mirror of
https://github.com/open-sdr/openwifi.git
synced 2024-12-24 15:57:09 +00:00
0a92505df2
1. add git revision software register 7 to DRV_XPU module (not FPGA XPU module) 2. fix the print of hdr->seq_ctrl in sdr.c 3. add ht_flag display to sdr.c 4. remove the sysid from devicetree because new we have our own git revision read back solution in FPGA (XPU register 63) and driver (the sotware register 7 of drv_xpu) 5. add sudo to update_sdcard.sh to make the image generation without SD card in the test-bed easier
946 lines
23 KiB
Plaintext
946 lines
23 KiB
Plaintext
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
compatible = "xlnx,zynq-7000";
|
|
interrupt-parent = <0x1>;
|
|
model = "Analog Devices ADRV9361-Z7035 (Z7035/AD9361)";
|
|
|
|
cpus {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
clocks = <0x2 0x3>;
|
|
clock-latency = <0x3e8>;
|
|
cpu0-supply = <0x3>;
|
|
operating-points = <0xa2c2b 0xf4240 0x51616 0xf4240>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0x1>;
|
|
clocks = <0x2 0x3>;
|
|
};
|
|
};
|
|
|
|
fpga-full {
|
|
compatible = "fpga-region";
|
|
fpga-mgr = <0x4>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
ranges;
|
|
};
|
|
|
|
pmu@f8891000 {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <0x0 0x5 0x4 0x0 0x6 0x4>;
|
|
interrupt-parent = <0x1>;
|
|
reg = <0xf8891000 0x1000 0xf8893000 0x1000>;
|
|
};
|
|
|
|
fixedregulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCCPINT";
|
|
regulator-min-microvolt = <0xf4240>;
|
|
regulator-max-microvolt = <0xf4240>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
linux,phandle = <0x3>;
|
|
phandle = <0x3>;
|
|
};
|
|
|
|
amba {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "simple-bus";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
interrupt-parent = <0x1>;
|
|
ranges;
|
|
|
|
adc@f8007100 {
|
|
compatible = "xlnx,zynq-xadc-1.00.a";
|
|
reg = <0xf8007100 0x20>;
|
|
interrupts = <0x0 0x7 0x4>;
|
|
interrupt-parent = <0x1>;
|
|
clocks = <0x2 0xc>;
|
|
};
|
|
|
|
can@e0008000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <0x2 0x13 0x2 0x24>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0008000 0x1000>;
|
|
interrupts = <0x0 0x1c 0x4>;
|
|
interrupt-parent = <0x1>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
can@e0009000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <0x2 0x14 0x2 0x25>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0009000 0x1000>;
|
|
interrupts = <0x0 0x33 0x4>;
|
|
interrupt-parent = <0x1>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
gpio@e000a000 {
|
|
compatible = "xlnx,zynq-gpio-1.0";
|
|
#gpio-cells = <0x2>;
|
|
clocks = <0x2 0x2a>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x2>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x14 0x4>;
|
|
reg = <0xe000a000 0x1000>;
|
|
linux,phandle = <0x6>;
|
|
phandle = <0x6>;
|
|
};
|
|
|
|
i2c@e0004000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <0x2 0x26>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x19 0x4>;
|
|
reg = <0xe0004000 0x1000>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
};
|
|
|
|
i2c@e0005000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <0x2 0x27>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x30 0x4>;
|
|
reg = <0xe0005000 0x1000>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
};
|
|
|
|
interrupt-controller@f8f01000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <0x3>;
|
|
interrupt-controller;
|
|
reg = <0xf8f01000 0x1000 0xf8f00100 0x100>;
|
|
linux,phandle = <0x1>;
|
|
phandle = <0x1>;
|
|
};
|
|
|
|
cache-controller@f8f02000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xf8f02000 0x1000>;
|
|
interrupts = <0x0 0x2 0x4>;
|
|
arm,data-latency = <0x3 0x2 0x2>;
|
|
arm,tag-latency = <0x2 0x2 0x2>;
|
|
cache-unified;
|
|
cache-level = <0x2>;
|
|
};
|
|
|
|
memory-controller@f8006000 {
|
|
compatible = "xlnx,zynq-ddrc-a05";
|
|
reg = <0xf8006000 0x1000>;
|
|
};
|
|
|
|
ocmc@f800c000 {
|
|
compatible = "xlnx,zynq-ocmc-1.0";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x3 0x4>;
|
|
reg = <0xf800c000 0x1000>;
|
|
};
|
|
|
|
serial@e0000000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <0x2 0x17 0x2 0x28>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xe0000000 0x1000>;
|
|
interrupts = <0x0 0x1b 0x4>;
|
|
};
|
|
|
|
serial@e0001000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "okay";
|
|
clocks = <0x2 0x18 0x2 0x29>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xe0001000 0x1000>;
|
|
interrupts = <0x0 0x32 0x4>;
|
|
};
|
|
|
|
spi@e0006000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0006000 0x1000>;
|
|
status = "okay";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x1a 0x4>;
|
|
clocks = <0x2 0x19 0x2 0x22>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
ad9361-phy@0 {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
#clock-cells = <0x1>;
|
|
compatible = "adi,ad9361";
|
|
reg = <0x0>;
|
|
spi-cpha;
|
|
spi-max-frequency = <0x989680>;
|
|
clocks = <0x5 0x0>;
|
|
clock-names = "ad9361_ext_refclk";
|
|
clock-output-names = "rx_sampl_clk", "tx_sampl_clk";
|
|
adi,digital-interface-tune-skip-mode = <0x0>;
|
|
adi,pp-tx-swap-enable;
|
|
adi,pp-rx-swap-enable;
|
|
adi,rx-frame-pulse-mode-enable;
|
|
adi,lvds-mode-enable;
|
|
adi,lvds-bias-mV = <0x96>;
|
|
adi,lvds-rx-onchip-termination-enable;
|
|
adi,rx-data-delay = <0x4>;
|
|
adi,tx-fb-clock-delay = <0x7>;
|
|
adi,xo-disable-use-ext-refclk-enable;
|
|
adi,2rx-2tx-mode-enable;
|
|
adi,frequency-division-duplex-mode-enable;
|
|
adi,rx-rf-port-input-select = <0x0>;
|
|
adi,tx-rf-port-input-select = <0x0>;
|
|
adi,tx-attenuation-mdB = <0x2710>;
|
|
adi,tx-lo-powerdown-managed-enable;
|
|
adi,rf-rx-bandwidth-hz = <0x112a880>;
|
|
adi,rf-tx-bandwidth-hz = <0x112a880>;
|
|
adi,rx-synthesizer-frequency-hz = <0x0 0x8f0d1800>;
|
|
adi,tx-synthesizer-frequency-hz = <0x0 0x92080880>;
|
|
adi,rx-path-clock-frequencies = <0x3a980000 0xea60000 0x7530000 0x3a98000 0x1d4c000 0x1d4c000>;
|
|
adi,tx-path-clock-frequencies = <0x3a980000 0x7530000 0x7530000 0x3a98000 0x1d4c000 0x1d4c000>;
|
|
adi,gc-rx1-mode = <0x2>;
|
|
adi,gc-rx2-mode = <0x2>;
|
|
adi,gc-adc-ovr-sample-size = <0x4>;
|
|
adi,gc-adc-small-overload-thresh = <0x2f>;
|
|
adi,gc-adc-large-overload-thresh = <0x3a>;
|
|
adi,gc-lmt-overload-high-thresh = <0x320>;
|
|
adi,gc-lmt-overload-low-thresh = <0x2c0>;
|
|
adi,gc-dec-pow-measurement-duration = <0x2000>;
|
|
adi,gc-low-power-thresh = <0x18>;
|
|
adi,mgc-inc-gain-step = <0x2>;
|
|
adi,mgc-dec-gain-step = <0x2>;
|
|
adi,mgc-split-table-ctrl-inp-gain-mode = <0x0>;
|
|
adi,agc-attack-delay-extra-margin-us = <0x1>;
|
|
adi,agc-outer-thresh-high = <0x5>;
|
|
adi,agc-outer-thresh-high-dec-steps = <0x2>;
|
|
adi,agc-inner-thresh-high = <0xa>;
|
|
adi,agc-inner-thresh-high-dec-steps = <0x1>;
|
|
adi,agc-inner-thresh-low = <0xc>;
|
|
adi,agc-inner-thresh-low-inc-steps = <0x1>;
|
|
adi,agc-outer-thresh-low = <0x12>;
|
|
adi,agc-outer-thresh-low-inc-steps = <0x2>;
|
|
adi,agc-adc-small-overload-exceed-counter = <0xa>;
|
|
adi,agc-adc-large-overload-exceed-counter = <0xa>;
|
|
adi,agc-adc-large-overload-inc-steps = <0x2>;
|
|
adi,agc-lmt-overload-large-exceed-counter = <0xa>;
|
|
adi,agc-lmt-overload-small-exceed-counter = <0xa>;
|
|
adi,agc-lmt-overload-large-inc-steps = <0x2>;
|
|
adi,agc-gain-update-interval-us = <0x3e8>;
|
|
adi,fagc-dec-pow-measurement-duration = <0x40>;
|
|
adi,fagc-lp-thresh-increment-steps = <0x1>;
|
|
adi,fagc-lp-thresh-increment-time = <0x5>;
|
|
adi,fagc-energy-lost-stronger-sig-gain-lock-exit-cnt = <0x8>;
|
|
adi,fagc-final-overrange-count = <0x3>;
|
|
adi,fagc-gain-index-type-after-exit-rx-mode = <0x0>;
|
|
adi,fagc-lmt-final-settling-steps = <0x1>;
|
|
adi,fagc-lock-level = <0xa>;
|
|
adi,fagc-lock-level-gain-increase-upper-limit = <0x5>;
|
|
adi,fagc-lock-level-lmt-gain-increase-enable;
|
|
adi,fagc-lpf-final-settling-steps = <0x1>;
|
|
adi,fagc-optimized-gain-offset = <0x5>;
|
|
adi,fagc-power-measurement-duration-in-state5 = <0x40>;
|
|
adi,fagc-rst-gla-engergy-lost-goto-optim-gain-enable;
|
|
adi,fagc-rst-gla-engergy-lost-sig-thresh-below-ll = <0xa>;
|
|
adi,fagc-rst-gla-engergy-lost-sig-thresh-exceeded-enable;
|
|
adi,fagc-rst-gla-if-en-agc-pulled-high-mode = <0x0>;
|
|
adi,fagc-rst-gla-large-adc-overload-enable;
|
|
adi,fagc-rst-gla-large-lmt-overload-enable;
|
|
adi,fagc-rst-gla-stronger-sig-thresh-above-ll = <0xa>;
|
|
adi,fagc-rst-gla-stronger-sig-thresh-exceeded-enable;
|
|
adi,fagc-state-wait-time-ns = <0x104>;
|
|
adi,fagc-use-last-lock-level-for-set-gain-enable;
|
|
adi,rssi-restart-mode = <0x3>;
|
|
adi,rssi-delay = <0x1>;
|
|
adi,rssi-wait = <0x1>;
|
|
adi,rssi-duration = <0x3e8>;
|
|
adi,ctrl-outs-index = <0x0>;
|
|
adi,ctrl-outs-enable-mask = <0xff>;
|
|
adi,temp-sense-measurement-interval-ms = <0x3e8>;
|
|
adi,temp-sense-offset-signed = <0xce>;
|
|
adi,temp-sense-periodic-measurement-enable;
|
|
adi,aux-dac-manual-mode-enable;
|
|
adi,aux-dac1-default-value-mV = <0x0>;
|
|
adi,aux-dac1-rx-delay-us = <0x0>;
|
|
adi,aux-dac1-tx-delay-us = <0x0>;
|
|
adi,aux-dac2-default-value-mV = <0x0>;
|
|
adi,aux-dac2-rx-delay-us = <0x0>;
|
|
adi,aux-dac2-tx-delay-us = <0x0>;
|
|
en_agc-gpios = <0x6 0x62 0x0>;
|
|
sync-gpios = <0x6 0x63 0x0>;
|
|
reset-gpios = <0x6 0x64 0x0>;
|
|
enable-gpios = <0x6 0x65 0x0>;
|
|
txnrx-gpios = <0x6 0x66 0x0>;
|
|
linux,phandle = <0xc>;
|
|
phandle = <0xc>;
|
|
};
|
|
};
|
|
|
|
spi@e0007000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0007000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x31 0x4>;
|
|
clocks = <0x2 0x1a 0x2 0x23>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
};
|
|
|
|
spi@e000d000 {
|
|
clock-names = "ref_clk", "pclk";
|
|
clocks = <0x2 0xa 0x2 0x2b>;
|
|
compatible = "xlnx,zynq-qspi-1.0";
|
|
status = "okay";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x13 0x4>;
|
|
reg = <0xe000d000 0x1000>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
is-dual = <0x0>;
|
|
num-cs = <0x1>;
|
|
|
|
ps7-qspi@0 {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
spi-tx-bus-width = <0x1>;
|
|
spi-rx-bus-width = <0x4>;
|
|
compatible = "n25q256a", "jedec,spi-nor";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <0x2faf080>;
|
|
|
|
partition@qspi-fsbl-uboot {
|
|
label = "qspi-fsbl-uboot";
|
|
reg = <0x0 0xe0000>;
|
|
};
|
|
|
|
partition@qspi-uboot-env {
|
|
label = "qspi-uboot-env";
|
|
reg = <0xe0000 0x20000>;
|
|
};
|
|
|
|
partition@qspi-linux {
|
|
label = "qspi-linux";
|
|
reg = <0x100000 0x500000>;
|
|
};
|
|
|
|
partition@qspi-device-tree {
|
|
label = "qspi-device-tree";
|
|
reg = <0x600000 0x20000>;
|
|
};
|
|
|
|
partition@qspi-rootfs {
|
|
label = "qspi-rootfs";
|
|
reg = <0x620000 0xce0000>;
|
|
};
|
|
|
|
partition@qspi-bitstream {
|
|
label = "qspi-bitstream";
|
|
reg = <0x1300000 0xd00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory-controller@e000e000 {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
status = "disabled";
|
|
clock-names = "memclk", "aclk";
|
|
clocks = <0x2 0xb 0x2 0x2c>;
|
|
compatible = "arm,pl353-smc-r2p1";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x12 0x4>;
|
|
ranges;
|
|
reg = <0xe000e000 0x1000>;
|
|
|
|
flash@e1000000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl353-nand-r2p1";
|
|
reg = <0xe1000000 0x1000000>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
};
|
|
|
|
flash@e2000000 {
|
|
status = "disabled";
|
|
compatible = "cfi-flash";
|
|
reg = <0xe2000000 0x2000000>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
};
|
|
};
|
|
|
|
ethernet@e000b000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000b000 0x1000>;
|
|
status = "okay";
|
|
interrupts = <0x0 0x16 0x4>;
|
|
clocks = <0x2 0x1e 0x2 0x1e 0x2 0xd>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
phy-handle = <0x7>;
|
|
phy-mode = "rgmii-id";
|
|
|
|
phy@0 {
|
|
device_type = "ethernet-phy";
|
|
reg = <0x0>;
|
|
marvell,reg-init = <0x3 0x10 0xff00 0x1e 0x3 0x11 0xfff0 0x0>;
|
|
linux,phandle = <0x7>;
|
|
phandle = <0x7>;
|
|
};
|
|
};
|
|
|
|
ethernet@e000c000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000c000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0x0 0x2d 0x4>;
|
|
clocks = <0x2 0x1f 0x2 0x1f 0x2 0xe>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
};
|
|
|
|
mmc@e0100000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "okay";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <0x2 0x15 0x2 0x20>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x18 0x4>;
|
|
reg = <0xe0100000 0x1000>;
|
|
disable-wp;
|
|
};
|
|
|
|
mmc@e0101000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <0x2 0x16 0x2 0x21>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x2f 0x4>;
|
|
reg = <0xe0101000 0x1000>;
|
|
};
|
|
|
|
slcr@f8000000 {
|
|
u-boot,dm-pre-reloc;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
|
|
reg = <0xf8000000 0x1000>;
|
|
ranges;
|
|
linux,phandle = <0x8>;
|
|
phandle = <0x8>;
|
|
|
|
clkc@100 {
|
|
u-boot,dm-pre-reloc;
|
|
#clock-cells = <0x1>;
|
|
compatible = "xlnx,ps7-clkc";
|
|
fclk-enable = <0xf>;
|
|
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", "dci", "lqspi", "smc", "pcap", "gem0", "gem1", "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma", "usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper", "sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper", "smc_aper", "swdt", "dbg_trc", "dbg_apb";
|
|
reg = <0x100 0x100>;
|
|
ps-clk-frequency = <0x1fca055>;
|
|
linux,phandle = <0x2>;
|
|
phandle = <0x2>;
|
|
};
|
|
|
|
rstc@200 {
|
|
compatible = "xlnx,zynq-reset";
|
|
reg = <0x200 0x48>;
|
|
#reset-cells = <0x1>;
|
|
syscon = <0x8>;
|
|
};
|
|
|
|
pinctrl@700 {
|
|
compatible = "xlnx,pinctrl-zynq";
|
|
reg = <0x700 0x200>;
|
|
syscon = <0x8>;
|
|
};
|
|
};
|
|
|
|
dmac@f8003000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0xf8003000 0x1000>;
|
|
interrupt-parent = <0x1>;
|
|
interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7";
|
|
interrupts = <0x0 0xd 0x4 0x0 0xe 0x4 0x0 0xf 0x4 0x0 0x10 0x4 0x0 0x11 0x4 0x0 0x28 0x4 0x0 0x29 0x4 0x0 0x2a 0x4 0x0 0x2b 0x4>;
|
|
#dma-cells = <0x1>;
|
|
#dma-channels = <0x8>;
|
|
#dma-requests = <0x4>;
|
|
clocks = <0x2 0x1b>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
devcfg@f8007000 {
|
|
compatible = "xlnx,zynq-devcfg-1.0";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x8 0x4>;
|
|
reg = <0xf8007000 0x100>;
|
|
clocks = <0x2 0xc 0x2 0xf 0x2 0x10 0x2 0x11 0x2 0x12>;
|
|
clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
|
|
syscon = <0x8>;
|
|
linux,phandle = <0x4>;
|
|
phandle = <0x4>;
|
|
};
|
|
|
|
efuse@f800d000 {
|
|
compatible = "xlnx,zynq-efuse";
|
|
reg = <0xf800d000 0x20>;
|
|
};
|
|
|
|
timer@f8f00200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0xf8f00200 0x20>;
|
|
interrupts = <0x1 0xb 0x301>;
|
|
interrupt-parent = <0x1>;
|
|
clocks = <0x2 0x4>;
|
|
};
|
|
|
|
timer@f8001000 {
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0xa 0x4 0x0 0xb 0x4 0x0 0xc 0x4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <0x2 0x6>;
|
|
reg = <0xf8001000 0x1000>;
|
|
};
|
|
|
|
timer@f8002000 {
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x25 0x4 0x0 0x26 0x4 0x0 0x27 0x4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <0x2 0x6>;
|
|
reg = <0xf8002000 0x1000>;
|
|
};
|
|
|
|
timer@f8f00600 {
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x1 0xd 0x301>;
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xf8f00600 0x20>;
|
|
clocks = <0x2 0x4>;
|
|
};
|
|
|
|
usb@e0002000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "okay";
|
|
clocks = <0x2 0x1c>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x15 0x4>;
|
|
reg = <0xe0002000 0x1000>;
|
|
phy_type = "ulpi";
|
|
dr_mode = "host";
|
|
xlnx,phy-reset-gpio = <0x6 0x7 0x0>;
|
|
};
|
|
|
|
usb@e0003000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <0x2 0x1d>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x2c 0x4>;
|
|
reg = <0xe0003000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
watchdog@f8005000 {
|
|
clocks = <0x2 0x2d>;
|
|
compatible = "cdns,wdt-r1p2";
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x9 0x1>;
|
|
reg = <0xf8005000 0x1000>;
|
|
timeout-sec = <0xa>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
ethernet0 = "/amba/ethernet@e000b000";
|
|
serial0 = "/amba/serial@e0001000";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000>;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = "/amba@0/uart@E0001000";
|
|
};
|
|
|
|
clocks {
|
|
|
|
clock@0 {
|
|
#clock-cells = <0x0>;
|
|
compatible = "adjustable-clock";
|
|
clock-frequency = <0x2625a00>;
|
|
clock-accuracy = <0x30d40>;
|
|
clock-output-names = "XO_40MHz";
|
|
linux,phandle = <0x9>;
|
|
phandle = <0x9>;
|
|
};
|
|
|
|
clock@2 {
|
|
#clock-cells = <0x0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0x16e3600>;
|
|
clock-output-names = "24MHz";
|
|
linux,phandle = <0xa>;
|
|
phandle = <0xa>;
|
|
};
|
|
};
|
|
|
|
ad9361-refclk-gpio-gate@0 {
|
|
#clock-cells = <0x0>;
|
|
compatible = "gpio-gate-clock";
|
|
clocks = <0x9>;
|
|
enable-gpios = <0x6 0x69 0x0>;
|
|
clk-set-rate-parent-enable;
|
|
clock-output-names = "ad9361_ext_refclk";
|
|
linux,phandle = <0x5>;
|
|
phandle = <0x5>;
|
|
};
|
|
|
|
usb-ulpe-gpio-gate@0 {
|
|
#clock-cells = <0x0>;
|
|
compatible = "gpio-gate-clock";
|
|
clocks = <0xa>;
|
|
enable-gpios = <0x6 0x9 0x1>;
|
|
};
|
|
|
|
fpga-axi@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
ranges;
|
|
|
|
i2c@41600000 {
|
|
compatible = "xlnx,axi-iic-1.02.a", "xlnx,xps-iic-2.00.a";
|
|
reg = <0x41600000 0x10000>;
|
|
interrupt-parent = <0x1>;
|
|
interrupts = <0x0 0x3a 0x4>;
|
|
clocks = <0x2 0xf>;
|
|
clock-names = "pclk";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
adm1166@68 {
|
|
compatible = "adi,adm1166";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
ad7291-bob@2f {
|
|
compatible = "adi,ad7291";
|
|
reg = <0x2f>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "at24,24c32";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
dma@7c400000 {
|
|
compatible = "adi,axi-dmac-1.00.a";
|
|
reg = <0x7c400000 0x10000>;
|
|
#dma-cells = <0x1>;
|
|
interrupts = <0x0 0x39 0x0>;
|
|
clocks = <0x2 0x10>;
|
|
linux,phandle = <0xb>;
|
|
phandle = <0xb>;
|
|
|
|
adi,channels {
|
|
#size-cells = <0x0>;
|
|
#address-cells = <0x1>;
|
|
|
|
dma-channel@0 {
|
|
reg = <0x0>;
|
|
adi,source-bus-width = <0x40>;
|
|
adi,source-bus-type = <0x2>;
|
|
adi,destination-bus-width = <0x40>;
|
|
adi,destination-bus-type = <0x0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dma@7c420000 {
|
|
compatible = "adi,axi-dmac-1.00.a";
|
|
reg = <0x7c420000 0x10000>;
|
|
#dma-cells = <0x1>;
|
|
interrupts = <0x0 0x38 0x0>;
|
|
clocks = <0x2 0x10>;
|
|
linux,phandle = <0xd>;
|
|
phandle = <0xd>;
|
|
|
|
adi,channels {
|
|
#size-cells = <0x0>;
|
|
#address-cells = <0x1>;
|
|
|
|
dma-channel@0 {
|
|
reg = <0x0>;
|
|
adi,source-bus-width = <0x40>;
|
|
adi,source-bus-type = <0x0>;
|
|
adi,destination-bus-width = <0x40>;
|
|
adi,destination-bus-type = <0x2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sdr: sdr {
|
|
compatible ="sdr,sdr";
|
|
dmas = <&rx_dma 0
|
|
&rx_dma 1
|
|
&tx_dma 0
|
|
&tx_dma 1>;
|
|
dma-names = "rx_dma_mm2s", "rx_dma_s2mm", "tx_dma_mm2s", "tx_dma_s2mm";
|
|
interrupt-names = "not_valid_anymore", "rx_pkt_intr", "tx_itrpt0", "tx_itrpt1";
|
|
interrupt-parent = <1>;
|
|
interrupts = <0 29 1 0 30 1 0 33 1 0 34 1>;
|
|
} ;
|
|
|
|
axidmatest_1: axidmatest@1 {
|
|
compatible ="xlnx,axi-dma-test-1.00.a";
|
|
dmas = <&rx_dma 0
|
|
&rx_dma 1>;
|
|
dma-names = "axidma0", "axidma1";
|
|
} ;
|
|
|
|
tx_dma: dma@80400000 {
|
|
#dma-cells = <1>;
|
|
clock-names = "s_axi_lite_aclk", "m_axi_sg_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk";
|
|
clocks = <0x2 0x11>, <0x2 0x11>, <0x2 0x11>, <0x2 0x11>;
|
|
compatible = "xlnx,axi-dma-1.00.a";
|
|
interrupt-names = "mm2s_introut", "s2mm_introut";
|
|
interrupt-parent = <1>;
|
|
interrupts = <0 35 4 0 36 4>;
|
|
reg = <0x80400000 0x10000>;
|
|
xlnx,addrwidth = <0x20>;
|
|
xlnx,include-sg ;
|
|
xlnx,sg-length-width = <0xe>;
|
|
dma-channel@80400000 {
|
|
compatible = "xlnx,axi-dma-mm2s-channel";
|
|
dma-channels = <0x1>;
|
|
interrupts = <0 35 4>;
|
|
xlnx,datawidth = <0x40>;
|
|
xlnx,device-id = <0x0>;
|
|
};
|
|
dma-channel@80400030 {
|
|
compatible = "xlnx,axi-dma-s2mm-channel";
|
|
dma-channels = <0x1>;
|
|
interrupts = <0 36 4>;
|
|
xlnx,datawidth = <0x40>;
|
|
xlnx,device-id = <0x0>;
|
|
};
|
|
};
|
|
|
|
rx_dma: dma@80410000 {
|
|
#dma-cells = <1>;
|
|
clock-names = "s_axi_lite_aclk", "m_axi_sg_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk";
|
|
clocks = <0x2 0x11>, <0x2 0x11>, <0x2 0x11>, <0x2 0x11>;
|
|
compatible = "xlnx,axi-dma-1.00.a";
|
|
//dma-coherent ;
|
|
interrupt-names = "mm2s_introut", "s2mm_introut";
|
|
interrupt-parent = <1>;
|
|
interrupts = <0 31 4 0 32 4>;
|
|
reg = <0x80410000 0x10000>;
|
|
xlnx,addrwidth = <0x20>;
|
|
xlnx,include-sg ;
|
|
xlnx,sg-length-width = <0xe>;
|
|
dma-channel@80410000 {
|
|
compatible = "xlnx,axi-dma-mm2s-channel";
|
|
dma-channels = <0x1>;
|
|
interrupts = <0 31 4>;
|
|
xlnx,datawidth = <0x40>;
|
|
xlnx,device-id = <0x1>;
|
|
};
|
|
dma-channel@80410030 {
|
|
compatible = "xlnx,axi-dma-s2mm-channel";
|
|
dma-channels = <0x1>;
|
|
interrupts = <0 32 4>;
|
|
xlnx,datawidth = <0x40>;
|
|
xlnx,device-id = <0x1>;
|
|
};
|
|
};
|
|
|
|
tx_intf_0: tx_intf@83c00000 {
|
|
clock-names = "s00_axi_aclk", "s00_axis_aclk", "s01_axis_aclk", "m00_axis_aclk";
|
|
clocks = <0x2 0x11>, <0x2 0x11>, <0x2 0x11>, <0x2 0x11>;
|
|
compatible = "sdr,tx_intf";
|
|
interrupt-names = "tx_itrpt0", "tx_itrpt1";
|
|
interrupt-parent = <1>;
|
|
interrupts = <0 33 1 0 34 1>;
|
|
reg = <0x83c00000 0x10000>;
|
|
xlnx,s00-axi-addr-width = <0x7>;
|
|
xlnx,s00-axi-data-width = <0x20>;
|
|
};
|
|
|
|
rx_intf_0: rx_intf@83c20000 {
|
|
clock-names = "s00_axi_aclk", "s00_axis_aclk", "m00_axis_aclk";
|
|
clocks = <0x2 0x11>, <0x2 0x11>, <0x2 0x11>;
|
|
compatible = "sdr,rx_intf";
|
|
interrupt-names = "not_valid_anymore", "rx_pkt_intr";
|
|
interrupt-parent = <1>;
|
|
interrupts = <0 29 1 0 30 1>;
|
|
reg = <0x83c20000 0x10000>;
|
|
xlnx,s00-axi-addr-width = <0x7>;
|
|
xlnx,s00-axi-data-width = <0x20>;
|
|
};
|
|
|
|
openofdm_tx_0: openofdm_tx@83c10000 {
|
|
clock-names = "clk";
|
|
clocks = <0x2 0x11>;
|
|
compatible = "sdr,openofdm_tx";
|
|
reg = <0x83c10000 0x10000>;
|
|
};
|
|
|
|
openofdm_rx_0: openofdm_rx@83c30000 {
|
|
clock-names = "clk";
|
|
clocks = <0x2 0x11>;
|
|
compatible = "sdr,openofdm_rx";
|
|
reg = <0x83c30000 0x10000>;
|
|
};
|
|
|
|
xpu_0: xpu@83c40000 {
|
|
clock-names = "s00_axi_aclk";
|
|
clocks = <0x2 0x11>;
|
|
compatible = "sdr,xpu";
|
|
reg = <0x83c40000 0x10000>;
|
|
};
|
|
|
|
cf-ad9361-lpc@79020000 {
|
|
compatible = "adi,axi-ad9361-6.00.a";
|
|
reg = <0x79020000 0x6000>;
|
|
dmas = <0xb 0x0>;
|
|
dma-names = "rx";
|
|
spibus-connected = <0xc>;
|
|
};
|
|
|
|
cf-ad9361-dds-core-lpc@79024000 {
|
|
compatible = "adi,axi-ad9361-dds-6.00.a";
|
|
reg = <0x79024000 0x1000>;
|
|
clocks = <0xc 0xd>;
|
|
clock-names = "sampl_clk";
|
|
dmas = <0xd 0x0>;
|
|
dma-names = "tx";
|
|
};
|
|
|
|
mwipcore@43c00000 {
|
|
compatible = "mathworks,mwipcore-axi4lite-v1.00";
|
|
reg = <0x43c00000 0xffff>;
|
|
};
|
|
|
|
/*axi-sysid-0@45000000 {
|
|
compatible = "adi,axi-sysid-1.00.a";
|
|
reg = <0x45000000 0x10000>;
|
|
};*/
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led0 {
|
|
label = "led0:green";
|
|
gpios = <0x6 0x3a 0x0>;
|
|
};
|
|
|
|
led1 {
|
|
label = "led1:green";
|
|
gpios = <0x6 0x3b 0x0>;
|
|
};
|
|
|
|
led2 {
|
|
label = "led2:green";
|
|
gpios = <0x6 0x3c 0x0>;
|
|
};
|
|
|
|
led3 {
|
|
label = "led3:green";
|
|
gpios = <0x6 0x3d 0x0>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
autorepeat;
|
|
|
|
pb0 {
|
|
label = "Left";
|
|
linux,code = <0x69>;
|
|
gpios = <0x6 0x36 0x0>;
|
|
};
|
|
|
|
pb1 {
|
|
label = "Right";
|
|
linux,code = <0x6a>;
|
|
gpios = <0x6 0x37 0x0>;
|
|
};
|
|
|
|
pb2 {
|
|
label = "Up";
|
|
linux,code = <0x67>;
|
|
gpios = <0x6 0x38 0x0>;
|
|
};
|
|
|
|
pb3 {
|
|
label = "Down";
|
|
linux,code = <0x6c>;
|
|
gpios = <0x6 0x39 0x0>;
|
|
};
|
|
|
|
sw0 {
|
|
label = "SW0";
|
|
linux,input-type = <0x5>;
|
|
linux,code = <0x0>;
|
|
gpios = <0x6 0x3e 0x0>;
|
|
};
|
|
|
|
sw1 {
|
|
label = "SW1";
|
|
linux,input-type = <0x5>;
|
|
linux,code = <0x1>;
|
|
gpios = <0x6 0x3f 0x0>;
|
|
};
|
|
|
|
sw2 {
|
|
label = "SW2";
|
|
linux,input-type = <0x5>;
|
|
linux,code = <0x2>;
|
|
gpios = <0x6 0x40 0x0>;
|
|
};
|
|
|
|
sw3 {
|
|
label = "SW3";
|
|
linux,input-type = <0x5>;
|
|
linux,code = <0x3>;
|
|
gpios = <0x6 0x41 0x0>;
|
|
};
|
|
};
|
|
};
|