ExternalVendorCode/openwifi
1
0
Fork 0
mirror of https://github.com/open-sdr/openwifi.git synced 2025-01-18 18:56:24 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Minor spelling fix in the README (#128)

Browse Source
This commit is contained in:
Daniel Bovensiepen Li 2021-12-11 02:20:42 +08:00 committed by GitHub
parent 151574ece8
commit 0a9ca3b0a6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -89,7 +89,7 @@ zcu102_9371|[Xilinx ZCU102 board](https://www.xilinx.com/products/boards-and-kit
- After you see the "openwifi" SSID on your device (Phone/Laptop/etc), connect it. Browser to 192.168.13.1 on your device, you should see the webpage hosted by the webserver on board.
- Note 1: If your device doesn't support 5GHz (ch44), please change the **hostapd-openwifi.conf** on board and re-run fosdem.sh.
- Note 2: After ~2 hours, the Viterbi decoder will halt (Xilinx Evaluation License). Just power cycle the board if it happens. (If output of "./sdrctl dev sdr0 get reg rx 20" is always the same, it means the decoder halts)
- To give the Wi-Fii client internet access, configure routing/NAT **on the PC**:
- To give the Wi-Fi client internet access, configure routing/NAT **on the PC**:
```
sudo sysctl -w net.ipv4.ip_forward=1
sudo iptables -t nat -A POSTROUTING -o NICY -j MASQUERADE