ExternalVendorCode/openwifi
1
0
Fork 0
mirror of https://github.com/open-sdr/openwifi.git synced 2024-12-30 02:29:14 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

sync with openwifi-hw new structure

Browse Source
This commit is contained in:
Xianjun Jiao 2020-01-14 16:17:51 +01:00
parent 37c0c63943
commit 9e696164ed
2 changed files with 15 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
README.md
View File

@ -33,11 +33,19 @@ Openwifi was born in [ORCA project](https://www.orca-project.eu/) (EU's Horizon2
**Supported SDR platforms:**
* zc706 (Xilinx) + fmcomms2/3/4 (Analog Devices)
* On roadmap: ADRV9361-Z7035/ADRV9364-Z7020 + ADRV1CRR-BOB (Analog Devices)
* On roadmap: zcu102 (Xilinx) + fmcomms2/3/4/ADRV9371 (Analog Devices)
board_name|actual boards used|status
-------|-------|----
zc706_fmcs2|Xilinx ZC706 dev board + FMCOMMS2/3/4|done
adrv9361z7035|ADRV9361Z7035 SOM + ADRV1CRR-BOB carrier board|ongoing
adrv9361z7035_fmc|ADRV9361Z7035 SOM + ADRV1CRR-FMC carrier board|ongoing
adrv9364z7020|ADRV9364Z7020 SOM + ADRV1CRR-BOB carrier board|future
zcu102_fmcs2|Xilinx ZCU102 dev board + FMCOMMS2/3/4|future
zcu102_9371|Xilinx ZCU102 dev board + ADRV9371|future
* board_name is used to identify FPGA design in openwifi-hw/boards/
* Don't have any boards? Or you like JTAG boot instead of SD card? Check our test bed [w-iLab.t](https://doc.ilabt.imec.be/ilabt/wilab/tutorials/openwifi.html) tutorial.
* zc706_fmcs2 is taken as example for following operations.
**Quick start:** (Example instructions are verified on Ubuntu 16/18)
* Download pre-built [openwifi Linux img file](https://users.ugent.be/~xjiao/openwifi-1.0.0-ghent.zip). Burn the img file to a 16G SD card:
@ -47,7 +55,7 @@ sudo dd bs=4M if=openwifi-1.0.0-ghent.img of=/dev/mmcblk0
(mmcblk0 is the dev name of sdcard in Linux. Make sure you use the correct one in your situation!)
(Above command takes a while)
```
* Connect RX/TX antenna to RX1A/TX2A ports of your zc706+fmcomms2/3 platform, and make two antennas orthogonal to each other for good isolation. Config zc706 to SD card boot mode by switches (Read zc706 board spec on internet). Insert the SD card to zc706. (For fmcomms4/ad9364, you may connect antennas to TXA/RXA)
* Connect RX/TX antenna to RX1A/TX2A ports of fmcomms2/3(For fmcomms4/ad9364, you may connect antennas to TXA/RXA), and make two antennas orthogonal to each other for good isolation. Config the board to SD card boot mode by switches (Read the board spec on internet). Insert the SD card to the board.
* Connect the board to PC. (PC IP address should be 192.168.10.1). Power on the board. Then from PC:
@ -144,7 +152,7 @@ dtc -I dts -O dtb -o devicetree.dtb devicetree.dts
```
cd $OPENWIFI_DIR/kernel_boot
source $XILINX_DIR/SDK/2017.4/settings64.sh
./build_boot_bin.sh ../openwifi-hw/zc706_fmcs2/sdk/system_top_hw_platform_0/system.hdf u-boot-zc70x.elf
./build_boot_bin.sh ../openwifi-hw/boards/zc706_fmcs2/sdk/system_top_hw_platform_0/system.hdf u-boot-zc70x.elf
(u-boot-zc70x.elf is included in the original Analog Devices Linux img)
```
* Download [2017_R1-2018_01_29.img.xz](http://swdownloads.analog.com/cse/2017_R1-2018_01_29.img.xz) from [Analog Devices Wiki](https://wiki.analog.com/resources/tools-software/linux-software/zynq_images). Burn it into a SD card via your PC.

2
openwifi-hw

@ -1 +1 @@
Subproject commit 73bfc526d636294a569452e9e0dfbb16c080bc35
Subproject commit f8a54d6e875b601b58fef74bfb3ae4307a05acd2