ExternalVendorCode/openwifi
1
0
Fork 0
mirror of https://github.com/open-sdr/openwifi.git synced 2024-12-18 21:28:07 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
openwifi/driver/sdrctl_intf.c

440 lines
19 KiB
C
Raw Permalink Blame History

// Author: Xianjun Jiao, Michael Mehari, Wei Liu
// SPDX-FileCopyrightText: 2019 UGent
// SPDX-License-Identifier: AGPL-3.0-or-later
static int openwifi_testmode_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif, void *data, int len)
{
struct openwifi_priv *priv = hw->priv;
struct nlattr *tb[OPENWIFI_ATTR_MAX + 1];
struct sk_buff *skb;
int err;
u32 tmp=-1, reg_cat, reg_addr, reg_val, reg_addr_idx, tsft_high, tsft_low;
int tmp_int;
err = nla_parse(tb, OPENWIFI_ATTR_MAX, data, len, openwifi_testmode_policy, NULL);
if (err)
return err;
if (!tb[OPENWIFI_ATTR_CMD])
return -EINVAL;
switch (nla_get_u32(tb[OPENWIFI_ATTR_CMD])) {
case OPENWIFI_CMD_SET_GAP:
if (!tb[OPENWIFI_ATTR_GAP])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_GAP]);
printk("%s XPU_REG_CSMA_CFG_write %08x (Check openwifi_conf_tx() in sdr.c to understand)\n", sdr_compatible_str, tmp);
xpu_api->XPU_REG_CSMA_CFG_write(tmp); // unit us
return 0;
case OPENWIFI_CMD_GET_GAP:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
tmp = xpu_api->XPU_REG_CSMA_CFG_read();
if (nla_put_u32(skb, OPENWIFI_ATTR_GAP, tmp))
goto nla_put_failure;
return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_SLICE_IDX:
if (!tb[OPENWIFI_ATTR_SLICE_IDX])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_IDX]);
printk("%s set openwifi slice_idx in hex: %08x\n", sdr_compatible_str, tmp);
if (tmp == MAX_NUM_HW_QUEUE) {
printk("%s set openwifi slice_idx reset all queue counter.\n", sdr_compatible_str);
xpu_api->XPU_REG_MULTI_RST_write(1<<7); //bit7 reset the counter for all queues at the same time
xpu_api->XPU_REG_MULTI_RST_write(0<<7);
} else {
priv->slice_idx = tmp;
}
return 0;
case OPENWIFI_CMD_GET_SLICE_IDX:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
tmp = priv->slice_idx;
if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_IDX, tmp))
goto nla_put_failure;
printk("%s get openwifi slice_idx in hex: %08x\n", sdr_compatible_str, tmp);
return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_ADDR:
if (!tb[OPENWIFI_ATTR_ADDR])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_ADDR]);
if (priv->slice_idx>=MAX_NUM_HW_QUEUE) {
printk("%s set openwifi slice_target_mac_addr(low32) WARNING: current slice idx %d is invalid!\n", sdr_compatible_str, priv->slice_idx);
return -EOPNOTSUPP;
} else {
printk("%s set openwifi slice_target_mac_addr(low32) in hex: %08x to slice %d\n", sdr_compatible_str, tmp, priv->slice_idx);
priv->dest_mac_addr_queue_map[priv->slice_idx] = reverse32(tmp);
}
return 0;
case OPENWIFI_CMD_GET_ADDR:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
if (priv->slice_idx>=MAX_NUM_HW_QUEUE) {
tmp = -1;
} else {
tmp = reverse32(priv->dest_mac_addr_queue_map[priv->slice_idx]);
}
if (nla_put_u32(skb, OPENWIFI_ATTR_ADDR, tmp))
goto nla_put_failure;
printk("%s get openwifi slice_target_mac_addr(low32) in hex: %08x of slice %d\n", sdr_compatible_str, tmp, priv->slice_idx);
return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_SLICE_TOTAL:
if (!tb[OPENWIFI_ATTR_SLICE_TOTAL])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_TOTAL]);
if (priv->slice_idx>=MAX_NUM_HW_QUEUE) {
printk("%s set SLICE_TOTAL(duration) WARNING: current slice idx %d is invalid!\n", sdr_compatible_str, priv->slice_idx);
return -EOPNOTSUPP;
} else {
printk("%s set SLICE_TOTAL(duration) %d usec to slice %d\n", sdr_compatible_str, tmp, priv->slice_idx);
xpu_api->XPU_REG_SLICE_COUNT_TOTAL_write((priv->slice_idx<<20)|tmp);
}
return 0;
case OPENWIFI_CMD_GET_SLICE_TOTAL:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
tmp = (xpu_api->XPU_REG_SLICE_COUNT_TOTAL_read());
printk("%s get SLICE_TOTAL(duration) %d usec of slice %d\n", sdr_compatible_str, tmp&0xFFFFF, tmp>>20);
if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_TOTAL, tmp))
goto nla_put_failure;
return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_SLICE_START:
if (!tb[OPENWIFI_ATTR_SLICE_START])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_START]);
if (priv->slice_idx>=MAX_NUM_HW_QUEUE) {
printk("%s set SLICE_START(duration) WARNING: current slice idx %d is invalid!\n", sdr_compatible_str, priv->slice_idx);
return -EOPNOTSUPP;
} else {
printk("%s set SLICE_START(duration) %d usec to slice %d\n", sdr_compatible_str, tmp, priv->slice_idx);
xpu_api->XPU_REG_SLICE_COUNT_START_write((priv->slice_idx<<20)|tmp);
}
return 0;
case OPENWIFI_CMD_GET_SLICE_START:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
tmp = (xpu_api->XPU_REG_SLICE_COUNT_START_read());
printk("%s get SLICE_START(duration) %d usec of slice %d\n", sdr_compatible_str, tmp&0xFFFFF, tmp>>20);
if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_START, tmp))
goto nla_put_failure;
return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_SLICE_END:
if (!tb[OPENWIFI_ATTR_SLICE_END])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_END]);
if (priv->slice_idx>=MAX_NUM_HW_QUEUE) {
printk("%s set SLICE_END(duration) WARNING: current slice idx %d is invalid!\n", sdr_compatible_str, priv->slice_idx);
return -EOPNOTSUPP;
} else {
printk("%s set SLICE_END(duration) %d usec to slice %d\n", sdr_compatible_str, tmp, priv->slice_idx);
xpu_api->XPU_REG_SLICE_COUNT_END_write((priv->slice_idx<<20)|tmp);
}
return 0;
case OPENWIFI_CMD_GET_SLICE_END:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
tmp = (xpu_api->XPU_REG_SLICE_COUNT_END_read());
printk("%s get SLICE_END(duration) %d usec of slice %d\n", sdr_compatible_str, tmp&0xFFFFF, tmp>>20);
if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_END, tmp))
goto nla_put_failure;
return cfg80211_testmode_reply(skb);
// case OPENWIFI_CMD_SET_SLICE_TOTAL1:
// if (!tb[OPENWIFI_ATTR_SLICE_TOTAL1])
// return -EINVAL;
// tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_TOTAL1]);
// printk("%s set SLICE_TOTAL1(duration) to %d usec\n", sdr_compatible_str, tmp);
// // xpu_api->XPU_REG_SLICE_COUNT_TOTAL1_write(tmp);
// return 0;
// case OPENWIFI_CMD_GET_SLICE_TOTAL1:
// skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
// if (!skb)
// return -ENOMEM;
// // tmp = (xpu_api->XPU_REG_SLICE_COUNT_TOTAL1_read());
// if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_TOTAL1, tmp))
// goto nla_put_failure;
// return cfg80211_testmode_reply(skb);
// case OPENWIFI_CMD_SET_SLICE_START1:
// if (!tb[OPENWIFI_ATTR_SLICE_START1])
// return -EINVAL;
// tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_START1]);
// printk("%s set SLICE_START1(duration) to %d usec\n", sdr_compatible_str, tmp);
// // xpu_api->XPU_REG_SLICE_COUNT_START1_write(tmp);
// return 0;
// case OPENWIFI_CMD_GET_SLICE_START1:
// skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
// if (!skb)
// return -ENOMEM;
// // tmp = (xpu_api->XPU_REG_SLICE_COUNT_START1_read());
// if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_START1, tmp))
// goto nla_put_failure;
// return cfg80211_testmode_reply(skb);
// case OPENWIFI_CMD_SET_SLICE_END1:
// if (!tb[OPENWIFI_ATTR_SLICE_END1])
// return -EINVAL;
// tmp = nla_get_u32(tb[OPENWIFI_ATTR_SLICE_END1]);
// printk("%s set SLICE_END1(duration) to %d usec\n", sdr_compatible_str, tmp);
// // xpu_api->XPU_REG_SLICE_COUNT_END1_write(tmp);
// return 0;
// case OPENWIFI_CMD_GET_SLICE_END1:
// skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
// if (!skb)
// return -ENOMEM;
// // tmp = (xpu_api->XPU_REG_SLICE_COUNT_END1_read());
// if (nla_put_u32(skb, OPENWIFI_ATTR_SLICE_END1, tmp))
// goto nla_put_failure;
// return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_RSSI_TH:
if (!tb[OPENWIFI_ATTR_RSSI_TH])
return -EINVAL;
tmp = nla_get_u32(tb[OPENWIFI_ATTR_RSSI_TH]);
// printk("%s set RSSI_TH to %d\n", sdr_compatible_str, tmp);
// xpu_api->XPU_REG_LBT_TH_write(tmp);
// return 0;
printk("%s WARNING Please use command: sdrctl dev sdr0 set reg drv_xpu 0 reg_value! (1~2047, 0 means AUTO)!\n", sdr_compatible_str);
return -EOPNOTSUPP;
case OPENWIFI_CMD_GET_RSSI_TH:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
tmp_int = rssi_half_db_to_rssi_dbm(xpu_api->XPU_REG_LBT_TH_read(), priv->rssi_correction); //rssi_dbm
tmp = (-tmp_int);
if (nla_put_u32(skb, OPENWIFI_ATTR_RSSI_TH, tmp))
goto nla_put_failure;
return cfg80211_testmode_reply(skb);
case OPENWIFI_CMD_SET_TSF:
printk("openwifi_set_tsf_1");
if ( (!tb[OPENWIFI_ATTR_HIGH_TSF]) || (!tb[OPENWIFI_ATTR_LOW_TSF]) )
return -EINVAL;
printk("openwifi_set_tsf_2");
tsft_high = nla_get_u32(tb[OPENWIFI_ATTR_HIGH_TSF]);
tsft_low = nla_get_u32(tb[OPENWIFI_ATTR_LOW_TSF]);
xpu_api->XPU_REG_TSF_LOAD_VAL_write(tsft_high,tsft_low);
printk("%s openwifi_set_tsf: %08x%08x\n", sdr_compatible_str,tsft_high,tsft_low);
return 0;
case REG_CMD_SET:
if ( (!tb[REG_ATTR_ADDR]) || (!tb[REG_ATTR_VAL]) )
return -EINVAL;
reg_addr = nla_get_u32(tb[REG_ATTR_ADDR]);
reg_val = nla_get_u32(tb[REG_ATTR_VAL]);
reg_cat = ((reg_addr>>16)&0xFFFF);
reg_addr = (reg_addr&0xFFFF);
reg_addr_idx = (reg_addr>>2);
printk("%s recv set cmd reg cat %d addr %08x val %08x idx %d\n", sdr_compatible_str, reg_cat, reg_addr, reg_val, reg_addr_idx);
if (reg_cat==SDRCTL_REG_CAT_RF) {
// printk("%s WARNING reg cat 1 (rf) is not supported yet!\n", sdr_compatible_str);
// return -EOPNOTSUPP;
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_RF_REG) {
priv->rf_reg_val[reg_addr_idx]=reg_val;
if (reg_addr_idx==RF_TX_REG_IDX_ATT) {//change the tx ON att (if a RF chain is ON)
tmp = ad9361_get_tx_atten(priv->ad9361_phy, 1);
printk("%s ad9361_get_tx_atten ant0 %d\n",sdr_compatible_str, tmp);
if (tmp<AD9361_RADIO_OFF_TX_ATT) {
err = ad9361_set_tx_atten(priv->ad9361_phy, AD9361_RADIO_ON_TX_ATT+reg_val, true, false, true);
if (err < 0) {
printk("%s WARNING ad9361_set_tx_atten ant0 %d FAIL!\n",sdr_compatible_str, AD9361_RADIO_ON_TX_ATT+reg_val);
return -EIO;
} else {
printk("%s ad9361_set_tx_atten ant0 %d OK\n",sdr_compatible_str, AD9361_RADIO_ON_TX_ATT+reg_val);
}
}
tmp = ad9361_get_tx_atten(priv->ad9361_phy, 2);
printk("%s ad9361_get_tx_atten ant1 %d\n",sdr_compatible_str, tmp);
if (tmp<AD9361_RADIO_OFF_TX_ATT) {
err = ad9361_set_tx_atten(priv->ad9361_phy, AD9361_RADIO_ON_TX_ATT+reg_val, false, true, true);
if (err < 0) {
printk("%s WARNING ad9361_set_tx_atten ant1 %d FAIL!\n",sdr_compatible_str, AD9361_RADIO_ON_TX_ATT+reg_val);
return -EIO;
} else {
printk("%s ad9361_set_tx_atten ant1 %d OK\n",sdr_compatible_str, AD9361_RADIO_ON_TX_ATT+reg_val);
}
}
} else if (reg_addr_idx==RF_TX_REG_IDX_FREQ_MHZ) { // apply the tx fo
clk_set_rate(priv->ad9361_phy->clks[TX_RFPLL], ( ((u64)1000000ull)*((u64)priv->rf_reg_val[RF_TX_REG_IDX_FREQ_MHZ]) )>>1 );
ad9361_tx_calibration(priv, priv->rf_reg_val[RF_TX_REG_IDX_FREQ_MHZ]);
printk("%s clk_set_rate TX_RFPLL %dMHz done\n",sdr_compatible_str, priv->rf_reg_val[RF_TX_REG_IDX_FREQ_MHZ]);
} else if (reg_addr_idx==RF_RX_REG_IDX_FREQ_MHZ) { // apply the rx fo
clk_set_rate(priv->ad9361_phy->clks[RX_RFPLL], ( ((u64)1000000ull)*((u64)priv->rf_reg_val[RF_RX_REG_IDX_FREQ_MHZ]) )>>1 );
openwifi_rf_rx_update_after_tuning(priv, priv->rf_reg_val[RF_RX_REG_IDX_FREQ_MHZ]);
printk("%s clk_set_rate RX_RFPLL %dMHz done\n",sdr_compatible_str, priv->rf_reg_val[RF_RX_REG_IDX_FREQ_MHZ]);
}
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else if (reg_cat==SDRCTL_REG_CAT_RX_INTF)
rx_intf_api->reg_write(reg_addr,reg_val);
else if (reg_cat==SDRCTL_REG_CAT_TX_INTF)
tx_intf_api->reg_write(reg_addr,reg_val);
else if (reg_cat==SDRCTL_REG_CAT_RX)
openofdm_rx_api->reg_write(reg_addr,reg_val);
else if (reg_cat==SDRCTL_REG_CAT_TX)
openofdm_tx_api->reg_write(reg_addr,reg_val);
else if (reg_cat==SDRCTL_REG_CAT_XPU)
xpu_api->reg_write(reg_addr,reg_val);
else if (reg_cat==SDRCTL_REG_CAT_DRV_RX) {
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_DRV_REG) {
if (reg_addr_idx==DRV_RX_REG_IDX_ANT_CFG) {
tmp = openwifi_set_antenna(hw, (priv->drv_tx_reg_val[reg_addr_idx]==0?1:2), (reg_val==0?1:2));
if (tmp) {
printk("%s WARNING openwifi_set_antenna return %d!\n", sdr_compatible_str, tmp);
return -EIO;
} else {
priv->drv_rx_reg_val[reg_addr_idx]=reg_val;
}
} else {
priv->drv_rx_reg_val[reg_addr_idx]=reg_val;
if (reg_addr_idx==DRV_RX_REG_IDX_DEMOD_TH) {
openofdm_rx_api->OPENOFDM_RX_REG_POWER_THRES_write((OPENOFDM_RX_DC_RUNNING_SUM_TH_INIT<<16)|rssi_dbm_to_rssi_half_db((reg_val==0?OPENOFDM_RX_RSSI_DBM_TH_DEFAULT:(-reg_val)), priv->rssi_correction));
}
}
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else if (reg_cat==SDRCTL_REG_CAT_DRV_TX) {
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_DRV_REG) {
if ((reg_addr_idx == DRV_TX_REG_IDX_RATE || reg_addr_idx == DRV_TX_REG_IDX_RATE_HT) &&
(reg_val != 0 && (!((reg_val&0xF)>=4 && (reg_val&0xF)<=11)) ) ) {
printk("%s WARNING rate override value should be 0 or 4~11!\n", sdr_compatible_str);
return -EOPNOTSUPP;
} else {
if (reg_addr_idx==DRV_TX_REG_IDX_ANT_CFG) {
tmp = openwifi_set_antenna(hw, reg_val+1, priv->drv_rx_reg_val[reg_addr_idx]+1);
if (tmp) {
printk("%s WARNING openwifi_set_antenna return %d!\n", sdr_compatible_str, tmp);
return -EIO;
} else {
priv->drv_tx_reg_val[reg_addr_idx]=reg_val;
}
} else {
priv->drv_tx_reg_val[reg_addr_idx]=reg_val;
}
}
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else if (reg_cat==SDRCTL_REG_CAT_DRV_XPU) {
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_DRV_REG) {
priv->drv_xpu_reg_val[reg_addr_idx]=reg_val;
if (reg_addr_idx==DRV_XPU_REG_IDX_LBT_TH) {
if (reg_val) {
tmp_int = (-reg_val); // rssi_dbm
tmp = rssi_dbm_to_rssi_half_db(tmp_int, priv->rssi_correction);
xpu_api->XPU_REG_LBT_TH_write( tmp );
printk("%s override FPGA LBT threshold to %d(%ddBm). The last_auto_fpga_lbt_th %d(%ddBm). rssi corr %d (%d/%dMHz)\n", sdr_compatible_str, tmp, tmp_int, priv->last_auto_fpga_lbt_th, rssi_half_db_to_rssi_dbm(priv->last_auto_fpga_lbt_th, priv->rssi_correction), priv->rssi_correction, priv->actual_tx_lo, priv->actual_rx_lo);
} else {
xpu_api->XPU_REG_LBT_TH_write(priv->last_auto_fpga_lbt_th);
printk("%s Restore last_auto_fpga_lbt_th %d(%ddBm) to FPGA. ad9361_rf_set_channel will take control. rssi corr %d (%d/%dMHz)\n", sdr_compatible_str, priv->last_auto_fpga_lbt_th, rssi_half_db_to_rssi_dbm(priv->last_auto_fpga_lbt_th, priv->rssi_correction), priv->rssi_correction, priv->actual_tx_lo, priv->actual_rx_lo);
}
}
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else {
printk("%s WARNING reg cat %d is not supported yet!\n", sdr_compatible_str, reg_cat);
return -EOPNOTSUPP;
}
return 0;
case REG_CMD_GET:
skb = (struct sk_buff *)cfg80211_testmode_alloc_reply_skb(hw->wiphy, nla_total_size(sizeof(u32)));
if (!skb)
return -ENOMEM;
reg_addr = nla_get_u32(tb[REG_ATTR_ADDR]);
reg_cat = ((reg_addr>>16)&0xFFFF);
reg_addr = (reg_addr&0xFFFF);
reg_addr_idx = (reg_addr>>2);
printk("%s recv get cmd reg cat %d addr %08x idx %d\n", sdr_compatible_str, reg_cat, reg_addr, reg_addr_idx);
if (reg_cat==SDRCTL_REG_CAT_RF) {
// printk("%s WARNING reg cat 1 (rf) is not supported yet!\n", sdr_compatible_str);
// tmp = 0xFFFFFFFF;
// return -EOPNOTSUPP;
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_RF_REG) {
tmp = priv->rf_reg_val[reg_addr_idx];
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else if (reg_cat==SDRCTL_REG_CAT_RX_INTF)
tmp = rx_intf_api->reg_read(reg_addr);
else if (reg_cat==SDRCTL_REG_CAT_TX_INTF)
tmp = tx_intf_api->reg_read(reg_addr);
else if (reg_cat==SDRCTL_REG_CAT_RX)
tmp = openofdm_rx_api->reg_read(reg_addr);
else if (reg_cat==SDRCTL_REG_CAT_TX)
tmp = openofdm_tx_api->reg_read(reg_addr);
else if (reg_cat==SDRCTL_REG_CAT_XPU)
tmp = xpu_api->reg_read(reg_addr);
else if (reg_cat==SDRCTL_REG_CAT_DRV_RX) {
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_DRV_REG) {
tmp = priv->drv_rx_reg_val[reg_addr_idx];
if (reg_addr_idx==DRV_RX_REG_IDX_ANT_CFG)
openwifi_get_antenna(hw, &tsft_high, &tsft_low);
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else if (reg_cat==SDRCTL_REG_CAT_DRV_TX) {
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_DRV_REG) {
tmp = priv->drv_tx_reg_val[reg_addr_idx];
if (reg_addr_idx==DRV_TX_REG_IDX_ANT_CFG)
openwifi_get_antenna(hw, &tsft_high, &tsft_low);
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else if (reg_cat==SDRCTL_REG_CAT_DRV_XPU) {
if (reg_addr_idx>=0 && reg_addr_idx<MAX_NUM_DRV_REG) {
if (reg_addr_idx==DRV_XPU_REG_IDX_LBT_TH) {
tmp = xpu_api->XPU_REG_LBT_TH_read();//rssi_half_db
tmp_int = rssi_half_db_to_rssi_dbm(tmp, priv->rssi_correction); //rssi_dbm
printk("%s FPGA LBT threshold %d(%ddBm). The last_auto_fpga_lbt_th %d(%ddBm). rssi corr %d (%d/%dMHz)\n", sdr_compatible_str, tmp, tmp_int, priv->last_auto_fpga_lbt_th, rssi_half_db_to_rssi_dbm(priv->last_auto_fpga_lbt_th, priv->rssi_correction), priv->rssi_correction, priv->actual_tx_lo, priv->actual_rx_lo);
}
tmp = priv->drv_xpu_reg_val[reg_addr_idx];
} else {
printk("%s WARNING reg_addr_idx %d is out of range!\n", sdr_compatible_str, reg_addr_idx);
return -EOPNOTSUPP;
}
}
else {
printk("%s WARNING reg cat %d is not supported yet!\n", sdr_compatible_str, reg_cat);
return -EOPNOTSUPP;
}
if (nla_put_u32(skb, REG_ATTR_VAL, tmp))
goto nla_put_failure;
return cfg80211_testmode_reply(skb);
default:
return -EOPNOTSUPP;
}
nla_put_failure:
dev_kfree_skb(skb);
return -ENOBUFS;
}
Reference in New Issue View Git Blame Copy Permalink