mirror of
https://github.com/open-sdr/openwifi.git
synced 2024-12-27 09:12:41 +00:00
2833 lines
109 KiB
C
2833 lines
109 KiB
C
/*
|
|
* AD9361
|
|
*
|
|
* Copyright 2013-2018 Analog Devices Inc.
|
|
*
|
|
* Modified by Xianjun jiao. putaoshu@msn.com; xianjun.jiao@imec.be
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#ifndef IIO_AD9361_REGS_H_
|
|
#define IIO_AD9361_REGS_H_
|
|
|
|
#define REG_SPI_CONF 0x000 /* SPI Configuration */
|
|
#define REG_MULTICHIP_SYNC_AND_TX_MON_CTRL 0x001 /* Multi-Chip Sync and Tx Mon Control */
|
|
#define REG_TX_ENABLE_FILTER_CTRL 0x002 /* Tx Enable & Filter Control */
|
|
#define REG_RX_ENABLE_FILTER_CTRL 0x003 /* Rx Enable & Filter Control */
|
|
#define REG_INPUT_SELECT 0x004 /* Input Select */
|
|
#define REG_RFPLL_DIVIDERS 0x005 /* RFPLL Dividers */
|
|
#define REG_RX_CLOCK_DATA_DELAY 0x006 /* Rx Clock & Data Delay */
|
|
#define REG_TX_CLOCK_DATA_DELAY 0x007 /* Tx Clock & Data Delay */
|
|
#define REG_CLOCK_ENABLE 0x009 /* Clock Enable */
|
|
#define REG_BBPLL 0x00A /* BBPLL */
|
|
#define REG_TEMP_OFFSET 0x00B /* Offset */
|
|
#define REG_START_TEMP_READING 0x00C /* Start Temp Reading */
|
|
#define REG_TEMP_SENSE2 0x00D /* Temp Sense2 */
|
|
#define REG_TEMPERATURE 0x00E /* Temperature */
|
|
#define REG_TEMP_SENSOR_CONFIG 0x00F /* Temp Sensor Config */
|
|
#define REG_PARALLEL_PORT_CONF_1 0x010 /* Parallel Port Configuration 1 */
|
|
#define REG_PARALLEL_PORT_CONF_2 0x011 /* Parallel Port Configuration 2 */
|
|
#define REG_PARALLEL_PORT_CONF_3 0x012 /* Parallel Port Configuration 3 */
|
|
#define REG_ENSM_MODE 0x013 /* ENSM Mode */
|
|
#define REG_ENSM_CONFIG_1 0x014 /* ENSM Config 1 */
|
|
#define REG_ENSM_CONFIG_2 0x015 /* ENSM Config 2 */
|
|
#define REG_CALIBRATION_CTRL 0x016 /* Calibration Control */
|
|
#define REG_STATE 0x017 /* State */
|
|
#define REG_AUXDAC_1_WORD 0x018 /* AuxDAC 1 Word */
|
|
#define REG_AUXDAC_2_WORD 0x019 /* AuxDAC 2 Word */
|
|
#define REG_AUXDAC_1_CONFIG 0x01A /* AuxDAC 1 Config */
|
|
#define REG_AUXDAC_2_CONFIG 0x01B /* AuxDAC 2 Config */
|
|
#define REG_AUXADC_CLOCK_DIVIDER 0x01C /* AuxADC Clock Divider */
|
|
#define REG_AUXADC_CONFIG 0x01D /* Aux ADC Config */
|
|
#define REG_AUXADC_WORD_MSB 0x01E /* AuxADC Word MSB */
|
|
#define REG_AUXADC_LSB 0x01F /* AuxADC LSB */
|
|
#define REG_AUTO_GPO 0x020 /* Auto GPO */
|
|
#define REG_AGC_GAIN_LOCK_DELAY 0x021 /* AGC Gain Lock Delay */
|
|
#define REG_AGC_ATTACK_DELAY 0x022 /* AGC Attack Delay */
|
|
#define REG_AUXDAC_ENABLE_CTRL 0x023 /* AuxDAC Enable Control */
|
|
#define REG_RX_LOAD_SYNTH_DELAY 0x024 /* RX Load Synth Delay */
|
|
#define REG_TX_LOAD_SYNTH_DELAY 0x025 /* TX Load Synth Delay */
|
|
#define REG_EXTERNAL_LNA_CTRL 0x026 /* External LNA control */
|
|
#define REG_GPO_FORCE_AND_INIT 0x027 /* GPO Force and Init */
|
|
#define REG_GPO0_RX_DELAY 0x028 /* GPO0 Rx delay */
|
|
#define REG_GPO1_RX_DELAY 0x029 /* GPO1 Rx delay */
|
|
#define REG_GPO2_RX_DELAY 0x02A /* GPO2 Rx delay */
|
|
#define REG_GPO3_RX_DELAY 0x02B /* GPO3 Rx delay */
|
|
#define REG_GPO0_TX_DELAY 0x02C /* GPO0 Tx Delay */
|
|
#define REG_GPO1_TX_DELAY 0x02D /* GPO1 Tx Delay */
|
|
#define REG_GPO2_TX_DELAY 0x02E /* GPO2 Tx Delay */
|
|
#define REG_GPO3_TX_DELAY 0x02F /* GPO3 Tx Delay */
|
|
#define REG_AUXDAC1_RX_DELAY 0x030 /* AuxDAC1 Rx Delay */
|
|
#define REG_AUXDAC1_TX_DELAY 0x031 /* AuxDAC1 Tx Delay */
|
|
#define REG_AUXDAC2_RX_DELAY 0x032 /* AuxDAC2 Rx Delay */
|
|
#define REG_AUXDAC2_TX_DELAY 0x033 /* AuxDAC2 Tx Delay */
|
|
#define REG_CTRL_OUTPUT_POINTER 0x035 /* Control Output Pointer */
|
|
#define REG_CTRL_OUTPUT_ENABLE 0x036 /* Control Output Enable */
|
|
#define REG_PRODUCT_ID 0x037 /* Product ID */
|
|
#define REG_REFERENCE_CLOCK_CYCLES 0x03A /* Reference Clock Cycles */
|
|
#define REG_DIGITAL_IO_CTRL 0x03B /* Digital I/O Control */
|
|
#define REG_LVDS_BIAS_CTRL 0x03C /* LVDS Bias control */
|
|
#define REG_LVDS_INVERT_CTRL1 0x03D /* LVDS Invert control1 */
|
|
#define REG_LVDS_INVERT_CTRL2 0x03E /* LVDS Invert control2 */
|
|
#define REG_SDM_CTRL_1 0x03F /* SDM Control 1 */
|
|
#define REG_FRACT_BB_FREQ_WORD_1 0x041 /* Fractional BB Freq Word 1 */
|
|
#define REG_FRACT_BB_FREQ_WORD_2 0x042 /* Fractional BB Freq Word 2 */
|
|
#define REG_FRACT_BB_FREQ_WORD_3 0x043 /* Fractional BB Freq Word 3 */
|
|
#define REG_INTEGER_BB_FREQ_WORD 0x044 /* Integer BB Freq Word */
|
|
#define REG_CLOCK_CTRL 0x045 /* Clock Control */
|
|
#define REG_CP_CURRENT 0x046 /* CP Current */
|
|
#define REG_CP_BLEED_CURRENT 0x047 /* CP Bleed Current */
|
|
#define REG_LOOP_FILTER_1 0x048 /* Loop Filter 1 */
|
|
#define REG_LOOP_FILTER_2 0x049 /* Loop Filter 2 */
|
|
#define REG_LOOP_FILTER_3 0x04A /* Loop Filter 3 */
|
|
#define REG_VCO_CTRL 0x04B /* VCO Control */
|
|
#define REG_VCO_PROGRAM_1 0x04C
|
|
#define REG_VCO_PROGRAM_2 0x04D
|
|
#define REG_SDM_CTRL 0x04E /* SDM Control */
|
|
#define REG_RX_SYNTH_POWER_DOWN_OVERRIDE 0x050 /* Rx Synth Power Down Override */
|
|
#define REG_TX_SYNTH_POWER_DOWN_OVERRIDE 0x051 /* TX Synth Power Down Override */
|
|
#define REG_RX_ANALOG_POWER_DOWN_OVERRIDE_1 0x052 /* Rx Analog Power Down Override 1 */
|
|
#define REG_RX_ANALOG_POWER_DOWN_OVERRIDE_2 0x053 /* Rx Analog Power Down Override 2 */
|
|
#define REG_RX1_ADC_POWER_DOWN_OVERRIDE 0x054 /* Rx1 ADC Power Down Override */
|
|
#define REG_RX2_ADC_POWER_DOWN_OVERRIDE 0x055 /* Rx2 ADC Power Down Override */
|
|
#define REG_TX_ANALOG_POWER_DOWN_OVERRIDE_1 0x056 /* Tx Analog Power Down Override 1 */
|
|
#define REG_ANALOG_POWER_DOWN_OVERRIDE 0x057 /* Analog Power Down Override */
|
|
#define REG_MISC_POWER_DOWN_OVERRIDE 0x058 /* Misc Power Down Override */
|
|
#define REG_CH_1_OVERFLOW 0x05E /* CH 1 Overflow */
|
|
#define REG_CH_2_OVERFLOW 0x05F /* CH 2 Overflow */
|
|
#define REG_TX_FILTER_COEF_ADDR 0x060 /* TX Filter Coefficient Address */
|
|
#define REG_TX_FILTER_COEF_WRITE_DATA_1 0x061 /* TX Filter Coefficient Write Data 1 */
|
|
#define REG_TX_FILTER_COEF_WRITE_DATA_2 0x062 /* TX Filter Coefficient Write Data 2 */
|
|
#define REG_TX_FILTER_COEF_READ_DATA_1 0x063 /* TX Filter Coefficient Read Data 1 */
|
|
#define REG_TX_FILTER_COEF_READ_DATA_2 0x064 /* TX Filter Coefficient Read Data 2 */
|
|
#define REG_TX_FILTER_CONF 0x065 /* TX Filter Configuration */
|
|
#define REG_TX_MON_LOW_GAIN 0x067 /* Tx Mon Low Gain */
|
|
#define REG_TX_MON_HIGH_GAIN 0x068 /* Tx Mon High Gain */
|
|
#define REG_TX_MON_DELAY 0x069 /* Tx Mon Delay */
|
|
#define REG_TX_LEVEL_THRESH 0x06A /* Tx Level Threshold */
|
|
#define REG_TX_RSSI1 0x06B /* TX RSSI1 */
|
|
#define REG_TX_RSSI2 0x06C /* TX RSSI2 */
|
|
#define REG_TX_RSSI_LSB 0x06D /* TX RSSI LSB */
|
|
#define REG_TPM_MODE_ENABLE 0x06E /* TPM Mode Enable */
|
|
#define REG_TX_MON_TEMP_GAIN_COEF 0x06F /* Temp Gain Coefficient */
|
|
#define REG_TX_MON_1_CONFIG 0x070 /* Tx Mon 1 Config */
|
|
#define REG_TX_MON_2_CONFIG 0x071 /* Tx Mon 2 Config */
|
|
#define REG_TX1_ATTEN_0 0x073 /* Tx1 Atten 0 */
|
|
#define REG_TX1_ATTEN_1 0x074 /* Tx1 Atten 1 */
|
|
#define REG_TX2_ATTEN_0 0x075 /* Tx2 Atten 0 */
|
|
#define REG_TX2_ATTEN_1 0x076 /* Tx2 Atten 1 */
|
|
#define REG_TX_ATTEN_OFFSET 0x077 /* Tx Atten Offset */
|
|
#define REG_TX_ATTEN_THRESH 0x078 /* Tx Atten Threshold */
|
|
#define REG_TX1_DIG_ATTEN 0x079 /* Tx1 Dig Attenuation */
|
|
#define REG_TX2_DIG_ATTEN 0x07C /* Tx2 Dig Attenuation */
|
|
#define REG_TX1_SYMBOL_ATTEN 0x07F /* TX1 Symbol Attenuation */
|
|
#define REG_TX2_SYMBOL_ATTEN 0x080 /* TX2 Symbol Attenuation */
|
|
#define REG_TX_SYMBOL_ATTEN_CONFIG 0x081 /* TX Symbol Atten Config */
|
|
#define REG_TX1_OUT_1_PHASE_CORR 0x08E /* Tx1 Out 1 Phase Corr */
|
|
#define REG_TX1_OUT_1_GAIN_CORR 0x08F /* Tx1 Out 1 Gain Corr */
|
|
#define REG_TX2_OUT_1_PHASE_CORR 0x090 /* Tx2 Out 1 Phase Corr */
|
|
#define REG_TX2_OUT_1_GAIN_CORR 0x091 /* Tx2 Out 1 Gain Corr */
|
|
#define REG_TX1_OUT_1_OFFSET_I 0x092 /* Tx1 Out 1 Offset I */
|
|
#define REG_TX1_OUT_1_OFFSET_Q 0x093 /* Tx1 Out 1 Offset Q */
|
|
#define REG_TX2_OUT_1_OFFSET_I 0x094 /* Tx2 Out 1 Offset I */
|
|
#define REG_TX2_OUT_1_OFFSET_Q 0x095 /* Tx2 Out 1 Offset Q */
|
|
#define REG_TX1_OUT_2_PHASE_CORR 0x096 /* Tx1 Out 2 Phase Corr */
|
|
#define REG_TX1_OUT_2_GAIN_CORR 0x097 /* Tx1 Out 2 Gain Corr */
|
|
#define REG_TX2_OUT_2_PHASE_CORR 0x098 /* Tx2 Out 2 Phase Corr */
|
|
#define REG_TX2_OUT_2_GAIN_CORR 0x099 /* Tx2 Out 2 Gain Corr */
|
|
#define REG_TX1_OUT_2_OFFSET_I 0x09A /* Tx1 Out 2 Offset I */
|
|
#define REG_TX1_OUT_2_OFFSET_Q 0x09B /* Tx1 Out 2 Offset Q */
|
|
#define REG_TX2_OUT_2_OFFSET_I 0x09C /* Tx2 Out 2 Offset I */
|
|
#define REG_TX2_OUT_2_OFFSET_Q 0x09D /* Tx2 Out 2 Offset Q */
|
|
#define REG_TX_FORCE_BITS 0x09F /* Force Bits */
|
|
#define REG_QUAD_CAL_NCO_FREQ_PHASE_OFFSET 0x0A0 /* Quad Cal NCO Freq & Phase Offset */
|
|
#define REG_QUAD_CAL_CTRL 0x0A1 /* Quad Cal Control */
|
|
#define REG_KEXP_1 0x0A2 /* Kexp 1 */
|
|
#define REG_KEXP_2 0x0A3 /* Kexp 2 */
|
|
#define REG_QUAD_SETTLE_COUNT 0x0A4 /* QUAD Settle count */
|
|
#define REG_MAG_FTEST_THRESH 0x0A5 /* Mag. Ftest Thresh */
|
|
#define REG_MAG_FTEST_THRESH_2 0x0A6 /* Mag. Ftest Thresh 2 */
|
|
#define REG_QUAD_CAL_STATUS_TX1 0x0A7 /* Quad cal status Tx1 */
|
|
#define REG_QUAD_CAL_STATUS_TX2 0x0A8 /* Quad cal status Tx2 */
|
|
#define REG_QUAD_CAL_COUNT 0x0A9 /* Quad cal Count */
|
|
#define REG_TX_QUAD_FULL_LMT_GAIN 0x0AA /* Tx Quad Full/LMT Gain */
|
|
#define REG_SQUARER_CONFIG 0x0AB /* Squarer Config */
|
|
#define REG_TX_QUAD_CAL_ATTEN 0x0AC /* TX Quad Cal Atten */
|
|
#define REG_THRESH_ACCUM 0x0AD /* Thresh Accum */
|
|
#define REG_TX_QUAD_LPF_GAIN 0x0AE /* Tx Quad LPF Gain */
|
|
#define REG_TXDAC_VDS_I 0x0B0 /* TxDAC Vds I */
|
|
#define REG_TXDAC_VDS_Q 0x0B1 /* TxDAC Vds Q */
|
|
#define REG_TXDAC_GN_I 0x0B2 /* TxDAC gn I */
|
|
#define REG_TXDAC_GN_Q 0x0B3 /* TxDAC gn Q */
|
|
#define REG_TXBBF_OPAMP_A 0x0C0 /* TxBBF OpAmp A */
|
|
#define REG_TXBBF_OPAMP_B 0x0C1 /* TxBBF OpAmp B */
|
|
#define REG_TX_BBF_R1 0x0C2 /* Tx BBF R1 */
|
|
#define REG_TX_BBF_R2 0x0C3 /* Tx BBF R2 */
|
|
#define REG_TX_BBF_R3 0x0C4 /* Tx BBF R3 */
|
|
#define REG_TX_BBF_R4 0x0C5 /* Tx BBF R4 */
|
|
#define REG_TX_BBF_RP 0x0C6 /* Tx BBF RP */
|
|
#define REG_TX_BBF_C1 0x0C7 /* Tx BBF C1 */
|
|
#define REG_TX_BBF_C2 0x0C8 /* Tx BBF C2 */
|
|
#define REG_TX_BBF_CP 0x0C9 /* Tx BBF Cp */
|
|
#define REG_TX_TUNE_CTRL 0x0CA /* Tx Tune Control */
|
|
#define REG_TX_BBF_R2B 0x0CB /* Tx BBF R2b */
|
|
#define REG_TX_BBF_TUNE 0x0CC /* Tx BBF Tune */
|
|
#define REG_CONFIG0 0x0D0 /* Config0 */
|
|
#define REG_RESISTOR 0x0D1 /* Resistor */
|
|
#define REG_CAPACITOR 0x0D2 /* Capacitor */
|
|
#define REG_LO_CM 0x0D3 /* LO CM */
|
|
#define REG_TX_BBF_TUNE_DIVIDER 0x0D6 /* TX BBF Tune Divider */
|
|
#define REG_TX_BBF_TUNE_MODE 0x0D7 /* TX BBF Tune Mode */
|
|
#define REG_RX_FILTER_COEF_ADDR 0x0F0 /* Rx Filter Coeff Addr */
|
|
#define REG_RX_FILTER_COEF_DATA_1 0x0F1 /* Rx Filter Coeff Data 1 */
|
|
#define REG_RX_FILTER_COEF_DATA_2 0x0F2 /* Rx Filter Coeff Data 2 */
|
|
#define REG_RX_FILTER_COEF_READ_DATA_1 0x0F3 /* Rx Filter Coeff Read Data 1 */
|
|
#define REG_RX_FILTER_COEF_READ_DATA_2 0x0F4 /* Rx Filter Coeff Read Data 2 */
|
|
#define REG_RX_FILTER_CONFIG 0x0F5 /* Rx Filter Config */
|
|
#define REG_RX_FILTER_GAIN 0x0F6 /* Rx Filter Gain */
|
|
#define REG_AGC_CONFIG_1 0x0FA /* AGC Config1 */
|
|
#define REG_AGC_CONFIG_2 0x0FB /* AGC config2 */
|
|
#define REG_AGC_CONFIG_3 0x0FC /* AGC Config3 */
|
|
#define REG_MAX_LMT_FULL_GAIN 0x0FD /* Max LMT/Full Gain */
|
|
#define REG_PEAK_WAIT_TIME 0x0FE /* Peak Wait Time */
|
|
#define REG_DIGITAL_GAIN 0x100 /* Digital Gain */
|
|
#define REG_AGC_LOCK_LEVEL 0x101 /* AGC Lock Level */
|
|
#define REG_ADC_NOISE_CORRECTION_FACTOR 0x102 /* ADC noise Correction Factor */
|
|
#define REG_GAIN_STP_CONFIG1 0x103 /* Gain Step Config1 */
|
|
#define REG_ADC_SMALL_OVERLOAD_THRESH 0x104 /* ADC Small Overload Threshold */
|
|
#define REG_ADC_LARGE_OVERLOAD_THRESH 0x105 /* ADC Large Overload Threshold */
|
|
#define REG_GAIN_STP_CONFIG_2 0x106 /* Gain Step Config 2 */
|
|
#define REG_SMALL_LMT_OVERLOAD_THRESH 0x107 /* Small LMT Overload Threshold */
|
|
#define REG_LARGE_LMT_OVERLOAD_THRESH 0x108 /* Large LMT Overload Threshold */
|
|
#define REG_RX1_MANUAL_LMT_FULL_GAIN 0x109 /* Rx1 Manual LMT/Full Gain */
|
|
#define REG_RX1_MANUAL_LPF_GAIN 0x10A /* Rx1 Manual LPF gain */
|
|
#define REG_RX1_MANUAL_DIGITALFORCED_GAIN 0x10B /* Rx1 Manual Digital/Forced Gain */
|
|
#define REG_RX2_MANUAL_LMT_FULL_GAIN 0x10C /* Rx2 Manual LMT/Full Gain */
|
|
#define REG_RX2_MANUAL_LPF_GAIN 0x10D /* Rx2 Manual LPF Gain */
|
|
#define REG_RX2_MANUAL_DIGITALFORCED_GAIN 0x10E /* Rx2 Manual Digital/Forced Gain */
|
|
#define REG_FAST_CONFIG_1 0x110 /* Config 1 */
|
|
#define REG_FAST_CONFIG_2_SETTLING_DELAY 0x111 /* Config 2 & Settling Delay */
|
|
#define REG_FAST_ENERGY_LOST_THRESH 0x112 /* Energy Lost Threshold */
|
|
#define REG_FAST_STRONGER_SIGNAL_THRESH 0x113 /* Stronger Signal Threshold */
|
|
#define REG_FAST_LOW_POWER_THRESH 0x114 /* Low Power Threshold */
|
|
#define REG_FAST_STRONG_SIGNAL_FREEZE 0x115 /* Strong Signal Freeze */
|
|
#define REG_FAST_FINAL_OVER_RANGE_AND_OPT_GAIN 0x116 /* Final Over Range and Opt Gain */
|
|
#define REG_FAST_ENERGY_DETECT_COUNT 0x117 /* Energy Detect Count */
|
|
#define REG_FAST_AGCLL_UPPER_LIMIT 0x118 /* AGCLL Upper Limit */
|
|
#define REG_FAST_GAIN_LOCK_EXIT_COUNT 0x119 /* Gain Lock Exit Count */
|
|
#define REG_FAST_INITIAL_LMT_GAIN_LIMIT 0x11A /* Initial LMT Gain Limit */
|
|
#define REG_FAST_INCREMENT_TIME 0x11B /* Increment Time */
|
|
#define REG_AGC_INNER_LOW_THRESH 0x120 /* AGC Inner Low Threshold */
|
|
#define REG_LMT_OVERLOAD_COUNTERS 0x121 /* LMT Overload Counters */
|
|
#define REG_ADC_OVERLOAD_COUNTERS 0x122 /* ADC Overload Counters */
|
|
#define REG_GAIN_STP1 0x123 /* Gain Step1 */
|
|
#define REG_GAIN_UPDATE_COUNTER1 0x124 /* Gain Update Counter1 */
|
|
#define REG_GAIN_UPDATE_COUNTER2 0x125 /* Gain Update Counter2 */
|
|
#define REG_DIGITAL_SAT_COUNTER 0x128 /* Digital Sat Counter */
|
|
#define REG_OUTER_POWER_THRESHS 0x129 /* Outer Power Thresholds */
|
|
#define REG_GAIN_STP_2 0x12A /* Gain Step 2 */
|
|
#define REG_EXT_LNA_HIGH_GAIN 0x12C /* Ext LNA High Gain */
|
|
#define REG_EXT_LNA_LOW_GAIN 0x12D /* Ext LNA Low Gain */
|
|
#define REG_GAIN_TABLE_ADDRESS 0x130 /* Gain Table Address */
|
|
#define REG_GAIN_TABLE_WRITE_DATA1 0x131 /* Gain Table Write Data1 */
|
|
#define REG_GAIN_TABLE_WRITE_DATA2 0x132 /* Gain Table Write Data2 */
|
|
#define REG_GAIN_TABLE_WRITE_DATA3 0x133 /* Gain Table Write Data 3 */
|
|
#define REG_GAIN_TABLE_READ_DATA1 0x134 /* Gain Table Read Data 1 */
|
|
#define REG_GAIN_TABLE_READ_DATA2 0x135 /* Gain Table Read Data 2 */
|
|
#define REG_GAIN_TABLE_READ_DATA3 0x136 /* Gain Table Read Data 3 */
|
|
#define REG_GAIN_TABLE_CONFIG 0x137 /* Gain Table Config */
|
|
#define REG_GM_SUB_TABLE_ADDRESS 0x138 /* Gm Sub Table Address */
|
|
#define REG_GM_SUB_TABLE_GAIN_WRITE 0x139 /* Gm Sub Table Gain Word Write */
|
|
#define REG_GM_SUB_TABLE_BIAS_WRITE 0x13A /* Gm Sub Table Bias Word Write */
|
|
#define REG_GM_SUB_TABLE_CTRL_WRITE 0x13B /* Gm Sub Table Control Word Write */
|
|
#define REG_GM_SUB_TABLE_GAIN_READ 0x13C /* Gm Sub Table Gain Word Read */
|
|
#define REG_GM_SUB_TABLE_BIAS_READ 0x13D /* Gm Sub Table Bias Word Read */
|
|
#define REG_GM_SUB_TABLE_CTRL_READ 0x13E /* Gm Sub Table Control Word Read */
|
|
#define REG_GM_SUB_TABLE_CONFIG 0x13F /* Gm Sub Table Config */
|
|
#define REG_WORD_ADDRESS 0x140 /* Word Address */
|
|
#define REG_GAIN_DIFF_WORDERROR_WRITE 0x141 /* Gain Diff Word/Error Write */
|
|
#define REG_GAIN_ERROR_READ 0x142 /* Gain Error Read */
|
|
#define REG_CONFIG 0x143 /* Config */
|
|
#define REG_LNA_GAIN_DIFF_READ_BACK 0x144 /* LNA Gain Diff Read Back */
|
|
#define REG_MAX_MIXER_CALIBRATION_GAIN_INDEX 0x145 /* Max Mixer Calibration Gain Index */
|
|
#define REG_TEMP_GAIN_COEF 0x146 /* Temp Gain Coefficient */
|
|
#define REG_SETTLE_TIME 0x147 /* Settle Time */
|
|
#define REG_MEASURE_DURATION 0x148 /* Measure Duration */
|
|
#define REG_CAL_TEMP_SENSOR_WORD 0x149 /* Cal Temp sensor word */
|
|
#define REG_MEASURE_DURATION_01 0x150 /* Measure Duration 0&1 */
|
|
#define REG_MEASURE_DURATION_23 0x151 /* Measure Duration 2&3 */
|
|
#define REG_RSSI_WEIGHT_0 0x152 /* RSSI Weight 0 */
|
|
#define REG_RSSI_WEIGHT_1 0x153 /* RSSI Weight 1 */
|
|
#define REG_RSSI_WEIGHT_2 0x154 /* RSSI Weight 2 */
|
|
#define REG_RSSI_WEIGHT_3 0x155 /* RSSI Weight 3 */
|
|
#define REG_RSSI_DELAY 0x156 /* RSSI delay */
|
|
#define REG_RSSI_WAIT_TIME 0x157 /* RSSI wait time */
|
|
#define REG_RSSI_CONFIG 0x158 /* RSSI Config */
|
|
#define REG_ADC_MEASURE_DURATION_01 0x159 /* ADC Measure Duration 0&1 */
|
|
#define REG_ADC_WEIGHT_0 0x15A /* ADC Weight 0 */
|
|
#define REG_ADC_WEIGHT_1 0x15B /* ADC Weight 1 */
|
|
#define REG_DEC_POWER_MEASURE_DURATION_0 0x15C /* Dec Power Measure Duration 0 */
|
|
#define REG_LNA_GAIN 0x15D /* LNA Gain */
|
|
#define REG_CH1_ADC_POWER 0x160 /* CH1 ADC Power */
|
|
#define REG_CH1_RX_FILTER_POWER 0x161 /* CH1 Rx filter Power */
|
|
#define REG_CH2_ADC_POWER 0x162 /* CH2 ADC Power */
|
|
#define REG_CH2_RX_FILTER_POWER 0x163 /* CH2 Rx filter Power */
|
|
#define REG_RX_QUAD_CAL_LEVEL 0x168 /* Rx Quad Cal Level */
|
|
#define REG_CALIBRATION_CONFIG_1 0x169 /* Calibration Config 1 */
|
|
#define REG_CALIBRATION_CONFIG_2 0x16A /* Calibration config2 */
|
|
#define REG_CALIBRATION_CONFIG_3 0x16B /* Calibration config3 */
|
|
#define REG_CALIB_COUNT 0x16C /* Calib count */
|
|
#define REG_SETTLE_COUNT 0x16D /* Settle count */
|
|
#define REG_RX_QUAD_GAIN1 0x16E /* Rx Quad gain1 */
|
|
#define REG_RX_QUAD_GAIN2 0x16F /* Rx Quad gain2 */
|
|
#define REG_RX1_INPUT_A_PHASE_CORR 0x170 /* Rx1 Input A Phase Corr */
|
|
#define REG_RX1_INPUT_A_GAIN_CORR 0x171 /* Rx1 Input A Gain Corr */
|
|
#define REG_RX2_INPUT_A_PHASE_CORR 0x172 /* Rx2 Input A Phase Corr */
|
|
#define REG_RX2_INPUT_A_GAIN_CORR 0x173 /* Rx2 Input A Gain Corr */
|
|
#define REG_RX1_INPUT_A_Q_OFFSET 0x174 /* Rx1 Input A Q" Offset */
|
|
#define REG_RX1_INPUT_A_OFFSETS 0x175 /* Rx1 Input A Offsets */
|
|
#define REG_INPUT_A_OFFSETS_1 0x176 /* Input A Offsets 1 */
|
|
#define REG_RX2_INPUT_A_OFFSETS 0x177 /* Rx2 Input A Offsets */
|
|
#define REG_RX2_INPUT_A_I_OFFSET 0x178 /* Rx2 Input A "I" Offset */
|
|
#define REG_RX1_INPUT_BC_PHASE_CORR 0x179 /* Rx1 Input B&C Phase Corr */
|
|
#define REG_RX1_INPUT_BC_GAIN_CORR 0x17A /* Rx1 Input B&C Gain Corr */
|
|
#define REG_RX2_INPUT_BC_PHASE_CORR 0x17B /* Rx2 Input B&C Phase Corr */
|
|
#define REG_RX2_INPUT_BC_GAIN_CORR 0x17C /* Rx2 Input B&C Gain Corr */
|
|
#define REG_RX1_INPUT_BC_Q_OFFSET 0x17D /* Rx1 Input B&C "Q" Offset */
|
|
#define REG_RX1_INPUT_BC_OFFSETS 0x17E /* Rx1 Input B&C Offsets */
|
|
#define REG_INPUT_BC_OFFSETS_1 0x17F /* Input B&C Offsets 1 */
|
|
#define REG_RX2_INPUT_BC_OFFSETS 0x180 /* Rx2 Input B&C Offsets */
|
|
#define REG_RX2_INPUT_BC_I_OFFSET 0x181 /* Rx2 Input B&C "I" Offset */
|
|
#define REG_FORCE_BITS 0x182 /* Force Bits */
|
|
#define REG_WAIT_COUNT 0x185 /* Wait Count */
|
|
#define REG_RF_DC_OFFSET_COUNT 0x186 /* RF DC Offset Count */
|
|
#define REG_RF_DC_OFFSET_CONFIG_1 0x187 /* RF DC Offset Config1 */
|
|
#define REG_RF_DC_OFFSET_ATTEN 0x188 /* RF DC Offset Attenuation */
|
|
#define REG_INVERT_BITS 0x189 /* Invert Bits */
|
|
#define REG_DC_OFFSET_CONFIG2 0x18B /* DC Offset Config2 */
|
|
#define REG_RF_CAL_GAIN_INDEX 0x18C /* RF Cal Gain Index */
|
|
#define REG_SOI_THRESH 0x18D /* SOI Threshold */
|
|
#define REG_BB_DC_OFFSET_SHIFT 0x190 /* BB DC Offset Shift */
|
|
#define REG_BB_DC_OFFSET_FAST_SETTLE_SHIFT 0x191 /* BB DC Offset Fast Settle Shift */
|
|
#define REG_BB_FAST_SETTLE_DUR 0x192 /* BB Fast Settle Dur */
|
|
#define REG_BB_DC_OFFSET_COUNT 0x193 /* BB DC Offset Count */
|
|
#define REG_BB_DC_OFFSET_ATTEN 0x194 /* BB DC Offset Attenuation */
|
|
#define REG_RX1_BB_DC_WORD_I_MSB 0x19A /* RX1 BB DC word I MSB */
|
|
#define REG_RX1_BB_DC_WORD_I_LSB 0x19B /* RX1 BB DC word I LSB */
|
|
#define REG_RX1_BB_DC_WORD_Q_MSB 0x19C /* RX1 BB DC word Q MSB */
|
|
#define REG_RX1_BB_DC_WORD_Q_LSB 0x19D /* RX1 BB DC word Q LSB */
|
|
#define REG_RX2_BB_DC_WORD_I_MSB 0x19E /* RX2 BB DC word I MSB */
|
|
#define REG_RX2_BB_DC_WORD_I_LSB 0x19F /* RX2 BB DC word I LSB */
|
|
#define REG_RX2_BB_DC_WORD_Q_MSB 0x1A0 /* RX2 BB DC word Q MSB */
|
|
#define REG_RX2_BB_DC_WORD_Q_LSB 0x1A1 /* RX2 BB DC word Q LSB */
|
|
#define REG_BB_TRACK_CORR_WORD_I_MSB 0x1A2 /* BB Track corr word I MSB */
|
|
#define REG_BB_TRACK_CORR_WORD_I_LSB 0x1A3 /* BB Track corr word I LSB */
|
|
#define REG_BB_TRACK_CORR_WORD_Q_MSB 0x1A4 /* BB Track corr word Q MSB */
|
|
#define REG_BB_TRACK_CORR_WORD_Q_LSB 0x1A5 /* BB Track corr word Q LSB */
|
|
#define REG_RX1_RSSI_SYMBOL 0x1A7 /* Rx1 RSSI Symbol */
|
|
#define REG_RX1_RSSI_PREAMBLE 0x1A8 /* Rx1 RSSI preamble */
|
|
#define REG_RX2_RSSI_SYMBOL 0x1A9 /* Rx2 RSSI symbol */
|
|
#define REG_RX2_RSSI_PREAMBLE 0x1AA /* Rx2 RSSI preamble */
|
|
#define REG_SYMBOL_LSB 0x1AB /* Symbol LSB */
|
|
#define REG_PREAMBLE_LSB 0x1AC /* Preamble LSB */
|
|
#define REG_RX_PATH_GAIN_MSB 0x1AD /* Rx Path Gain */
|
|
#define REG_RX_PATH_GAIN_LSB 0x1AE /* Rx Path Gain */
|
|
#define REG_RX_DIFF_LNA_FORCE 0x1B0 /* Rx Diff LNA Force */
|
|
#define REG_RX_LNA_BIAS_COARSE 0x1B1 /* Rx LNA Bias Coarse */
|
|
#define REG_RX_LNA_BIAS_FINE_0 0x1B2 /* Rx LNA Bias Fine 0 */
|
|
#define REG_RX_LNA_BIAS_FINE_1 0x1B3 /* Rx LNA Bias Fine 1 */
|
|
#define REG_RX_MIX_GM_CONFIG 0x1C0 /* Rx Mix Gm Config */
|
|
#define REG_RX1_MIX_GM_FORCE 0x1C1 /* Rx1 Mix Gm Force */
|
|
#define REG_RX1_MIX_GM_BIAS_FORCE 0x1C2 /* Rx1 Mix Gm Bias (Force) */
|
|
#define REG_RX2_MIX_GM_FORCE 0x1C3 /* Rx2 Mix Gm Force */
|
|
#define REG_RX2_MIX_GM_BIAS_FORCE 0x1C4 /* Rx2 Mix Gm Bias (Force) */
|
|
#define REG_INPUT_A_MSBS 0x1C8 /* Input A MSBs */
|
|
#define REG_INPUT_A_RX1_I 0x1C9 /* Input A RX1 I */
|
|
#define REG_INPUT_A_RX1_Q 0x1CA /* Input A RX1 Q */
|
|
#define REG_INPUT_A_RX2_I 0x1CB /* Input A RX2 I */
|
|
#define REG_INPUT_A_RX2_Q 0x1CC /* Input A RX2 Q */
|
|
#define REG_INPUTS_BC_RX1_I 0x1CD /* Inputs B&C RX1 I */
|
|
#define REG_BAND1_RX1_Q 0x1CE /* Band1 RX1 Q */
|
|
#define REG_INPUTS_BC_RX2_I 0x1CF /* Inputs B&C RX2 I */
|
|
#define REG_INPUTS_BC_RX2_Q 0x1D0 /* Inputs B&C RX2 Q */
|
|
#define REG_INPUTS_BC_MSBS 0x1D1 /* Inputs B&C MSBs */
|
|
#define REG_FORCE_OS_DAC 0x1D2 /* Force OS DAC */
|
|
#define REG_RX_MIX_LO_CM 0x1D5 /* Rx Mix LO CM */
|
|
#define REG_RX_CGB_SEG_ENABLE 0x1D6 /* Rx CGB Seg Enable */
|
|
#define REG_RX_MIX_INPUTBIAS 0x1D7 /* Rx Mix Input/Bias */
|
|
#define REG_RX_TIA_CONFIG 0x1DB /* Rx TIA Config */
|
|
#define REG_TIA1_C_LSB 0x1DC /* TIA1 C LSB */
|
|
#define REG_TIA1_C_MSB 0x1DD /* TIA1 C MSB */
|
|
#define REG_TIA2_C_LSB 0x1DE /* TIA2 C LSB */
|
|
#define REG_TIA2_C_MSB 0x1DF /* TIA2 C MSB */
|
|
#define REG_RX1_BBF_R1A 0x1E0 /* Rx1 BBF R1A */
|
|
#define REG_RX2_BBF_R1A 0x1E1 /* Rx2 BBF R1A */
|
|
#define REG_RX1_TUNE_CTRL 0x1E2 /* Rx1 Tune Control */
|
|
#define REG_RX2_TUNE_CTRL 0x1E3 /* Rx2 Tune Control */
|
|
#define REG_RX1_BBF_R5 0x1E4 /* Rx1 BBF R5 */
|
|
#define REG_RX2_BBF_R5 0x1E5 /* Rx2 BBF R5 */
|
|
#define REG_RX_BBF_R2346 0x1E6 /* Rx BBF R2346 */
|
|
#define REG_RX_BBF_C1_MSB 0x1E7 /* Rx BBF C1 MSB */
|
|
#define REG_RX_BBF_C1_LSB 0x1E8 /* Rx BBF C1 LSB */
|
|
#define REG_RX_BBF_C2_MSB 0x1E9 /* Rx BBF C2 MSB */
|
|
#define REG_RX_BBF_C2_LSB 0x1EA /* Rx BBF C2 LSB */
|
|
#define REG_RX_BBF_C3_MSB 0x1EB /* Rx BBF C3 MSB */
|
|
#define REG_RX_BBF_C3_LSB 0x1EC /* Rx BBF C3 LSB */
|
|
#define REG_RX_BBF_CC1_CTR 0x1ED /* Rx BBF CC1 Ctr */
|
|
#define REG_RX_BBF_POW_RZ_BYTE0 0x1EE /* Rx BBF Pow Rz Byte0 */
|
|
#define REG_RX_BBF_CC2_CTR 0x1EF /* Rx BBF CC2 Ctr */
|
|
#define REG_RX_BBF_POW_RZ_BYTE1 0x1F0 /* Rx BBF Pow Rz Byte1 */
|
|
#define REG_RX_BBF_CC3_CTR 0x1F1 /* Rx BBF CC3 Ctr */
|
|
#define REG_RX_BBF_R5_TUNE 0x1F2 /* Rx BBF R5 Tune */
|
|
#define REG_RX_BBF_TUNE 0x1F3 /* Rx BBF Tune */
|
|
#define REG_RX1_BBF_MAN_GAIN 0x1F4 /* Rx1 BBF Man Gain */
|
|
#define REG_RX2_BBF_MAN_GAIN 0x1F5 /* Rx2 BBF Man Gain */
|
|
#define REG_RX_BBF_TUNE_DIVIDE 0x1F8 /* RX BBF Tune Divide */
|
|
#define REG_RX_BBF_TUNE_CONFIG 0x1F9 /* RX BBF Tune Config */
|
|
#define REG_POLE_GAIN 0x1FA /* Pole gain */
|
|
#define REG_RX_BBBW_MHZ 0x1FB /* Rx BBBW MHz */
|
|
#define REG_RX_BBBW_KHZ 0x1FC /* Rx BBBW kHz */
|
|
#define REG_FB_DAC_CLK_DELAY1 0x201 /* FB DAC Clk Delay1 */
|
|
#define REG_FB_DAC_CLK_DELAY2 0x202 /* FB DAC Clk Delay2 */
|
|
#define REG_FLASH_SAMPLE_CLK_DELAY_3P 0x203 /* Flash Sample Clk Delay 3p */
|
|
#define REG_FLASH_SAMPLE_CLK_DELAY_3N 0x204 /* Flash Sample Clk Delay 3n */
|
|
#define REG_TEST_MUX_2I 0x205 /* Test MUX 2i */
|
|
#define REG_TEST_MUX_2Q 0x206 /* Test MUX 2q */
|
|
#define REG_INTEGRATOR_1_RESISTANCE 0x207 /* Integrator 1 Resistance */
|
|
#define REG_INTEGRATOR_1_CAPACITANCE 0x208 /* Integrator 1 Capacitance */
|
|
#define REG_INTEGRATOR_23_RESISTANCE 0x209 /* Integrator 23 Resistance */
|
|
#define REG_INTEGRATOR_2_RESISTANCE 0x20A /* Integrator 2 Resistance */
|
|
#define REG_INTEGRATOR_2_CAPACITANCE 0x20B /* Integrator 2 Capacitance */
|
|
#define REG_INTEGRATOR_3_RESISTANCE 0x20C /* Integrator 3 Resistance */
|
|
#define REG_INTEGRATOR_3_CAPACITANCE 0x20D /* Integrator 3 Capacitance */
|
|
#define REG_INTEGRATOR_AMP_CC 0x20E /* Integrator Amp Cc */
|
|
#define REG_INT_1_FB_DAC_NMOS_CURRENT_SOURCE 0x20F /* Int 1 FB DAC NMOS Current Source */
|
|
#define REG_INT_1_FB_DAC_NMOS_CASOADE_BIAS_CURRENT 0x210 /* Int 1 FB DAC NMOS Casoade Bias Current */
|
|
#define REG_INT_1_FB_DAC_PMOS_CURRENT_SOURCE 0x211 /* Int 1 FB DAC PMOS Current Source */
|
|
#define REG_INT_2_FB_DAC_NMOS_CURRENT_SOURCE 0x212 /* Int 2 FB DAC NMOS Current Source */
|
|
#define REG_INT_2_FB_DAC_NMOS_CASCODE_BIAS_CURRENT 0x213 /* Int 2 FB DAC NMOS Cascode Bias Current */
|
|
#define REG_INT_2_FB_DAC_PMOS_CURRENT_SOURCE 0x214 /* Int 2 FB DAC PMOS Current Source */
|
|
#define REG_INT_3_FB_DAC_NMOS_CURRENT_SOURCE 0x215 /* Int 3 FB DAC NMOS Current Source */
|
|
#define REG_INT_3_FB_DAC_NMOS_CASCODE_BIAS_CURRENT 0x216 /* Int 3 FB DAC NMOS Cascode Bias Current */
|
|
#define REG_INT_3_FB_DAC_PMOS_CURRENT_SOURCE 0x217 /* Int 3 FB DAC PMOS Current Source */
|
|
#define REG_FB_DAC_BIAS_CURRENT 0x218 /* FB DAC Bias Current */
|
|
#define REG_INT_1_1ST_STAGE_CURRENT 0x219 /* Int 1 1st Stage Current */
|
|
#define REG_INT_1_1ST_STAGE_CASCODE_CURRENT 0x21A /* Int 1 1st Stage Cascode Current */
|
|
#define REG_INT_1_2ND_STAGE_CURRENT 0x21B /* Int 1 2nd Stage Current */
|
|
#define REG_INTEGRATOR_2_1ST_STAGE_CURRENT 0x21C /* Integrator 2 1st Stage Current */
|
|
#define REG_INT_2_1ST_STAGE_CASCODE_CURRENT 0x21D /* Int 2 1st Stage Cascode Current */
|
|
#define REG_INT_2_2ND_STAGE_CURRENT 0x21E /* Int 2 2nd Stage Current */
|
|
#define REG_INT_3_1ST_STAGE_CURRENT 0x21F /* Int 3 1st Stage Current */
|
|
#define REG_INT_3_1ST_STAGE_CASCODE_CURRENT 0x220 /* Int 3 1st Stage Cascode Current */
|
|
#define REG_INT_3_2ND_STAGE_CURRENT 0x221 /* Int 3 2nd Stage Current */
|
|
#define REG_FLASH_BIAS_CURRENT 0x222 /* Flash Bias Current */
|
|
#define REG_FLASH_LADDER_BIAS 0x223 /* Flash Ladder Bias */
|
|
#define REG_FLASH_LADDER_CASCODE_CURRENT 0x224 /* Flash Ladder Cascode Current */
|
|
#define REG_FLASH_LADDER_BIAS2 0x225 /* Flash Ladder Bias2 */
|
|
#define REG_RESET 0x226 /* Reset */
|
|
#define REG_RX_PFD_CONFIG 0x230 /* RX PFD Config */
|
|
#define REG_RX_INTEGER_BYTE_0 0x231 /* RX Integer Byte 0 */
|
|
#define REG_RX_INTEGER_BYTE_1 0x232 /* RX Integer Byte 1 */
|
|
#define REG_RX_FRACT_BYTE_0 0x233 /* RX Fractional Byte 0 */
|
|
#define REG_RX_FRACT_BYTE_1 0x234 /* RX Fractional Byte 1 */
|
|
#define REG_RX_FRACT_BYTE_2 0x235 /* RX Fractional Byte 2 */
|
|
#define REG_RX_FORCE_ALC 0x236 /* RX Force ALC */
|
|
#define REG_RX_FORCE_VCO_TUNE_0 0x237 /* RX Force VCO Tune 0 */
|
|
#define REG_RX_FORCE_VCO_TUNE_1 0x238 /* RX Force VCO Tune 1 */
|
|
#define REG_RX_ALC_VARACTOR 0x239 /* RX ALC/Varactor */
|
|
#define REG_RX_VCO_OUTPUT 0x23A /* RX VCO Output */
|
|
#define REG_RX_CP_CURRENT 0x23B /* RX CP Current */
|
|
#define REG_RX_CP_OFFSET 0x23C /* RX CP Offset */
|
|
#define REG_RX_CP_CONFIG 0x23D /* RX CP Config */
|
|
#define REG_RX_LOOP_FILTER_1 0x23E /* RX Loop Filter 1 */
|
|
#define REG_RX_LOOP_FILTER_2 0x23F /* RX Loop Filter 2 */
|
|
#define REG_RX_LOOP_FILTER_3 0x240 /* RX Loop Filter 3 */
|
|
#define REG_RX_DITHERCP_CAL 0x241 /* RX Dither/CP Cal */
|
|
#define REG_RX_VCO_BIAS_1 0x242 /* RX VCO Bias 1 */
|
|
#define REG_RX_CAL_STATUS 0x244 /* RX Cal Status */
|
|
#define REG_RX_VCO_CAL_REF 0x245 /* RX VCO Cal Ref */
|
|
#define REG_RX_VCO_PD_OVERRIDES 0x246 /* RX VCO Pd Overrides */
|
|
#define REG_RX_CP_OVERRANGE_VCO_LOCK 0x247 /* RX CP Over Range/VCO Lock */
|
|
#define REG_RX_VCO_LDO 0x248 /* RX VCO LDO */
|
|
#define REG_RX_VCO_CAL 0x249 /* RX VCO Cal */
|
|
#define REG_RX_LOCK_DETECT_CONFIG 0x24A /* RX Lock Detect Config */
|
|
#define REG_RX_CP_LEVEL_DETECT 0x24B /* RX CP Level Detect */
|
|
#define REG_RX_DSM_SETUP_0 0x24C /* RX DSM Setup 0 */
|
|
#define REG_RX_DSM_SETUP_1 0x24D /* RX DSM Setup 1 */
|
|
#define REG_RX_CORRECTION_WORD0 0x24E /* RX Correction Word0 */
|
|
#define REG_RX_CORRECTION_WORD1 0x24F /* RX Correction Word1 */
|
|
#define REG_RX_VCO_VARACTOR_CTRL_0 0x250 /* RX VCO Varactor Control 0 */
|
|
#define REG_RX_VCO_VARACTOR_CTRL_1 0x251 /* RX VCO Varactor Control 1 */
|
|
#define REG_RX_FAST_LOCK_SETUP 0x25A /* Rx Fast Lock Setup */
|
|
#define REG_RX_FAST_LOCK_SETUP_INIT_DELAY 0x25B /* Rx Fast Lock Setup Init Delay */
|
|
#define REG_RX_FAST_LOCK_PROGRAM_ADDR 0x25C /* Rx Fast Lock Program Addr */
|
|
#define REG_RX_FAST_LOCK_PROGRAM_DATA 0x25D /* Rx Fast Lock Program Data */
|
|
#define REG_RX_FAST_LOCK_PROGRAM_READ 0x25E /* Rx Fast Lock Program Read */
|
|
#define REG_RX_FAST_LOCK_PROGRAM_CTRL 0x25F /* Rx Fast Lock Program Control */
|
|
#define REG_RX_LO_GEN_POWER_MODE 0x261 /* Rx LO Gen Power Mode */
|
|
#define REG_TX_PFD_CONFIG 0x270 /* TX PFD Config */
|
|
#define REG_TX_INTEGER_BYTE_0 0x271 /* TX Integer Byte 0 */
|
|
#define REG_TX_INTEGER_BYTE_1 0x272 /* TX Integer Byte 1 */
|
|
#define REG_TX_FRACT_BYTE_0 0x273 /* TX Fractional Byte 0 */
|
|
#define REG_TX_FRACT_BYTE_1 0x274 /* TX Fractional Byte 1 */
|
|
#define REG_TX_FRACT_BYTE_2 0x275 /* TX Fractional Byte 2 */
|
|
#define REG_TX_FORCE_ALC 0x276 /* TX Force ALC */
|
|
#define REG_TX_FORCE_VCO_TUNE_0 0x277 /* TX Force VCO Tune 0 */
|
|
#define REG_TX_FORCE_VCO_TUNE_1 0x278 /* TX Force VCO Tune 1 */
|
|
#define REG_TX_ALCVARACT_OR 0x279 /* TX ALC/Varact or */
|
|
#define REG_TX_VCO_OUTPUT 0x27A /* TX VCO Output */
|
|
#define REG_TX_CP_CURRENT 0x27B /* TX CP Current */
|
|
#define REG_TX_CP_OFFSET 0x27C /* TX CP Offset */
|
|
#define REG_TX_CP_CONFIG 0x27D /* TX CP Config */
|
|
#define REG_TX_LOOP_FILTER_1 0x27E /* TX Loop Filter 1 */
|
|
#define REG_TX_LOOP_FILTER_2 0x27F /* TX Loop Filter 2 */
|
|
#define REG_TX_LOOP_FILTER_3 0x280 /* TX Loop Filter 3 */
|
|
#define REG_TX_DITHERCP_CAL 0x281 /* TX Dither/CP Cal */
|
|
#define REG_TX_VCO_BIAS_1 0x282 /* TX VCO Bias 1 */
|
|
#define REG_TX_VCO_BIAS_2 0x283 /* TX VCO Bias 2 */
|
|
#define REG_TX_CAL_STATUS 0x284 /* TX Cal Status */
|
|
#define REG_TX_VCO_CAL_REF 0x285 /* TX VCO Cal Ref */
|
|
#define REG_TX_VCO_PD_OVERRIDES 0x286 /* TX VCO Pd Overrides */
|
|
#define REG_TX_CP_OVERRANGE_VCO_LOCK 0x287 /* TX CP Over Range/VCO Lock */
|
|
#define REG_TX_VCO_LDO 0x288 /* TX VCO LDO */
|
|
#define REG_TX_VCO_CAL 0x289 /* TX VCO Cal */
|
|
#define REG_TX_LOCK_DETECT_CONFIG 0x28A /* TX Lock Detect Config */
|
|
#define REG_TX_CP_LEVEL_DETECT 0x28B /* TX CP Level Detect */
|
|
#define REG_TX_DSM_SETUP_0 0x28C /* TX DSM Setup 0 */
|
|
#define REG_TX_DSM_SETUP_1 0x28D /* TX DSM Setup 1 */
|
|
#define REG_TX_CORRECTION_WORD0 0x28E /* TX Correction Word0 */
|
|
#define REG_TX_CORRECTION_WORD1 0x28F /* TX Correction Word1 */
|
|
#define REG_TX_VCO_VARACTOR_CTRL_0 0x290 /* TX VCO Varactor Control 0 */
|
|
#define REG_TX_VCO_VARACTOR_CTRL_1 0x291 /* TX VCO Varactor Control 1 */
|
|
#define REG_DCXO_COARSE_TUNE 0x292 /* DCXO Coarse Tune */
|
|
#define REG_DCXO_FINE_TUNE_HIGH 0x293 /* DCXO Fine Tune2 */
|
|
#define REG_DCXO_FINE_TUNE_LOW 0x294 /* DCXO Fine Tune1 */
|
|
#define REG_DCXO_CONFIG 0x295 /* DCXO Config */
|
|
#define REG_DCXO_TEMPCO_WRITE 0x296 /* DCXO Tempco Write */
|
|
#define REG_DCXO_TEMPCO_READ 0x297 /* DCXO Tempco Read */
|
|
#define REG_DCXO_TEMPCO_ADDR 0x298 /* DCXO Tempco Addr */
|
|
#define REG_DELTA_T_READ 0x299 /* Delta T Read */
|
|
#define REG_TX_FAST_LOCK_SETUP 0x29A /* Tx Fast Lock Setup */
|
|
#define REG_TX_FAST_LOCK_SETUP_INIT_DELAY 0x29B /* Tx Fast Lock Setup Init Delay */
|
|
#define REG_TX_FAST_LOCK_PROGRAM_ADDR 0x29C /* Tx Fast Lock Program Addr */
|
|
#define REG_TX_FAST_LOCK_PROGRAM_DATA 0x29D /* Tx Fast Lock Program Data */
|
|
#define REG_TX_FAST_LOCK_PROGRAM_READ 0x29E /* Tx Fast Lock Program Read */
|
|
#define REG_TX_FAST_LOCK_PROGRAM_CTRL 0x29F /* Tx Fast Lock Program Ctrl */
|
|
#define REG_TX_LO_GEN_POWER_MODE 0x2A1 /* Tx LO Gen Power Mode */
|
|
#define REG_BANDGAP_CONFIG0 0x2A6 /* Bandgap Config0 */
|
|
#define REG_BANDGAP_CONFIG1 0x2A8 /* Bandgap Config1 */
|
|
#define REG_REF_DIVIDE_CONFIG_1 0x2AB /* Ref Divide Config 1 */
|
|
#define REG_REF_DIVIDE_CONFIG_2 0x2AC /* Ref Divide Config 2 */
|
|
#define REG_GAIN_RX1 0x2B0 /* Gain Rx1 */
|
|
#define REG_LPF_GAIN_RX1 0x2B1 /* LPF Gain Rx1 */
|
|
#define REG_DIG_GAIN_RX1 0x2B2 /* Dig gain Rx1 */
|
|
#define REG_FAST_ATTACK_STATE 0x2B3 /* Fast Attack State */
|
|
#define REG_SLOW_LOOP_STATE 0x2B4 /* Slow Loop State */
|
|
#define REG_GAIN_RX2 0x2B5 /* Gain Rx2 */
|
|
#define REG_LPF_GAIN_RX2 0x2B6 /* LPF Gain Rx2 */
|
|
#define REG_DIG_GAIN_RX2 0x2B7 /* Dig Gain Rx2 */
|
|
#define REG_OVRG_SIGS_RX1 0x2B8 /* Ovrg Sigs Rx1 */
|
|
#define REG_OVRG_SIGS_RX2 0x2B9 /* Ovrg Sigs Rx2 */
|
|
#define REG_CTRL 0x3DF /* Control */
|
|
#define REG_BIST_CONFIG 0x3F4 /* BIST Config */
|
|
#define REG_OBSERVE_CONFIG 0x3F5 /* Observe Config */
|
|
#define REG_BIST_AND_DATA_PORT_TEST_CONFIG 0x3F6 /* BIST and Data Port Test Config */
|
|
#define REG_DAC_TEST_0 0x3FC /* DAC Test 0 */
|
|
#define REG_DAC_TEST_1 0x3FD /* DAC Test 1 */
|
|
#define REG_DAC_TEST_2 0x3FE /* DAC Test 2 */
|
|
|
|
/*
|
|
* REG_SPI_CONF
|
|
*/
|
|
#define SOFT_RESET (1 << 7) /* Soft Reset */
|
|
#define WIRE3_SPI (1 << 6) /* 3-Wire SPI */
|
|
#define LSB_FIRST (1 << 5) /* LSB First */
|
|
#define _LSB_FIRST (1 << 2) /* LSB First */
|
|
#define _WIRE3_SPI (1 << 1) /* 3-Wire SPI */
|
|
#define _SOFT_RESET (1 << 0) /* Soft reset */
|
|
|
|
/*
|
|
* REG_MULTICHIP_SYNC_AND_TX_MON_CTRL
|
|
*/
|
|
#define TX2_MONITOR_ENABLE (1 << 6) /* Tx2 Monitor Enable */
|
|
#define TX1_MONITOR_ENABLE (1 << 5) /* Tx1 Monitor Enable */
|
|
#define MCS_RF_ENABLE (1 << 3) /* MCS RF Enable */
|
|
#define MCS_BBPLL_ENABLE (1 << 2) /* MCS BBPLL enable */
|
|
#define MCS_DIGITAL_CLK_ENABLE (1 << 1) /* MCS Digital CLK Enable */
|
|
#define MCS_BB_ENABLE (1 << 0) /* MCS BB Enable */
|
|
|
|
/*
|
|
* REG_TX_ENABLE_FILTER_CTRL
|
|
*/
|
|
#define THB2_EN (1 << 3) /* THB2 Enable */
|
|
#define THB1_EN (1 << 2) /* THB1 Enable */
|
|
#define TX_CHANNEL_ENABLE(x) (((x) & 0x3) << 6) /* Tx channel Enable<1:0> */
|
|
#define THB3_ENABLE_INTERP(x) (((x) & 0x3) << 4) /* THB3 Enable & Interp<1:0> */
|
|
#define TX_FIR_ENABLE_INTERPOLATION(x) (((x) & 0x3) << 0) /* Tx FIR Enable & Interpolation<1:0> */
|
|
#define TX_1 1
|
|
#define TX_2 2
|
|
#define TX_ENABLE 1
|
|
#define TX_DISABLE 0
|
|
|
|
/*
|
|
* REG_RX_ENABLE_FILTER_CTRL
|
|
*/
|
|
#define RHB2_EN (1 << 3) /* RHB2 Enable */
|
|
#define RHB1_EN (1 << 2) /* RHB1 Enable */
|
|
#define RX_CHANNEL_ENABLE(x) (((x) & 0x3) << 6) /* Rx channel Enable<1:0> */
|
|
#define DEC3_ENABLE_DECIMATION(x) (((x) & 0x3) << 4) /* DEC3 Enable & Decimation<1:0> */
|
|
#define RX_FIR_ENABLE_DECIMATION(x) (((x) & 0x3) << 0) /* Rx FIR Enable & Decimation<1:0> */
|
|
#define RX_1 1
|
|
#define RX_2 2
|
|
#define RX_ENABLE 1
|
|
#define RX_DISABLE 0
|
|
|
|
/*
|
|
* REG_INPUT_SELECT
|
|
*/
|
|
#define TX_OUTPUT (1 << 6) /* TX Output */
|
|
#define RX_INPUT(x) (((x) & 0x3F) << 0) /* RX Input <5:0> */
|
|
|
|
/*
|
|
* REG_RFPLL_DIVIDERS
|
|
*/
|
|
#define TX_VCO_DIVIDER(x) (((x) & 0xF) << 4) /* TX VCO Divider<3:0> */
|
|
#define RX_VCO_DIVIDER(x) (((x) & 0xF) << 0) /* RX VCO Divider<3:0> */
|
|
|
|
/*
|
|
* REG_RX_CLOCK_DATA_DELAY
|
|
*/
|
|
#define DATA_CLK_DELAY(x) (((x) & 0xF) << 4) /* DATA_CLK Delay<3:0> */
|
|
#define RX_DATA_DELAY(x) (((x) & 0xF) << 0) /* Rx Data Delay <3:0> */
|
|
|
|
/*
|
|
* REG_TX_CLOCK_DATA_DELAY
|
|
*/
|
|
#define FB_CLK_DELAY(x) (((x) & 0xF) << 4) /* FB_CLK Delay<3:0> */
|
|
#define TX_DATA_DELAY(x) (((x) & 0xF) << 0) /* Tx Data Delay <3:0> */
|
|
|
|
/*
|
|
* REG_CLOCK_ENABLE
|
|
*/
|
|
#define XO_BYPASS (1 << 4) /* XO Bypass */
|
|
#define DIGITAL_POWER_UP (1 << 2) /* Digital Power Up */
|
|
#define CLOCK_ENABLE_DFLT (1 << 1) /* Set to 1 */
|
|
#define BBPLL_ENABLE (1 << 0) /* BBPLL Enable */
|
|
|
|
/*
|
|
* REG_BBPLL
|
|
*/
|
|
#define CLKOUT_ENABLE (1 << 4) /* CLKOUT Enable */
|
|
#define DAC_CLK_DIV2 (1 << 3) /* DAC Clk div2 */
|
|
#define CLKOUT_SELECT(x) (((x) & 0x7) << 5) /* CLKOUT Select<2:0> */
|
|
#define BBPLL_DIVIDER(x) (((x) & 0x7) << 0) /* BBPLL Divider <2:0> */
|
|
|
|
/*
|
|
* REG_START_TEMP_READING
|
|
*/
|
|
#define START_TEMP_READING (1 << 0) /* Start Temp Reading */
|
|
|
|
/*
|
|
* REG_TEMP_SENSE2
|
|
*/
|
|
#define TEMP_SENSE_PERIODIC_ENABLE (1 << 0) /* Temp Sense Periodic Enable */
|
|
#define MEASUREMENT_TIME_INTERVAL(x) (((x) & 0x7F) << 1) /* Measurement Time Interval<6:0> */
|
|
|
|
/*
|
|
* REG_TEMP_SENSOR_CONFIG
|
|
*/
|
|
#define TEMP_SENSOR_DECIMATION(x) (((x) & 0x7) << 0) /* Temp Sensor Decimation<2:0> */
|
|
|
|
/*
|
|
* REG_PARALLEL_PORT_CONF_1
|
|
*/
|
|
#define PP_TX_SWAP_IQ (1 << 7) /* PP Tx Swap IQ */
|
|
#define PP_RX_SWAP_IQ (1 << 6) /* PP Rx Swap IQ */
|
|
#define TX_CHANNEL_SWAP (1 << 5) /* Tx Channel swap */
|
|
#define RX_CHANNEL_SWAP (1 << 4) /* Rx Channel swap */
|
|
#define RX_FRAME_PULSE_MODE (1 << 3) /* Rx Frame Pulse Mode */
|
|
#define R2T2_TIMING (1 << 2) /* 2R2T Timing */
|
|
#define INVERT_DATA_BUS (1 << 1) /* Invert data bus */
|
|
#define INVERT_DATA_CLK (1 << 0) /* Invert DATA CLK */
|
|
|
|
/*
|
|
* REG_PARALLEL_PORT_CONF_2
|
|
*/
|
|
#define FDD_ALT_WORD_ORDER (1 << 7) /* FDD Alt Word Order */
|
|
#define INVERT_RX1 (1 << 6) /* Invert Rx1 */
|
|
#define INVERT_RX2 (1 << 5) /* Invert Rx2 */
|
|
#define INVERT_TX1 (1 << 4) /* Invert Tx1 */
|
|
#define INVERT_TX2 (1 << 3) /* Invert Tx2 */
|
|
#define INVERT_RX_FRAME (1 << 2) /* Invert Rx Frame */
|
|
#define DELAY_RX_DATA(x) (((x) & 0x3) << 0) /* Delay Rx Data<1:0> */
|
|
|
|
/*
|
|
* REG_PARALLEL_PORT_CONF_3
|
|
*/
|
|
#define FDD_RX_RATE_2TX_RATE (1 << 7) /* FDD Rx Rate = 2*Tx Rate */
|
|
#define SWAP_PORTS (1 << 6) /* Swap Ports */
|
|
#define SINGLE_DATA_RATE (1 << 5) /* Single Data Rate */
|
|
#define LVDS_MODE (1 << 4) /* LVDS Mode */
|
|
#define HALF_DUPLEX_MODE (1 << 3) /* Half Duplex Mode */
|
|
#define SINGLE_PORT_MODE (1 << 2) /* Single Port Mode */
|
|
#define FULL_PORT (1 << 1) /* Full Port */
|
|
#define FULL_DUPLEX_SWAP_BITS (1 << 0) /* Full Duplex Swap Bits */
|
|
|
|
/*
|
|
* REG_ENSM_MODE
|
|
*/
|
|
#define FDD_MODE (1 << 0) /* FDD Mode */
|
|
|
|
/*
|
|
* REG_ENSM_CONFIG_1
|
|
*/
|
|
#define ENABLE_RX_DATA_PORT_FOR_CAL (1 << 7) /* Enable Rx Data Port for Cal */
|
|
#define FORCE_RX_ON (1 << 6) /* Force Rx On */
|
|
#define FORCE_TX_ON (1 << 5) /* Force Tx On */
|
|
#define ENABLE_ENSM_PIN_CTRL (1 << 4) /* Enable ENSM Pin Control */
|
|
#define LEVEL_MODE (1 << 3) /* Level Mode */
|
|
#define FORCE_ALERT_STATE (1 << 2) /* Force Alert State */
|
|
#define AUTO_GAIN_LOCK (1 << 1) /* Auto Gain Lock */
|
|
#define TO_ALERT (1 << 0) /* To Alert */
|
|
|
|
/*
|
|
* REG_ENSM_CONFIG_2
|
|
*/
|
|
#define FDD_EXTERNAL_CTRL_ENABLE (1 << 7) /* FDD External Control Enable */
|
|
#define POWER_DOWN_RX_SYNTH (1 << 6) /* Power Down Rx Synth */
|
|
#define POWER_DOWN_TX_SYNTH (1 << 5) /* Power Down Tx Synth */
|
|
#define TXNRX_SPI_CTRL (1 << 4) /* TXNRX SPI Control */
|
|
#define SYNTH_ENABLE_PIN_CTRL_MODE (1 << 3) /* Synth Enable Pin Control Mode */
|
|
#define DUAL_SYNTH_MODE (1 << 2) /* Dual Synth Mode */
|
|
#define RX_SYNTH_READY_MASK (1 << 1) /* Rx Synth Ready Mask */
|
|
#define TX_SYNTH_READY_MASK (1 << 0) /* Tx Synth Ready Mask */
|
|
|
|
/*
|
|
* REG_CALIBRATION_CTRL
|
|
*/
|
|
#define RX_BB_TUNE_CAL (1 << 7) /* Rx BB Tune */
|
|
#define TX_BB_TUNE_CAL (1 << 6) /* Tx BB Tune */
|
|
#define RX_QUAD_CAL (1 << 5) /* Rx Quad Cal */
|
|
#define TX_QUAD_CAL (1 << 4) /* Tx Quad Cal */
|
|
#define RX_GAIN_STEP_CAL (1 << 3) /* Rx Gain Step Cal */
|
|
#define TXMON_CAL (1 << 2)
|
|
#define RFDC_CAL (1 << 1) /* DC Cal RF Start */
|
|
#define BBDC_CAL (1 << 0) /* DC cal BB Start */
|
|
|
|
|
|
/*
|
|
* REG_STATE
|
|
*/
|
|
#define CALIBRATION_SEQUENCE_STATE(x) (((x) & 0xF) << 4) /* Calibration Sequence State<3:0> */
|
|
#define ENSM_STATE(x) (((x) & 0xF) << 0) /* ENSM State<3:0> */
|
|
#define ENSM_STATE_SLEEP_WAIT 0x0
|
|
#define ENSM_STATE_ALERT 0x5
|
|
#define ENSM_STATE_TX 0x6
|
|
#define ENSM_STATE_TX_FLUSH 0x7
|
|
#define ENSM_STATE_RX 0x8
|
|
#define ENSM_STATE_RX_FLUSH 0x9
|
|
#define ENSM_STATE_FDD 0xA
|
|
#define ENSM_STATE_FDD_FLUSH 0xB
|
|
#define ENSM_STATE_INVALID 0xFF
|
|
#define ENSM_STATE_SLEEP 0x80
|
|
|
|
/*
|
|
* REG_AUXDAC_2_WORD
|
|
*/
|
|
#define AUXDAC_2_WORD_MSB(x) (((x) & 0x3F) << 2) /* AuxDAC 2 Word<9:2> */
|
|
#define AUXDAC_1_WORD(x) (((x) & 0x3) << 0) /* AuxDAC 1 Word <1:0> */
|
|
|
|
/*
|
|
* REG_AUXDAC_1_CONFIG
|
|
*/
|
|
#define COMP_CTRL_1 (1 << 5) /* Comp Ctrl 1 */
|
|
#define AUXDAC1_STP_FACTOR (1 << 4) /* AuxDAC1 Step Factor */
|
|
#define AUXDAC_1_VREF(x) (((x) & 0x3) << 2) /* AuxDAC 1 Vref<1:0> */
|
|
#define AUXDAC_1_WORD_LSB(x) (((x) & 0x3) << 0) /* AuxDAC 2 Word <1:0> */
|
|
|
|
/*
|
|
* REG_AUXDAC_2_CONFIG
|
|
*/
|
|
#define COMP_CTRL_2 (1 << 5) /* Comp Ctrl 2 */
|
|
#define AUXDAC2_STP_FACTOR (1 << 4) /* AuxDAC2 Step Factor */
|
|
#define AUXDAC_2_VREF(x) (((x) & 0xF) << 2) /* AuxDAC 2 Vref<1:0> */
|
|
#define AUXDAC_2_WORD_LSB(x) (((x) & 0x3) << 0) /* AuxDAC 2 Word <1:0> */
|
|
|
|
/*
|
|
* REG_AUXADC_CLOCK_DIVIDER
|
|
*/
|
|
#define AUXADC_CLOCK_DIVIDER(x) (((x) & 0x3F) << 0) /* AuxADC Clock Divider<5:0> */
|
|
|
|
/*
|
|
* REG_AUXADC_CONFIG
|
|
*/
|
|
#define AUXADC_POWER_DOWN (1 << 0) /* AuxADC Power Down */
|
|
#define AUX_ADC_DECIMATION(x) (((x) & 0x7) << 1) /* Aux ADC Decimation<2:0> */
|
|
|
|
/*
|
|
* REG_AUXADC_LSB
|
|
*/
|
|
#define AUXADC_WORD_LSB(x) (((x) & 0xF) << 0) /* AuxADC Word LSB<3:0> */
|
|
|
|
/*
|
|
* REG_AUTO_GPO
|
|
*/
|
|
#define GPO_ENABLE_AUTO_RX(x) (((x) & 0xF) << 4) /* GPO Enable Auto Rx<3:0> */
|
|
#define GPO_ENABLE_AUTO_TX(x) (((x) & 0xF) << 0) /* GPO Enable Auto Tx<3:0> */
|
|
|
|
/*
|
|
* REG_AGC_ATTACK_DELAY
|
|
*/
|
|
#define INVERT_BYPASSED_LNA_POLARITY (1 << 6) /* Invert Bypassed LNA Polarity */
|
|
#define AGC_ATTACK_DELAY(x) (((x) & 0x3F) << 0) /* AGC Attack Delay<5:0> */
|
|
|
|
/*
|
|
* REG_AUXDAC_ENABLE_CTRL
|
|
*/
|
|
#define AUXDAC_MANUAL_BAR(x) (((x) & 0x3) << 6) /* AuxDac Manual Bar<1:0> */
|
|
#define AUXDAC_AUTO_TX_BAR(x) (((x) & 0x3) << 4) /* AuxDAC Auto Tx Bar<1:0> */
|
|
#define AUXDAC_AUTO_RX_BAR(x) (((x) & 0x3) << 2) /* AuxDAC Auto Rx Bar<1:0> */
|
|
#define AUXDAC_INIT_BAR(x) (((x) & 0x3) << 0) /* AuxDAC Init Bar<1:0> */
|
|
|
|
/*
|
|
* REG_EXTERNAL_LNA_CTRL
|
|
*/
|
|
#define AUXDAC_MANUAL_SELECT (1 << 7) /* AuxDAC Manual Select */
|
|
#define EXTERNAL_LNA2_CTRL (1 << 6) /* External LNA2 control */
|
|
#define EXTERNAL_LNA1_CTRL (1 << 5) /* External LNA1 control */
|
|
#define GPO_MANUAL_SELECT (1 << 4) /* GPO manual select */
|
|
#define OPEN(x) (((x) & 0xF) << 0) /* Open<3:0> */
|
|
|
|
/*
|
|
* REG_GPO_FORCE_AND_INIT
|
|
*/
|
|
#define GPO_MANUAL_CTRL(x) (((x) & 0xF) << 4) /* GPO Manual Control<3:0> */
|
|
#define GPO_INIT_STATE(x) (((x) & 0xF) << 0) /* GPO Init State<3:0> */
|
|
|
|
/*
|
|
* REG_CTRL_OUTPUT_ENABLE
|
|
*/
|
|
#define EN_CTRL7 (1 << 7) /* En ctrl7 */
|
|
#define EN_CTRL6 (1 << 6) /* En ctrl6 */
|
|
#define EN_CTRL5 (1 << 5) /* En ctrl5 */
|
|
#define EN_CTRL4 (1 << 4) /* En ctrl4 */
|
|
#define EN_CTRL3 (1 << 3) /* En ctrl3 */
|
|
#define EN_CTRL2 (1 << 2) /* En ctrl2 */
|
|
#define EN_CTRL1 (1 << 1) /* En ctrl1 */
|
|
#define EN_CTRL0 (1 << 0) /* En ctrl0 */
|
|
|
|
/*
|
|
* REG_PRODUCT_ID
|
|
*/
|
|
#define PRODUCT_ID_MASK 0xF8
|
|
#define PRODUCT_ID_9361 0x08
|
|
#define REV_MASK 0x07
|
|
|
|
/*
|
|
* REG_REFERENCE_CLOCK_CYCLES
|
|
*/
|
|
#define REFERENCE_CLOCK_CYCLES_PER_US(x) (((x) & 0x7F) << 0) /* Reference Clock Cycles per us<6:0> */
|
|
|
|
/*
|
|
* REG_DIGITAL_IO_CTRL
|
|
*/
|
|
#define CLK_OUT_DRIVE (1 << 7) /* CLK Out Drive */
|
|
#define DATACLK_DRIVE (1 << 6) /* DATACLK drive */
|
|
#define DATA_PORT_DRIVE (1 << 2) /* Data Port Drive */
|
|
#define DATACLK_SLEW(x) (((x) & 0x3) << 4) /* DATACLK slew <1:0> */
|
|
#define DATA_PORT_SLEW(x) (((x) & 0x3) << 0) /* Data Port Slew<1:0> */
|
|
|
|
/*
|
|
* REG_LVDS_BIAS_CTRL
|
|
*/
|
|
#define RX_ON_CHIP_TERM (1 << 5) /* Rx On Chip Term */
|
|
#define LVDS_BYPASS_BIAS_R (1 << 4) /* Bypass Bias R */
|
|
#define LVDS_TX_LO_VCM (1 << 3) /* LVDS Tx LO VCM */
|
|
#define CLK_OUT_SLEW(x) (((x) & 0x3) << 6) /* CLK Out Slew<1:0> */
|
|
#define LVDS_BIAS(x) (((x) & 0x7) << 0) /* LVDS Bias <2:0> */
|
|
|
|
/*
|
|
* REG_SDM_CTRL_1
|
|
*/
|
|
#define INIT_BB_FO_CAL (1 << 2) /* Init BB FO CAL */
|
|
#define BBPLL_RESET_BAR (1 << 0) /* BBPLL Reset Bar */
|
|
|
|
/*
|
|
* REG_CLOCK_CTRL
|
|
*/
|
|
#define REF_FREQ_SCALER(x) (((x) & 0x3) << 0) /* Ref Frequency Scaler */
|
|
|
|
/*
|
|
* REG_CP_CURRENT
|
|
*/
|
|
#define CHARGE_PUMP_CURRENT(x) (((x) & 0x3F) << 0) /* Charge Pump Current<5:0> */
|
|
|
|
/*
|
|
* REG_CP_BLEED_CURRENT
|
|
*/
|
|
#define MCS_REFCLK_SCALE_EN (1 << 7) /* MCS refclk Scale En */
|
|
|
|
/*
|
|
* REG_LOOP_FILTER_1
|
|
*/
|
|
#define C1_WORD(x) (((x) & 0x7) << 5) /* C1 Word<2:0> */
|
|
#define R1_WORD(x) (((x) & 0x1F) << 0) /* R1 Word<4:0> */
|
|
|
|
/*
|
|
* REG_LOOP_FILTER_2
|
|
*/
|
|
#define R2_WORD (1 << 7) /* R2 Word<0> */
|
|
#define C2_WORD(x) (((x) & 0x1F) << 2) /* C2 Word<4:0> */
|
|
#define C1_WORD_LSB(x) (((x) & 0x3) << 0) /* C1 Word<4:3> */
|
|
|
|
/*
|
|
* REG_LOOP_FILTER_3
|
|
*/
|
|
#define BYPASS_C3 (1 << 7) /* Bypass C3 */
|
|
#define BYPASS_R2 (1 << 6) /* Bypass R2 */
|
|
#define C3_WORD(x) (((x) & 0xF) << 2) /* C3 Word<3:0> */
|
|
#define R2_WORD_LSB(x) (((x) & 0x3) << 0) /* R2 Word<2:1> */
|
|
|
|
/*
|
|
* REG_VCO_CTRL
|
|
*/
|
|
#define FREQ_CAL_ENABLE (1 << 7) /* Freq Cal Enable */
|
|
#define FREQ_CAL_RESET (1 << 4) /* Freq Cal Reset */
|
|
#define FREQ_CAL_COUNT_LENGTH(x) (((x) & 0x3) << 5) /* Freq Cal Count Length<1:0> */
|
|
|
|
/*
|
|
* REG_SDM_CTRL
|
|
*/
|
|
#define CAL_CLOCK_DIV_4 (1 << 4) /* Cal Clock div 4 */
|
|
|
|
/*
|
|
* REG_RX_SYNTH_POWER_DOWN_OVERRIDE
|
|
*/
|
|
#define RX_LO_POWER_DOWN (1 << 4) /* Rx LO Power Down */
|
|
#define RX_SYNTH_VCO_ALC_POWER_DOWN (1 << 3) /* Rx Synth VCO ALC Power Down */
|
|
#define RX_SYNTH_PTAT_POWER_DOWN (1 << 2) /* Rx Synth PTAT Power Down */
|
|
#define RX_SYNTH_VCO_POWER_DOWN (1 << 1) /* Rx Synth VCO Power Down */
|
|
#define RX_SYNTH_VCO_LDO_POWER_DOWN (1 << 0) /* Rx Synth VCO LDO Power Down */
|
|
|
|
/*
|
|
* REG_TX_SYNTH_POWER_DOWN_OVERRIDE
|
|
*/
|
|
#define TX_LO_POWER_DOWN (1 << 4) /* Tx LO Power Down */
|
|
#define TX_SYNTH_VCO_ALC_POWER_DOWN (1 << 3) /* Tx Synth VCO ALC Power Down */
|
|
#define TX_SYNTH_PTAT_POWER_DOWN (1 << 2) /* Tx Synth PTAT Power Down */
|
|
#define TX_SYNTH_VCO_POWER_DOWN (1 << 1) /* Tx Synth VCO Power Down */
|
|
#define TX_SYNTH_VCO_LDO_POWER_DOWN (1 << 0) /* Tx Synth VCO LDO Power Down */
|
|
|
|
/*
|
|
* REG_RX_ANALOG_POWER_DOWN_OVERRIDE_1
|
|
*/
|
|
#define RX_OFFSET_DAC_CGIN_POWER_DOWN(x) (((x) & 0x3) << 6) /* Rx Offset DAC CGin Power Down<1:0> */
|
|
#define RX_LMT_OVERLOAD_POWER_DOWN(x) (((x) & 0x3) << 4) /* Rx LMT Overload Power Down<1:0> */
|
|
#define RX_MIXER_GM_POWER_DOWN(x) (((x) & 0x3) << 2) /* Rx Mixer Gm Power Down<1:0> */
|
|
#define RX_CGB_POWER_DOWN(x) (((x) & 0x3) << 0) /* Rx CGB Power Down<1:0> */
|
|
|
|
/*
|
|
* REG_RX_ANALOG_POWER_DOWN_OVERRIDE_2
|
|
*/
|
|
#define RX_BBF_POWER_DOWN(x) (((x) & 0x3) << 6) /* Rx BBF Power Down<1:0> */
|
|
#define RX_TIA_POWER_DOWN(x) (((x) & 0x3) << 4) /* Rx TIA Power Down<1:0> */
|
|
#define RX_MIXER_POWER_DOWN(x) (((x) & 0x3) << 2) /* Rx Mixer Power Down<1:0> */
|
|
#define RX_OFFSET_DAC_CGOUT_POWER_DOWN(x) (((x) & 0x3) << 0) /* Rx Offset DAC CGOut Power Down<1:0> */
|
|
|
|
/*
|
|
* REG_TX_ANALOG_POWER_DOWN_OVERRIDE_1
|
|
*/
|
|
#define TX_SECONDARY_FILTER_POWER_DOWN(x) (((x) & 0x3) << 6) /* Tx Secondary Filter Power Down<1:0> */
|
|
#define TX_BBF_POWER_DOWN(x) (((x) & 0x3) << 4) /* Tx BBF Power Down<1:0> */
|
|
#define TX_DAC_POWER_DOWN(x) (((x) & 0x3) << 2) /* Tx DAC Power Down<1:0> */
|
|
#define TX_DAC_BIAS_POWER_DOWN(x) (((x) & 0x3) << 0) /* Tx DAC Bias Power Down<1:0> */
|
|
|
|
/*
|
|
* REG_ANALOG_POWER_DOWN_OVERRIDE
|
|
*/
|
|
#define RX_EXT_VCO_BUFFER_POWER_DOWN (1 << 5) /* Rx Ext VCO Buffer Power Down */
|
|
#define TX_EXT_VCO_BUFFER_POWER_DOWN (1 << 4) /* Tx Ext VCO Buffer Power Down */
|
|
#define TX_MONITOR_POWER_DOWN(x) (((x) & 0x3) << 2) /* Tx Monitor Power Down<1:0> */
|
|
#define TX_UPCONVERTER_POWER_DOWN(x) (((x) & 0x3) << 0) /* Tx Upconverter Power Down<1:0> */
|
|
|
|
/*
|
|
* REG_MISC_POWER_DOWN_OVERRIDE
|
|
*/
|
|
#define RX_LNA_POWER_DOWN (1 << 6) /* Rx LNA Power Down */
|
|
#define DCXO_POWER_DOWN (1 << 1) /* DCXO Power Down */
|
|
#define MASTER_BIAS_POWER_DOWN (1 << 0) /* Master Bias Power Down */
|
|
#define RX_CALIBRATION_POWER_DOWN(x) (((x) & 0x3) << 2) /* Rx Calibration Power Down<1:0> */
|
|
|
|
/*
|
|
* REG_CH_1_OVERFLOW
|
|
*/
|
|
#define BBPLL_LOCK (1 << 7) /* BBPLL Lock */
|
|
#define CH_1_INT3 (1 << 6) /* CH 1 INT3 */
|
|
#define CH1_HB3 (1 << 5) /* CH1 HB3 */
|
|
#define CH1_HB2 (1 << 4) /* CH1 HB2 */
|
|
#define CH1_QEC (1 << 3) /* CH1 QEC */
|
|
#define CH1_HB1 (1 << 2) /* CH1 HB1 */
|
|
#define CH1_TFIR (1 << 1) /* CH1 TFIR */
|
|
#define CH1_RFIR (1 << 0) /* CH1 RFIR */
|
|
|
|
/*
|
|
* REG_CH_2_OVERFLOW
|
|
*/
|
|
#define CH2_INT3 (1 << 6) /* CH2 INT3 */
|
|
#define CH2_HB3 (1 << 5) /* CH2 HB3 */
|
|
#define CH2_HB2 (1 << 4) /* CH2 HB2 */
|
|
#define CH2_QEC (1 << 3) /* CH2 QEC */
|
|
#define CH2_HB1 (1 << 2) /* CH2 HB1 */
|
|
#define CH2_TFIR (1 << 1) /* CH2 TFIR */
|
|
#define CH2_RFIR (1 << 0) /* CH2 RFIR */
|
|
|
|
/*
|
|
* REG_TX_FILTER_CONF
|
|
*/
|
|
#define TX_FIR_GAIN_6DB (1 << 0) /* Filter Gain */
|
|
#define FIR_START_CLK (1 << 1) /* Start Tx/Rx Clock */
|
|
#define FIR_WRITE (1 << 2) /* Write Tx/Rx */
|
|
#define FIR_SELECT(x) (((x) & 0x3) << 3) /* Select Tx/Rx CH<1:0> */
|
|
#define FIR_NUM_TAPS(x) (((x) & 0x7) << 5) /* Number of Taps<2:0> */
|
|
|
|
/*
|
|
* REG_TX_MON_LOW_GAIN
|
|
*/
|
|
#define TX_MON_TRACK (1 << 5) /* Tx Mon Track */
|
|
#define TX_MON_LOW_GAIN(x) (((x) & 0x1F) << 0) /* Tx Mon Low Gain<4:0> */
|
|
|
|
/*
|
|
* REG_TX_MON_HIGH_GAIN
|
|
*/
|
|
#define TX_MON_HIGH_GAIN(x) (((x) & 0x1F) << 0) /* Tx Mon High Gain<4:0> */
|
|
|
|
/*
|
|
* REG_TX_LEVEL_THRESH
|
|
*/
|
|
#define TX_LEVEL_THRESH(x) (((x) & 0x3F) << 2) /* Tx Level Threshold<5:0> */
|
|
#define TX_MON_DELAY_COUNTER(x) (((x) & 0x3) << 0) /* Tx Mon Delay Counter<9:8> */
|
|
|
|
/*
|
|
* REG_TX_RSSI_LSB
|
|
*/
|
|
#define TX_RSSI_2 (1 << 1) /* Tx RSSI 2<0> */
|
|
#define TX_RSSI_1 (1 << 0) /* TX RSSI 1<0> */
|
|
|
|
/*
|
|
* REG_TPM_MODE_ENABLE
|
|
*/
|
|
#define TX2_MON_ENABLE (1 << 7) /* Tx2 Monitor Enable */
|
|
#define TX1_MON_ENABLE (1 << 5) /* Tx1 Monitor Enable */
|
|
#define ONE_SHOT_MODE (1 << 6) /* One Shot Mode */
|
|
#define TX_MON_DURATION(x) (((x) & 0xF) << 0) /* Tx Mon Duration<3:0> */
|
|
|
|
/*
|
|
* REG_TX_MON_1_CONFIG
|
|
*/
|
|
#define TX_MON_1_LO_CM(x) (((x) & 0x3F) << 2) /* Tx Mon 1 LO CM<5:0> */
|
|
#define TX_MON_1_GAIN(x) (((x) & 0x3) << 0) /* Tx Mon 1 Gain<1:0> */
|
|
|
|
/*
|
|
* REG_TX_MON_2_CONFIG
|
|
*/
|
|
#define TX_MON_2_LO_CM(x) (((x) & 0x3F) << 2) /* Tx Mon 2 LO CM<5:0> */
|
|
#define TX_MON_2_GAIN(x) (((x) & 0x3) << 0) /* Tx Mon 2 Gain<1:0> */
|
|
|
|
/*
|
|
* REG_TX1_ATTEN_1
|
|
*/
|
|
#define TX_1_ATTEN (1 << 0) /* Tx 1 Atten <8> */
|
|
|
|
/*
|
|
* REG_TX2_ATTEN_1
|
|
*/
|
|
#define TX_2_ATTEN (1 << 0) /* Tx 2 Atten <8> */
|
|
|
|
/*
|
|
* REG_TX_ATTEN_OFFSET
|
|
*/
|
|
#define MASK_CLR_ATTEN_UPDATE (1 << 6) /* Mask Clr Atten Update */
|
|
#define TX_ATTEN_OFFSET(x) (((x) & 0x3F) << 0) /* Tx Atten Offset<5:0> */
|
|
|
|
/*
|
|
* REG_TX1_DIG_ATTEN
|
|
*/
|
|
#define SEL_TX1_TX2 (1 << 6) /* Sel Tx1 & Ttx2 */
|
|
|
|
/*
|
|
* REG_TX2_DIG_ATTEN
|
|
*/
|
|
#define IMMEDIATELY_UPDATE_TPC_ATTEN (1 << 6) /* Immediately Update TPC Atten */
|
|
|
|
/*
|
|
* REG_TX1_SYMBOL_ATTEN
|
|
*/
|
|
#define TX_1_SYMBOL_ATTEN(x) (((x) & 0x7F) << 0) /* Tx 1 Symbol Attenuation<6:0> */
|
|
|
|
/*
|
|
* REG_TX2_SYMBOL_ATTEN
|
|
*/
|
|
#define TX_2_SYMBOL_ATTEN(x) (((x) & 0x7F) << 0) /* Tx 2 Symbol Attenuation<6:0> */
|
|
|
|
/*
|
|
* REG_TX_SYMBOL_ATTEN_CONFIG
|
|
*/
|
|
#define USE_TX1_PIN_SYMBOL_ATTEN (1 << 3) /* Use Tx1 Pin & Symbol Atten */
|
|
#define USE_CTRL_IN_FOR_SYMBOL_ATTEN (1 << 1) /* Use CTRL IN for symbol Atten */
|
|
#define ENABLE_SYMBOL_ATTEN (1 << 0) /* Enable Symbol Atten */
|
|
|
|
/*
|
|
* REG_TX_FORCE_BITS
|
|
*/
|
|
#define FORCE_OUT_2_TX2_OFFSET (1 << 7) /* Force Out 2 Tx2 Offset */
|
|
#define FORCE_OUT_2_TX1_OFFSET (1 << 6) /* Force Out 2 Tx1 Offset */
|
|
#define FORCE_OUT_2_TX2_PHASE_GAIN (1 << 5) /* Force Out 2 Tx2 Phase & Gain */
|
|
#define FORCE_OUT_2_TX1_PHASE_GAIN (1 << 4) /* Force Out 2 Tx1 Phase & Gain */
|
|
#define FORCE_OUT_1_TX2_OFFSET (1 << 3) /* Force Out 1 Tx2 Offset */
|
|
#define FORCE_OUT_1_TX1_OFFSET (1 << 2) /* Force Out 1 Tx1 Offset */
|
|
#define FORCE_OUT_1_TX2_PHASE_GAIN (1 << 1) /* Force Out 1 Tx2 Phase & Gain */
|
|
#define FORCE_OUT_1_TX1_PHASE_GAIN (1 << 0) /* Force Out 1 Tx1 Phase & Gain */
|
|
|
|
/*
|
|
* REG_QUAD_CAL_NCO_FREQ_PHASE_OFFSET
|
|
*/
|
|
#define RX_NCO_FREQ(x) (((x) & 0x3) << 5) /* Rx NCO Frequency<1:0> */
|
|
#define RX_NCO_PHASE_OFFSET(x) (((x) & 0x1F) << 0) /* Rx NCO Phase Offset<4:0> */
|
|
|
|
/*
|
|
* REG_QUAD_CAL_CTRL
|
|
*/
|
|
#define FREE_RUN_ENABLE (1 << 7) /* Free Run Enable */
|
|
#define SETTLE_MAIN_ENABLE (1 << 6) /* Settle Main Enable */
|
|
#define DC_OFFSET_ENABLE (1 << 5) /* DC Offset Enable */
|
|
#define GAIN_ENABLE (1 << 4) /* Gain Enable */
|
|
#define PHASE_ENABLE (1 << 3) /* Phase Enable */
|
|
#define QUAD_CAL_SOFT_RESET (1 << 2) /* Quad Cal Soft Reset */
|
|
#define M_DECIM(x) (((x) & 0x3) << 0) /* M<1:0> */
|
|
|
|
/*
|
|
* REG_KEXP_1
|
|
*/
|
|
#define KEXP_TX(x) (((x) & 0x3) << 6) /* Kexp Tx<1:0> */
|
|
#define KEXP_TX_COMP(x) (((x) & 0x3) << 4) /* Kexp Tx_comp <1:0> */
|
|
#define KEXP_DC_I(x) (((x) & 0x3) << 2) /* Kexp DC I <1:0> */
|
|
#define KEXP_DC_Q(x) (((x) & 0x3) << 0) /* Kexp DC Q <1:0> */
|
|
|
|
/*
|
|
* REG_KEXP_2
|
|
*/
|
|
#define INVERT_I_DATA (1 << 5) /* Invert I data */
|
|
#define INVERT_Q_DATA (1 << 4) /* Invert Q data */
|
|
#define TX_NCO_FREQ(x) (((x) & 0x3) << 6) /* Tx NCO frequency<1:0> */
|
|
#define KEXP_PHASE(x) (((x) & 0x3) << 2) /* Kexp Phase <1:0> */
|
|
#define KEXP_AMP(x) (((x) & 0x3) << 0) /* Kexp Amp <1:0> */
|
|
|
|
/*
|
|
* REG_QUAD_CAL_STATUS_TX1
|
|
*/
|
|
#define TX1_LO_CONV (1 << 1) /* Tx1 LO Conv */
|
|
#define TX1_SSB_CONV (1 << 0) /* Tx1 SSB Conv */
|
|
#define TX1_CONVERGENCE_COUNT(x) (((x) & 0x3F) << 2) /* Tx1 Convergence Count<5:0> */
|
|
|
|
/*
|
|
* REG_QUAD_CAL_STATUS_TX2
|
|
*/
|
|
#define TX2_LO_CONV (1 << 1) /* Tx2 LO Conv */
|
|
#define TX2_SSB_CONV (1 << 0) /* Tx2 SSB Conv */
|
|
#define TX2_CONVERGENCE_COUNT(x) (((x) & 0x3F) << 2) /* Tx2 Convergence Count<5:0> */
|
|
|
|
/*
|
|
* REG_TX_QUAD_FULL_LMT_GAIN
|
|
*/
|
|
#define RX_FULL_TABLELMT_TABLE_GAIN(x) (((x) & 0x7F) << 0) /* RX Full table/LMT table gain<6:0> */
|
|
|
|
/*
|
|
* REG_SQUARER_CONFIG
|
|
*/
|
|
#define GM_STAGE_TIME_CON_OVERRIDE (1 << 5) /* Gm Stage Time Con Override */
|
|
#define GM_STAGE_MV_HP_POLE (1 << 4) /* Gm Stage MV HP Pole */
|
|
#define GM_STAGE_LOWER_CM (1 << 3) /* Gm Stage Lower CM */
|
|
#define BYPASS_BIAS_R (1 << 0) /* Bypass Bias R */
|
|
#define VBIAS_CTRL(x) (((x) & 0x3) << 1) /* Vbias Control<1:0> */
|
|
|
|
/*
|
|
* REG_THRESH_ACCUM
|
|
*/
|
|
#define THRESH_ACCUMULATOR(x) (((x) & 0xF) << 0) /* Threshold Accumulator<3:0> */
|
|
|
|
/*
|
|
* REG_TX_QUAD_LPF_GAIN
|
|
*/
|
|
#define RX_LPF_GAIN(x) (((x) & 0x1F) << 0) /* RX LPF gain<4:0> */
|
|
|
|
/*
|
|
* REG_TXDAC_VDS_I
|
|
*/
|
|
#define TXDAC_VDS_I(x) (((x) & 0x3F) << 0) /* TxDAC Vds I<5:0> */
|
|
|
|
/*
|
|
* REG_TXDAC_VDS_Q
|
|
*/
|
|
#define TXDAC_VDS_Q(x) (((x) & 0x3F) << 0) /* TxDAC Vds Q<5:0> */
|
|
|
|
/*
|
|
* REG_TXDAC_GN_I
|
|
*/
|
|
#define TXDAC_GN_I(x) (((x) & 0x3F) << 0) /* txDAC_gn_I<5:0> */
|
|
|
|
/*
|
|
* REG_TXDAC_GN_Q
|
|
*/
|
|
#define TXDAC_GN_Q(x) (((x) & 0x3F) << 0) /* txDAC_gn_Q<5:0> */
|
|
|
|
/*
|
|
* REG_TXBBF_OPAMP_A
|
|
*/
|
|
#define OPAMPA_OUTPUT_BIAS(x) (((x) & 0x3) << 5) /* OpAmpA Output Bias<1:0> */
|
|
#define OPAMPA_RZ(x) (((x) & 0x3) << 3) /* OpAmpA RZ<1:0> */
|
|
#define OPAMP_A_CC(x) (((x) & 0x7) << 0) /* OpAmp A CC<2:0> */
|
|
|
|
/*
|
|
* REG_TXBBF_OPAMP_B
|
|
*/
|
|
#define OPAMPB_OUTPUT_BIAS(x) (((x) & 0x3) << 5) /* OpAmpB Output Bias<1:0> */
|
|
#define OPAMPB_RZ(x) (((x) & 0x3) << 3) /* OpAmpB RZ<1:0> */
|
|
#define OPAMP_B_CC(x) (((x) & 0x7) << 0) /* OpAmp B CC<2:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_R1
|
|
*/
|
|
#define OVERRIDE_ENABLE (1 << 7) /* Override enable */
|
|
#define R1(x) (((x) & 0x1F) << 0) /* R1<4:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_R2
|
|
*/
|
|
#define R2(x) (((x) & 0x1F) << 0) /* R2<4:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_R3
|
|
*/
|
|
#define R3(x) (((x) & 0x1F) << 0) /* R3<4:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_R4
|
|
*/
|
|
#define R4(x) (((x) & 0x1F) << 0) /* R4<4:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_RP
|
|
*/
|
|
#define RP(x) (((x) & 0x1F) << 0) /* Rp<4:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_C1
|
|
*/
|
|
#define C1(x) (((x) & 0x3F) << 0) /* C1<5:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_C2
|
|
*/
|
|
#define C2(x) (((x) & 0x3F) << 0) /* C2<5:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_CP
|
|
*/
|
|
#define CP(x) (((x) & 0x3F) << 0) /* Cp<5:0> */
|
|
|
|
/*
|
|
* REG_TX_TUNE_CTRL
|
|
*/
|
|
#define PD_TUNE (1 << 2) /* PD Tune */
|
|
#define TUNER_RESAMPLE (1 << 1) /* Tuner Resample */
|
|
#define TUNER_RESAMPLE_PHASE (1 << 0) /* Tuner Resample Phase */
|
|
#define TUNE_CTRL(x) (((x) & 0x3) << 5) /* Tune Control<1:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_R2B
|
|
*/
|
|
#define TX_BBF_BYPASS_BIAS_R (1 << 7) /* Bypass Bias R */
|
|
#define R2B_OVR (1 << 5) /* R2b Ovr */
|
|
#define R2B(x) (((x) & 0x1F) << 0) /* R2b<4:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_TUNE
|
|
*/
|
|
#define BBF1_COMP_I (1 << 3) /* BBF1 Comp I */
|
|
#define BBF1_COMP_Q (1 << 2) /* BBF1 Comp Q */
|
|
#define BBF2_COMP_I (1 << 1) /* BBF2 Comp I */
|
|
#define BBF2_COMP_Q (1 << 0) /* BBF2 Comp Q */
|
|
|
|
/*
|
|
* REG_CONFIG0
|
|
*/
|
|
#define BIAS(x) (((x) & 0x3) << 6) /* Bias<1:0> */
|
|
#define RGM(x) (((x) & 0x3) << 4) /* Rgm<1:0> */
|
|
#define CC(x) (((x) & 0x3) << 2) /* Cc<1:0> */
|
|
#define AMPBIAS(x) (((x) & 0x3) << 0) /* AmpBias<1:0> */
|
|
|
|
/*
|
|
* REG_RESISTOR
|
|
*/
|
|
#define RESISTOR(x) (((x) & 0xF) << 0) /* Resistor<3:0> */
|
|
|
|
/*
|
|
* REG_CAPACITOR
|
|
*/
|
|
#define CAPACITOR(x) (((x) & 0x3F) << 0) /* Capacitor<5:0> */
|
|
|
|
/*
|
|
* REG_LO_CM
|
|
*/
|
|
#define LO_COMMON_MODE(x) (((x) & 0x3) << 5) /* LO Common Mode<1:0> */
|
|
|
|
/*
|
|
* REG_TX_BBF_TUNE_MODE
|
|
*/
|
|
#define EVALTIME (1 << 4) /* EvalTime */
|
|
#define TX_BBF_TUNE_DIVIDER (1 << 0) /* TX BBF Tune Divider<8> */
|
|
#define TUNE_COMP_MASK(x) (((x) & 0x3) << 5) /* Tune Comp Mask<1:0> */
|
|
#define TUNER_MODE(x) (((x) & 0x7) << 1) /* Tuner Mode<2:0> */
|
|
|
|
/*
|
|
* REG_RX_FILTER_CONFIG
|
|
*/
|
|
#define WRITE_RX (1 << 2) /* Write Rx */
|
|
#define START_RX_CLOCK (1 << 1) /* Start Rx Clock */
|
|
#define NUMBER_OF_TAPS(x) (((x) & 0x7) << 5) /* Number of Taps */
|
|
#define SELECT_RX_CH(x) (((x) & 0x3) << 3) /* Select Rx Ch<1:0> */
|
|
|
|
/*
|
|
* REG_RX_FILTER_GAIN
|
|
*/
|
|
#define FILTER_GAIN(x) (((x) & 0x3) << 0) /* Filter gain<1:0> */
|
|
|
|
/*
|
|
* REG_AGC_CONFIG_1
|
|
*/
|
|
#define DEC_PWR_FOR_LOW_PWR (1 << 7) /* Dec Pwr for Low Pwr */
|
|
#define DEC_PWR_FOR_LOCK_LEVEL (1 << 6) /* Dec Pwr for Lock Level */
|
|
#define DEC_PWR_FOR_GAIN_LOCK_EXIT (1 << 5) /* Dec Pwr for Gain Lock Exit */
|
|
#define SLOW_ATTACK_HYBRID_MODE (1 << 4) /* Slow Attack Hybrid Mode */
|
|
#define RX2_GAIN_CTRL_SETUP(x) (((x) & 0x3) << 2) /* Rx 2 Gain Control Setup<1:0> */
|
|
#define RX1_GAIN_CTRL_SETUP(x) (((x) & 0x3) << 0) /* Rx 1 Gain Control Setup<1:0> */
|
|
#define RX_GAIN_CTL_MASK 0x03
|
|
#define RX2_GAIN_CTRL_SHIFT 2
|
|
#define RX1_GAIN_CTRL_SHIFT 0
|
|
#define RX_GAIN_CTL_MGC 0x00
|
|
#define RX_GAIN_CTL_AGC_FAST_ATK 0x01
|
|
#define RX_GAIN_CTL_AGC_SLOW_ATK 0x02
|
|
#define RX_GAIN_CTL_AGC_SLOW_ATK_HYBD 0x03
|
|
|
|
/*
|
|
* REG_AGC_CONFIG_2
|
|
*/
|
|
#define AGC_SOFT_RESET (1 << 7) /* Soft Reset */
|
|
#define AGC_GAIN_UNLOCK_CTRL (1 << 6) /* Gain Unlock Control */
|
|
#define AGC_USE_FULL_GAIN_TABLE (1 << 3) /* Use Full Gain Table */
|
|
#define DIG_GAIN_EN (1 << 2) /* Enable Digital Gain */
|
|
#define MAN_GAIN_CTRL_RX2 (1 << 1) /* Manual Gain Control Rx 2 */
|
|
#define MAN_GAIN_CTRL_RX1 (1 << 0) /* Manual Gain Control Rx 1 */
|
|
|
|
/*
|
|
* REG_AGC_CONFIG_3
|
|
*/
|
|
#define INCDEC_LMT_GAIN (1 << 4) /* Inc/Dec LMT Gain */
|
|
#define USE_AGC_FOR_LMTLPF_GAIN (1 << 3) /* Use AGC for LMT/LPF Gain */
|
|
#define MANUAL_INCR_STEP_SIZE(x) (((x) & 0x7) << 5) /* Manual (CTRL_IN) Incr Gain Step Size<2:0> */
|
|
#define ADC_OVERRANGE_SAMPLE_SIZE(x) (((x) & 0x7) << 0) /* ADC Overrange Sample Size<2:0> */
|
|
|
|
/*
|
|
* REG_MAX_LMT_FULL_GAIN
|
|
*/
|
|
#define MAXIMUM_FULL_TABLELMT_TABLE_INDEX(x) (((x) & 0x7F) << 0) /* Maximum Full Table/LMT Table Index<6:0> */
|
|
|
|
/*
|
|
* REG_PEAK_WAIT_TIME
|
|
*/
|
|
#define MANUAL_CTRL_IN_DECR_GAIN_STP_SIZE(x) (((x) & 0x7) << 5) /* Manual (CTRL_IN) Decr Gain Step Size<2:0> */
|
|
#define PEAK_OVERLOAD_WAIT_TIME(x) (((x) & 0x1F) << 0) /* Peak Overload Wait Time<4:0> */
|
|
|
|
/*
|
|
* REG_DIGITAL_GAIN
|
|
*/
|
|
#define DIG_GAIN_STP_SIZE(x) (((x) & 0x7) << 5) /* Dig Gain Step Size<2:0> */
|
|
#define MAXIMUM_DIGITAL_GAIN(x) (((x) & 0x1F) << 0) /* Maximum Digital Gain<4:0> */
|
|
|
|
/*
|
|
* REG_AGC_LOCK_LEVEL
|
|
*/
|
|
#define ENABLE_DIG_SAT_OVRG (1 << 7) /* Enable Dig Sat Ovrg */
|
|
#define AGC_LOCK_LEVEL_FAST_AGC_INNER_HIGH_THRESH_SLOW(x) (((x) & 0x7F) << 0) /* AGC Lock Level (Fast)/ AGC Inner High Threshold (Slow) <6:0> */
|
|
|
|
/*
|
|
* REG_GAIN_STP_CONFIG1
|
|
*/
|
|
#define LMT_DETECTOR_SETTLING_TIME(x) (((x) & 0x7) << 5) /* LMT Detector Settling Time<2:0> */
|
|
#define DEC_STP_SIZE_FOR_LARGE_LMT_OVERLOAD(x) (((x) & 0x7) << 2) /* Dec Step Size for: Large LMT Overload/ Full Table Case #3 <2:0> */
|
|
#define ADC_NOISE_CORRECTION_FACTOR(x) (((x) & 0x3) << 0) /* ADC Noise Correction Factor<1:0> */
|
|
|
|
/*
|
|
* REG_GAIN_STP_CONFIG_2
|
|
*/
|
|
#define DECREMENT_STP_SIZE_FOR_SMALL_LPF_GAIN_CHANGE(x) (((x) & 0x7) << 4) /* Fast Attack Only. Decrement Step Size for: Small LPF Gain Change / Full Table Case #2 <2:0> */
|
|
#define LARGE_LPF_GAIN_STEP(x) (((x) & 0xF) << 0) /* Decrement Step Size for: Large LPF Gain Change / Full Table Case #1<3:0> */
|
|
|
|
/*
|
|
* REG_SMALL_LMT_OVERLOAD_THRESH
|
|
*/
|
|
#define FORCE_PD_RESET_RX2 (1 << 7) /* Force PD Reset Rx2 */
|
|
#define FORCE_PD_RESET_RX1 (1 << 6) /* Force PD Reset Rx1 */
|
|
#define SMALL_LMT_OVERLOAD_THRESH(x) (((x) & 0x3F) << 0) /* Small LMT Overload Threshold<5:0> */
|
|
|
|
/*
|
|
* REG_LARGE_LMT_OVERLOAD_THRESH
|
|
*/
|
|
#define LARGE_LMT_OVERLOAD_THRESH(x) (((x) & 0x3F) << 0) /* Large LMT Overload Threshold<5:0> */
|
|
|
|
/*
|
|
* REG_RX1_MANUAL_LMT_FULL_GAIN
|
|
*/
|
|
#define POWER_MEAS_IN_STATE_5_MSB (1 << 7) /* Power Meas in State 5 <3> */
|
|
#define RX1_MANUAL_FULL_TABLE_LMT_TABLE_GAIN_INDEX(x) (((x) & 0x7F) << 0) /* Rx1 Manual Full table/LMT table Gain Index<6:0> */
|
|
#define RX_FULL_TBL_IDX_MASK RX1_MANUAL_FULL_TABLE_LMT_TABLE_GAIN_INDEX(~0)
|
|
|
|
/*
|
|
* REG_RX1_MANUAL_LPF_GAIN
|
|
*/
|
|
#define POWER_MEAS_IN_STATE_5(x) (((x) & 0x7) << 5) /* Power Meas in State 5<2:0> */
|
|
#define RX1_MANUAL_LPF_GAIN(x) (((x) & 0x1F) << 0) /* Rx1 Manual LPF Gain <4:0> */
|
|
#define RX_LPF_IDX_MASK RX1_MANUAL_LPF_GAIN(~0)
|
|
|
|
/*
|
|
* REG_RX1_MANUAL_DIGITALFORCED_GAIN
|
|
*/
|
|
#define FORCE_RX1_DIGITAL_GAIN (1 << 5) /* Force Rx1 Digital Gain */
|
|
#define RX1_MANUALFORCED_DIGITAL_GAIN(x) (((x) & 0x1F) << 0) /* Rx1 Manual/Forced Digital Gain<4:0> */
|
|
#define RX_DIGITAL_IDX_MASK RX1_MANUALFORCED_DIGITAL_GAIN(~0)
|
|
/*
|
|
* REG_RX2_MANUAL_LMT_FULL_GAIN
|
|
*/
|
|
#define RX2_MANUAL_FULL_TABLE_LMT_TABLE_GAIN_INDEX(x) (((x) & 0x7F) << 0) /* Rx2 Manual Full table/ LMT table Gain Index<6:0> */
|
|
|
|
/*
|
|
* REG_RX2_MANUAL_LPF_GAIN
|
|
*/
|
|
#define RX2_MANUAL_LPF_GAIN(x) (((x) & 0x1F) << 0) /* Rx2 Manual LPF Gain<4:0> */
|
|
|
|
/*
|
|
* REG_RX2_MANUAL_DIGITALFORCED_GAIN
|
|
*/
|
|
#define FORCE_RX2_DIGITAL_GAIN (1 << 5) /* Force Rx2 Digital Gain */
|
|
#define RX2_MANUALFORCED_DIGITAL_GAIN(x) (((x) & 0x1F) << 0) /* Rx2 Manual/Forced Digital Gain<4:0> */
|
|
|
|
/*
|
|
* REG_FAST_CONFIG_1
|
|
*/
|
|
#define ENABLE_GAIN_INC_AFTER_GAIN_LOCK (1 << 7) /* Enable Gain Inc after Gain Lock */
|
|
#define GOTO_OPT_GAIN_IF_ENERGY_LOST_OR_EN_AGC_HIGH (1 << 6) /* Goto Opt Gain if Energy Lost or EN_AGC High */
|
|
#define GOTO_SET_GAIN_IF_EN_AGC_HIGH (1 << 5) /* Goto Set Gain if EN_AGC High */
|
|
#define GOTO_SET_GAIN_IF_EXIT_RX_STATE (1 << 4) /* Goto Set Gain if Exit Rx State */
|
|
#define DONT_UNLOCK_GAIN_IF_ENERGY_LOST (1 << 3) /* Don't Unlock Gain if Energy Lost */
|
|
#define GOTO_OPTIMIZED_GAIN_IF_EXIT_RX_STATE (1 << 2) /* Goto Optimized Gain if Exit Rx State */
|
|
#define DONT_UNLOCK_GAIN_IF_LG_ADC_OR_LMT_OVRG (1 << 1) /* Don't Unlock Gain If Lg ADC or LMT Ovrg */
|
|
#define ENABLE_INCR_GAIN (1 << 0) /* Enable Incr Gain */
|
|
|
|
/*
|
|
* REG_FAST_CONFIG_2_SETTLING_DELAY
|
|
*/
|
|
#define USE_LAST_LOCK_LEVEL_FOR_SET_GAIN (1 << 7) /* Use Last Lock Level for Set Gain */
|
|
#define ENABLE_LMT_GAIN_INC_FOR_LOCK_LEVEL (1 << 6) /* Enable LMT Gain Inc for Lock Level */
|
|
#define GOTO_MAX_GAIN_OR_OPT_GAIN_IF_EN_AGC_HIGH (1 << 5) /* Goto Max Gain or Opt Gain if EN_AGC High */
|
|
#define SETTLING_DELAY(x) (((x) & 0x1F) << 0) /* Settling Delay<4:0> */
|
|
|
|
/*
|
|
* REG_FAST_ENERGY_LOST_THRESH
|
|
*/
|
|
#define POST_LOCK_LEVEL_STP_SIZE_FOR_LPF_TABLE_FULL_TABLE(x) (((x) & 0x3) << 6) /* Post Lock Level Step Size for: LPF Table/ Full Table <1:0> */
|
|
#define ENERGY_LOST_THRESH(x) (((x) & 0x3F) << 0) /* Energy lost threshold<5:0> */
|
|
|
|
/*
|
|
* REG_FAST_STRONGER_SIGNAL_THRESH
|
|
*/
|
|
#define POST_LOCK_LEVEL_STP_FOR_LMT_TABLE(x) (((x) & 0x3) << 6) /* Post Lock Level Step for LMT Table <1:0> */
|
|
#define STRONGER_SIGNAL_THRESH(x) (((x) & 0x3F) << 0) /* Stronger Signal Threshold<5:0> */
|
|
|
|
/*
|
|
* REG_FAST_LOW_POWER_THRESH
|
|
*/
|
|
#define DONT_UNLOCK_GAIN_IF_ADC_OVRG (1 << 7) /* Don't unlock gain if ADC Ovrg */
|
|
#define LOW_POWER_THRESH(x) (((x) & 0x7F) << 0) /* Low Power Threshold<6:0> */
|
|
|
|
/*
|
|
* REG_FAST_STRONG_SIGNAL_FREEZE
|
|
*/
|
|
#define DONT_UNLOCK_GAIN_IF_STRONGER_SIGNAL (1 << 7) /* Don't unlock gain if Stronger Signal */
|
|
|
|
/*
|
|
* REG_FAST_FINAL_OVER_RANGE_AND_OPT_GAIN
|
|
*/
|
|
#define FINAL_OVER_RANGE_COUNT(x) (((x) & 0x7) << 5) /* Final Over Range Count<2:0> */
|
|
#define OPTIMIZE_GAIN_OFFSET(x) (((x) & 0xF) << 0) /* Optimize Gain Offset<3:0> */
|
|
|
|
/*
|
|
* REG_FAST_ENERGY_DETECT_COUNT
|
|
*/
|
|
#define INCREMENT_GAIN_STP_LPFLMT(x) (((x) & 0x7) << 5) /* Increment Gain Step (LPF/LMT)<2:0> */
|
|
#define ENERGY_DETECT_COUNT(x) (((x) & 0x1F) << 0) /* Energy Detect count<4:0> */
|
|
|
|
/*
|
|
* REG_FAST_AGCLL_UPPER_LIMIT
|
|
*/
|
|
#define AGCLL_MAX_INCREASE(x) (((x) & 0x3F) << 0) /* AGCLL Max Increase<5:0> */
|
|
|
|
/*
|
|
* REG_FAST_GAIN_LOCK_EXIT_COUNT
|
|
*/
|
|
#define GAIN_LOCK_EXIT_COUNT(x) (((x) & 0x3F) << 0) /* Gain Lock Exit Count<5:0> */
|
|
|
|
/*
|
|
* REG_FAST_INITIAL_LMT_GAIN_LIMIT
|
|
*/
|
|
#define INITIAL_LMT_GAIN_LIMIT(x) (((x) & 0x7F) << 0) /* Initial LMT Gain Limit<6:0> */
|
|
|
|
/*
|
|
* REG_AGC_INNER_LOW_THRESH
|
|
*/
|
|
#define PREVENT_GAIN_INC (1 << 7) /* Prevent Gain Inc */
|
|
#define AGC_INNER_LOW_THRESH(x) (((x) & 0x7F) << 0) /* AGC Inner Low Threshold<6:0> */
|
|
|
|
/*
|
|
* REG_LMT_OVERLOAD_COUNTERS
|
|
*/
|
|
#define LARGE_LMT_OVERLOAD_EXED_COUNTER(x) (((x) & 0xF) << 4) /* Large LMT Overload Exceeded Counter<3:0> */
|
|
#define SMALL_LMT_OVERLOAD_EXED_COUNTER(x) (((x) & 0xF) << 0) /* Small LMT Overload Exceeded Counter<3:0> */
|
|
|
|
/*
|
|
* REG_ADC_OVERLOAD_COUNTERS
|
|
*/
|
|
#define LARGE_ADC_OVERLOAD_EXED_COUNTER(x) (((x) & 0xF) << 4) /* Large ADC Overload Exceeded Counter<3:0> */
|
|
#define SMALL_ADC_OVERLOAD_EXED_COUNTER(x) (((x) & 0xF) << 0) /* Small ADC Overload Exceeded Counter<3:0> */
|
|
|
|
/*
|
|
* REG_GAIN_STP1
|
|
*/
|
|
#define IMMED_GAIN_CHANGE_IF_LG_LMT_OVERLOAD (1 << 7) /* Immed. Gain Change if Lg LMT Overload */
|
|
#define IMMED_GAIN_CHANGE_IF_LG_ADC_OVERLOAD (1 << 3) /* Immed. Gain Change if Lg ADC Overload */
|
|
#define AGC_INNER_HIGH_THRESH_EXED_STP_SIZE(x) (((x) & 0x7) << 4) /* AGC Inner High Threshold Exceeded Step Size<2:0> */
|
|
#define AGC_INNER_LOW_THRESH_EXED_STP_SIZE(x) (((x) & 0x7) << 0) /* AGC Inner Low Threshold Exceeded Step Size<2:0> */
|
|
|
|
/*
|
|
* REG_DIGITAL_SAT_COUNTER
|
|
*/
|
|
#define DOUBLE_GAIN_COUNTER (1 << 5) /* Double Gain Counter */
|
|
#define ENABLE_SYNC_FOR_GAIN_COUNTER (1 << 4) /* Enable Sync for Gain Counter */
|
|
#define DIG_SATURATION_EXED_COUNTER(x) (((x) & 0xF) << 0) /* Dig Saturation Exceeded Counter<3:0> */
|
|
|
|
/*
|
|
* REG_OUTER_POWER_THRESHS
|
|
*/
|
|
#define AGC_OUTER_HIGH_THRESH(x) (((x) & 0xF) << 4) /* AGC Outer High Threshold<3:0> */
|
|
#define AGC_OUTER_LOW_THRESH(x) (((x) & 0xF) << 0) /* AGC Outer Low Threshold<3:0> */
|
|
|
|
/*
|
|
* REG_GAIN_STP_2
|
|
*/
|
|
#define AGC_OUTER_HIGH_THRESH_EXED_STP_SIZE(x) (((x) & 0xF) << 4) /* AGC outer High Threshold Exceeded Step Size<3:0> */
|
|
#define AGC_OUTER_LOW_THRESH_EXED_STP_SIZE(x) (((x) & 0xF) << 0) /* AGC Outer Low Threshold Exceeded Step Size<3:0> */
|
|
|
|
/*
|
|
* REG_EXT_LNA_HIGH_GAIN
|
|
*/
|
|
#define EXT_LNA_HIGH_GAIN(x) (((x) & 0x3F) << 0) /* Ext LNA High Gain<5:0> */
|
|
|
|
/*
|
|
* REG_EXT_LNA_LOW_GAIN
|
|
*/
|
|
#define EXT_LNA_LOW_GAIN(x) (((x) & 0x3F) << 0) /* Ext LNA Low Gain<5:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_ADDRESS
|
|
*/
|
|
#define GAIN_TABLE_ADDRESS(x) (((x) & 0x7F) << 0) /* Gain Table Address<6:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_WRITE_DATA1
|
|
*/
|
|
#define EXT_LNA_CTRL (1 << 7) /* Ext LNA Ctrl */
|
|
#define LNA_GAIN(x) (((x) & 0x3) << 5) /* LNA Gain <1:0> */
|
|
#define MIXER_GM_GAIN(x) (((x) & 0x1F) << 0) /* Mixer Gm Gain <4:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_WRITE_DATA2
|
|
*/
|
|
#define TIA_GAIN (1 << 5) /* TIA Gain */
|
|
#define LPF_GAIN(x) (((x) & 0x1F) << 0) /* LPF Gain <4:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_WRITE_DATA_3
|
|
*/
|
|
#define RF_DC_CAL (1 << 5) /* RF DC Cal */
|
|
#define DIGITAL_GAIN(x) (((x) & 0x1F) << 0) /* Digital Gain <4:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_READ_DATA_1
|
|
*/
|
|
#define TO_LNA_GAIN(x) (((x) >> 5) & 0x3) /* LNA Gain <1:0> */
|
|
#define TO_MIXER_GM_GAIN(x) (((x) >> 0) & 0x1F) /* Mixer Gm Gain <4:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_READ_DATA_2
|
|
*/
|
|
#define TO_LPF_GAIN(x) (((x) >> 0) & 0x1F) /* LPF Gain <4:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_READ_DATA_3
|
|
*/
|
|
#define TO_DIGITAL_GAIN(x) (((x) >> 0) & 0x1F) /* Digital Gain <4:0> */
|
|
|
|
/*
|
|
* REG_GAIN_TABLE_CONFIG
|
|
*/
|
|
#define WRITE_GAIN_TABLE (1 << 2) /* Write Gain Table */
|
|
#define START_GAIN_TABLE_CLOCK (1 << 1) /* Start Gain Table Clock */
|
|
#define RECEIVER_SELECT(x) (((x) & 0x3) << 3) /* Receiver Select<1:0> */
|
|
#define GT_RX1 1
|
|
#define GT_RX2 2
|
|
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_GAIN_WRITE
|
|
*/
|
|
#define GM_SUB_TABLE_GAIN_WRITE(x) (((x) & 0x7F) << 0) /* Gm Sub Table Gain Word Write<6:0> */
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_BIAS_WRITE
|
|
*/
|
|
#define GM_SUB_TABLE_BIAS_WRITE(x) (((x) & 0x1F) << 0) /* Gm Sub Table Bias Word Write<4:0> */
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_CTRL_WRITE
|
|
*/
|
|
#define GM_SUB_TABLE_CTRL_WRITE(x) (((x) & 0x3F) << 0) /* Gm Sub Table Control Word Write<5:0> */
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_GAIN_READ
|
|
*/
|
|
#define GM_SUB_TABLE_GAIN_READ(x) (((x) & 0x7F) << 0) /* Gm Sub Table Gain Word Read<6:0> */
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_BIAS_READ
|
|
*/
|
|
#define GM_SUB_TABLE_BIAS_READ(x) (((x) & 0x1F) << 0) /* Gm Sub Table Bias Word Read<4:0> */
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_CTRL_READ
|
|
*/
|
|
#define GM_SUB_TABLE_CTRL_READ(x) (((x) & 0x3F) << 0) /* Gm Sub Table Control Word Read<5:0> */
|
|
|
|
/*
|
|
* REG_GM_SUB_TABLE_CONFIG
|
|
*/
|
|
#define WRITE_GM_SUB_TABLE (1 << 2) /* Write Gm Sub Table */
|
|
#define START_GM_SUB_TABLE_CLOCK (1 << 1) /* Start Gm Sub Table Clock */
|
|
|
|
/*
|
|
* REG_GAIN_DIFF_WORDERROR_WRITE
|
|
*/
|
|
#define CALIB_TABLE_GAIN_DIFFERROR_WORD(x) (((x) & 0x3F) << 0) /* Calib Table Gain Diff/Error Word<5:0> */
|
|
|
|
/*
|
|
* REG_GAIN_ERROR_READ
|
|
*/
|
|
#define CALIB_TABLE_GAIN_ERROR(x) (((x) & 0x1F) << 0) /* Calib Table Gain Error<4:0> */
|
|
|
|
/*
|
|
* REG_CONFIG
|
|
*/
|
|
#define READ_SELECT (1 << 4) /* Read Select */
|
|
#define WRITE_MIXER_ERROR_TABLE (1 << 3) /* Write Mixer Error Table */
|
|
#define WRITE_LNA_ERROR_TABLE (1 << 2) /* Write LNA Error Table */
|
|
#define WRITE_LNA_GAIN_DIFF (1 << 1) /* Write LNA Gain Diff */
|
|
#define START_CALIB_TABLE_CLOCK (1 << 0) /* Start Calib Table Clock */
|
|
#define CALIB_TABLE_SELECT(x) (((x) & 0x3) << 5) /* Calib Table Select<1:0> */
|
|
|
|
/*
|
|
* REG_LNA_GAIN_DIFF_READ_BACK
|
|
*/
|
|
#define LNA_CALIB_TABLE_GAIN_DIFFERENCE_WORD(x) (((x) & 0x3F) << 0) /* LNA Calib Table Gain Difference Word<5:0> */
|
|
|
|
/*
|
|
* REG_MAX_MIXER_CALIBRATION_GAIN_INDEX
|
|
*/
|
|
#define MAX_MIXER_CALIBRATION_GAIN_INDEX(x) (((x) & 0x1F) << 0) /* Max Mixer Calibration Gain Index<4:0> */
|
|
|
|
/*
|
|
* REG_SETTLE_TIME
|
|
*/
|
|
#define ENABLE_DIG_GAIN_CORR (1 << 7) /* Enable Dig Gain Corr */
|
|
#define FORCE_TEMP_SENSOR_FOR_CAL (1 << 6) /* Force Temp Sensor for Cal */
|
|
#define SETTLE_TIME(x) (((x) & 0x3F) << 0) /* Settle Time<5:0> */
|
|
|
|
/*
|
|
* REG_MEASURE_DURATION
|
|
*/
|
|
#define GAIN_CAL_MEAS_DURATION(x) (((x) & 0xF) << 0) /* Gain Cal Meas Duration<3:0> */
|
|
|
|
/*
|
|
* REG_MEASURE_DURATION_01
|
|
*/
|
|
#define MEASUREMENT_DURATION_1(x) (((x) & 0xF) << 4) /* Measurement duration 1 <3:0> */
|
|
#define MEASUREMENT_DURATION_0(x) (((x) & 0xF) << 0) /* Measurement duration 0 <3:0> */
|
|
|
|
/*
|
|
* REG_MEASURE_DURATION_23
|
|
*/
|
|
#define MEASUREMENT_DURATION_3(x) (((x) & 0xF) << 4) /* Measurement duration 3 <3:0> */
|
|
#define MEASUREMENT_DURATION_2(x) (((x) & 0xF) << 0) /* Measurement duration 2 <3:0> */
|
|
|
|
/*
|
|
* REG_RSSI_CONFIG
|
|
*/
|
|
#define START_RSSI_MEAS (1 << 5) /* Start RSSI Meas (Mode 4) */
|
|
#define ENABLE_ADC_POWER_MEAS (1 << 1) /* Enable ADC Power Meas. */
|
|
#define DEFAULT_RSSI_MEAS_MODE (1 << 0) /* Default RSSI Meas Mode */
|
|
#define RFIR_FOR_RSSI_MEASUREMENT(x) (((x) & 0x3) << 6) /* RFIR for RSSI measurement<1:0> */
|
|
#define RSSI_MODE_SELECT(x) (((x) & 0x7) << 2) /* RSSI Mode Select<2:0> */
|
|
|
|
/*
|
|
* REG_ADC_MEASURE_DURATION_01
|
|
*/
|
|
#define ADC_POWER_MEASUREMENT_DURATION_1(x) (((x) & 0xF) << 4) /* ADC Power Measurement Duration 1<3:0> */
|
|
#define ADC_POWER_MEASUREMENT_DURATION_0(x) (((x) & 0xF) << 0) /* ADC Power Measurement Duration 0 <3:0> */
|
|
|
|
/*
|
|
* REG_DEC_POWER_MEASURE_DURATION_0
|
|
*/
|
|
#define USE_HB3_OUT_FOR_ADC_PWR_MEAS (1 << 7) /* Use HB3 Out for ADC Pwr Meas */
|
|
#define USE_HB1_OUT_FOR_DEC_PWR_MEAS (1 << 6) /* Use HB1 Out for Dec pwr Meas */
|
|
#define ENABLE_DEC_PWR_MEAS (1 << 5) /* Enable Dec Pwr Meas */
|
|
#define DEFAULT_MODE_ADC_POWER (1 << 4) /* Default Mode ADC Power */
|
|
#define DEC_POWER_MEASUREMENT_DURATION(x) (((x) & 0xF) << 0) /* Dec Power Measurement Duration <3:0> */
|
|
|
|
/*
|
|
* REG_LNA_GAIN
|
|
*/
|
|
#define DB_GAIN_READBACK_CHANNEL (1 << 0) /* dB Gain Read-back Channel */
|
|
#define MAX_LNA_GAIN(x) (((x) & 0x7F) << 1) /* Max LNA Gain<6:0> */
|
|
|
|
/*
|
|
* REG_RX_QUAD_CAL_LEVEL
|
|
*/
|
|
#define RX_QUAD_CAL_LEVEL(x) (((x) & 0xF) << 0) /* Rx Quad Cal Level <3 :0> */
|
|
|
|
/*
|
|
* REG_CALIBRATION_CONFIG_1
|
|
*/
|
|
#define ENABLE_PHASE_CORR (1 << 7) /* Enable Phase Corr */
|
|
#define ENABLE_GAIN_CORR (1 << 6) /* Enable Gain Corr */
|
|
#define USE_SETTLE_COUNT_FOR_DC_CAL_WAIT (1 << 5) /* Use Settle Count for DC Cal Wait */
|
|
#define FIXED_DC_CAL_WAIT_TIME (1 << 4) /* Fixed DC Cal Wait Time */
|
|
#define FREE_RUN_MODE (1 << 3) /* Free Run Mode */
|
|
#define ENABLE_CORR_WORD_DECIMATION (1 << 2) /* Enable Corr Word Decimation */
|
|
#define ENABLE_TRACKING_MODE_CH2 (1 << 1) /* Enable Tracking Mode CH2 */
|
|
#define ENABLE_TRACKING_MODE_CH1 (1 << 0) /* Enable Tracking Mode CH1 */
|
|
|
|
/*
|
|
* REG_CALIBRATION_CONFIG_2
|
|
*/
|
|
#define SOFT_RESET (1 << 7) /* Soft Reset */
|
|
#define CALIBRATION_CONFIG2_DFLT (0x3 << 5) /* Must be 2'b11 */
|
|
#define K_EXP_PHASE(x) (((x) & 0x1F) << 0) /* K exp Phase<4:0> */
|
|
|
|
/*
|
|
* REG_CALIBRATION_CONFIG_3
|
|
*/
|
|
#define PREVENT_POS_LOOP_GAIN (1 << 7) /* Prevent Pos Loop Gain */
|
|
#define K_EXP_AMPLITUDE(x) (((x) & 0x1F) << 0) /* K exp Amplitude<4:0> */
|
|
|
|
/*
|
|
* REG_RX_QUAD_GAIN1
|
|
*/
|
|
#define RX_FULL_TABLELMT_TABLE_GAIN(x) (((x) & 0x7F) << 0) /* Rx Full table/LMT table gain<6:0> */
|
|
|
|
/*
|
|
* REG_RX_QUAD_GAIN2
|
|
*/
|
|
#define CORRECTION_WORD_DECIMATION_M(x) (((x) & 0x7) << 5) /* Correction Word Decimation M<2:0> */
|
|
#define RX_LPF_GAIN(x) (((x) & 0x1F) << 0) /* Rx LPF gain<4:0> */
|
|
|
|
/*
|
|
* REG_RX1_INPUT_A_OFFSETS
|
|
*/
|
|
#define RX1_INPUT_A_I_DC_OFFSET_LSB(x) (((x) & 0x3F) << 2) /* Rx1 Input A "I" DC Offset<5:0> */
|
|
#define RX1_INPUT_A_Q_DC_OFFSET(x) (((x) & 0x3) << 0) /* Rx1 Input A "Q" DC Offset<9:8> */
|
|
|
|
/*
|
|
* REG_INPUT_A_OFFSETS_1
|
|
*/
|
|
#define RX2_INPUT_A_Q_DC_OFFSET_LSB(x) (((x) & 0xF) << 4) /* Rx2 Input A "Q" DC Offset<3:0> */
|
|
#define RX1_INPUT_A_I_DC_OFFSET_MSB(x) (((x) & 0xF) << 0) /* Rx1 Input A "I" DC Offset<9:6> */
|
|
|
|
/*
|
|
* REG_RX2_INPUT_A_OFFSETS
|
|
*/
|
|
#define RX2_INPUT_A_I_DC_OFFSET(x) (((x) & 0x3) << 6) /* Rx2 Input A "I" DC Offset<1:0> */
|
|
#define RX2_INPUT_A_Q_DC_OFFSET_MSB(x) (((x) & 0x3F) << 0) /* Rx2 Input A "Q" DC Offset<9:4> */
|
|
|
|
/*
|
|
* REG_RX1_INPUT_BC_OFFSETS
|
|
*/
|
|
#define RX1_INPUT_BC_I_DC_OFFSET_LSB(x) (((x) & 0x3F) << 2) /* Rx1 Input B&C "I" DC Offset<5:0> */
|
|
#define RX1_INPUT_BC_Q_DC_OFFSET(x) (((x) & 0x3) << 0) /* Rx1 Input B&C "Q" DC Offset<9:8> */
|
|
|
|
/*
|
|
* REG_INPUT_BC_OFFSETS_1
|
|
*/
|
|
#define RX2_INPUT_BC_Q_DC_OFFSET_LSB(x) (((x) & 0xF) << 4) /* Rx2 Input B&C "Q" DC Offset<3:0> */
|
|
#define RX1_INPUT_BC_I_DC_OFFSET_MSB(x) (((x) & 0xF) << 0) /* Rx1 Input B&C "I" DC Offset<9:6> */
|
|
|
|
/*
|
|
* REG_RX2_INPUT_BC_OFFSETS
|
|
*/
|
|
#define RX2_INPUT_BC_I_DC_OFFSET(x) (((x) & 0x3) << 6) /* Rx2 Input B&C "I" DC Offset<1:0> */
|
|
#define RX2_INPUT_BC_Q_DC_OFFSET_MSB(x) (((x) & 0x3F) << 0) /* Rx2 Input B&C "Q" DC Offset<9:4> */
|
|
|
|
/*
|
|
* REG_FORCE_BITS
|
|
*/
|
|
#define RX2_INPUT_BC_FORCE_OFFSET (1 << 7) /* Rx2 Input B&C Force offset */
|
|
#define RX1_INPUT_BC_FORCE_OFFSET (1 << 6) /* Rx1 Input B&C Force offset */
|
|
#define RX2_INPUT_BC_FORCE_PHGAIN (1 << 5) /* Rx2 Input B&C Force Ph/Gain */
|
|
#define RX1_INPUT_BC_FORCE_PHGAIN (1 << 4) /* Rx1 Input B&C Force Ph/Gain */
|
|
#define RX2_INPUT_A_FORCE_OFFSET (1 << 3) /* Rx2 Input A Force offset */
|
|
#define RX1_INPUT_A_FORCE_OFFSET (1 << 2) /* Rx1 Input A Force offset */
|
|
#define RX2_INPUT_A_FORCE_PHGAIN (1 << 1) /* Rx2 Input A Force Ph/Gain */
|
|
#define RX1_INPUT_A_FORCE_PHGAIN (1 << 0) /* Rx1 Input A Force Ph/Gain */
|
|
|
|
/*
|
|
* REG_RF_DC_OFFSET_CONFIG_1
|
|
*/
|
|
#define DAC_FS(x) (((x) & 0x3) << 4) /* DAC FS<1:0> */
|
|
#define RF_DC_CALIBRATION_COUNT(x) (((x) & 0xF) << 0) /* RF DC Calibration Count<3:0> */
|
|
|
|
/*
|
|
* REG_RF_DC_OFFSET_ATTEN
|
|
*/
|
|
#define RF_DC_OFFSET_TABLE_UPDATE_COUNT(x) (((x) & 0x7) << 5) /* RF DC Offset Table Update Count<2:0> */
|
|
#define RF_DC_OFFSET_ATTEN(x) (((x) & 0x1F) << 0) /* RF DC Offset Attenuation<4:0> */
|
|
|
|
/*
|
|
* REG_INVERT_BITS
|
|
*/
|
|
#define INVERT_RX2_RF_DC_CGIN_WORD (1 << 7) /* Invert Rx2 RF DC CGin Word */
|
|
#define INVERT_RX1_RF_DC_CGIN_WORD (1 << 6) /* Invert Rx1 RF DC CGin Word */
|
|
#define INVERT_RX2_RF_DC_CGOUT_WORD (1 << 5) /* Invert Rx2 RF DC CGout Word */
|
|
#define INVERT_RX1_RF_DC_CGOUT_WORD (1 << 4) /* Invert Rx1 RF DC CGout Word */
|
|
|
|
/*
|
|
* REG_DC_OFFSET_CONFIG2
|
|
*/
|
|
#define USE_WAIT_COUNTER_FOR_RF_DC_INIT_CAL (1 << 7) /* Use Wait Counter for RF DC Init Cal */
|
|
#define ENABLE_FAST_SETTLE_MODE (1 << 6) /* Enable Fast Settle Mode */
|
|
#define ENABLE_BB_DC_OFFSET_TRACKING (1 << 5) /* Enable BB DC Offset Tracking */
|
|
#define RESET_ACC_ON_GAIN_CHANGE (1 << 4) /* Reset Acc on Gain Change */
|
|
#define ENABLE_RF_OFFSET_TRACKING (1 << 3) /* Enable RF Offset Tracking */
|
|
#define DC_OFFSET_UPDATE(x) (((x) & 0x7) << 0) /* DC Offset Update<2:0> */
|
|
|
|
/*
|
|
* REG_RF_CAL_GAIN_INDEX
|
|
*/
|
|
#define RF_MINIMUM_CALIBRATION_GAIN_INDEX(x) (((x) & 0x7F) << 0) /* RF Minimum Calibration Gain Index<6:0> */
|
|
|
|
/*
|
|
* REG_SOI_THRESH
|
|
*/
|
|
#define RF_SOI_THRESH(x) (((x) & 0x7F) << 0) /* RF SOI Threshold<6:0> */
|
|
|
|
/*
|
|
* REG_BB_DC_OFFSET_SHIFT
|
|
*/
|
|
#define INCREASE_COUNT_DURATION (1 << 7) /* Increase Count Duration */
|
|
#define BB_TRACKING_DECIMATE(x) (((x) & 0x3) << 5) /* BB Tracking Decimate<1:0> */
|
|
#define BB_DC_M_SHIFT(x) (((x) & 0x1F) << 0) /* BB DC M Shift<4:0> */
|
|
|
|
/*
|
|
* REG_BB_DC_OFFSET_FAST_SETTLE_SHIFT
|
|
*/
|
|
#define READ_BACK_CH_SEL (1 << 7) /* Read Back CH Sel */
|
|
#define UPDATE_TRACKING_WORD (1 << 6) /* Update Tracking Word */
|
|
#define FORCE_RX_NULL (1 << 5) /* Force Rx Null */
|
|
#define BB_DC_TRACKING_FAST_SETTLE_M_SHIFT(x) (((x) & 0x1F) << 0) /* BB DC Tracking Fast Settle M Shift<4:0> */
|
|
|
|
/*
|
|
* REG_BB_DC_OFFSET_ATTEN
|
|
*/
|
|
#define BB_DC_OFFSET_ATTEN(x) (((x) & 0xF) << 0) /* BB DC Offset Atten<3:0> */
|
|
|
|
/*
|
|
* REG_RX1_BB_DC_WORD_I_MSB
|
|
*/
|
|
#define RX1_BB_DC_OFFSET_CORRECTION_WORD_I(x) (((x) & 0x7F) << 0) /* RX1 BB DC Offset Correction word I<14:8> */
|
|
|
|
/*
|
|
* REG_RX1_BB_DC_WORD_Q_MSB
|
|
*/
|
|
#define RX1_BB_DC_OFFSET_CORRECTION_WORD_Q(x) (((x) & 0x7F) << 0) /* RX1 BB DC Offset Correction word Q<14:8> */
|
|
|
|
/*
|
|
* REG_RX2_BB_DC_WORD_I_MSB
|
|
*/
|
|
#define RX2_BB_DC_OFFSET_CORRECTION_WORD_I(x) (((x) & 0x7F) << 0) /* RX2 BB DC Offset Correction word I<14:8> */
|
|
|
|
/*
|
|
* REG_RX2_BB_DC_WORD_Q_MSB
|
|
*/
|
|
#define RX2_BB_DC_OFFSET_CORRECTION_WORD_Q(x) (((x) & 0x7F) << 0) /* RX2 BB DC Offset Correction word Q<14:8> */
|
|
|
|
/*
|
|
* REG_BB_TRACK_CORR_WORD_I_MSB
|
|
*/
|
|
#define RX1RX2_BB_DC_OFFSET_TRACKING_CORRECTION_WORD_I(x) (((x) & 0x7F) << 0) /* RX1/RX2 BB DC Offset Tracking correction word I<14:8> */
|
|
|
|
/*
|
|
* REG_BB_TRACK_CORR_WORD_Q_MSB
|
|
*/
|
|
#define RX1RX2_BB_DC_OFFSET_TRACKING_CORRECTION_WORD_Q(x) (((x) & 0x7F) << 0) /* RX1/RX2 BB DC Offset Tracking correction word Q<14:8> */
|
|
|
|
/*
|
|
* REG_SYMBOL_LSB
|
|
*/
|
|
#define RX2_RSSI_SYMBOL (1 << 1) /* Rx2 RSSI symbol <0> */
|
|
#define RX1_RSSI_SYMBOL (1 << 0) /* Rx1 RSSI symbol <0> */
|
|
|
|
/*
|
|
* REG_PREAMBLE_LSB
|
|
*/
|
|
#define RX2_RSSI_PREAMBLE (1 << 1) /* Rx2 RSSI preamble <0> */
|
|
#define RX1_RSSI_PREAMBLE (1 << 0) /* Rx1 RSSI preamble <0> */
|
|
|
|
/*
|
|
* REG_RX1_RSSI_SYMBOL, REG_RX1_RSSI_PREAMBLE,
|
|
* REG_RX2_RSSI_SYMBOL, REG_RX2_RSSI_PREAMBLE
|
|
*/
|
|
#define RSSI_LSB_SHIFT 1
|
|
#define RSSI_LSB_MASK1 0x01
|
|
#define RSSI_LSB_MASK2 0x02
|
|
|
|
/*
|
|
* REG_RX_PATH_GAIN_LSB
|
|
*/
|
|
#define RX_PATH_GAIN (1 << 0) /* Rx Path Gain<0> */
|
|
|
|
/*
|
|
* REG_RX_DIFF_LNA_FORCE
|
|
*/
|
|
#define FORCE_RX2_LNA_GAIN (1 << 7) /* Force Rx2 LNA Gain */
|
|
#define RX2_LNA_BYPASS (1 << 6) /* Rx2 LNA Bypass */
|
|
#define FORCE_RX1_LNA_GAIN (1 << 3) /* Force Rx1 LNA Gain */
|
|
#define RX1_LNA_BYPASS (1 << 2) /* Rx1 LNA Bypass */
|
|
#define RX2_LNA_GAIN(x) (((x) & 0x3) << 4) /* Rx2 LNA Gain<1:0> */
|
|
#define RX1_LNA_GAIN(x) (((x) & 0x3) << 0) /* Rx1 LNA Gain<1:0> */
|
|
|
|
/*
|
|
* REG_RX_LNA_BIAS_COARSE
|
|
*/
|
|
#define RX_LNA_BIAS_COARSE(x) (((x) & 0xF) << 0) /* Rx LNA Bias Coarse<3:0> */
|
|
|
|
/*
|
|
* REG_RX_LNA_BIAS_FINE_0
|
|
*/
|
|
#define RX_LNA_PCASCODE_BIAS(x) (((x) & 0x7) << 5) /* Rx LNA p-Cascode Bias<2:0> */
|
|
#define RX_LNA_BIAS(x) (((x) & 0x1F) << 0) /* Rx LNA Bias<4:0> */
|
|
|
|
/*
|
|
* REG_RX_LNA_BIAS_FINE_1
|
|
*/
|
|
#define RX_LNA_P_CASCODE_BIAS_FINE(x) (((x) & 0x3) << 0) /* Rx LNA p- Cascode Bias Fine<4:3> */
|
|
|
|
/*
|
|
* REG_RX_MIX_GM_CONFIG
|
|
*/
|
|
#define RX_MIX_GM_CM_OUT(x) (((x) & 0x7) << 5) /* Rx Mix Gm CM Out<2:0> */
|
|
#define RX_MIX_GM_PLOAD(x) (((x) & 0x3) << 0) /* Rx Mix Gm pload <1:0> */
|
|
|
|
/*
|
|
* REG_RX1_MIX_GM_FORCE
|
|
*/
|
|
#define FORCE_RX1_MIX_GM (1 << 6) /* Force Rx1 Mix Gm */
|
|
#define RX1_MIX_GM_GAIN(x) (((x) & 0x3F) << 0) /* Rx1 Mix Gm Gain<5:0> */
|
|
|
|
/*
|
|
* REG_RX1_MIX_GM_BIAS_FORCE
|
|
*/
|
|
#define RX1_MIX_GM_BIAS(x) (((x) & 0x1F) << 0) /* Rx1 Mix Gm Bias<4:0> */
|
|
|
|
/*
|
|
* REG_RX2_MIX_GM_FORCE
|
|
*/
|
|
#define FORCE_RX2_MIX_GM (1 << 6) /* Force Rx2 Mix Gm */
|
|
#define RX2_MIX_GM_GAIN(x) (((x) & 0x3F) << 0) /* Rx2 Mix Gm Gain<5:0> */
|
|
|
|
/*
|
|
* REG_RX2_MIX_GM_BIAS_FORCE
|
|
*/
|
|
#define RX2_MIX_GM_BIAS(x) (((x) & 0x1F) << 0) /* Rx2 Mix Gm Bias<4:0> */
|
|
|
|
/*
|
|
* REG_INPUT_A_MSBS
|
|
*/
|
|
#define INPUT_A_RX1_Q(x) (((x) & 0x3) << 6) /* Input A RX1 Q<9:8> */
|
|
#define INPUT_A_RX1_I(x) (((x) & 0x3) << 4) /* Input A RX1 I<9:8> */
|
|
#define INPUT_A_RX2_I(x) (((x) & 0x3) << 2) /* Input A RX2 I<9:8> */
|
|
#define INPUT_A_RX2_Q(x) (((x) & 0x3) << 0) /* Input A RX2 Q<9:8> */
|
|
|
|
/*
|
|
* REG_INPUTS_BC_MSBS
|
|
*/
|
|
#define INPUTS_BC_RX1_Q(x) (((x) & 0x3) << 6) /* Inputs B&C RX1 Q<9:8> */
|
|
#define INPUTS_BC_RX1_I(x) (((x) & 0x3) << 4) /* Inputs B&C RX1 I<9:8> */
|
|
#define INPUTS_BC_RX2_I(x) (((x) & 0x3) << 2) /* Inputs B&C RX2 I<9:8> */
|
|
#define INPUTS_BC_RX2_Q(x) (((x) & 0x3) << 0) /* Inputs B&C RX2 Q<9:8> */
|
|
|
|
/*
|
|
* REG_FORCE_OS_DAC
|
|
*/
|
|
#define FORCE_CGIN_DAC (1 << 2) /* Force CGin DAC */
|
|
|
|
/*
|
|
* REG_RX_MIX_LO_CM
|
|
*/
|
|
#define RX_MIX_LO_CM(x) (((x) & 0x3F) << 0) /* Rx Mix LO CM<5:0> */
|
|
|
|
/*
|
|
* REG_RX_CGB_SEG_ENABLE
|
|
*/
|
|
#define RX_CGB_SEG_ENABLE(x) (((x) & 0x3F) << 0) /* Rx CGB Seg Enable<5:0> */
|
|
|
|
/*
|
|
* REG_RX_MIX_INPUTBIAS
|
|
*/
|
|
#define RX_CGB_INPUT_CM_SEL(x) (((x) & 0x3) << 4) /* Rx CGB Input CM Sel<1:0> */
|
|
#define RX_CGB_BIAS(x) (((x) & 0xF) << 0) /* Rx CGB Bias<3:0> */
|
|
|
|
/*
|
|
* REG_RX_TIA_CONFIG
|
|
*/
|
|
#define TIA2_OVERRIDE_C (1 << 3) /* TIA2 Override C */
|
|
#define TIA2_OVERRIDE_R (1 << 2) /* TIA2 Override R */
|
|
#define TIA1_OVERRIDE_C (1 << 1) /* TIA1 Override C */
|
|
#define TIA1_OVERRIDE_R (1 << 0) /* TIA1 Override R */
|
|
#define TIA_SEL_CC(x) (((x) & 0x7) << 5) /* TIA Sel CC<2:0> */
|
|
|
|
/*
|
|
* REG_TIA1_C_LSB
|
|
*/
|
|
#define TIA1_RF(x) (((x) & 0x3) << 6) /* TIA1 RF<1:0> */
|
|
#define TIA1_C_LSB(x) (((x) & 0x3F) << 0) /* TIA1 C LSB<5:0> */
|
|
|
|
/*
|
|
* REG_TIA1_C_MSB
|
|
*/
|
|
#define TIA1_C_MSB(x) (((x) & 0x7F) << 0) /* TIA1 C MSB<6:0> */
|
|
|
|
/*
|
|
* REG_TIA2_C_LSB
|
|
*/
|
|
#define TIA2_RF(x) (((x) & 0x3) << 6) /* TIA2 RF<1:0> */
|
|
#define TIA2_C_LSB(x) (((x) & 0x3F) << 0) /* TIA2 C LSB<5:0> */
|
|
|
|
/*
|
|
* REG_TIA2_C_MSB
|
|
*/
|
|
#define TIA2_C_MSB(x) (((x) & 0x7F) << 0) /* TIA2 C MSB<6:0> */
|
|
|
|
/*
|
|
* REG_RX1_BBF_R1A
|
|
*/
|
|
#define FORCE_RX1_RESISTORS (1 << 7) /* Force Rx1 Resistors */
|
|
#define RX1_BBF_R1A(x) (((x) & 0x3F) << 0) /* Rx1 BBF R1A<5:0> */
|
|
|
|
/*
|
|
* REG_RX2_BBF_R1A
|
|
*/
|
|
#define FORCE_RX2_RESISTORS (1 << 7) /* Force Rx2 Resistors */
|
|
#define RX2_BBF_R1A(x) (((x) & 0x3F) << 0) /* Rx2 BBF R1A<5:0> */
|
|
|
|
/*
|
|
* REG_RX1_TUNE_CTRL
|
|
*/
|
|
#define RX1_TUNE_RESAMPLE_PHASE (1 << 2) /* Rx1 Tune Resample Phase */
|
|
#define RX1_TUNE_RESAMPLE (1 << 1) /* Rx1 Tune Resample */
|
|
#define RX1_PD_TUNE (1 << 0) /* Rx1 PD Tune */
|
|
|
|
/*
|
|
* REG_RX2_TUNE_CTRL
|
|
*/
|
|
#define RX2_TUNE_RESAMPLE_PHASE (1 << 2) /* Rx2 Tune Resam ple Phase */
|
|
#define RX2_TUNE_RESAMPLE (1 << 1) /* Rx2 Tune Resample */
|
|
#define RX2_PD_TUNE (1 << 0) /* Rx2 PD Tune */
|
|
|
|
/*
|
|
* REG_RX_BBF_R2346
|
|
*/
|
|
#define TUNE_OVERRIDE (1 << 7) /* Tune Override */
|
|
#define RX_BBF_R2346(x) (((x) & 0x7) << 0) /* Rx BBF R2346<2:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_C1_MSB
|
|
*/
|
|
#define RX_BBF_C1_MSB(x) (((x) & 0x3F) << 0) /* Rx BBF C1 MSB<5:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_C1_LSB
|
|
*/
|
|
#define RX_BBF_C1_LSB(x) (((x) & 0x7F) << 0) /* Rx BBF C1 LSB<6:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_C2_MSB
|
|
*/
|
|
#define RX_BBF_C2_MSB(x) (((x) & 0x3F) << 0) /* Rx BBF C2 MSB<5:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_C2_LSB
|
|
*/
|
|
#define RX_BBF_C2_LSB(x) (((x) & 0x7F) << 0) /* Rx BBF C2 LSB<6:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_C3_MSB
|
|
*/
|
|
#define RX_BBF_C3_MSB(x) (((x) & 0x3F) << 0) /* Rx BBF C3 MSB<5:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_C3_LSB
|
|
*/
|
|
#define RX_BBF_C3_LSB(x) (((x) & 0x7F) << 0) /* Rx BBF C3 LSB<6:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_CC1_CTR
|
|
*/
|
|
#define RX_BBF_CC1_CTR(x) (((x) & 0x7F) << 0) /* Rx BBF CC1 Ctr<6:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_POW_RZ_BYTE0
|
|
*/
|
|
#define MUST_BE_ZERO (1 << 7) /* Must be zero */
|
|
#define RX1_BBF_POW_CTR(x) (((x) & 0x3) << 5) /* Rx1 BBF Pow Ctr<1:0> */
|
|
#define RX_BBF_RZ1_CTR(x) (((x) & 0x3) << 3) /* Rx BBF Rz1 Ctr<1:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_CC2_CTR
|
|
*/
|
|
#define RX_BBF_CC2_CTR(x) (((x) & 0x7F) << 0) /* Rx BBF CC2 Ctr<6:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_POW_RZ_BYTE1
|
|
*/
|
|
#define RX_BBF_POW3_CTR(x) (((x) & 0x3) << 6) /* Rx BBF Pow3 Ctr<1:0> */
|
|
#define RX_BBF_RZ3_CTR(x) (((x) & 0x3) << 4) /* Rx BBF RZ3 Ctr<1:0> */
|
|
#define RX_BBF_POW2_CTR(x) (((x) & 0x3) << 2) /* Rx BBF Pow2 Ctr<1:0> */
|
|
#define RX_BBF_RZ2_CTR(x) (((x) & 0x3) << 0) /* Rx BBF Rz2 Ctr<1:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_CC3_CTR
|
|
*/
|
|
#define RX_BBF_CC3_CTR(x) (((x) & 0x7F) << 0) /* Rx BBF CC3 Ctr<6:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_TUNE
|
|
*/
|
|
#define RXBBF_BYPASS_BIAS_R (1 << 7) /* RxBBF Bypass Bias R */
|
|
#define RX_BBF_R5_TUNE (1 << 4) /* Rx BBF R5 Tune */
|
|
#define RX1_BBF_TUNE_COMP_I (1 << 3) /* Rx1 BBF Tune Comp I */
|
|
#define RX1_BBF_TUNE_COMP_Q (1 << 2) /* Rx1 BBF Tune Comp Q */
|
|
#define RX2_BBF_TUNE_COMP_I (1 << 1) /* Rx2 BBF Tune Comp I */
|
|
#define RX2_BBF_TUNE_COMP_Q (1 << 0) /* Rx2 BBF Tune Comp Q */
|
|
#define RX_BBF_TUNE_CTR(x) (((x) & 0x3) << 5) /* Rx BBF Tune Ctr<1:0> */
|
|
|
|
/*
|
|
* REG_RX1_BBF_MAN_GAIN
|
|
*/
|
|
#define RX1_BBF_FORCE_GAIN (1 << 5) /* Rx1 BBF Force Gain */
|
|
#define RX1_BBF_BQ_GAIN(x) (((x) & 0x3) << 3) /* Rx1 BBF BQ Gain<1:0> */
|
|
#define RX1_BBF_POLE_GAIN(x) (((x) & 0x7) << 0) /* Rx1 BBF Pole Gain<2:0> */
|
|
|
|
/*
|
|
* REG_RX2_BBF_MAN_GAIN
|
|
*/
|
|
#define RX2_BBF_FORCE_GAIN (1 << 5) /* Rx2 BBF Force Gain */
|
|
#define RX2_BBF_BQ_GAIN(x) (((x) & 0x3) << 3) /* Rx2 BBF BQ Gain<1:0> */
|
|
#define RX2_BBF_POLE_GAIN(x) (((x) & 0x7) << 0) /* Rx2 BBF Pole Gain<2:0> */
|
|
|
|
/*
|
|
* REG_RX_BBF_TUNE_CONFIG
|
|
*/
|
|
#define RX_TUNE_EVALTIME (1 << 4) /* Rx Tune Evaltime */
|
|
#define RX_BBF_TUNE_DIVIDE (1 << 0) /* RX BBF Tune Divide<8> */
|
|
#define TUNE_COMP_MASK(x) (((x) & 0x3) << 5) /* Tune Comp Mask <1:0> */
|
|
#define RX_TUNE_MODE(x) (((x) & 0x7) << 1) /* Rx Tune Mode<2:0> */
|
|
|
|
/*
|
|
* REG_POLE_GAIN
|
|
*/
|
|
#define POLE_GAIN_TUNE(x) (((x) & 0x3) << 0) /* Pole Gain Tune<1:0> */
|
|
|
|
/*
|
|
* REG_RX_BBBW_MHZ
|
|
*/
|
|
#define RX_TUNE_BBBW_MHZ(x) (((x) & 0x1F) << 0) /* Rx Tune BBBW MHz<4::0> */
|
|
|
|
/*
|
|
* REG_RX_BBBW_KHZ
|
|
*/
|
|
#define RX_TUNE_BBBW_KHZ(x) (((x) & 0x7F) << 0) /* Rx Tune BBBW kHz<6:0> */
|
|
|
|
/*
|
|
* REG_RX_PFD_CONFIG
|
|
*/
|
|
#define BYPASS_LD_SYNTH (1 << 0) /* Bypass Ld Synth */
|
|
|
|
/*
|
|
* REG_RX_INTEGER_BYTE_1
|
|
*/
|
|
#define SYNTH_INTEGER_WORD(x) (((x) & 0x7) << 0) /* Synthesizer Integer Word<10:8> */
|
|
|
|
/*
|
|
* REG_RX_FRACT_BYTE_2
|
|
*/
|
|
#define SYNTH_FRACT_WORD(x) (((x) & 0x7F) << 0) /* Synthesizer Fractional Word <22:16> */
|
|
|
|
/*
|
|
* REG_RX_FORCE_VCO_TUNE_1
|
|
*/
|
|
#define VCO_CAL_OFFSET(x) (((x) & 0xF) << 3) /* VCO Cal Offset<3:0> */
|
|
|
|
/*
|
|
* REG_RX_ALC_VARACTOR
|
|
*/
|
|
#define INIT_ALC_VALUE(x) (((x) & 0xF) << 4) /* Init ALC Value<3:0> */
|
|
#define VCO_VARACTOR(x) (((x) & 0xF) << 0) /* VCO Varactor<3:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_OUTPUT
|
|
*/
|
|
#define PORB_VCO_LOGIC (1 << 6) /* PORb VCO Logic */
|
|
#define VCO_OUTPUT_LEVEL(x) (((x) & 0xF) << 0) /* VCO Output Level<3:0> */
|
|
|
|
/*
|
|
* REG_RX_CP_CURRENT
|
|
*/
|
|
#define CHARGE_PUMP_CURRENT(x) (((x) & 0x3F) << 0) /* Charge Pump Current<5:0> */
|
|
|
|
/*
|
|
* REG_RX_CP_OFFSET
|
|
*/
|
|
#define SYNTH_RECAL (1 << 7) /* Synth Re-Cal */
|
|
|
|
/*
|
|
* REG_RX_CP_CONFIG
|
|
*/
|
|
#define HALF_VCO_CAL_CLK (1 << 7) /* Half Vco Cal Clk */
|
|
#define CP_OFFSET_OFF (1 << 4) /* CP Offset Off */
|
|
#define F_CPCAL (1 << 3) /* F Cpcal */
|
|
#define CP_CAL_ENABLE (1 << 2) /* Cp Cal Enable */
|
|
|
|
/*
|
|
* REG_RX_LOOP_FILTER_1
|
|
*/
|
|
#define LOOP_FILTER_C2(x) (((x) & 0xF) << 4) /* Loop Filter C2<3:0> */
|
|
#define LOOP_FILTER_C1(x) (((x) & 0xF) << 0) /* Loop Filter C1<3:0> */
|
|
|
|
/*
|
|
* REG_RX_LOOP_FILTER_2
|
|
*/
|
|
#define LOOP_FILTER_R1(x) (((x) & 0xF) << 4) /* Loop Filter R1<3:0> */
|
|
#define LOOP_FILTER_C3(x) (((x) & 0xF) << 0) /* Loop Filter C3<3:0> */
|
|
|
|
/*
|
|
* REG_RX_LOOP_FILTER_3
|
|
*/
|
|
#define LOOP_FILTER_BYPASS_R3 (1 << 7) /* Loop Filter Bypass R3 */
|
|
#define LOOP_FILTER_BYPASS_R1 (1 << 6) /* Loop Filter Bypass R1 */
|
|
#define LOOP_FILTER_BYPASS_C2 (1 << 5) /* Loop Filter Bypass C2 */
|
|
#define LOOP_FILTER_BYPASS_C1 (1 << 4) /* Loop Filter Bypass C1 */
|
|
#define LOOP_FILTER_R3(x) (((x) & 0xF) << 0) /* Loop Filter R3<3:0> */
|
|
|
|
/*
|
|
* REG_RX_DITHERCP_CAL
|
|
*/
|
|
#define FORCED_CP_CAL_WORD(x) (((x) & 0xF) << 0) /* Forced CP Cal Word<3:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_BIAS_1
|
|
*/
|
|
#define VCO_BIAS_TCF(x) (((x) & 0x3) << 3) /* VCO Bias Tcf<1:0> */
|
|
#define VCO_BIAS_REF(x) (((x) & 0x7) << 0) /* VCO Bias Ref<2:0> */
|
|
|
|
/*
|
|
* REG_RX_CAL_STATUS
|
|
*/
|
|
#define CP_CAL_VALID (1 << 7) /* CP Cal Valid */
|
|
#define CP_CAL_DONE (1 << 5) /* CP Cal Done */
|
|
#define VCO_CAL_BUSY (1 << 4) /* VCO Cal Busy */
|
|
#define CP_CAL_WORD(x) (((x) & 0xF) << 0) /* CP Cal Word<3:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_CAL_REF
|
|
*/
|
|
#define VCO_CAL_REF_TCF(x) (((x) & 0x7) << 0) /* VCO Cal Ref Tcf<2:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_PD_OVERRIDES
|
|
*/
|
|
#define POWER_DOWN_VARACTOR_REF (1 << 3) /* Power Down Varactor Ref */
|
|
#define PWR_DOWN_VARACT_REF_TCF (1 << 2) /* Pwr Down Varact Ref Tcf */
|
|
#define POWER_DOWN_CAL_TCF (1 << 1) /* Power Down Cal Tcf */
|
|
#define POWER_DOWN_VCO_BUFFFER (1 << 0) /* Power Down VCO Bufffer */
|
|
|
|
/*
|
|
* REG_RX_CP_OVERRANGE_VCO_LOCK
|
|
*/
|
|
#define CP_OVRG_HIGH (1 << 7) /* CP Ovrg High */
|
|
#define CP_OVRG_LOW (1 << 6) /* CP Ovrg Low */
|
|
#define VCO_LOCK (1 << 1) /* Lock */
|
|
|
|
/*
|
|
* REG_RX_VCO_LDO
|
|
*/
|
|
#define VCO_LDO_BYPASS (1 << 7) /* VCO LDO Bypass */
|
|
#define VCO_LDO_INRUSH(x) (((x) & 0x3) << 5) /* VCO LDO Inrush<1:0> */
|
|
#define VCO_LDO_SEL(x) (((x) & 0x7) << 2) /* VCO LDO Sel<2:0> */
|
|
#define VCO_LDO_VDROP_SEL(x) (((x) & 0x3) << 0) /* VCO LDO Vdrop Sel<1:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_CAL
|
|
*/
|
|
#define VCO_CAL_EN (1 << 7) /* VCO Cal En */
|
|
#define VCO_CAL_ALC_WAIT(x) (((x) & 0x7) << 4) /* VCO Cal ALC Wait <2:0> */
|
|
#define VCO_CAL_COUNT(x) (((x) & 0x3) << 2) /* VCO Cal Count <1:0> */
|
|
|
|
/*
|
|
* REG_RX_LOCK_DETECT_CONFIG
|
|
*/
|
|
#define LOCK_DETECT_COUNT(x) (((x) & 0x3) << 2) /* Lock Detect Count<1:0> */
|
|
#define LOCK_DETECT_MODE(x) (((x) & 0x3) << 0) /* Lock Detect Mode<1:0> */
|
|
|
|
/*
|
|
* REG_RX_CP_LEVEL_DETECT
|
|
*/
|
|
#define CP_LEVEL_DETECT_POWER_DOWN (1 << 6) /* CP Level Detect Power Down */
|
|
#define CP_LEVEL_THRESH_LOW(x) (((x) & 0x7) << 3) /* CP Level Threshold Low<2:0> */
|
|
#define CP_LEVEL_THRESH_HIGH(x) (((x) & 0x7) << 0) /* CP Level Threshold High<2:0> */
|
|
|
|
/*
|
|
* REG_RX_DSM_SETUP_0
|
|
*/
|
|
#define DSM_PROG(x) (((x) & 0xF) << 0) /* DSM Prog<3:0> */
|
|
|
|
/*
|
|
* REG_RX_DSM_SETUP_1
|
|
*/
|
|
#define SIF_CLOCK (1 << 6) /* SIF clock */
|
|
#define SIF_RESET_BAR (1 << 5) /* SIF Reset Bar */
|
|
#define SIF_ADDR(x) (((x) & 0x1F) << 0) /* SIF Addr<4:0> */
|
|
|
|
/*
|
|
* REG_RX_CORRECTION_WORD0
|
|
*/
|
|
#define UPDATE_FREQ_WORD (1 << 7) /* Update Freq Word */
|
|
#define READ_EFFECTIVE_TUNING_WORD (1 << 5) /* Read Effective Tuning Word */
|
|
#define FREQ_CORRECTION_WORD_MSB(x) (((x) & 0x1F) << 0) /* Frequency Correction Word<11:7> */
|
|
|
|
/*
|
|
* REG_RX_CORRECTION_WORD1
|
|
*/
|
|
#define UPDATE_FREQ_WORD (1 << 7) /* Update Freq Word */
|
|
#define FREQ_CORRECTION_WORD_LSB(x) (((x) & 0x7F) << 0) /* Frequency Correction Word<6:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_VARACTOR_CTRL_0
|
|
*/
|
|
#define VCO_VARACTOR_REFERENCE_TCF(x) (((x) & 0x7) << 4) /* VCO Varactor Reference Tcf<2:0> */
|
|
#define VCO_VARACTOR_OFFSET(x) (((x) & 0xF) << 0) /* VCO Varactor Offset<3:0> */
|
|
|
|
/*
|
|
* REG_RX_VCO_VARACTOR_CTRL_1
|
|
*/
|
|
#define VCO_VARACTOR_REFERENCE(x) (((x) & 0xF) << 0) /* VCO Varactor Reference<3:0> */
|
|
|
|
/*
|
|
* REG_RX_FAST_LOCK_SETUP
|
|
*/
|
|
#define RX_FAST_LOCK_LOAD_SYNTH (1 << 3) /* Rx Fast Lock Load Synth */
|
|
#define RX_FAST_LOCK_PROFILE_INIT (1 << 2) /* Rx Fast Lock Profile Init */
|
|
#define RX_FAST_LOCK_PROFILE_PIN_SELECT (1 << 1) /* Rx Fast Lock Profile Pin Select */
|
|
#define RX_FAST_LOCK_MODE_ENABLE (1 << 0) /* Rx Fast Lock Mode Enable */
|
|
#define RX_FAST_LOCK_PROFILE(x) (((x) & 0x7) << 5) /* Rx Fast Lock Profile<2:0> */
|
|
|
|
/*
|
|
* REG_RX_FAST_LOCK_PROGRAM_ADDR
|
|
*/
|
|
#define RX_FAST_LOCK_PROFILE_ADDR(x) (((x) & 0x7) << 4) /* Rx Fast Lock Profile<2:0> */
|
|
#define RX_FAST_LOCK_PROFILE_WORD(x) (((x) & 0xF) << 0) /* Configuration Word <3:0> */
|
|
|
|
|
|
/*
|
|
* REG_RX_FAST_LOCK_PROGRAM_CTRL
|
|
*/
|
|
#define RX_FAST_LOCK_PROGRAM_WRITE (1 << 1) /* Rx Fast Lock Program Write */
|
|
#define RX_FAST_LOCK_PROGRAM_CLOCK_ENABLE (1 << 0) /* Rx Fast Lock Program Clock Enable */
|
|
|
|
#define RX_FAST_LOCK_CONFIG_WORD_NUM 16
|
|
|
|
/*
|
|
* REG_RX_LO_GEN_POWER_MODE
|
|
*/
|
|
#define RX_LO_GEN_POWER_MODE(x) (((x) & 0x3) << 4) /* Power Mode<3:0> */
|
|
|
|
/*
|
|
* REG_TX_PFD_CONFIG
|
|
*/
|
|
#define DIV_TEST_EN (1 << 5) /* Div Test En */
|
|
#define PFD_CLK_EDGE (1 << 1) /* PFD Clk Edge */
|
|
#define BYPASS_LD_SYNTH (1 << 0) /* Bypass Ld Synth */
|
|
#define PFD_WIDTH(x) (((x) & 0x3) << 2) /* PFD Width <1:0> */
|
|
|
|
/*
|
|
* REG_TX_INTEGER_BYTE_1
|
|
*/
|
|
#define SDM_BYPASS (1 << 7) /* SDM Bypass */
|
|
#define SDM_POWER_DOWN (1 << 6) /* SDM Power Down */
|
|
#define SYNTH_INTEGER_WORD(x) (((x) & 0x7) << 0) /* Synthesizer Integer Word<10:8> */
|
|
|
|
/*
|
|
* REG_TX_FRACT_BYTE_2
|
|
*/
|
|
#define SYNTH_FRACT_WORD(x) (((x) & 0x7F) << 0) /* Synthesizer Fractional Word <22:16> */
|
|
|
|
/*
|
|
* REG_TX_FORCE_ALC
|
|
*/
|
|
#define FORCE_ALC_ENABLE (1 << 7) /* Force ALC Enable */
|
|
#define FORCE_ALC_WORD(x) (((x) & 0x7F) << 0) /* Force ALC Word<6:0> */
|
|
|
|
/*
|
|
* REG_TX_FORCE_VCO_TUNE_1
|
|
*/
|
|
#define BYPASS_LOAD_DELAY (1 << 7) /* Bypass Load Delay */
|
|
#define FORCE_VCO_TUNE_ENABLE (1 << 1) /* Force VCO Tune Enable */
|
|
#define FORCE_VCO_TUNE (1 << 0) /* Force VCO Tune */
|
|
#define VCO_CAL_OFFSET(x) (((x) & 0xF) << 3) /* VCO Cal Offset<3:0> */
|
|
|
|
/*
|
|
* REG_TX_ALCVARACT_OR
|
|
*/
|
|
#define INIT_ALC_VALUE(x) (((x) & 0xF) << 4) /* Init ALC Value<3:0> */
|
|
#define VCO_VARACTOR(x) (((x) & 0xF) << 0) /* VCO Varactor<3:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_OUTPUT
|
|
*/
|
|
#define PORB_VCO_LOGIC (1 << 6) /* PORb VCO Logic */
|
|
#define VCO_OUTPUT_LEVEL(x) (((x) & 0xF) << 0) /* VCO Output Level<3:0> */
|
|
|
|
/*
|
|
* REG_TX_CP_CURRENT
|
|
*/
|
|
#define TX_CP_CURRENT_DFLT (1 << 7) /* Set to 1 */
|
|
#define VTUNE_FORCE (1 << 6) /* Vtune Force */
|
|
#define CHARGE_PUMP_CURRENT(x) (((x) & 0x3F) << 0) /* Charge Pump Current<5:0> */
|
|
|
|
/*
|
|
* REG_TX_CP_OFFSET
|
|
*/
|
|
#define SYNTH_RECAL (1 << 7) /* Synth Re-Cal */
|
|
#define CHARGE_PUMP_OFFSET(x) (((x) & 0x3F) << 0) /* Charge Pump Offset<5:0> */
|
|
|
|
/*
|
|
* REG_TX_CP_CONFIG
|
|
*/
|
|
#define HALF_VCO_CAL_CLK (1 << 7) /* Half Vco Cal Clk */
|
|
#define DITHER_MODE (1 << 6) /* Dither Mode */
|
|
#define CP_OFFSET_OFF (1 << 4) /* Cp Offset Off */
|
|
#define F_CPCAL (1 << 3) /* F Cpcal */
|
|
#define CP_CAL_ENABLE (1 << 2) /* Cp Cal Enable */
|
|
#define CP_TEST(x) (((x) & 0x3) << 0) /* Cp Test <1:0> */
|
|
|
|
/*
|
|
* REG_TX_LOOP_FILTER_1
|
|
*/
|
|
#define LOOP_FILTER_C2(x) (((x) & 0xF) << 4) /* Loop Filter C2<3:0> */
|
|
#define LOOP_FILTER_C1(x) (((x) & 0xF) << 0) /* Loop Filter C1<3:0> */
|
|
|
|
/*
|
|
* REG_TX_LOOP_FILTER_2
|
|
*/
|
|
#define LOOP_FILTER_R1(x) (((x) & 0xF) << 4) /* Loop Filter R1<3:0> */
|
|
#define LOOP_FILTER_C3(x) (((x) & 0xF) << 0) /* Loop Filter C3<3:0> */
|
|
|
|
/*
|
|
* REG_TX_LOOP_FILTER_3
|
|
*/
|
|
#define LOOP_FILTER_BYPASS_R3 (1 << 7) /* Loop Filter Bypass R3 */
|
|
#define LOOP_FILTER_BYPASS_R1 (1 << 6) /* Loop Filter Bypass R1 */
|
|
#define LOOP_FILTER_BYPASS_C2 (1 << 5) /* Loop Filter Bypass C2 */
|
|
#define LOOP_FILTER_BYPASS_C1 (1 << 4) /* Loop Filter Bypass C1 */
|
|
#define LOOP_FILTER_R3(x) (((x) & 0xF) << 0) /* Loop Filter R3<3:0> */
|
|
|
|
/*
|
|
* REG_TX_DITHERCP_CAL
|
|
*/
|
|
#define NUMBER_SDM_DITHER_BITS(x) (((x) & 0xF) << 4) /* Number SDM Dither Bits<3:0> */
|
|
#define FORCED_CP_CAL_WORD(x) (((x) & 0xF) << 0) /* Forced CP Cal Word<3:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_BIAS_1
|
|
*/
|
|
#define MUST_BE_ZEROS(x) (((x) & 0x3) << 5) /* Must be zeros */
|
|
#define VCO_BIAS_TCF(x) (((x) & 0x3) << 3) /* VCO Bias Tcf<1:0> */
|
|
#define VCO_BIAS_REF(x) (((x) & 0x7) << 0) /* VCO Bias Ref<2:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_BIAS_2
|
|
*/
|
|
#define VCO_BYPASS_BIAS_DAC_R (1 << 7) /* VCO Bypass Bias DAC R */
|
|
#define VCO_COMP_BYPASS_BIAS_R (1 << 4) /* VCO Comp Bypass Bias R */
|
|
#define BYPASS_PRESCALE_R (1 << 3) /* Bypass Prescale R */
|
|
#define LAST_ALC_ENABLE (1 << 2) /* Last ALC Enable */
|
|
#define PRESCALE_BIAS(x) (((x) & 0x3) << 0) /* Prescale Bias <1:0> */
|
|
|
|
/*
|
|
* REG_TX_CAL_STATUS
|
|
*/
|
|
#define CP_CAL_VALID (1 << 7) /* CP Cal Valid */
|
|
#define COMP_OUT (1 << 6) /* Comp Out */
|
|
#define CP_CAL_DONE (1 << 5) /* CP Cal Done */
|
|
#define VCO_CAL_BUSY (1 << 4) /* VCO Cal Busy */
|
|
#define CP_CAL_WORD(x) (((x) & 0xF) << 0) /* CP Cal Word<3:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_CAL_REF
|
|
*/
|
|
#define VCO_CAL_REF_MONITOR (1 << 3) /* VCO Cal Ref Monitor */
|
|
#define VCO_CAL_REF_TCF(x) (((x) & 0x7) << 0) /* VCO Cal Ref Tcf<2:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_PD_OVERRIDES
|
|
*/
|
|
#define POWER_DOWN_VARACTOR_REF (1 << 3) /* Power Down Varactor Ref */
|
|
#define POWER_DOWN_VARACT_REF_TCF (1 << 2) /* Power Down Varact Ref Tcf */
|
|
#define POWER_DOWN_CAL_TCF (1 << 1) /* Power Down Cal Tcf */
|
|
#define POWER_DOWN_VCO_BUFFFER (1 << 0) /* Power Down VCO Bufffer */
|
|
|
|
/*
|
|
* REG_TX_CP_OVERRANGE_VCO_LOCK
|
|
*/
|
|
#define CP_OVRG_HIGH (1 << 7) /* CP Ovrg High */
|
|
#define CP_OVRG_LOW (1 << 6) /* CP Ovrg Low */
|
|
#define VCO_LOCK (1 << 1) /* Lock */
|
|
|
|
/*
|
|
* REG_TX_VCO_LDO
|
|
*/
|
|
#define VCO_LDO_BYPASS (1 << 7) /* VCO LDO Bypass */
|
|
#define VCO_LDO_INRUSH(x) (((x) & 0x3) << 5) /* VCO LDO Inrush<1:0> */
|
|
#define VCO_LDO_VOUT_SEL(x) (((x) & 0x7) << 2) /* VCO LDO Vout Sel<2:0> */
|
|
#define VCO_LDO_VDROP_SEL(x) (((x) & 0x3) << 0) /* VCO LDO Vdrop Sel<1:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_CAL
|
|
*/
|
|
#define VCO_CAL_EN (1 << 7) /* VCO Cal En */
|
|
#define VCO_CAL_ALC_WAIT(x) (((x) & 0x7) << 4) /* VCO Cal ALC Wait<2:0) */
|
|
#define VCO_CAL_COUNT(x) (((x) & 0x3) << 2) /* VCO Cal Count<1:0> */
|
|
#define FB_CLOCK_ADV(x) (((x) & 0x3) << 0) /* FB Clock Adv<1:0> */
|
|
|
|
/*
|
|
* REG_TX_LOCK_DETECT_CONFIG
|
|
*/
|
|
#define LOCK_DETECT_COUNT(x) (((x) & 0x3) << 2) /* Lock Detect Count<1:0> */
|
|
#define LOCK_DETECT_MODE(x) (((x) & 0x3) << 0) /* Lock Detect Mode<1:0> */
|
|
|
|
/*
|
|
* REG_TX_CP_LEVEL_DETECT
|
|
*/
|
|
#define CP_LEVEL_DETECT_POWER_DOWN (1 << 6) /* CP Level Detect Power Down */
|
|
#define CP_LEVEL_DETECT_THRESH_LOW(x) (((x) & 0x7) << 3) /* CP Level Detect Threshold Low<2:0> */
|
|
#define CP_LEVEL_DETECT_THRESH_HIGH(x) (((x) & 0x7) << 0) /* CP Level Detect Threshold High<2:0> */
|
|
|
|
/*
|
|
* REG_TX_DSM_SETUP_0
|
|
*/
|
|
#define DSM_PROG(x) (((x) & 0xF) << 0) /* DSM Prog<3:0> */
|
|
|
|
/*
|
|
* REG_TX_DSM_SETUP_1
|
|
*/
|
|
#define SIF_CLOCK (1 << 6) /* SIF clock */
|
|
#define SIF_RESET_BAR (1 << 5) /* SIF Reset Bar */
|
|
#define SIF_ADDR(x) (((x) & 0x1F) << 0) /* SIF Addr<4:0> */
|
|
|
|
/*
|
|
* REG_TX_CORRECTION_WORD0
|
|
*/
|
|
#define UPDATE_FREQ_WORD (1 << 7) /* Update Freq Word */
|
|
#define READ_EFFECTIVE_TUNING_WORD (1 << 5) /* Read Effective Tuning Word */
|
|
#define FREQ_CORRECTION_WORD_MSB(x) (((x) & 0x1F) << 0) /* Frequency Correction Word<11:7> */
|
|
|
|
/*
|
|
* REG_TX_CORRECTION_WORD1
|
|
*/
|
|
#define UPDATE_FREQ_WORD (1 << 7) /* Update Freq Word */
|
|
#define FREQ_CORRECTION_WORD_LSB(x) (((x) & 0x7F) << 0) /* Frequency Correction Word<6:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_VARACTOR_CTRL_0
|
|
*/
|
|
#define VCO_VARACTOR_REFERENCE_TCF(x) (((x) & 0x7) << 4) /* VCO Varactor Reference Tcf<2:0> */
|
|
#define VCO_VARACTOR_OFFSET(x) (((x) & 0xF) << 0) /* VCO Varactor Offset<3:0> */
|
|
|
|
/*
|
|
* REG_TX_VCO_VARACTOR_CTRL_1
|
|
*/
|
|
#define VCO_VARACTOR_REFERENCE(x) (((x) & 0xF) << 0) /* VCO Varactor Reference<3:0> */
|
|
|
|
/*
|
|
* REG_DCXO_COARSE_TUNE
|
|
*/
|
|
#define DCXO_TUNE_COARSE(x) (((x) & 0x3F) << 0) /* DCXO Tune Coarse<5:0> */
|
|
|
|
/*
|
|
* REG_DCXO_FINE_TUNE_LOW
|
|
*/
|
|
#define DCXO_TUNE_FINE_LOW(x) (((x) & 0x1F) << 3) /* DCXO Tune Fine<4:0> */
|
|
|
|
/*
|
|
* REG_DCXO_FINE_TUNE_HIGH
|
|
*/
|
|
#define DCXO_TUNE_FINE_HIGH(x) ((x) >> 5) /* DCXO Tune Fine<12:5> */
|
|
|
|
/*
|
|
* REG_DCXO_CONFIG
|
|
*/
|
|
#define MUST_BE_ZERO (1 << 7) /* Must be zero */
|
|
#define DCXO_RTAIL(x) (((x) & 0x7) << 4) /* DCXO Rtail<2:0> */
|
|
#define DCXO_RD(x) (((x) & 0x3) << 2) /* DCXO Rd<1:0> */
|
|
|
|
/*
|
|
* REG_DCXO_TEMPCO_ADDR
|
|
*/
|
|
#define DCXO_TEMPCO_EN (1 << 7) /* DCXO Tempco En */
|
|
#define DCXO_TEMPCO_CLK (1 << 6) /* DCXO Tempco Clk */
|
|
#define DCXO_TEMPERATURE_COEF_ADDRESS(x) (((x) & 0x3F) << 0) /* DCXO Temperature Coefficient Address<5:0> */
|
|
|
|
/*
|
|
* REG_TX_FAST_LOCK_SETUP
|
|
*/
|
|
#define TX_FAST_LOCK_LOAD_SYNTH (1 << 3) /* Tx Fast Lock Load Synth */
|
|
#define TX_FAST_LOCK_PROFILE_INIT (1 << 2) /* Tx Fast Lock Profile Init */
|
|
#define TX_FAST_LOCK_PROFILE_PIN_SELECT (1 << 1) /* Tx Fast Lock Profile Pin Select */
|
|
#define TX_FAST_LOCK_MODE_ENABLE (1 << 0) /* Tx Fast Lock Mode Enable */
|
|
#define TX_FAST_LOCK_PROFILE(x) (((x) & 0x7) << 5) /* Tx Fast Lock Profile<2:0> */
|
|
|
|
/*
|
|
* REG_TX_FAST_LOCK_PROGRAM_CTRL
|
|
*/
|
|
#define TX_FAST_LOCK_PROGRAM_WRITE (1 << 1) /* Tx Fast Lock Program Write */
|
|
#define TX_FAST_LOCK_PROGRAM_CLOCK_ENABLE (1 << 0) /* Tx Fast Lock Program Clock Enable */
|
|
|
|
/*
|
|
* REG_TX_LO_GEN_POWER_MODE
|
|
*/
|
|
#define TX_LO_GEN_POWER_MODE(x) (((x) & 0xF) << 4) /* Power Mode<3:0> */
|
|
|
|
/*
|
|
* REG_BANDGAP_CONFIG0
|
|
*/
|
|
#define POWER_DOWN_BANDGAP_REF (1 << 7) /* Power Down Bandgap Ref */
|
|
#define MASTER_BIAS_FILTER_BYPASS (1 << 6) /* Master Bias Filter Bypass */
|
|
#define MASTER_BIAS_REF_SEL (1 << 5) /* Master Bias Ref Sel */
|
|
#define MASTER_BIAS_TRIM(x) (((x) & 0x1F) << 0) /* Master Bias Trim<4:0> */
|
|
|
|
/*
|
|
* REG_BANDGAP_CONFIG1
|
|
*/
|
|
#define VCO_LDO_FILTER_BYPASS (1 << 7) /* VCO LDO Filter Bypass */
|
|
#define VCO_LDO_REF_SEL (1 << 6) /* VCO LDO Ref Sel */
|
|
#define BANDGAP_REF_RESET (1 << 5) /* Bandgap Ref Reset */
|
|
#define BANDGAP_TEMP_TRIM(x) (((x) & 0x1F) << 0) /* Bandgap Temp Trim<4:0> */
|
|
|
|
/*
|
|
* REG_REF_DIVIDE_CONFIG_1
|
|
*/
|
|
#define REF_DIVIDE_CONFIG_1_DFLT (1 << 2) /* Set to 1 */
|
|
#define RX_REF_RESET_BAR (1 << 1) /* Rx Ref Reset Bar */
|
|
#define RX_REF_DIVIDER_MSB (1 << 0) /* Rx Ref Divider<1> */
|
|
|
|
/*
|
|
* REG_REF_DIVIDE_CONFIG_2
|
|
*/
|
|
#define RX_REF_DIVIDER_LSB (1 << 7) /* Rx Ref Divider< 0> */
|
|
#define TX_REF_RESET_BAR (1 << 4) /* Tx Ref Reset Bar */
|
|
#define RX_REF_DOUBLER_FB_DELAY(x) (((x) & 0x3) << 5) /* Rx Ref Doubler FB Delay<1:0> */
|
|
#define TX_REF_DIVIDER(x) (((x) & 0x3) << 2) /* Tx Ref Divider<1:0> */
|
|
#define TX_REF_DOUBLER_FB_DELAY(x) (((x) & 0x3) << 0) /* Tx Ref Doubler FB Delay<1:0> */
|
|
|
|
/*
|
|
* REG_GAIN_RX1,2
|
|
*/
|
|
#define FULL_TABLE_GAIN_INDEX(x) (((x) & 0x7F) << 0) /* Full Table Gain Index Rx1/LMT Gain Rx1<6:0> */
|
|
|
|
/*
|
|
* REG_LPF_GAIN_RX1,2
|
|
*/
|
|
#define LPF_GAIN_RX(x) (((x) & 0x1F) << 0) /* LPF gain Rx1<4:0> */
|
|
|
|
/*
|
|
* REG_DIG_GAIN_RX1,2
|
|
*/
|
|
#define DIGITAL_GAIN_RX(x) (((x) & 0x1F) << 0) /* Digital gain Rx1<4:0> */
|
|
|
|
/*
|
|
* REG_FAST_ATTACK_STATE
|
|
*/
|
|
#define FAST_ATTACK_STATE_RX2(x) (((x) & 0x7) << 4) /* Fast Attack State Rx2<2:0> */
|
|
#define FAST_ATTACK_STATE_RX1(x) (((x) & 0x7) << 0) /* Fast Attack State Rx1<2:0> */
|
|
#define FAST_ATK_MASK 0x7
|
|
#define RX1_FAST_ATK_SHIFT 0
|
|
#define RX2_FAST_ATK_SHIFT 4
|
|
#define FAST_ATK_RESET 0
|
|
#define FAST_ATK_PEAK_DETECT 1
|
|
#define FAST_ATK_PWR_MEASURE 2
|
|
#define FAST_ATK_FINAL_SETTELING 3
|
|
#define FAST_ATK_FINAL_OVER 4
|
|
#define FAST_ATK_GAIN_LOCKED 5
|
|
|
|
/*
|
|
* REG_SLOW_LOOP_STATE
|
|
*/
|
|
#define SLOW_LOOP_STATE_RX2(x) (((x) & 0x7) << 4) /* Slow Loop State Rx2<2:0> */
|
|
#define SLOW_LOOP_STATE_RX1(x) (((x) & 0x7) << 0) /* Slow Loop State Rx1<2:0> */
|
|
|
|
|
|
/*
|
|
* REG_OVRG_SIGS_RX1,2
|
|
*/
|
|
#define GAIN_LOCK_1 (1 << 6) /* Gain Lock 1 */
|
|
#define LOW_POWER_1 (1 << 5) /* Low Power 1 */
|
|
#define LARGE_LMT_OL (1 << 4) /* Large LMT OL */
|
|
#define SMALL_LMT_OL (1 << 3) /* Small LMT OL */
|
|
#define LARGE_ADC_OL (1 << 2) /* Large ADC OL */
|
|
#define SMALL_ADC_OL (1 << 1) /* Small ADC OL */
|
|
#define DIG_SAT (1 << 0) /* Dig Sat */
|
|
/*
|
|
* REG_CTRL
|
|
*/
|
|
#define CTRL_ENABLE (1 << 0) /* Set to 1 */
|
|
|
|
/*
|
|
* REG_BIST_CONFIG
|
|
*/
|
|
#define TONE_PRBS (1 << 1) /* Tone/ PRBS */
|
|
#define BIST_ENABLE (1 << 0) /* BIST Enable */
|
|
#define TONE_FREQ(x) (((x) & 0x3) << 6) /* Tone Frequency<1:0> */
|
|
#define TONE_LEVEL(x) (((x) & 0x3) << 4) /* Tone Level<1:0> */
|
|
#define BIST_CTRL_POINT(x) (((x) & 0x3) << 2) /* BIST Control Point <1:0> */
|
|
|
|
/*
|
|
* REG_OBSERVE_CONFIG
|
|
*/
|
|
#define DATA_PORT_SP_HD_LOOP_TEST_OE (1 << 7) /* Data Port SP, HD Loop Test OE */
|
|
#define RX_MASK (1 << 6) /* Rx Mask */
|
|
#define CHANNEL (1 << 5) /* Channel */
|
|
#define DATA_PORT_LOOP_TEST_ENABLE (1 << 0) /* Data Port Loop Test Enable */
|
|
#define OBSERVATION_POINT(x) (((x) & 0xF) << 1) /* Observation Point<2:0> */
|
|
|
|
/*
|
|
* REG_BIST_AND_DATA_PORT_TEST_CONFIG
|
|
*/
|
|
#define BIST_MASK_CHANNEL_2_Q_DATA (1 << 5) /* BIST Mask Channel 2 Q data */
|
|
#define BIST_MASK_CHANNEL_2_I_DATA (1 << 4) /* BIST Mask Channel 2 I data */
|
|
#define BIST_MASK_CHANNEL_1_Q_DATA (1 << 3) /* BIST Mask Channel 1 Q data */
|
|
#define BIST_MASK_CHANNEL_1_I_DATA (1 << 2) /* BIST Mask Channel 1 I data */
|
|
#define DATA_PORT_HILOW (1 << 1) /* Data Port Hi/Low */
|
|
#define USE_DATA_PORT (1 << 0) /* Use Data Port */
|
|
#define TEMP_SENSE_VBE_TEST(x) (((x) & 0x3) << 6) /* Temp Sense Vbe Test<1:0> */
|
|
|
|
/*
|
|
* REG_DAC_TEST_2
|
|
*/
|
|
#define DAC_TEST_ENABLE (1 << 7) /* DAC Test Enable */
|
|
#define DAC_TEST_WORD(x) (((x) & 0x7F) << 0) /* DAC test Word <22:16> */
|
|
|
|
/*
|
|
* SPI Comm Helpers
|
|
*/
|
|
#define AD_READ (0 << 15)
|
|
#define AD_WRITE (1 << 15)
|
|
#define AD_CNT(x) ((((x) - 1) & 0x7) << 12)
|
|
#define AD_ADDR(x) ((x) & 0x3FF)
|
|
|
|
|
|
/*
|
|
* AD9361 Limits
|
|
*/
|
|
|
|
#define RSSI_MULTIPLIER 100
|
|
#define RSSI_RESOLUTION ((int) (0.25 * RSSI_MULTIPLIER))
|
|
#define RSSI_MAX_WEIGHT 255
|
|
|
|
#define MAX_LMT_INDEX 40
|
|
#define MAX_LPF_GAIN 24
|
|
#define MAX_DIG_GAIN 31
|
|
|
|
#define MAX_BBPLL_FREF 70007000UL /* 70 MHz + 100ppm */
|
|
#define MIN_BBPLL_FREQ 714928500UL /* 715 MHz - 100ppm */
|
|
#define MAX_BBPLL_FREQ 1430143000UL /* 1430 MHz + 100ppm */
|
|
#define MAX_BBPLL_DIV 64
|
|
#define MIN_BBPLL_DIV 2
|
|
|
|
/*
|
|
* The ADC minimum and maximum operating output data rates
|
|
* are 25MHz and 640MHz respectively.
|
|
* For more information see here: https://ez.analog.com/docs/DOC-12763
|
|
*/
|
|
|
|
#define MIN_ADC_CLK 25000000UL /* 25 MHz */
|
|
//#define MIN_ADC_CLK (MIN_BBPLL_FREQ / MAX_BBPLL_DIV) /* 11.17MHz */
|
|
#define MAX_ADC_CLK 640000000UL /* 640 MHz */
|
|
#define MAX_DAC_CLK (MAX_ADC_CLK / 2)
|
|
|
|
/* Associated with outputs of stage */
|
|
#define MAX_RX_HB1 245760000UL
|
|
#define MAX_RX_HB2 320000000UL
|
|
#define MAX_RX_HB3 640000000UL
|
|
/* Associated with inputs of stage */
|
|
#define MAX_TX_HB1 160000000UL
|
|
#define MAX_TX_HB2 320000000UL
|
|
#define MAX_TX_HB3 320000000UL
|
|
|
|
#define MAX_BASEBAND_RATE 61440000UL
|
|
|
|
#define MAX_MBYTE_SPI 8
|
|
|
|
#define RFPLL_MODULUS 8388593UL
|
|
#define BBPLL_MODULUS 2088960UL
|
|
|
|
#define MAX_SYNTH_FREF 80008000UL /* 80 MHz + 100ppm */
|
|
#define MIN_SYNTH_FREF 9999000UL /* 10 MHz - 100ppm */
|
|
#define MIN_VCO_FREQ_HZ 6000000000ULL
|
|
|
|
#define MAX_CARRIER_FREQ_HZ 6000000000ULL
|
|
#define MIN_RX_CARRIER_FREQ_HZ 70000000ULL
|
|
#define MIN_TX_CARRIER_FREQ_HZ 46875001ULL
|
|
|
|
#define AD9363A_MAX_CARRIER_FREQ_HZ 3800000000ULL
|
|
#define AD9363A_MIN_CARRIER_FREQ_HZ 325000000ULL
|
|
|
|
#define MAX_GAIN_TABLE_SIZE 90
|
|
#define MAX_NUM_GAIN_TABLES 16 /* randomly picked */
|
|
|
|
#endif
|