", sdr_compatible_str,
|
|
prio, queue_idx, dma_fifo_no_room_flag, hw_queue_len, num_dma_symbol, ring->bd_wr_idx, ring->bd_rd_idx);
|
|
|
|
ieee80211_stop_queue(dev, prio); // here we should stop those prio related to the queue idx flag set in TX_INTF_REG_S_AXIS_FIFO_NO_ROOM_read
|
|
ring->stop_flag = prio;
|
|
// goto openwifi_tx_early_out_after_lock;
|
|
}
|
|
// --------end of check whether FPGA fifo (queue_idx) has enough room------------
|
|
|
|
status = dma_async_is_tx_complete(priv->tx_chan, priv->tx_cookie, NULL, NULL);
|
|
while(delay_count<100 && status!=DMA_COMPLETE) {
|
|
status = dma_async_is_tx_complete(priv->tx_chan, priv->tx_cookie, NULL, NULL);
|
|
delay_count++;
|
|
udelay(4);
|
|
// udelay(priv->stat.dbg_ch1);
|
|
}
|
|
if (status!=DMA_COMPLETE) {
|
|
printk("%s openwifi_tx: WARNING status!=DMA_COMPLETE\n", sdr_compatible_str);
|
|
goto openwifi_tx_early_out_after_lock;
|
|
}
|
|
|
|
//-------------------------fire skb DMA to hardware----------------------------------
|
|
dma_mapping_addr = dma_map_single(priv->tx_chan->device->dev, dma_buf,
|
|
num_dma_byte, DMA_MEM_TO_DEV);
|
|
|
|
if (dma_mapping_error(priv->tx_chan->device->dev,dma_mapping_addr)) {
|
|
// dev_err(priv->tx_chan->device->dev, "sdr,sdr openwifi_tx: WARNING TX DMA mapping error\n");
|
|
printk("%s openwifi_tx: WARNING sn %d TX DMA mapping error\n", sdr_compatible_str, ring->bd_wr_idx);
|
|
goto openwifi_tx_early_out_after_lock;
|
|
}
|
|
|
|
sg_init_table(&(priv->tx_sg), 1); // only need to be initialized once in openwifi_start
|
|
sg_dma_address( &(priv->tx_sg) ) = dma_mapping_addr;
|
|
sg_dma_len( &(priv->tx_sg) ) = num_dma_byte;
|
|
|
|
tx_intf_api->TX_INTF_REG_CTS_TOSELF_CONFIG_write(cts_reg);
|
|
tx_intf_api->TX_INTF_REG_TX_CONFIG_write(tx_config);
|
|
tx_intf_api->TX_INTF_REG_PHY_HDR_CONFIG_write(phy_hdr_config);
|
|
priv->txd = priv->tx_chan->device->device_prep_slave_sg(priv->tx_chan, &(priv->tx_sg),1,DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT, NULL);
|
|
if (!(priv->txd)) {
|
|
printk("%s openwifi_tx: WARNING sn %d device_prep_slave_sg %p\n", sdr_compatible_str, ring->bd_wr_idx, (void*)(priv->txd));
|
|
goto openwifi_tx_after_dma_mapping;
|
|
}
|
|
|
|
priv->tx_cookie = priv->txd->tx_submit(priv->txd);
|
|
|
|
if (dma_submit_error(priv->tx_cookie)) {
|
|
printk("%s openwifi_tx: WARNING sn %d dma_submit_error(tx_cookie) %d\n", sdr_compatible_str, ring->bd_wr_idx, (u32)(priv->tx_cookie));
|
|
goto openwifi_tx_after_dma_mapping;
|
|
}
|
|
|
|
// seems everything is ok. let's mark this pkt in bd descriptor ring
|
|
ring->bds[ring->bd_wr_idx].prio = prio;
|
|
ring->bds[ring->bd_wr_idx].len_mpdu = len_mpdu;
|
|
ring->bds[ring->bd_wr_idx].seq_no = seq_no;
|
|
ring->bds[ring->bd_wr_idx].skb_linked = skb;
|
|
ring->bds[ring->bd_wr_idx].dma_mapping_addr = dma_mapping_addr;
|
|
|
|
ring->bd_wr_idx = ((ring->bd_wr_idx+1)&(NUM_TX_BD-1));
|
|
|
|
dma_async_issue_pending(priv->tx_chan);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return;
|
|
|
|
openwifi_tx_after_dma_mapping:
|
|
dma_unmap_single(priv->tx_chan->device->dev, dma_mapping_addr, num_dma_byte, DMA_MEM_TO_DEV);
|
|
|
|
openwifi_tx_early_out_after_lock:
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
report_pkt_loss_due_to_driver_drop(dev, skb);
|
|
// dev_kfree_skb(skb);
|
|
// printk("%s openwifi_tx: WARNING openwifi_tx_after_dma_mapping phy_tx_sn %d queue %d\n", sdr_compatible_str,priv->phy_tx_sn,queue_idx);
|
|
return;
|
|
|
|
openwifi_tx_early_out:
|
|
report_pkt_loss_due_to_driver_drop(dev, skb);
|
|
// dev_kfree_skb(skb);
|
|
// printk("%s openwifi_tx: WARNING openwifi_tx_early_out phy_tx_sn %d queue %d\n", sdr_compatible_str,priv->phy_tx_sn,queue_idx);
|
|
}
|
|
|
|
static int openwifi_set_antenna(struct ieee80211_hw *dev, u32 tx_ant, u32 rx_ant)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
u8 fpga_tx_ant_setting, target_rx_ant;
|
|
u32 atten_mdb_tx0, atten_mdb_tx1;
|
|
struct ctrl_outs_control ctrl_out;
|
|
int ret;
|
|
|
|
printk("%s openwifi_set_antenna: tx_ant%d rx_ant%d\n",sdr_compatible_str,tx_ant,rx_ant);
|
|
|
|
if (tx_ant >= 4 || tx_ant == 0) {
|
|
return -EINVAL;
|
|
} else if (rx_ant >= 3 || rx_ant == 0) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
fpga_tx_ant_setting = ((tx_ant<=2)?(tx_ant):(tx_ant+16));
|
|
target_rx_ant = ((rx_ant&1)?0:1);
|
|
|
|
// try rf chip setting firstly, only update internal state variable when rf chip succeed
|
|
atten_mdb_tx0 = ((tx_ant&1)?(AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT]):AD9361_RADIO_OFF_TX_ATT);
|
|
atten_mdb_tx1 = ((tx_ant&2)?(AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT]):AD9361_RADIO_OFF_TX_ATT);
|
|
ret = ad9361_set_tx_atten(priv->ad9361_phy, atten_mdb_tx0, true, false, true);
|
|
if (ret < 0) {
|
|
printk("%s openwifi_set_antenna: WARNING ad9361_set_tx_atten ant0 %d FAIL!\n",sdr_compatible_str, atten_mdb_tx0);
|
|
return -EINVAL;
|
|
} else {
|
|
printk("%s openwifi_set_antenna: ad9361_set_tx_atten ant0 %d OK\n",sdr_compatible_str, atten_mdb_tx0);
|
|
}
|
|
ret = ad9361_set_tx_atten(priv->ad9361_phy, atten_mdb_tx1, false, true, true);
|
|
if (ret < 0) {
|
|
printk("%s openwifi_set_antenna: WARNING ad9361_set_tx_atten ant1 %d FAIL!\n",sdr_compatible_str, atten_mdb_tx1);
|
|
return -EINVAL;
|
|
} else {
|
|
printk("%s openwifi_set_antenna: ad9361_set_tx_atten ant1 %d OK\n",sdr_compatible_str, atten_mdb_tx1);
|
|
}
|
|
|
|
ctrl_out.en_mask = priv->ctrl_out.en_mask;
|
|
ctrl_out.index = (target_rx_ant==0?AD9361_CTRL_OUT_INDEX_ANT0:AD9361_CTRL_OUT_INDEX_ANT1);
|
|
ret = ad9361_ctrl_outs_setup(priv->ad9361_phy, &(ctrl_out));
|
|
if (ret < 0) {
|
|
printk("%s openwifi_set_antenna: WARNING ad9361_ctrl_outs_setup en_mask 0x%02x index 0x%02x FAIL!\n",sdr_compatible_str, ctrl_out.en_mask, ctrl_out.index);
|
|
return -EINVAL;
|
|
} else {
|
|
printk("%s openwifi_set_antenna: ad9361_ctrl_outs_setup en_mask 0x%02x index 0x%02x\n",sdr_compatible_str, ctrl_out.en_mask, ctrl_out.index);
|
|
}
|
|
|
|
tx_intf_api->TX_INTF_REG_ANT_SEL_write(fpga_tx_ant_setting);
|
|
ret = tx_intf_api->TX_INTF_REG_ANT_SEL_read();
|
|
if (ret != fpga_tx_ant_setting) {
|
|
printk("%s openwifi_set_antenna: WARNING TX_INTF_REG_ANT_SEL_write target %d read back %d\n",sdr_compatible_str, fpga_tx_ant_setting, ret);
|
|
return -EINVAL;
|
|
} else {
|
|
printk("%s openwifi_set_antenna: TX_INTF_REG_ANT_SEL_write value %d\n",sdr_compatible_str, ret);
|
|
}
|
|
|
|
rx_intf_api->RX_INTF_REG_ANT_SEL_write(target_rx_ant);
|
|
ret = rx_intf_api->RX_INTF_REG_ANT_SEL_read();
|
|
if (ret != target_rx_ant) {
|
|
printk("%s openwifi_set_antenna: WARNING RX_INTF_REG_ANT_SEL_write target %d read back %d\n",sdr_compatible_str, target_rx_ant, ret);
|
|
return -EINVAL;
|
|
} else {
|
|
printk("%s openwifi_set_antenna: RX_INTF_REG_ANT_SEL_write value %d\n",sdr_compatible_str, ret);
|
|
}
|
|
|
|
// update internal state variable
|
|
priv->runtime_tx_ant_cfg = tx_ant;
|
|
priv->runtime_rx_ant_cfg = rx_ant;
|
|
|
|
if (TX_OFFSET_TUNING_ENABLE)
|
|
priv->tx_intf_cfg = ((tx_ant&1)?TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT0:TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT1);//NO USE
|
|
else {
|
|
if (tx_ant == 3)
|
|
priv->tx_intf_cfg = TX_INTF_BW_20MHZ_AT_0MHZ_ANT_BOTH;
|
|
else
|
|
priv->tx_intf_cfg = ((tx_ant&1)?TX_INTF_BW_20MHZ_AT_0MHZ_ANT0:TX_INTF_BW_20MHZ_AT_0MHZ_ANT1);
|
|
}
|
|
|
|
priv->rx_intf_cfg = (target_rx_ant==0?RX_INTF_BW_20MHZ_AT_0MHZ_ANT0:RX_INTF_BW_20MHZ_AT_0MHZ_ANT1);
|
|
priv->ctrl_out.index=ctrl_out.index;
|
|
|
|
priv->tx_freq_offset_to_lo_MHz = tx_intf_fo_mapping[priv->tx_intf_cfg];
|
|
priv->rx_freq_offset_to_lo_MHz = rx_intf_fo_mapping[priv->rx_intf_cfg];
|
|
|
|
return 0;
|
|
}
|
|
static int openwifi_get_antenna(struct ieee80211_hw *dev, u32 *tx_ant, u32 *rx_ant)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
|
|
*tx_ant = priv->runtime_tx_ant_cfg;
|
|
*rx_ant = priv->runtime_rx_ant_cfg;
|
|
|
|
printk("%s openwifi_get_antenna: tx_ant%d rx_ant%d\n",sdr_compatible_str, *tx_ant, *rx_ant);
|
|
|
|
printk("%s openwifi_get_antenna: drv tx cfg %d offset %d drv rx cfg %d offset %d drv ctrl_out sel %x\n",sdr_compatible_str,
|
|
priv->tx_intf_cfg, priv->tx_freq_offset_to_lo_MHz, priv->rx_intf_cfg, priv->rx_freq_offset_to_lo_MHz, priv->ctrl_out.index);
|
|
|
|
printk("%s openwifi_get_antenna: fpga tx sel %d rx sel %d\n", sdr_compatible_str,
|
|
tx_intf_api->TX_INTF_REG_ANT_SEL_read(), rx_intf_api->RX_INTF_REG_ANT_SEL_read());
|
|
|
|
printk("%s openwifi_get_antenna: rf tx att0 %d tx att1 %d ctrl_out sel %x\n", sdr_compatible_str,
|
|
ad9361_get_tx_atten(priv->ad9361_phy, 1), ad9361_get_tx_atten(priv->ad9361_phy, 2), ad9361_spi_read(priv->ad9361_phy->spi, REG_CTRL_OUTPUT_POINTER));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int openwifi_start(struct ieee80211_hw *dev)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
int ret, i;
|
|
u32 reg;
|
|
|
|
for (i=0; i<MAX_NUM_VIF; i++) {
|
|
priv->vif[i] = NULL;
|
|
}
|
|
|
|
// //keep software registers persistent between NIC down and up for multiple times
|
|
/*memset(priv->drv_tx_reg_val, 0, sizeof(priv->drv_tx_reg_val));
|
|
memset(priv->drv_rx_reg_val, 0, sizeof(priv->drv_rx_reg_val));
|
|
memset(priv->drv_xpu_reg_val, 0, sizeof(priv->drv_xpu_reg_val));
|
|
memset(priv->rf_reg_val,0,sizeof(priv->rf_reg_val));
|
|
priv->drv_xpu_reg_val[DRV_XPU_REG_IDX_GIT_REV] = GIT_REV;*/
|
|
|
|
//turn on radio
|
|
openwifi_set_antenna(dev, priv->runtime_tx_ant_cfg, priv->runtime_rx_ant_cfg);
|
|
reg = ad9361_get_tx_atten(priv->ad9361_phy, ((priv->runtime_tx_ant_cfg==1 || priv->runtime_tx_ant_cfg==3)?1:2));
|
|
if (reg == (AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT])) {
|
|
priv->rfkill_off = 1;// 0 off, 1 on
|
|
printk("%s openwifi_start: rfkill radio on\n",sdr_compatible_str);
|
|
}
|
|
else
|
|
printk("%s openwifi_start: WARNING rfkill radio on failed. tx att read %d require %d\n",sdr_compatible_str, reg, AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT]);
|
|
|
|
rx_intf_api->hw_init(priv->rx_intf_cfg,8,8);
|
|
tx_intf_api->hw_init(priv->tx_intf_cfg,8,8,priv->fpga_type);
|
|
openofdm_tx_api->hw_init(priv->openofdm_tx_cfg);
|
|
openofdm_rx_api->hw_init(priv->openofdm_rx_cfg);
|
|
xpu_api->hw_init(priv->xpu_cfg);
|
|
|
|
xpu_api->XPU_REG_MAC_ADDR_write(priv->mac_addr);
|
|
|
|
printk("%s openwifi_start: rx_intf_cfg %d openofdm_rx_cfg %d tx_intf_cfg %d openofdm_tx_cfg %d\n",sdr_compatible_str, priv->rx_intf_cfg, priv->openofdm_rx_cfg, priv->tx_intf_cfg, priv->openofdm_tx_cfg);
|
|
printk("%s openwifi_start: rx_freq_offset_to_lo_MHz %d tx_freq_offset_to_lo_MHz %d\n",sdr_compatible_str, priv->rx_freq_offset_to_lo_MHz, priv->tx_freq_offset_to_lo_MHz);
|
|
|
|
tx_intf_api->TX_INTF_REG_INTERRUPT_SEL_write(0x30004); //disable tx interrupt
|
|
rx_intf_api->RX_INTF_REG_INTERRUPT_TEST_write(0x100); // disable rx interrupt by interrupt test mode
|
|
rx_intf_api->RX_INTF_REG_M_AXIS_RST_write(1); // hold M AXIS in reset status
|
|
|
|
priv->rx_chan = dma_request_slave_channel(&(priv->pdev->dev), "rx_dma_s2mm");
|
|
if (IS_ERR(priv->rx_chan) || priv->rx_chan==NULL) {
|
|
ret = PTR_ERR(priv->rx_chan);
|
|
pr_err("%s openwifi_start: No Rx channel ret %d priv->rx_chan 0x%p\n",sdr_compatible_str, ret, priv->rx_chan);
|
|
goto err_dma;
|
|
}
|
|
|
|
priv->tx_chan = dma_request_slave_channel(&(priv->pdev->dev), "tx_dma_mm2s");
|
|
if (IS_ERR(priv->tx_chan) || priv->tx_chan==NULL) {
|
|
ret = PTR_ERR(priv->tx_chan);
|
|
pr_err("%s openwifi_start: No Tx channel ret %d priv->tx_chan 0x%p\n",sdr_compatible_str, ret, priv->tx_chan);
|
|
goto err_dma;
|
|
}
|
|
printk("%s openwifi_start: DMA channel setup successfully. priv->rx_chan 0x%p priv->tx_chan 0x%p\n",sdr_compatible_str, priv->rx_chan, priv->tx_chan);
|
|
|
|
ret = openwifi_init_rx_ring(priv);
|
|
if (ret) {
|
|
printk("%s openwifi_start: openwifi_init_rx_ring ret %d\n", sdr_compatible_str,ret);
|
|
goto err_free_rings;
|
|
}
|
|
|
|
priv->seqno=0;
|
|
for (i=0; i<MAX_NUM_SW_QUEUE; i++) {
|
|
if ((ret = openwifi_init_tx_ring(priv, i))) {
|
|
printk("%s openwifi_start: openwifi_init_tx_ring %d ret %d\n", sdr_compatible_str, i, ret);
|
|
goto err_free_rings;
|
|
}
|
|
}
|
|
|
|
if ( (ret = rx_dma_setup(dev)) ) {
|
|
printk("%s openwifi_start: rx_dma_setup ret %d\n", sdr_compatible_str,ret);
|
|
goto err_free_rings;
|
|
}
|
|
|
|
priv->irq_rx = irq_of_parse_and_map(priv->pdev->dev.of_node, 1);
|
|
ret = request_irq(priv->irq_rx, openwifi_rx_interrupt,
|
|
IRQF_SHARED, "sdr,rx_pkt_intr", dev);
|
|
if (ret) {
|
|
wiphy_err(dev->wiphy, "openwifi_start:failed to register IRQ handler openwifi_rx_interrupt\n");
|
|
goto err_free_rings;
|
|
} else {
|
|
printk("%s openwifi_start: irq_rx %d\n", sdr_compatible_str, priv->irq_rx);
|
|
}
|
|
|
|
priv->irq_tx = irq_of_parse_and_map(priv->pdev->dev.of_node, 3);
|
|
ret = request_irq(priv->irq_tx, openwifi_tx_interrupt,
|
|
IRQF_SHARED, "sdr,tx_itrpt", dev);
|
|
if (ret) {
|
|
wiphy_err(dev->wiphy, "openwifi_start: failed to register IRQ handler openwifi_tx_interrupt\n");
|
|
goto err_free_rings;
|
|
} else {
|
|
printk("%s openwifi_start: irq_tx %d\n", sdr_compatible_str, priv->irq_tx);
|
|
}
|
|
|
|
rx_intf_api->RX_INTF_REG_INTERRUPT_TEST_write(0x000); // enable rx interrupt get normal fcs valid pass through ddc to ARM
|
|
tx_intf_api->TX_INTF_REG_INTERRUPT_SEL_write(0x4); //enable tx interrupt
|
|
rx_intf_api->RX_INTF_REG_M_AXIS_RST_write(0); // release M AXIS
|
|
xpu_api->XPU_REG_TSF_LOAD_VAL_write(0,0); // reset tsf timer
|
|
|
|
// disable ad9361 auto calibration and enable openwifi fpga spi control
|
|
priv->ad9361_phy->state->auto_cal_en = false; // turn off auto Tx quadrature calib.
|
|
priv->ad9361_phy->state->manual_tx_quad_cal_en = true; // turn on manual Tx quadrature calib.
|
|
xpu_api->XPU_REG_SPI_DISABLE_write(0);
|
|
|
|
// normal_out:
|
|
printk("%s openwifi_start: normal end\n", sdr_compatible_str);
|
|
return 0;
|
|
|
|
err_free_rings:
|
|
openwifi_free_rx_ring(priv);
|
|
for (i=0; i<MAX_NUM_SW_QUEUE; i++)
|
|
openwifi_free_tx_ring(priv, i);
|
|
|
|
err_dma:
|
|
ret = -1;
|
|
printk("%s openwifi_start: abnormal end ret %d\n", sdr_compatible_str, ret);
|
|
return ret;
|
|
}
|
|
|
|
static void openwifi_stop(struct ieee80211_hw *dev)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
u32 reg, reg1;
|
|
int i;
|
|
|
|
// enable ad9361 auto calibration and disable openwifi fpga spi control
|
|
priv->ad9361_phy->state->auto_cal_en = true; // turn on auto Tx quadrature calib.
|
|
priv->ad9361_phy->state->manual_tx_quad_cal_en = false; // turn off manual Tx quadrature calib.
|
|
xpu_api->XPU_REG_SPI_DISABLE_write(1);
|
|
|
|
//turn off radio
|
|
#if 1
|
|
ad9361_tx_mute(priv->ad9361_phy, 1);
|
|
reg = ad9361_get_tx_atten(priv->ad9361_phy, 2);
|
|
reg1 = ad9361_get_tx_atten(priv->ad9361_phy, 1);
|
|
if (reg == AD9361_RADIO_OFF_TX_ATT && reg1 == AD9361_RADIO_OFF_TX_ATT ) {
|
|
priv->rfkill_off = 0;// 0 off, 1 on
|
|
printk("%s openwifi_stop: rfkill radio off\n",sdr_compatible_str);
|
|
}
|
|
else
|
|
printk("%s openwifi_stop: WARNING rfkill radio off failed. tx att read %d %d require %d\n",sdr_compatible_str, reg, reg1, AD9361_RADIO_OFF_TX_ATT);
|
|
#endif
|
|
|
|
//ieee80211_stop_queue(dev, 0);
|
|
tx_intf_api->TX_INTF_REG_INTERRUPT_SEL_write(0x30004); //disable tx interrupt
|
|
rx_intf_api->RX_INTF_REG_INTERRUPT_TEST_write(0x100); // disable fcs_valid by interrupt test mode
|
|
rx_intf_api->RX_INTF_REG_M_AXIS_RST_write(1); // hold M AXIS in reset status
|
|
|
|
for (i=0; i<MAX_NUM_VIF; i++) {
|
|
priv->vif[i] = NULL;
|
|
}
|
|
|
|
openwifi_free_rx_ring(priv);
|
|
for (i=0; i<MAX_NUM_SW_QUEUE; i++)
|
|
openwifi_free_tx_ring(priv, i);
|
|
|
|
pr_info("%s openwifi_stop: dropped channel %s\n", sdr_compatible_str, dma_chan_name(priv->rx_chan));
|
|
dmaengine_terminate_all(priv->rx_chan);
|
|
dma_release_channel(priv->rx_chan);
|
|
pr_info("%s openwifi_stop: dropped channel %s\n", sdr_compatible_str, dma_chan_name(priv->tx_chan));
|
|
dmaengine_terminate_all(priv->tx_chan);
|
|
dma_release_channel(priv->tx_chan);
|
|
|
|
//priv->rf->stop(dev);
|
|
|
|
free_irq(priv->irq_rx, dev);
|
|
free_irq(priv->irq_tx, dev);
|
|
|
|
// normal_out:
|
|
printk("%s openwifi_stop\n", sdr_compatible_str);
|
|
}
|
|
|
|
static u64 openwifi_get_tsf(struct ieee80211_hw *dev,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
u32 tsft_low, tsft_high;
|
|
|
|
tsft_low = xpu_api->XPU_REG_TSF_RUNTIME_VAL_LOW_read();
|
|
tsft_high = xpu_api->XPU_REG_TSF_RUNTIME_VAL_HIGH_read();
|
|
//printk("%s openwifi_get_tsf: %08x%08x\n", sdr_compatible_str,tsft_high,tsft_low);
|
|
return( ( (u64)tsft_low ) | ( ((u64)tsft_high)<<32 ) );
|
|
}
|
|
|
|
static void openwifi_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf)
|
|
{
|
|
u32 tsft_high = ((tsf >> 32)&0xffffffff);
|
|
u32 tsft_low = (tsf&0xffffffff);
|
|
xpu_api->XPU_REG_TSF_LOAD_VAL_write(tsft_high,tsft_low);
|
|
printk("%s openwifi_set_tsf: %08x%08x\n", sdr_compatible_str,tsft_high,tsft_low);
|
|
}
|
|
|
|
static void openwifi_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
|
|
{
|
|
xpu_api->XPU_REG_TSF_LOAD_VAL_write(0,0);
|
|
printk("%s openwifi_reset_tsf\n", sdr_compatible_str);
|
|
}
|
|
|
|
static int openwifi_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
|
|
{
|
|
printk("%s openwifi_set_rts_threshold WARNING value %d\n", sdr_compatible_str,value);
|
|
return(0);
|
|
}
|
|
|
|
static void openwifi_beacon_work(struct work_struct *work)
|
|
{
|
|
struct openwifi_vif *vif_priv =
|
|
container_of(work, struct openwifi_vif, beacon_work.work);
|
|
struct ieee80211_vif *vif =
|
|
container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
|
|
struct ieee80211_hw *dev = vif_priv->dev;
|
|
struct ieee80211_mgmt *mgmt;
|
|
struct sk_buff *skb;
|
|
|
|
/* don't overflow the tx ring */
|
|
if (ieee80211_queue_stopped(dev, 0))
|
|
goto resched;
|
|
|
|
/* grab a fresh beacon */
|
|
skb = ieee80211_beacon_get(dev, vif);
|
|
if (!skb)
|
|
goto resched;
|
|
|
|
/*
|
|
* update beacon timestamp w/ TSF value
|
|
* TODO: make hardware update beacon timestamp
|
|
*/
|
|
mgmt = (struct ieee80211_mgmt *)skb->data;
|
|
mgmt->u.beacon.timestamp = cpu_to_le64(openwifi_get_tsf(dev, vif));
|
|
|
|
/* TODO: use actual beacon queue */
|
|
skb_set_queue_mapping(skb, 0);
|
|
openwifi_tx(dev, NULL, skb);
|
|
|
|
resched:
|
|
/*
|
|
* schedule next beacon
|
|
* TODO: use hardware support for beacon timing
|
|
*/
|
|
schedule_delayed_work(&vif_priv->beacon_work, usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
|
|
// printk("%s openwifi_beacon_work beacon_int %d\n", sdr_compatible_str, vif->bss_conf.beacon_int);
|
|
}
|
|
|
|
static int openwifi_add_interface(struct ieee80211_hw *dev,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
int i;
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct openwifi_vif *vif_priv;
|
|
|
|
switch (vif->type) {
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_MONITOR:
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
// let's support more than 1 interface
|
|
for (i=0; i<MAX_NUM_VIF; i++) {
|
|
if (priv->vif[i] == NULL)
|
|
break;
|
|
}
|
|
|
|
printk("%s openwifi_add_interface start. vif for loop result %d\n", sdr_compatible_str, i);
|
|
|
|
if (i==MAX_NUM_VIF)
|
|
return -EBUSY;
|
|
|
|
priv->vif[i] = vif;
|
|
|
|
/* Initialize driver private area */
|
|
vif_priv = (struct openwifi_vif *)&vif->drv_priv;
|
|
vif_priv->idx = i;
|
|
|
|
vif_priv->dev = dev;
|
|
INIT_DELAYED_WORK(&vif_priv->beacon_work, openwifi_beacon_work);
|
|
vif_priv->enable_beacon = false;
|
|
|
|
priv->mac_addr[0] = vif->addr[0];
|
|
priv->mac_addr[1] = vif->addr[1];
|
|
priv->mac_addr[2] = vif->addr[2];
|
|
priv->mac_addr[3] = vif->addr[3];
|
|
priv->mac_addr[4] = vif->addr[4];
|
|
priv->mac_addr[5] = vif->addr[5];
|
|
xpu_api->XPU_REG_MAC_ADDR_write(priv->mac_addr); // set mac addr in fpga
|
|
|
|
printk("%s openwifi_add_interface end with vif idx %d addr %02x:%02x:%02x:%02x:%02x:%02x\n", sdr_compatible_str,vif_priv->idx,
|
|
vif->addr[0],vif->addr[1],vif->addr[2],vif->addr[3],vif->addr[4],vif->addr[5]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void openwifi_remove_interface(struct ieee80211_hw *dev,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct openwifi_vif *vif_priv;
|
|
struct openwifi_priv *priv = dev->priv;
|
|
|
|
vif_priv = (struct openwifi_vif *)&vif->drv_priv;
|
|
priv->vif[vif_priv->idx] = NULL;
|
|
printk("%s openwifi_remove_interface vif idx %d\n", sdr_compatible_str, vif_priv->idx);
|
|
}
|
|
|
|
static int openwifi_config(struct ieee80211_hw *dev, u32 changed)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct ieee80211_conf *conf = &dev->conf;
|
|
|
|
if (changed & IEEE80211_CONF_CHANGE_CHANNEL)
|
|
priv->rf->set_chan(dev, conf);
|
|
else
|
|
printk("%s openwifi_config changed flag %08x\n", sdr_compatible_str, changed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void openwifi_bss_info_changed(struct ieee80211_hw *dev,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *info,
|
|
u32 changed)
|
|
{
|
|
struct openwifi_priv *priv = dev->priv;
|
|
struct openwifi_vif *vif_priv;
|
|
u32 bssid_low, bssid_high;
|
|
|
|
vif_priv = (struct openwifi_vif *)&vif->drv_priv;
|
|
|
|
//be careful: we don have valid chip, so registers addresses in priv->map->BSSID[0] are not valid! should not print it!
|
|
//printk("%s openwifi_bss_info_changed map bssid %02x%02x%02x%02x%02x%02x\n",sdr_compatible_str,priv->map->BSSID[0],priv->map->BSSID[1],priv->map->BSSID[2],priv->map->BSSID[3],priv->map->BSSID[4],priv->map->BSSID[5]);
|
|
if (changed & BSS_CHANGED_BSSID) {
|
|
printk("%s openwifi_bss_info_changed BSS_CHANGED_BSSID %02x%02x%02x%02x%02x%02x\n",sdr_compatible_str,info->bssid[0],info->bssid[1],info->bssid[2],info->bssid[3],info->bssid[4],info->bssid[5]);
|
|
// write new bssid to our HW, and do not change bssid filter
|
|
//u32 bssid_filter_high = xpu_api->XPU_REG_BSSID_FILTER_HIGH_read();
|
|
bssid_low = ( *( (u32*)(info->bssid) ) );
|
|
bssid_high = ( *( (u16*)(info->bssid+4) ) );
|
|
|
|
//bssid_filter_high = (bssid_filter_high&0x80000000);
|
|
//bssid_high = (bssid_high|bssid_filter_high);
|
|
xpu_api->XPU_REG_BSSID_FILTER_LOW_write(bssid_low);
|
|
xpu_api->XPU_REG_BSSID_FILTER_HIGH_write(bssid_high);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BEACON_INT) {
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_BEACON_INT %x\n",sdr_compatible_str,info->beacon_int);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_TXPOWER)
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_TXPOWER %x\n",sdr_compatible_str,info->txpower);
|
|
|
|
if (changed & BSS_CHANGED_ERP_CTS_PROT)
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_ERP_CTS_PROT %x\n",sdr_compatible_str,info->use_cts_prot);
|
|
|
|
if (changed & BSS_CHANGED_BASIC_RATES)
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_BASIC_RATES %x\n",sdr_compatible_str,info->basic_rates);
|
|
|
|
if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) {
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_ERP_SLOT %d BSS_CHANGED_ERP_PREAMBLE %d short slot %d\n",sdr_compatible_str,
|
|
changed&BSS_CHANGED_ERP_SLOT,changed&BSS_CHANGED_ERP_PREAMBLE,info->use_short_slot);
|
|
if (info->use_short_slot && priv->use_short_slot==false) {
|
|
priv->use_short_slot=true;
|
|
xpu_api->XPU_REG_BAND_CHANNEL_write( (priv->use_short_slot<<24)|(priv->band<<16) );
|
|
} else if ((!info->use_short_slot) && priv->use_short_slot==true) {
|
|
priv->use_short_slot=false;
|
|
xpu_api->XPU_REG_BAND_CHANNEL_write( (priv->use_short_slot<<24)|(priv->band<<16) );
|
|
}
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BEACON_ENABLED) {
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_BEACON_ENABLED\n",sdr_compatible_str);
|
|
vif_priv->enable_beacon = info->enable_beacon;
|
|
}
|
|
|
|
if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
|
|
cancel_delayed_work_sync(&vif_priv->beacon_work);
|
|
if (vif_priv->enable_beacon) {
|
|
schedule_work(&vif_priv->beacon_work.work);
|
|
printk("%s openwifi_bss_info_changed WARNING enable_beacon\n",sdr_compatible_str);
|
|
}
|
|
printk("%s openwifi_bss_info_changed WARNING BSS_CHANGED_BEACON_ENABLED %d BSS_CHANGED_BEACON %d\n",sdr_compatible_str,
|
|
changed&BSS_CHANGED_BEACON_ENABLED,changed&BSS_CHANGED_BEACON);
|
|
}
|
|
}
|
|
// helper function
|
|
u32 log2val(u32 val){
|
|
u32 ret_val = 0 ;
|
|
while(val>1){
|
|
val = val >> 1 ;
|
|
ret_val ++ ;
|
|
}
|
|
return ret_val ;
|
|
}
|
|
|
|
static int openwifi_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
|
|
const struct ieee80211_tx_queue_params *params)
|
|
{
|
|
u32 reg_val, cw_min_exp, cw_max_exp;
|
|
|
|
printk("%s openwifi_conf_tx: [queue %d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d, aifs and txop ignored\n",
|
|
sdr_compatible_str,queue,params->aifs,params->cw_min,params->cw_max,params->txop);
|
|
|
|
reg_val=xpu_api->XPU_REG_CSMA_CFG_read();
|
|
cw_min_exp = (log2val(params->cw_min + 1) & 0x0F);
|
|
cw_max_exp = (log2val(params->cw_max + 1) & 0x0F);
|
|
switch(queue){
|
|
case 0: reg_val = ( (reg_val & 0xFFFFFF00) | ((cw_min_exp | (cw_max_exp << 4)) << 0) ); break;
|
|
case 1: reg_val = ( (reg_val & 0xFFFF00FF) | ((cw_min_exp | (cw_max_exp << 4)) << 8) ); break;
|
|
case 2: reg_val = ( (reg_val & 0xFF00FFFF) | ((cw_min_exp | (cw_max_exp << 4)) << 16) ); break;
|
|
case 3: reg_val = ( (reg_val & 0x00FFFFFF) | ((cw_min_exp | (cw_max_exp << 4)) << 24) ); break;
|
|
default: printk("%s openwifi_conf_tx: WARNING queue %d does not exist",sdr_compatible_str, queue); return(0);
|
|
}
|
|
xpu_api->XPU_REG_CSMA_CFG_write(reg_val);
|
|
return(0);
|
|
}
|
|
|
|
static u64 openwifi_prepare_multicast(struct ieee80211_hw *dev,
|
|
struct netdev_hw_addr_list *mc_list)
|
|
{
|
|
printk("%s openwifi_prepare_multicast\n", sdr_compatible_str);
|
|
return netdev_hw_addr_list_count(mc_list);
|
|
}
|
|
|
|
static void openwifi_configure_filter(struct ieee80211_hw *dev,
|
|
unsigned int changed_flags,
|
|
unsigned int *total_flags,
|
|
u64 multicast)
|
|
{
|
|
u32 filter_flag;
|
|
|
|
(*total_flags) &= SDR_SUPPORTED_FILTERS;
|
|
(*total_flags) |= FIF_ALLMULTI; //because we need to pass all multicast (no matter it is for us or not) to upper layer
|
|
|
|
filter_flag = (*total_flags);
|
|
|
|
filter_flag = (filter_flag|UNICAST_FOR_US|BROADCAST_ALL_ONE|BROADCAST_ALL_ZERO);
|
|
//filter_flag = (filter_flag|UNICAST_FOR_US|BROADCAST_ALL_ONE|BROADCAST_ALL_ZERO|MONITOR_ALL); // all pkt will be delivered to arm
|
|
|
|
//if (priv->vif[0]->type == NL80211_IFTYPE_MONITOR)
|
|
if ((filter_flag&0xf0) == 0xf0) //FIF_BCN_PRBRESP_PROMISC/FIF_CONTROL/FIF_OTHER_BSS/FIF_PSPOLL are set means monitor mode
|
|
filter_flag = (filter_flag|MONITOR_ALL);
|
|
else
|
|
filter_flag = (filter_flag&(~MONITOR_ALL));
|
|
|
|
if ( !(filter_flag&FIF_BCN_PRBRESP_PROMISC) )
|
|
filter_flag = (filter_flag|MY_BEACON);
|
|
|
|
filter_flag = (filter_flag|FIF_PSPOLL);
|
|
|
|
xpu_api->XPU_REG_FILTER_FLAG_write(filter_flag|HIGH_PRIORITY_DISCARD_FLAG);
|
|
//xpu_api->XPU_REG_FILTER_FLAG_write(filter_flag); //do not discard any pkt
|
|
|
|
printk("%s openwifi_configure_filter MON %d M_BCN %d BST0 %d BST1 %d UST %d PB_RQ %d PS_PL %d O_BSS %d CTL %d BCN_PRP %d PCP_FL %d FCS_FL %d ALL_MUT %d\n", sdr_compatible_str,
|
|
(filter_flag>>13)&1,(filter_flag>>12)&1,(filter_flag>>11)&1,(filter_flag>>10)&1,(filter_flag>>9)&1,(filter_flag>>8)&1,(filter_flag>>7)&1,(filter_flag>>6)&1,(filter_flag>>5)&1,(filter_flag>>4)&1,(filter_flag>>3)&1,(filter_flag>>2)&1,(filter_flag>>1)&1);
|
|
}
|
|
|
|
static int openwifi_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_ampdu_params *params)
|
|
{
|
|
struct ieee80211_sta *sta = params->sta;
|
|
enum ieee80211_ampdu_mlme_action action = params->action;
|
|
// struct openwifi_priv *priv = hw->priv;
|
|
u16 max_tx_bytes, buf_size;
|
|
u32 ampdu_action_config;
|
|
|
|
if (!AGGR_ENABLE) {
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
switch (action)
|
|
{
|
|
case IEEE80211_AMPDU_TX_START:
|
|
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, params->tid);
|
|
printk("%s openwifi_ampdu_action: start TX aggregation. tid %d\n", sdr_compatible_str, params->tid);
|
|
break;
|
|
case IEEE80211_AMPDU_TX_STOP_CONT:
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH:
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
|
|
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, params->tid);
|
|
printk("%s openwifi_ampdu_action: stop TX aggregation. tid %d\n", sdr_compatible_str, params->tid);
|
|
break;
|
|
case IEEE80211_AMPDU_TX_OPERATIONAL:
|
|
buf_size = 4;
|
|
// buf_size = (params->buf_size) - 1;
|
|
max_tx_bytes = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor)) - 1;
|
|
ampdu_action_config = ( sta->ht_cap.ampdu_density<<24 | buf_size<<16 | max_tx_bytes );
|
|
tx_intf_api->TX_INTF_REG_AMPDU_ACTION_CONFIG_write(ampdu_action_config);
|
|
printk("%s openwifi_ampdu_action: TX operational. tid %d max_tx_bytes %d ampdu_density %d buf_size %d\n",
|
|
sdr_compatible_str, params->tid, max_tx_bytes, sta->ht_cap.ampdu_density, buf_size);
|
|
break;
|
|
case IEEE80211_AMPDU_RX_START:
|
|
printk("%s openwifi_ampdu_action: start RX aggregation. tid %d\n", sdr_compatible_str, params->tid);
|
|
break;
|
|
case IEEE80211_AMPDU_RX_STOP:
|
|
printk("%s openwifi_ampdu_action: stop RX aggregation. tid %d\n", sdr_compatible_str, params->tid);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ieee80211_ops openwifi_ops = {
|
|
.tx = openwifi_tx,
|
|
.start = openwifi_start,
|
|
.stop = openwifi_stop,
|
|
.add_interface = openwifi_add_interface,
|
|
.remove_interface = openwifi_remove_interface,
|
|
.config = openwifi_config,
|
|
.set_antenna = openwifi_set_antenna,
|
|
.get_antenna = openwifi_get_antenna,
|
|
.bss_info_changed = openwifi_bss_info_changed,
|
|
.conf_tx = openwifi_conf_tx,
|
|
.prepare_multicast = openwifi_prepare_multicast,
|
|
.configure_filter = openwifi_configure_filter,
|
|
.rfkill_poll = openwifi_rfkill_poll,
|
|
.get_tsf = openwifi_get_tsf,
|
|
.set_tsf = openwifi_set_tsf,
|
|
.reset_tsf = openwifi_reset_tsf,
|
|
.set_rts_threshold = openwifi_set_rts_threshold,
|
|
.ampdu_action = openwifi_ampdu_action,
|
|
.testmode_cmd = openwifi_testmode_cmd,
|
|
};
|
|
|
|
static const struct of_device_id openwifi_dev_of_ids[] = {
|
|
{ .compatible = "sdr,sdr", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, openwifi_dev_of_ids);
|
|
|
|
static int custom_match_spi_dev(struct device *dev, void *data)
|
|
{
|
|
const char *name = data;
|
|
|
|
bool ret = sysfs_streq(name, dev->of_node->name);
|
|
printk("%s custom_match_spi_dev %s %s %d\n", sdr_compatible_str,name, dev->of_node->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int custom_match_platform_dev(struct device *dev, void *data)
|
|
{
|
|
struct platform_device *plat_dev = to_platform_device(dev);
|
|
const char *name = data;
|
|
char *name_in_sys_bus_platform_devices = strstr(plat_dev->name, name);
|
|
bool match_flag = (name_in_sys_bus_platform_devices != NULL);
|
|
|
|
if (match_flag) {
|
|
printk("%s custom_match_platform_dev %s\n", sdr_compatible_str,plat_dev->name);
|
|
}
|
|
return(match_flag);
|
|
}
|
|
|
|
static int openwifi_dev_probe(struct platform_device *pdev)
|
|
{
|
|
struct ieee80211_hw *dev;
|
|
struct openwifi_priv *priv;
|
|
int err=1, rand_val;
|
|
const char *chip_name, *fpga_model;
|
|
u32 reg, i;//, reg1;
|
|
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
struct device *tmp_dev;
|
|
struct platform_device *tmp_pdev;
|
|
struct iio_dev *tmp_indio_dev;
|
|
// struct gpio_leds_priv *tmp_led_priv;
|
|
|
|
printk("\n");
|
|
|
|
if (np) {
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(openwifi_dev_of_ids, np);
|
|
if (match) {
|
|
printk("%s openwifi_dev_probe: match!\n", sdr_compatible_str);
|
|
err = 0;
|
|
}
|
|
}
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
dev = ieee80211_alloc_hw(sizeof(*priv), &openwifi_ops);
|
|
if (!dev) {
|
|
printk(KERN_ERR "%s openwifi_dev_probe: ieee80211 alloc failed\n",sdr_compatible_str);
|
|
err = -ENOMEM;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
priv = dev->priv;
|
|
priv->pdev = pdev;
|
|
|
|
err = of_property_read_string(of_find_node_by_path("/"), "model", &fpga_model);
|
|
if(err < 0) {
|
|
printk("%s openwifi_dev_probe: WARNING unknown openwifi FPGA model %d\n",sdr_compatible_str, err);
|
|
priv->fpga_type = SMALL_FPGA;
|
|
} else {
|
|
// LARGE FPGAs (i.e. ZCU102, Z7035, ZC706)
|
|
if(strstr(fpga_model, "ZCU102") != NULL || strstr(fpga_model, "Z7035") != NULL || strstr(fpga_model, "ZC706") != NULL)
|
|
priv->fpga_type = LARGE_FPGA;
|
|
// SMALL FPGA: (i.e. ZED, ZC702, Z7020)
|
|
else if(strstr(fpga_model, "ZED") != NULL || strstr(fpga_model, "ZC702") != NULL || strstr(fpga_model, "Z7020") != NULL)
|
|
priv->fpga_type = SMALL_FPGA;
|
|
}
|
|
|
|
// //-------------find ad9361-phy driver for lo/channel control---------------
|
|
priv->actual_rx_lo = 1000; //Some value aligned with rf_init/rf_init_11n.sh that is not WiFi channel to force ad9361_rf_set_channel execution triggered by Linux
|
|
priv->actual_tx_lo = 1000; //Some value aligned with rf_init/rf_init_11n.sh that is not WiFi channel to force ad9361_rf_set_channel execution triggered by Linux
|
|
priv->last_tx_quad_cal_lo = 1000;
|
|
tmp_dev = bus_find_device( &spi_bus_type, NULL, "ad9361-phy", custom_match_spi_dev );
|
|
if (tmp_dev == NULL) {
|
|
printk(KERN_ERR "%s find_dev ad9361-phy failed\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
printk("%s bus_find_device ad9361-phy: %s. driver_data pointer %p\n", sdr_compatible_str, ((struct spi_device*)tmp_dev)->modalias, (void*)(((struct spi_device*)tmp_dev)->dev.driver_data));
|
|
if (((struct spi_device*)tmp_dev)->dev.driver_data == NULL) {
|
|
printk(KERN_ERR "%s find_dev ad9361-phy failed. dev.driver_data == NULL\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
priv->ad9361_phy = ad9361_spi_to_phy((struct spi_device*)tmp_dev);
|
|
if (!(priv->ad9361_phy)) {
|
|
printk(KERN_ERR "%s ad9361_spi_to_phy failed\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
printk("%s ad9361_spi_to_phy ad9361-phy: %s\n", sdr_compatible_str, priv->ad9361_phy->spi->modalias);
|
|
|
|
// //-------------find driver: axi_ad9361 hdl ref design module, dac channel---------------
|
|
tmp_dev = bus_find_device( &platform_bus_type, NULL, "cf-ad9361-dds-core-lpc", custom_match_platform_dev );
|
|
if (!tmp_dev) {
|
|
printk(KERN_ERR "%s bus_find_device platform_bus_type cf-ad9361-dds-core-lpc failed\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
tmp_pdev = to_platform_device(tmp_dev);
|
|
if (!tmp_pdev) {
|
|
printk(KERN_ERR "%s to_platform_device failed\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
tmp_indio_dev = platform_get_drvdata(tmp_pdev);
|
|
if (!tmp_indio_dev) {
|
|
printk(KERN_ERR "%s platform_get_drvdata failed\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
priv->dds_st = iio_priv(tmp_indio_dev);
|
|
if (!(priv->dds_st)) {
|
|
printk(KERN_ERR "%s iio_priv failed\n",sdr_compatible_str);
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
printk("%s openwifi_dev_probe: cf-ad9361-dds-core-lpc dds_st->version %08x chip_info->name %s\n",sdr_compatible_str,priv->dds_st->version,priv->dds_st->chip_info->name);
|
|
cf_axi_dds_datasel(priv->dds_st, -1, DATA_SEL_DMA);
|
|
printk("%s openwifi_dev_probe: cf_axi_dds_datasel DATA_SEL_DMA\n",sdr_compatible_str);
|
|
|
|
// //-------------find driver: axi_ad9361 hdl ref design module, adc channel---------------
|
|
// turn off radio by muting tx
|
|
// ad9361_tx_mute(priv->ad9361_phy, 1);
|
|
// reg = ad9361_get_tx_atten(priv->ad9361_phy, 2);
|
|
// reg1 = ad9361_get_tx_atten(priv->ad9361_phy, 1);
|
|
// if (reg == AD9361_RADIO_OFF_TX_ATT && reg1 == AD9361_RADIO_OFF_TX_ATT ) {
|
|
// priv->rfkill_off = 0;// 0 off, 1 on
|
|
// printk("%s openwifi_dev_probe: rfkill radio off\n",sdr_compatible_str);
|
|
// }
|
|
// else
|
|
// printk("%s openwifi_dev_probe: WARNING rfkill radio off failed. tx att read %d %d require %d\n",sdr_compatible_str, reg, reg1, AD9361_RADIO_OFF_TX_ATT);
|
|
|
|
// //-----------------------------parse the test_mode input--------------------------------
|
|
if (test_mode&1)
|
|
AGGR_ENABLE = true;
|
|
|
|
// if (test_mode&2)
|
|
// TX_OFFSET_TUNING_ENABLE = false;
|
|
|
|
priv->rssi_correction = rssi_correction_lookup_table(5220);//5220MHz. this will be set in real-time by _rf_set_channel()
|
|
priv->last_auto_fpga_lbt_th = rssi_dbm_to_rssi_half_db(-78, priv->rssi_correction);//-78dBm. a magic value. just to avoid uninitialized
|
|
|
|
//priv->rf_bw = 20000000; // Signal quality issue! NOT use for now. 20MHz or 40MHz. 40MHz need ddc/duc. 20MHz works in bypass mode
|
|
priv->rf_bw = 40000000; // 20MHz or 40MHz. 40MHz need ddc/duc. 20MHz works in bypass mode
|
|
|
|
priv->xpu_cfg = XPU_NORMAL;
|
|
|
|
priv->openofdm_tx_cfg = OPENOFDM_TX_NORMAL;
|
|
priv->openofdm_rx_cfg = OPENOFDM_RX_NORMAL;
|
|
|
|
printk("%s openwifi_dev_probe: priv->rf_bw == %dHz. bool for 20000000 %d, 40000000 %d\n",sdr_compatible_str, priv->rf_bw, (priv->rf_bw==20000000) , (priv->rf_bw==40000000) );
|
|
if (priv->rf_bw == 20000000) { //DO NOT USE. Not used for long time.
|
|
priv->rx_intf_cfg = RX_INTF_BYPASS;
|
|
priv->tx_intf_cfg = TX_INTF_BYPASS;
|
|
//priv->rx_freq_offset_to_lo_MHz = 0;
|
|
//priv->tx_freq_offset_to_lo_MHz = 0;
|
|
} else if (priv->rf_bw == 40000000) {
|
|
//priv->rx_intf_cfg = RX_INTF_BW_20MHZ_AT_P_10MHZ; //work
|
|
//priv->tx_intf_cfg = TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT1; //work
|
|
|
|
// // test ddc at central, duc at central+10M. It works. And also change rx BW from 40MHz to 20MHz in rf_init.sh. Rx sampling rate is still 40Msps
|
|
priv->rx_intf_cfg = RX_INTF_BW_20MHZ_AT_0MHZ_ANT0;
|
|
if (TX_OFFSET_TUNING_ENABLE)
|
|
priv->tx_intf_cfg = TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT0; // Let's use rx0 tx0 as default mode, because it works for both 9361 and 9364
|
|
else
|
|
priv->tx_intf_cfg = TX_INTF_BW_20MHZ_AT_0MHZ_ANT0;
|
|
// // try another antenna option
|
|
//priv->rx_intf_cfg = RX_INTF_BW_20MHZ_AT_0MHZ_ANT1;
|
|
//priv->tx_intf_cfg = TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT0;
|
|
|
|
#if 0
|
|
if (priv->rx_intf_cfg == DDC_BW_20MHZ_AT_N_10MHZ) {
|
|
priv->rx_freq_offset_to_lo_MHz = -10;
|
|
} else if (priv->rx_intf_cfg == DDC_BW_20MHZ_AT_P_10MHZ) {
|
|
priv->rx_freq_offset_to_lo_MHz = 10;
|
|
} else if (priv->rx_intf_cfg == DDC_BW_20MHZ_AT_0MHZ) {
|
|
priv->rx_freq_offset_to_lo_MHz = 0;
|
|
} else {
|
|
printk("%s openwifi_dev_probe: Warning! priv->rx_intf_cfg == %d\n",sdr_compatible_str,priv->rx_intf_cfg);
|
|
}
|
|
#endif
|
|
} else {
|
|
printk("%s openwifi_dev_probe: Warning! priv->rf_bw == %dHz (should be 20000000 or 40000000)\n",sdr_compatible_str, priv->rf_bw);
|
|
err = -EBADRQC;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
printk("%s openwifi_dev_probe: test_mode %d AGGR_ENABLE %d TX_OFFSET_TUNING_ENABLE %d init_tx_att %d\n", sdr_compatible_str, test_mode, AGGR_ENABLE, TX_OFFSET_TUNING_ENABLE, init_tx_att);
|
|
|
|
priv->runtime_tx_ant_cfg = ((priv->tx_intf_cfg==TX_INTF_BW_20MHZ_AT_0MHZ_ANT0 || priv->tx_intf_cfg==TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT0)?1:(priv->tx_intf_cfg==TX_INTF_BW_20MHZ_AT_0MHZ_ANT_BOTH?3:2));
|
|
priv->runtime_rx_ant_cfg = (priv->rx_intf_cfg==RX_INTF_BW_20MHZ_AT_0MHZ_ANT0?1:2);
|
|
|
|
priv->ctrl_out.en_mask=AD9361_CTRL_OUT_EN_MASK;
|
|
priv->ctrl_out.index =(priv->rx_intf_cfg==RX_INTF_BW_20MHZ_AT_0MHZ_ANT0?AD9361_CTRL_OUT_INDEX_ANT0:AD9361_CTRL_OUT_INDEX_ANT1);
|
|
|
|
memset(priv->drv_rx_reg_val,0,sizeof(priv->drv_rx_reg_val));
|
|
memset(priv->drv_tx_reg_val,0,sizeof(priv->drv_tx_reg_val));
|
|
memset(priv->drv_xpu_reg_val,0,sizeof(priv->drv_xpu_reg_val));
|
|
memset(priv->rf_reg_val,0,sizeof(priv->rf_reg_val));
|
|
|
|
priv->rf_reg_val[RF_TX_REG_IDX_ATT] = init_tx_att;
|
|
|
|
//let's by default turn radio on when probing
|
|
err = openwifi_set_antenna(dev, priv->runtime_tx_ant_cfg, priv->runtime_rx_ant_cfg);
|
|
if (err) {
|
|
printk("%s openwifi_dev_probe: WARNING openwifi_set_antenna FAIL %d\n",sdr_compatible_str, err);
|
|
err = -EIO;
|
|
goto err_free_dev;
|
|
}
|
|
reg = ad9361_spi_read(priv->ad9361_phy->spi, REG_CTRL_OUTPUT_POINTER);
|
|
printk("%s openwifi_dev_probe: ad9361_spi_read REG_CTRL_OUTPUT_POINTER 0x%02x\n",sdr_compatible_str, reg);
|
|
reg = ad9361_spi_read(priv->ad9361_phy->spi, REG_CTRL_OUTPUT_ENABLE);
|
|
printk("%s openwifi_dev_probe: ad9361_spi_read REG_CTRL_OUTPUT_ENABLE 0x%02x\n",sdr_compatible_str, reg);
|
|
|
|
reg = ad9361_get_tx_atten(priv->ad9361_phy, ((priv->runtime_tx_ant_cfg==1 || priv->runtime_tx_ant_cfg==3)?1:2));
|
|
if (reg == (AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT])) {
|
|
priv->rfkill_off = 1;// 0 off, 1 on
|
|
printk("%s openwifi_dev_probe: rfkill radio on\n",sdr_compatible_str);
|
|
} else
|
|
printk("%s openwifi_dev_probe: WARNING rfkill radio on failed. tx att read %d require %d\n",sdr_compatible_str, reg, AD9361_RADIO_ON_TX_ATT+priv->rf_reg_val[RF_TX_REG_IDX_ATT]);
|
|
|
|
priv->drv_xpu_reg_val[DRV_XPU_REG_IDX_GIT_REV] = GIT_REV;
|
|
|
|
// //set ad9361 in certain mode
|
|
#if 0
|
|
err = ad9361_set_trx_clock_chain_freq(priv->ad9361_phy,priv->rf_bw);
|
|
printk("%s openwifi_dev_probe: ad9361_set_trx_clock_chain_freq %dHz err %d\n",sdr_compatible_str, priv->rf_bw,err);
|
|
err = ad9361_update_rf_bandwidth(priv->ad9361_phy,priv->rf_bw,priv->rf_bw);
|
|
printk("%s openwifi_dev_probe: ad9361_update_rf_bandwidth %dHz err %d\n",sdr_compatible_str, priv->rf_bw,err);
|
|
|
|
rx_intf_api->hw_init(priv->rx_intf_cfg,8,8);
|
|
tx_intf_api->hw_init(priv->tx_intf_cfg,8,8,priv->fpga_type);
|
|
openofdm_tx_api->hw_init(priv->openofdm_tx_cfg);
|
|
openofdm_rx_api->hw_init(priv->openofdm_rx_cfg);
|
|
printk("%s openwifi_dev_probe: rx_intf_cfg %d openofdm_rx_cfg %d tx_intf_cfg %d openofdm_tx_cfg %d\n",sdr_compatible_str, priv->rx_intf_cfg, priv->openofdm_rx_cfg, priv->tx_intf_cfg, priv->openofdm_tx_cfg);
|
|
printk("%s openwifi_dev_probe: rx_freq_offset_to_lo_MHz %d tx_freq_offset_to_lo_MHz %d\n",sdr_compatible_str, priv->rx_freq_offset_to_lo_MHz, priv->tx_freq_offset_to_lo_MHz);
|
|
#endif
|
|
|
|
dev->max_rates = 1; //maximum number of alternate rate retry stages the hw can handle.
|
|
|
|
SET_IEEE80211_DEV(dev, &pdev->dev);
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
BUILD_BUG_ON(sizeof(priv->rates_2GHz) != sizeof(openwifi_2GHz_rates));
|
|
BUILD_BUG_ON(sizeof(priv->rates_5GHz) != sizeof(openwifi_5GHz_rates));
|
|
BUILD_BUG_ON(sizeof(priv->channels_2GHz) != sizeof(openwifi_2GHz_channels));
|
|
BUILD_BUG_ON(sizeof(priv->channels_5GHz) != sizeof(openwifi_5GHz_channels));
|
|
|
|
memcpy(priv->rates_2GHz, openwifi_2GHz_rates, sizeof(openwifi_2GHz_rates));
|
|
memcpy(priv->rates_5GHz, openwifi_5GHz_rates, sizeof(openwifi_5GHz_rates));
|
|
memcpy(priv->channels_2GHz, openwifi_2GHz_channels, sizeof(openwifi_2GHz_channels));
|
|
memcpy(priv->channels_5GHz, openwifi_5GHz_channels, sizeof(openwifi_5GHz_channels));
|
|
|
|
priv->band = BAND_5_8GHZ; //this can be changed by band _rf_set_channel() (2.4GHz ERP(OFDM)) (5GHz OFDM)
|
|
priv->channel = 44; //currently useless. this can be changed by band _rf_set_channel()
|
|
priv->use_short_slot = false; //this can be changed by openwifi_bss_info_changed: BSS_CHANGED_ERP_SLOT
|
|
priv->ampdu_reference = 0;
|
|
|
|
priv->band_2GHz.band = NL80211_BAND_2GHZ;
|
|
priv->band_2GHz.channels = priv->channels_2GHz;
|
|
priv->band_2GHz.n_channels = ARRAY_SIZE(priv->channels_2GHz);
|
|
priv->band_2GHz.bitrates = priv->rates_2GHz;
|
|
priv->band_2GHz.n_bitrates = ARRAY_SIZE(priv->rates_2GHz);
|
|
priv->band_2GHz.ht_cap.ht_supported = true;
|
|
// priv->band_2GHz.ht_cap.cap = IEEE80211_HT_CAP_SGI_20; //SGI -- short GI seems bring unnecessary stability issue
|
|
if (AGGR_ENABLE) {
|
|
priv->band_2GHz.ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K;
|
|
priv->band_2GHz.ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_2;
|
|
}
|
|
memset(&priv->band_2GHz.ht_cap.mcs, 0, sizeof(priv->band_2GHz.ht_cap.mcs));
|
|
priv->band_2GHz.ht_cap.mcs.rx_mask[0] = 0xff;
|
|
priv->band_2GHz.ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
dev->wiphy->bands[NL80211_BAND_2GHZ] = &(priv->band_2GHz);
|
|
|
|
priv->band_5GHz.band = NL80211_BAND_5GHZ;
|
|
priv->band_5GHz.channels = priv->channels_5GHz;
|
|
priv->band_5GHz.n_channels = ARRAY_SIZE(priv->channels_5GHz);
|
|
priv->band_5GHz.bitrates = priv->rates_5GHz;
|
|
priv->band_5GHz.n_bitrates = ARRAY_SIZE(priv->rates_5GHz);
|
|
priv->band_5GHz.ht_cap.ht_supported = true;
|
|
// priv->band_5GHz.ht_cap.cap = IEEE80211_HT_CAP_SGI_20; //SGI -- short GI seems bring unnecessary stability issue
|
|
if (AGGR_ENABLE) {
|
|
priv->band_5GHz.ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K;
|
|
priv->band_5GHz.ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_2;
|
|
}
|
|
memset(&priv->band_5GHz.ht_cap.mcs, 0, sizeof(priv->band_5GHz.ht_cap.mcs));
|
|
priv->band_5GHz.ht_cap.mcs.rx_mask[0] = 0xff;
|
|
priv->band_5GHz.ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
dev->wiphy->bands[NL80211_BAND_5GHZ] = &(priv->band_5GHz);
|
|
|
|
printk("%s openwifi_dev_probe: band_2GHz.n_channels %d n_bitrates %d band_5GHz.n_channels %d n_bitrates %d\n",sdr_compatible_str,
|
|
priv->band_2GHz.n_channels,priv->band_2GHz.n_bitrates,priv->band_5GHz.n_channels,priv->band_5GHz.n_bitrates);
|
|
|
|
// ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING); // remove this because we don't want: mac80211.h: host buffers frame for PS and we fetch them via ieee80211_get_buffered_bc()
|
|
ieee80211_hw_set(dev, RX_INCLUDES_FCS);
|
|
ieee80211_hw_set(dev, BEACON_TX_STATUS);//mac80211.h: The device/driver provides TX status for sent beacons.
|
|
|
|
ieee80211_hw_set(dev, REPORTS_TX_ACK_STATUS);//mac80211.h: Hardware can provide ack status reports of Tx frames to the stack
|
|
|
|
// * @IEEE80211_HW_AP_LINK_PS: When operating in AP mode the device
|
|
// * autonomously manages the PS status of connected stations. When
|
|
// * this flag is set mac80211 will not trigger PS mode for connected
|
|
// * stations based on the PM bit of incoming frames.
|
|
// * Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure
|
|
// * the PS mode of connected stations.
|
|
ieee80211_hw_set(dev, AP_LINK_PS);
|
|
|
|
if (AGGR_ENABLE) {
|
|
ieee80211_hw_set(dev, AMPDU_AGGREGATION);
|
|
}
|
|
|
|
dev->extra_tx_headroom = LEN_MPDU_DELIM;
|
|
|
|
dev->vif_data_size = sizeof(struct openwifi_vif);
|
|
dev->wiphy->interface_modes =
|
|
BIT(NL80211_IFTYPE_MONITOR)|
|
|
BIT(NL80211_IFTYPE_P2P_GO) |
|
|
BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_AP) |
|
|
BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_ADHOC) |
|
|
BIT(NL80211_IFTYPE_MESH_POINT) |
|
|
BIT(NL80211_IFTYPE_OCB);
|
|
dev->wiphy->iface_combinations = &openwifi_if_comb;
|
|
dev->wiphy->n_iface_combinations = 1;
|
|
|
|
dev->wiphy->available_antennas_tx = NUM_TX_ANT_MASK;
|
|
dev->wiphy->available_antennas_rx = NUM_RX_ANT_MASK;
|
|
|
|
dev->wiphy->regulatory_flags = (REGULATORY_STRICT_REG|REGULATORY_CUSTOM_REG); // use our own config within strict regulation
|
|
//dev->wiphy->regulatory_flags = REGULATORY_CUSTOM_REG; // use our own config
|
|
wiphy_apply_custom_regulatory(dev->wiphy, &sdr_regd);
|
|
|
|
chip_name = "ZYNQ";
|
|
|
|
/* we declare to MAC80211 all the queues except for beacon queue
|
|
* that will be eventually handled by DRV.
|
|
* TX rings are arranged in such a way that lower is the IDX,
|
|
* higher is the priority, in order to achieve direct mapping
|
|
* with mac80211, however the beacon queue is an exception and it
|
|
* is mapped on the highst tx ring IDX.
|
|
*/
|
|
dev->queues = MAX_NUM_HW_QUEUE;
|
|
//dev->queues = 1;
|
|
|
|
ieee80211_hw_set(dev, SIGNAL_DBM);
|
|
|
|
wiphy_ext_feature_set(dev->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
|
|
|
|
priv->rf = &ad9361_rf_ops;
|
|
|
|
memset(priv->dest_mac_addr_queue_map,0,sizeof(priv->dest_mac_addr_queue_map));
|
|
priv->slice_idx = 0xFFFFFFFF;
|
|
|
|
sg_init_table(&(priv->tx_sg), 1);
|
|
|
|
get_random_bytes(&rand_val, sizeof(rand_val));
|
|
rand_val%=250;
|
|
priv->mac_addr[0]=0x66; priv->mac_addr[1]=0x55; priv->mac_addr[2]=0x44; priv->mac_addr[3]=0x33; priv->mac_addr[4]=0x22;
|
|
priv->mac_addr[5]=rand_val+1;
|
|
//priv->mac_addr[5]=0x11;
|
|
if (!is_valid_ether_addr(priv->mac_addr)) {
|
|
printk(KERN_WARNING "%s openwifi_dev_probe: WARNING Invalid hwaddr! Using randomly generated MAC addr\n",sdr_compatible_str);
|
|
eth_random_addr(priv->mac_addr);
|
|
}
|
|
printk("%s openwifi_dev_probe: mac_addr %02x:%02x:%02x:%02x:%02x:%02x\n",sdr_compatible_str,priv->mac_addr[0],priv->mac_addr[1],priv->mac_addr[2],priv->mac_addr[3],priv->mac_addr[4],priv->mac_addr[5]);
|
|
SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
err = ieee80211_register_hw(dev);
|
|
if (err) {
|
|
pr_err(KERN_ERR "%s openwifi_dev_probe: WARNING Cannot register device\n",sdr_compatible_str);
|
|
err = -EIO;
|
|
goto err_free_dev;
|
|
} else {
|
|
printk("%s openwifi_dev_probe: ieee80211_register_hw %d\n",sdr_compatible_str, err);
|
|
}
|
|
|
|
// // //--------------------hook leds (not complete yet)--------------------------------
|
|
// tmp_dev = bus_find_device( &platform_bus_type, NULL, "leds", custom_match_platform_dev ); //leds is the name in devicetree, not "compatible" field
|
|
// if (!tmp_dev) {
|
|
// printk(KERN_ERR "%s bus_find_device platform_bus_type leds-gpio failed\n",sdr_compatible_str);
|
|
// err = -ENOMEM;
|
|
// goto err_free_dev;
|
|
// }
|
|
|
|
// tmp_pdev = to_platform_device(tmp_dev);
|
|
// if (!tmp_pdev) {
|
|
// printk(KERN_ERR "%s to_platform_device failed for leds-gpio\n",sdr_compatible_str);
|
|
// err = -ENOMEM;
|
|
// goto err_free_dev;
|
|
// }
|
|
|
|
// tmp_led_priv = platform_get_drvdata(tmp_pdev);
|
|
// if (!tmp_led_priv) {
|
|
// printk(KERN_ERR "%s platform_get_drvdata failed for leds-gpio\n",sdr_compatible_str);
|
|
// err = -ENOMEM;
|
|
// goto err_free_dev;
|
|
// }
|
|
// printk("%s openwifi_dev_probe: leds-gpio detect %d leds!\n",sdr_compatible_str, tmp_led_priv->num_leds);
|
|
// if (tmp_led_priv->num_leds!=4){
|
|
// printk(KERN_ERR "%s WARNING we expect 4 leds, but actual %d leds\n",sdr_compatible_str,tmp_led_priv->num_leds);
|
|
// err = -ENOMEM;
|
|
// goto err_free_dev;
|
|
// }
|
|
// gpiod_set_value(tmp_led_priv->leds[0].gpiod, 1);//light it
|
|
// gpiod_set_value(tmp_led_priv->leds[3].gpiod, 0);//black it
|
|
// priv->num_led = tmp_led_priv->num_leds;
|
|
// priv->led[0] = &(tmp_led_priv->leds[0].cdev);
|
|
// priv->led[1] = &(tmp_led_priv->leds[1].cdev);
|
|
// priv->led[2] = &(tmp_led_priv->leds[2].cdev);
|
|
// priv->led[3] = &(tmp_led_priv->leds[3].cdev);
|
|
|
|
// snprintf(priv->led_name[0], OPENWIFI_LED_MAX_NAME_LEN, "openwifi-%s::radio", wiphy_name(dev->wiphy));
|
|
// snprintf(priv->led_name[1], OPENWIFI_LED_MAX_NAME_LEN, "openwifi-%s::assoc", wiphy_name(dev->wiphy));
|
|
// snprintf(priv->led_name[2], OPENWIFI_LED_MAX_NAME_LEN, "openwifi-%s::tx", wiphy_name(dev->wiphy));
|
|
// snprintf(priv->led_name[3], OPENWIFI_LED_MAX_NAME_LEN, "openwifi-%s::rx", wiphy_name(dev->wiphy));
|
|
|
|
wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
|
|
priv->mac_addr, chip_name, priv->rf->name);
|
|
|
|
openwifi_rfkill_init(dev);
|
|
return 0;
|
|
|
|
err_free_dev:
|
|
ieee80211_free_hw(dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int openwifi_dev_remove(struct platform_device *pdev)
|
|
{
|
|
struct ieee80211_hw *dev = platform_get_drvdata(pdev);
|
|
|
|
if (!dev) {
|
|
pr_info("%s openwifi_dev_remove: dev %p\n", sdr_compatible_str, (void*)dev);
|
|
return(-1);
|
|
}
|
|
|
|
openwifi_rfkill_exit(dev);
|
|
ieee80211_unregister_hw(dev);
|
|
ieee80211_free_hw(dev);
|
|
return(0);
|
|
}
|
|
|
|
static struct platform_driver openwifi_dev_driver = {
|
|
.driver = {
|
|
.name = "sdr,sdr",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = openwifi_dev_of_ids,
|
|
},
|
|
.probe = openwifi_dev_probe,
|
|
.remove = openwifi_dev_remove,
|
|
};
|
|
|
|
module_platform_driver(openwifi_dev_driver);
|