ExternalVendorCode/openwifi
1
0
Fork 0
mirror of https://github.com/open-sdr/openwifi.git synced 2024-12-24 07:46:54 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add hostapd password into README

Browse Source
This commit is contained in:
Xianjun Jiao 2023-03-07 13:47:19 +01:00
parent 69b9cfdbd7
commit fa0c310b2a
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -104,7 +104,7 @@ neptunesdr|Low cost Zynq 7020 + AD9361 board|**NO** need
(Use "./fosdem-11ag.sh" to force 11a/g mode)
```
**NOTE** adrv9361z7035 has ultra low TX power in 5GHz. Move **CLOSER** when you use that board in 5GHz!!!
- After you see the "openwifi" SSID on your device (Phone/Laptop/etc), connect it (If not get 192.168.13.* IP automatically, check [known issue](doc/known_issue/notter.md)). Browser to 192.168.13.1 on your device, you should see the webpage hosted by the webserver on board.
- After you see the "openwifi" SSID on your device (Phone/Laptop/etc), connect it (password: openwifi). If not get 192.168.13.* IP automatically, check [known issue](doc/known_issue/notter.md). Browser to 192.168.13.1 on your device, you should see the webpage hosted by the webserver on board.
- Note 1: If your device doesn't support 5GHz (ch44), please change the **hostapd-openwifi.conf** on board and re-run fosdem.sh.
- Note 2: After ~2 hours, the Viterbi decoder will halt (Xilinx Evaluation License). Just reload FPGA ([method](doc/app_notes/drv_fpga_dynamic_loading.md)) or simply power cycle the board if it happens. (If output of "./sdrctl dev sdr0 get reg rx 20" is always the same, it means the decoder halts)
- To give the Wi-Fi client internet access, configure routing/NAT **on the PC**: