From f08c76ca3d637ac21bbed7f19b461be1ace7f40f Mon Sep 17 00:00:00 2001
From: Xianjun Jiao <xianjun.jiao@ugent.be>
Date: Tue, 15 Mar 2022 16:03:40 +0100
Subject: [PATCH] Add signal_watchdog module to prevent fake demod in early
 phase: 1. If strong DC or low frequency sing wave like signal (suspect it is
 generated by ad9361 during some self-calibration like operation), put the
 receiver into reset 2. If the signal/header is valid, but the packet length
 is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the
 receiver

---
 openofdm_rx.tcl               | 1549 +++++++++++++++++----------------
 openofdm_rx_ultra_scale.tcl   | 1543 ++++++++++++++++----------------
 verilog/dot11_tb.v            |   27 +-
 verilog/openofdm_rx.v         |   25 +-
 verilog/running_sum.v         |   93 ++
 verilog/running_sum_dual_ch.v |  103 +++
 verilog/signal_watchdog.v     |   68 ++
 7 files changed, 1870 insertions(+), 1538 deletions(-)
 create mode 100644 verilog/running_sum.v
 create mode 100644 verilog/running_sum_dual_ch.v
 create mode 100644 verilog/signal_watchdog.v

diff --git a/openofdm_rx.tcl b/openofdm_rx.tcl
index 9140d76..b24ca48 100644
--- a/openofdm_rx.tcl
+++ b/openofdm_rx.tcl
@@ -1,769 +1,780 @@
-#*****************************************************************************************
-# 
-# By xianjun.jiao@imec.be; wei.liu@imec.be
-# 
-# Generated by Vivado on Mon Jan 21 11:32:41 +0100 2019
-# IP Build 2095745 on Tue Jan 30 17:13:15 MST 2018
-#
-# This file contains the Vivado Tcl commands for re-creating the project to the state*
-# when this script was generated. In order to re-create the project, please source this
-# file in the Vivado Tcl Shell.
-#
-# * Note that the runs in the created project will be configured the same way as the
-#   original project, however they will not be launched automatically. To regenerate the
-#   run results please launch the synthesis/implementation runs as needed.
-#
-#
-#*****************************************************************************************
-
-# -----------generate openofdm_rx_git_rev.v---------------
-set  fd  [open  "./verilog/openofdm_rx_git_rev.v"  w]
-set HASHCODE [exec ./get_git_rev.sh]
-puts $fd "`define OPENOFDM_RX_GIT_REV (32'h$HASHCODE)"
-close $fd
-# ----end of generate openofdm_rx_git_rev.v---------------
-
-# Set the reference directory for source file relative paths (by default the value is script directory path)
-set origin_dir [file dirname [info script]]
-
-# Use origin directory path location variable, if specified in the tcl shell
-if { [info exists ::origin_dir_loc] } {
-  set origin_dir $::origin_dir_loc
-}
-
-# Set the project name
-set project_name "openofdm_rx"
-exec rm -rf $project_name
-
-# Use project name variable, if specified in the tcl shell
-if { [info exists ::user_project_name] } {
-  set project_name $::user_project_name
-}
-
-variable script_file
-set script_file "openofdm_rx.tcl"
-
-# Help information for this script
-proc help {} {
-  variable script_file
-  puts "\nDescription:"
-  puts "Recreate a Vivado project from this script. The created project will be"
-  puts "functionally equivalent to the original project for which this script was"
-  puts "generated. The script contains commands for creating a project, filesets,"
-  puts "runs, adding/importing sources and setting properties on various objects.\n"
-  puts "Syntax:"
-  puts "$script_file"
-  puts "$script_file -tclargs \[--origin_dir <path>\]"
-  puts "$script_file -tclargs \[--project_name <name>\]"
-  puts "$script_file -tclargs \[--help\]\n"
-  puts "Usage:"
-  puts "Name                   Description"
-  puts "-------------------------------------------------------------------------"
-  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
-  puts "                       origin_dir path value is \".\", otherwise, the value"
-  puts "                       that was set with the \"-paths_relative_to\" switch"
-  puts "                       when this script was generated.\n"
-  puts "\[--project_name <name>\] Create project with the specified name. Default"
-  puts "                       name is the name of the project from where this"
-  puts "                       script was generated.\n"
-  puts "\[--help\]               Print help information for this script"
-  puts "-------------------------------------------------------------------------\n"
-  exit 0
-}
-
-if { $::argc > 0 } {
-  for {set i 0} {$i < [llength $::argc]} {incr i} {
-    set option [string trim [lindex $::argv $i]]
-    switch -regexp -- $option {
-      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
-      "--project_name" { incr i; set project_name [lindex $::argv $i] }
-      "--help"         { help }
-      default {
-        if { [regexp {^-} $option] } {
-          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
-          return 1
-        }
-      }
-    }
-  }
-}
-
-# Set the directory path for the original project from where this script was exported
-set src_dir "[file normalize "$origin_dir/verilog"]"
-
-# Create project
-create_project ${project_name} ./${project_name} -part xc7z045ffg900-2
-
-# Set the directory path for the new project
-set proj_dir [get_property directory [current_project]]
-
-# Reconstruct message rules
-# None
-
-# Set project properties
-set obj [current_project]
-set_property -name "board_connections" -value "" -objects $obj
-set_property -name "board_part" -value "xilinx.com:zc706:part0:1.2" -objects $obj
-set_property -name "compxlib.activehdl_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/activehdl" -objects $obj
-set_property -name "compxlib.funcsim" -value "1" -objects $obj
-set_property -name "compxlib.ies_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/ies" -objects $obj
-set_property -name "compxlib.modelsim_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/modelsim" -objects $obj
-set_property -name "compxlib.overwrite_libs" -value "0" -objects $obj
-set_property -name "compxlib.questa_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/questa" -objects $obj
-set_property -name "compxlib.riviera_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/riviera" -objects $obj
-set_property -name "compxlib.timesim" -value "1" -objects $obj
-set_property -name "compxlib.vcs_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/vcs" -objects $obj
-set_property -name "compxlib.xsim_compiled_library_dir" -value "" -objects $obj
-set_property -name "corecontainer.enable" -value "0" -objects $obj
-set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
-set_property -name "dsa.num_compute_units" -value "60" -objects $obj
-set_property -name "dsa.rom.debug_type" -value "0" -objects $obj
-set_property -name "dsa.rom.prom_type" -value "0" -objects $obj
-set_property -name "enable_optional_runs_sta" -value "0" -objects $obj
-set_property -name "generate_ip_upgrade_log" -value "1" -objects $obj
-set_property -name "ip_cache_permissions" -value "read write" -objects $obj
-set_property -name "ip_interface_inference_priority" -value "" -objects $obj
-set_property -name "ip_output_repo" -value "$proj_dir/${project_name}.cache/ip" -objects $obj
-set_property -name "project_type" -value "Default" -objects $obj
-set_property -name "pr_flow" -value "0" -objects $obj
-set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
-set_property -name "sim.use_ip_compiled_libs" -value "1" -objects $obj
-set_property -name "simulator_language" -value "Mixed" -objects $obj
-set_property -name "source_mgmt_mode" -value "All" -objects $obj
-set_property -name "target_language" -value "Verilog" -objects $obj
-set_property -name "target_simulator" -value "XSim" -objects $obj
-set_property -name "xpm_libraries" -value "XPM_MEMORY" -objects $obj
-set_property -name "xsim.array_display_limit" -value "1024" -objects $obj
-set_property -name "xsim.radix" -value "hex" -objects $obj
-set_property -name "xsim.time_unit" -value "ns" -objects $obj
-set_property -name "xsim.trace_limit" -value "65536" -objects $obj
-
-# Create 'sources_1' fileset (if not found)
-if {[string equal [get_filesets -quiet sources_1] ""]} {
-  create_fileset -srcset sources_1
-}
-
-# Set IP repository paths
-set obj [get_filesets sources_1]
-set_property "ip_repo_paths" "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq"]" $obj
-
-# Rebuild user ip_repo's index before adding any source files
-update_ip_catalog -rebuild
-
-# Set 'sources_1' fileset object
-set obj [get_filesets sources_1]
-set files [list \
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/complex_multiplier/complex_multiplier.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/atan_lut/atan_lut.xci"]"\
- "[file normalize "$origin_dir/verilog/bits_to_bytes.v"]"\
- "[file normalize "$origin_dir/verilog/calc_mean.v"]"\
- "[file normalize "$origin_dir/verilog/complex_mult.v"]"\
- "[file normalize "$origin_dir/verilog/complex_to_mag.v"]"\
- "[file normalize "$origin_dir/verilog/complex_to_mag_sq.v"]"\
- "[file normalize "$origin_dir/verilog/crc32.v"]"\
- "[file normalize "$origin_dir/verilog/deinterleave.v"]"\
- "[file normalize "$origin_dir/verilog/delayT.v"]"\
- "[file normalize "$origin_dir/verilog/delay_sample.v"]"\
- "[file normalize "$origin_dir/verilog/common_defs.v"]"\
- "[file normalize "$origin_dir/verilog/demodulate.v"]"\
- "[file normalize "$origin_dir/verilog/descramble.v"]"\
- "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq/src/div_gen.v"]"\
- "[file normalize "$origin_dir/verilog/divider.v"]"\
- "[file normalize "$origin_dir/verilog/dot11.v"]"\
- "[file normalize "$origin_dir/verilog/equalizer.v"]"\
- "[file normalize "$origin_dir/verilog/ht_sig_crc.v"]"\
- "[file normalize "$origin_dir/verilog/moving_avg.v"]"\
- "[file normalize "$origin_dir/verilog/ofdm_decoder.v"]"\
- "[file normalize "$origin_dir/verilog/openofdm_rx_s_axi.v"]"\
- "[file normalize "$origin_dir/verilog/phase.v"]"\
- "[file normalize "$origin_dir/verilog/usrp2/ram_2port.v"]"\
- "[file normalize "$origin_dir/verilog/rotate.v"]"\
- "[file normalize "$origin_dir/verilog/stage_mult.v"]"\
- "[file normalize "$origin_dir/verilog/sync_long.v"]"\
- "[file normalize "$origin_dir/verilog/sync_short.v"]"\
- "[file normalize "$origin_dir/verilog/openofdm_rx.v"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/deinter_lut/deinter_lut.coe"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/atan_lut/atan_lut.coe"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/rot_lut/rot_lut.coe"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/viterbi/viterbi_v7_0.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/deinter_lut/deinter_lut.xci"]"\
- "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq/src/div_gen_div_gen_0_0/div_gen_div_gen_0_0.xci"]"\
- "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq/src/div_gen_xlslice_0_0/div_gen_xlslice_0_0.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/xfft/xfft_v9.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynq/rot_lut/rot_lut.xci"]"\
-]
-# If you want to make a copy of the file to new src folder, use following command
-# set imported_files [import_files -fileset sources_1 $files]
-# If you want to keep the files remote, use the following command
-# set added_files [add_files -fileset sources_1 $files]
-add_files -norecurse -fileset $obj $files
-
-# #Set 'sources_1' fileset file properties for remote files
-#set file "$origin_dir/verilog/coregen/div_gen_v3_0.ngc"
-#set file [file normalize $file]
-#set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
-#set_property -name "file_type" -value "NGC" -objects $file_obj
-
-set file "openofdm_rx_s_axi.v"
-set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
-set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
-set_property -name "used_in_implementation" -value "0" -objects $file_obj
-
-set file "openofdm_rx.v"
-set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
-set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
-set_property -name "used_in_implementation" -value "0" -objects $file_obj
-
-
-# Set 'sources_1' fileset file properties for local files
-
-# Set 'sources_1' fileset properties
-set obj [get_filesets sources_1]
-set_property -name "top" -value "openofdm_rx" -objects $obj
-
-# Create 'constrs_1' fileset (if not found)
-if {[string equal [get_filesets -quiet constrs_1] ""]} {
-  create_fileset -constrset constrs_1
-}
-
-# Set 'constrs_1' fileset object
-set obj [get_filesets constrs_1]
-
-# Empty (no sources present)
-
-
-# Create constraints ! 
-# Set 'constrs_1' fileset properties
-set obj [get_filesets constrs_1]
-
-# Create runs 
-# Create 'sim_1' fileset (if not found)
-if {[string equal [get_filesets -quiet sim_1] ""]} {
-  create_fileset -simset sim_1
-}
-
-# Set 'sim_1' fileset object
-set obj [get_filesets sim_1]
-set files [list \
- "[file normalize "$origin_dir/verilog/dot11_tb.v"]"
-]
-add_files -norecurse -fileset $obj $files
-# Empty (no sources present)
-
-# Set 'sim_1' fileset properties
-set obj [get_filesets sim_1]
-set_property -name "32bit" -value "0" -objects $obj
-set_property -name "generic" -value "" -objects $obj
-set_property -name "include_dirs" -value "" -objects $obj
-set_property -name "incremental" -value "1" -objects $obj
-set_property -name "name" -value "sim_1" -objects $obj
-set_property -name "nl.cell" -value "" -objects $obj
-set_property -name "nl.incl_unisim_models" -value "0" -objects $obj
-set_property -name "nl.process_corner" -value "slow" -objects $obj
-set_property -name "nl.rename_top" -value "" -objects $obj
-set_property -name "nl.sdf_anno" -value "1" -objects $obj
-set_property -name "nl.write_all_overrides" -value "0" -objects $obj
-set_property -name "source_set" -value "sources_1" -objects $obj
-set_property -name "top" -value "dot11_tb" -objects $obj
-set_property -name "transport_int_delay" -value "0" -objects $obj
-set_property -name "transport_path_delay" -value "0" -objects $obj
-set_property -name "verilog_define" -value "" -objects $obj
-set_property -name "verilog_uppercase" -value "0" -objects $obj
-set_property -name "xelab.dll" -value "0" -objects $obj
-set_property -name "xsim.compile.tcl.pre" -value "" -objects $obj
-set_property -name "xsim.compile.xvhdl.more_options" -value "" -objects $obj
-set_property -name "xsim.compile.xvhdl.nosort" -value "1" -objects $obj
-set_property -name "xsim.compile.xvhdl.relax" -value "1" -objects $obj
-set_property -name "xsim.compile.xvlog.more_options" -value "" -objects $obj
-set_property -name "xsim.compile.xvlog.nosort" -value "1" -objects $obj
-set_property -name "xsim.compile.xvlog.relax" -value "1" -objects $obj
-set_property -name "xsim.elaborate.debug_level" -value "typical" -objects $obj
-set_property -name "xsim.elaborate.load_glbl" -value "1" -objects $obj
-set_property -name "xsim.elaborate.mt_level" -value "auto" -objects $obj
-set_property -name "xsim.elaborate.rangecheck" -value "0" -objects $obj
-set_property -name "xsim.elaborate.relax" -value "1" -objects $obj
-set_property -name "xsim.elaborate.sdf_delay" -value "sdfmax" -objects $obj
-set_property -name "xsim.elaborate.snapshot" -value "" -objects $obj
-set_property -name "xsim.elaborate.xelab.more_options" -value "" -objects $obj
-set_property -name "xsim.simulate.custom_tcl" -value "" -objects $obj
-set_property -name "xsim.simulate.log_all_signals" -value "0" -objects $obj
-set_property -name "xsim.simulate.runtime" -value "1000ns" -objects $obj
-set_property -name "xsim.simulate.saif" -value "" -objects $obj
-set_property -name "xsim.simulate.saif_all_signals" -value "0" -objects $obj
-set_property -name "xsim.simulate.saif_scope" -value "" -objects $obj
-set_property -name "xsim.simulate.tcl.post" -value "" -objects $obj
-set_property -name "xsim.simulate.wdb" -value "" -objects $obj
-set_property -name "xsim.simulate.xsim.more_options" -value "" -objects $obj
-
-# Create 'synth_1' run (if not found)
-if {[string equal [get_runs -quiet synth_1] ""]} {
-    create_run -name synth_1 -part xc7z045ffg900-2 -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
-} else {
-  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
-  set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
-}
-set obj [get_runs synth_1]
-set_property set_report_strategy_name 1 $obj
-set_property report_strategy {Vivado Synthesis Default Reports} $obj
-set_property set_report_strategy_name 0 $obj
-# Create 'synth_1_synth_report_utilization_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
-  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
-}
-set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.pblocks" -value "" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.slr" -value "0" -objects $obj
-set_property -name "options.packthru" -value "0" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-set obj [get_runs synth_1]
-set_property -name "constrset" -value "constrs_1" -objects $obj
-set_property -name "description" -value "Vivado Synthesis Defaults" -objects $obj
-set_property -name "flow" -value "Vivado Synthesis 2018" -objects $obj
-set_property -name "name" -value "synth_1" -objects $obj
-set_property -name "needs_refresh" -value "0" -objects $obj
-set_property -name "srcset" -value "sources_1" -objects $obj
-# set_property -name "incremental_checkpoint" -value "" -objects $obj
-set_property -name "include_in_archive" -value "1" -objects $obj
-set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
-set_property -name "steps.synth_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.synth_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.synth_design.args.flatten_hierarchy" -value "rebuilt" -objects $obj
-set_property -name "steps.synth_design.args.gated_clock_conversion" -value "off" -objects $obj
-set_property -name "steps.synth_design.args.bufg" -value "12" -objects $obj
-set_property -name "steps.synth_design.args.fanout_limit" -value "10000" -objects $obj
-set_property -name "steps.synth_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.synth_design.args.retiming" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.fsm_extraction" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.keep_equivalent_registers" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.resource_sharing" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.control_set_opt_threshold" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.no_lc" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.no_srlextract" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.shreg_min_size" -value "3" -objects $obj
-set_property -name "steps.synth_design.args.max_bram" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_uram" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_dsp" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_bram_cascade_height" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_uram_cascade_height" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.cascade_dsp" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.assert" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.more options" -value "" -objects $obj
-
-# set the current synth run
-current_run -synthesis [get_runs synth_1]
-
-# Create 'impl_1' run (if not found)
-if {[string equal [get_runs -quiet impl_1] ""]} {
-    create_run -name impl_1 -part xc7z045ffg900-2 -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
-} else {
-  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
-  set_property flow "Vivado Implementation 2018" [get_runs impl_1]
-}
-set obj [get_runs impl_1]
-set_property set_report_strategy_name 1 $obj
-set_property report_strategy {Vivado Implementation Default Reports} $obj
-set_property set_report_strategy_name 0 $obj
-# Create 'impl_1_init_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_opt_report_drc_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
-  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.upgrade_cw" -value "0" -objects $obj
-set_property -name "options.checks" -value "" -objects $obj
-set_property -name "options.ruledecks" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_io_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_utilization_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.pblocks" -value "" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.slr" -value "0" -objects $obj
-set_property -name "options.packthru" -value "0" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_control_sets_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.verbose" -value "1" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
-  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_drc_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.upgrade_cw" -value "0" -objects $obj
-set_property -name "options.checks" -value "" -objects $obj
-set_property -name "options.ruledecks" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_methodology_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.checks" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_power_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.advisory" -value "0" -objects $obj
-set_property -name "options.xpe" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_route_status_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.of_objects" -value "" -objects $obj
-set_property -name "options.route_type" -value "" -objects $obj
-set_property -name "options.list_all_nets" -value "0" -objects $obj
-set_property -name "options.show_all" -value "0" -objects $obj
-set_property -name "options.has_routing" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.write_xdc" -value "0" -objects $obj
-set_property -name "options.clock_roots_only" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "1" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-set obj [get_runs impl_1]
-set_property -name "constrset" -value "constrs_1" -objects $obj
-set_property -name "description" -value "Default settings for Implementation." -objects $obj
-set_property -name "flow" -value "Vivado Implementation 2018" -objects $obj
-set_property -name "name" -value "impl_1" -objects $obj
-set_property -name "needs_refresh" -value "0" -objects $obj
-set_property -name "pr_configuration" -value "" -objects $obj
-set_property -name "srcset" -value "sources_1" -objects $obj
-# set_property -name "incremental_checkpoint" -value "" -objects $obj
-set_property -name "include_in_archive" -value "1" -objects $obj
-set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
-set_property -name "steps.opt_design.is_enabled" -value "1" -objects $obj
-set_property -name "steps.opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.opt_design.args.verbose" -value "0" -objects $obj
-set_property -name "steps.opt_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.power_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.power_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.power_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.power_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.place_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.place_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.place_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.place_design.args.more options" -value "" -objects $obj
-set_property -name "steps.post_place_power_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.post_place_power_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.post_place_power_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.post_place_power_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.phys_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.phys_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.phys_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.phys_opt_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.phys_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.route_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.route_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.route_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.route_design.args.more options" -value "" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.write_bitstream.tcl.pre" -value "" -objects $obj
-set_property -name "steps.write_bitstream.tcl.post" -value "" -objects $obj
-set_property -name "steps.write_bitstream.args.raw_bitfile" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.mask_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.no_binary_bitfile" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.bin_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.logic_location_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.more options" -value "" -objects $obj
-
-# set the current impl run
-current_run -implementation [get_runs impl_1]
-
-puts "INFO: Project created:$project_name"
+#*****************************************************************************************
+# 
+# By xianjun.jiao@imec.be; wei.liu@imec.be
+# 
+# Generated by Vivado on Mon Jan 21 11:32:41 +0100 2019
+# IP Build 2095745 on Tue Jan 30 17:13:15 MST 2018
+#
+# This file contains the Vivado Tcl commands for re-creating the project to the state*
+# when this script was generated. In order to re-create the project, please source this
+# file in the Vivado Tcl Shell.
+#
+# * Note that the runs in the created project will be configured the same way as the
+#   original project, however they will not be launched automatically. To regenerate the
+#   run results please launch the synthesis/implementation runs as needed.
+#
+#
+#*****************************************************************************************
+
+# -----------generate openofdm_rx_git_rev.v---------------
+set  fd  [open  "./verilog/openofdm_rx_git_rev.v"  w]
+set HASHCODE [exec ./get_git_rev.sh]
+puts $fd "`define OPENOFDM_RX_GIT_REV (32'h$HASHCODE)"
+close $fd
+# ----end of generate openofdm_rx_git_rev.v---------------
+
+# Set the reference directory for source file relative paths (by default the value is script directory path)
+set origin_dir [file dirname [info script]]
+
+# Use origin directory path location variable, if specified in the tcl shell
+if { [info exists ::origin_dir_loc] } {
+  set origin_dir $::origin_dir_loc
+}
+
+# Set the project name
+set project_name "openofdm_rx"
+exec rm -rf $project_name
+
+# Use project name variable, if specified in the tcl shell
+if { [info exists ::user_project_name] } {
+  set project_name $::user_project_name
+}
+
+variable script_file
+set script_file "openofdm_rx.tcl"
+
+# Help information for this script
+proc help {} {
+  variable script_file
+  puts "\nDescription:"
+  puts "Recreate a Vivado project from this script. The created project will be"
+  puts "functionally equivalent to the original project for which this script was"
+  puts "generated. The script contains commands for creating a project, filesets,"
+  puts "runs, adding/importing sources and setting properties on various objects.\n"
+  puts "Syntax:"
+  puts "$script_file"
+  puts "$script_file -tclargs \[--origin_dir <path>\]"
+  puts "$script_file -tclargs \[--project_name <name>\]"
+  puts "$script_file -tclargs \[--help\]\n"
+  puts "Usage:"
+  puts "Name                   Description"
+  puts "-------------------------------------------------------------------------"
+  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
+  puts "                       origin_dir path value is \".\", otherwise, the value"
+  puts "                       that was set with the \"-paths_relative_to\" switch"
+  puts "                       when this script was generated.\n"
+  puts "\[--project_name <name>\] Create project with the specified name. Default"
+  puts "                       name is the name of the project from where this"
+  puts "                       script was generated.\n"
+  puts "\[--help\]               Print help information for this script"
+  puts "-------------------------------------------------------------------------\n"
+  exit 0
+}
+
+if { $::argc > 0 } {
+  for {set i 0} {$i < [llength $::argc]} {incr i} {
+    set option [string trim [lindex $::argv $i]]
+    switch -regexp -- $option {
+      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
+      "--project_name" { incr i; set project_name [lindex $::argv $i] }
+      "--help"         { help }
+      default {
+        if { [regexp {^-} $option] } {
+          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
+          return 1
+        }
+      }
+    }
+  }
+}
+
+# Set the directory path for the original project from where this script was exported
+set src_dir "[file normalize "$origin_dir/verilog"]"
+
+# Create project
+create_project ${project_name} ./${project_name} -part xc7z045ffg900-2
+
+# Set the directory path for the new project
+set proj_dir [get_property directory [current_project]]
+
+# Reconstruct message rules
+# None
+
+# Set project properties
+set obj [current_project]
+set_property -name "board_connections" -value "" -objects $obj
+set_property -name "board_part" -value "xilinx.com:zc706:part0:1.2" -objects $obj
+set_property -name "compxlib.activehdl_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/activehdl" -objects $obj
+set_property -name "compxlib.funcsim" -value "1" -objects $obj
+set_property -name "compxlib.ies_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/ies" -objects $obj
+set_property -name "compxlib.modelsim_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/modelsim" -objects $obj
+set_property -name "compxlib.overwrite_libs" -value "0" -objects $obj
+set_property -name "compxlib.questa_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/questa" -objects $obj
+set_property -name "compxlib.riviera_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/riviera" -objects $obj
+set_property -name "compxlib.timesim" -value "1" -objects $obj
+set_property -name "compxlib.vcs_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/vcs" -objects $obj
+set_property -name "compxlib.xsim_compiled_library_dir" -value "" -objects $obj
+set_property -name "corecontainer.enable" -value "0" -objects $obj
+set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
+set_property -name "dsa.num_compute_units" -value "60" -objects $obj
+set_property -name "dsa.rom.debug_type" -value "0" -objects $obj
+set_property -name "dsa.rom.prom_type" -value "0" -objects $obj
+set_property -name "enable_optional_runs_sta" -value "0" -objects $obj
+set_property -name "generate_ip_upgrade_log" -value "1" -objects $obj
+set_property -name "ip_cache_permissions" -value "read write" -objects $obj
+set_property -name "ip_interface_inference_priority" -value "" -objects $obj
+set_property -name "ip_output_repo" -value "$proj_dir/${project_name}.cache/ip" -objects $obj
+set_property -name "project_type" -value "Default" -objects $obj
+set_property -name "pr_flow" -value "0" -objects $obj
+set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
+set_property -name "sim.use_ip_compiled_libs" -value "1" -objects $obj
+set_property -name "simulator_language" -value "Mixed" -objects $obj
+set_property -name "source_mgmt_mode" -value "All" -objects $obj
+set_property -name "target_language" -value "Verilog" -objects $obj
+set_property -name "target_simulator" -value "XSim" -objects $obj
+set_property -name "xpm_libraries" -value "XPM_MEMORY" -objects $obj
+set_property -name "xsim.array_display_limit" -value "1024" -objects $obj
+set_property -name "xsim.radix" -value "hex" -objects $obj
+set_property -name "xsim.time_unit" -value "ns" -objects $obj
+set_property -name "xsim.trace_limit" -value "65536" -objects $obj
+
+# Create 'sources_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sources_1] ""]} {
+  create_fileset -srcset sources_1
+}
+
+# Set IP repository paths
+set obj [get_filesets sources_1]
+set_property "ip_repo_paths" "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq"]" $obj
+
+# Rebuild user ip_repo's index before adding any source files
+update_ip_catalog -rebuild
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+set files [list \
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/complex_multiplier/complex_multiplier.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/atan_lut/atan_lut.xci"]"\
+ "[file normalize "$origin_dir/verilog/bits_to_bytes.v"]"\
+ "[file normalize "$origin_dir/verilog/calc_mean.v"]"\
+ "[file normalize "$origin_dir/verilog/complex_mult.v"]"\
+ "[file normalize "$origin_dir/verilog/complex_to_mag.v"]"\
+ "[file normalize "$origin_dir/verilog/complex_to_mag_sq.v"]"\
+ "[file normalize "$origin_dir/verilog/crc32.v"]"\
+ "[file normalize "$origin_dir/verilog/deinterleave.v"]"\
+ "[file normalize "$origin_dir/verilog/delayT.v"]"\
+ "[file normalize "$origin_dir/verilog/delay_sample.v"]"\
+ "[file normalize "$origin_dir/verilog/common_defs.v"]"\
+ "[file normalize "$origin_dir/verilog/demodulate.v"]"\
+ "[file normalize "$origin_dir/verilog/descramble.v"]"\
+ "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq/src/div_gen.v"]"\
+ "[file normalize "$origin_dir/verilog/divider.v"]"\
+ "[file normalize "$origin_dir/verilog/dot11.v"]"\
+ "[file normalize "$origin_dir/verilog/equalizer.v"]"\
+ "[file normalize "$origin_dir/verilog/ht_sig_crc.v"]"\
+ "[file normalize "$origin_dir/verilog/moving_avg.v"]"\
+ "[file normalize "$origin_dir/verilog/ofdm_decoder.v"]"\
+ "[file normalize "$origin_dir/verilog/openofdm_rx_s_axi.v"]"\
+ "[file normalize "$origin_dir/verilog/phase.v"]"\
+ "[file normalize "$origin_dir/verilog/usrp2/ram_2port.v"]"\
+ "[file normalize "$origin_dir/verilog/rotate.v"]"\
+ "[file normalize "$origin_dir/verilog/stage_mult.v"]"\
+ "[file normalize "$origin_dir/verilog/sync_long.v"]"\
+ "[file normalize "$origin_dir/verilog/sync_short.v"]"\
+ "[file normalize "$origin_dir/verilog/openofdm_rx.v"]"\
+ "[file normalize "$origin_dir/verilog/running_sum_dual_ch.v"]"\
+ "[file normalize "$origin_dir/verilog/signal_watchdog.v"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/deinter_lut/deinter_lut.coe"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/atan_lut/atan_lut.coe"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/rot_lut/rot_lut.coe"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/viterbi/viterbi_v7_0.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/deinter_lut/deinter_lut.xci"]"\
+ "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq/src/div_gen_div_gen_0_0/div_gen_div_gen_0_0.xci"]"\
+ "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynq/src/div_gen_xlslice_0_0/div_gen_xlslice_0_0.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/xfft/xfft_v9.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynq/rot_lut/rot_lut.xci"]"\
+]
+# If you want to make a copy of the file to new src folder, use following command
+# set imported_files [import_files -fileset sources_1 $files]
+# If you want to keep the files remote, use the following command
+# set added_files [add_files -fileset sources_1 $files]
+add_files -norecurse -fileset $obj $files
+
+# #Set 'sources_1' fileset file properties for remote files
+#set file "$origin_dir/verilog/coregen/div_gen_v3_0.ngc"
+#set file [file normalize $file]
+#set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+#set_property -name "file_type" -value "NGC" -objects $file_obj
+
+set file "openofdm_rx_s_axi.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+set file "openofdm_rx.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+set file "running_sum_dual_ch.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+set file "signal_watchdog.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+# Set 'sources_1' fileset file properties for local files
+
+# Set 'sources_1' fileset properties
+set obj [get_filesets sources_1]
+set_property -name "top" -value "openofdm_rx" -objects $obj
+
+# Create 'constrs_1' fileset (if not found)
+if {[string equal [get_filesets -quiet constrs_1] ""]} {
+  create_fileset -constrset constrs_1
+}
+
+# Set 'constrs_1' fileset object
+set obj [get_filesets constrs_1]
+
+# Empty (no sources present)
+
+
+# Create constraints ! 
+# Set 'constrs_1' fileset properties
+set obj [get_filesets constrs_1]
+
+# Create runs 
+# Create 'sim_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sim_1] ""]} {
+  create_fileset -simset sim_1
+}
+
+# Set 'sim_1' fileset object
+set obj [get_filesets sim_1]
+set files [list \
+ "[file normalize "$origin_dir/verilog/dot11_tb.v"]"
+]
+add_files -norecurse -fileset $obj $files
+# Empty (no sources present)
+
+# Set 'sim_1' fileset properties
+set obj [get_filesets sim_1]
+set_property -name "32bit" -value "0" -objects $obj
+set_property -name "generic" -value "" -objects $obj
+set_property -name "include_dirs" -value "" -objects $obj
+set_property -name "incremental" -value "1" -objects $obj
+set_property -name "name" -value "sim_1" -objects $obj
+set_property -name "nl.cell" -value "" -objects $obj
+set_property -name "nl.incl_unisim_models" -value "0" -objects $obj
+set_property -name "nl.process_corner" -value "slow" -objects $obj
+set_property -name "nl.rename_top" -value "" -objects $obj
+set_property -name "nl.sdf_anno" -value "1" -objects $obj
+set_property -name "nl.write_all_overrides" -value "0" -objects $obj
+set_property -name "source_set" -value "sources_1" -objects $obj
+set_property -name "top" -value "dot11_tb" -objects $obj
+set_property -name "transport_int_delay" -value "0" -objects $obj
+set_property -name "transport_path_delay" -value "0" -objects $obj
+set_property -name "verilog_define" -value "" -objects $obj
+set_property -name "verilog_uppercase" -value "0" -objects $obj
+set_property -name "xelab.dll" -value "0" -objects $obj
+set_property -name "xsim.compile.tcl.pre" -value "" -objects $obj
+set_property -name "xsim.compile.xvhdl.more_options" -value "" -objects $obj
+set_property -name "xsim.compile.xvhdl.nosort" -value "1" -objects $obj
+set_property -name "xsim.compile.xvhdl.relax" -value "1" -objects $obj
+set_property -name "xsim.compile.xvlog.more_options" -value "" -objects $obj
+set_property -name "xsim.compile.xvlog.nosort" -value "1" -objects $obj
+set_property -name "xsim.compile.xvlog.relax" -value "1" -objects $obj
+set_property -name "xsim.elaborate.debug_level" -value "typical" -objects $obj
+set_property -name "xsim.elaborate.load_glbl" -value "1" -objects $obj
+set_property -name "xsim.elaborate.mt_level" -value "auto" -objects $obj
+set_property -name "xsim.elaborate.rangecheck" -value "0" -objects $obj
+set_property -name "xsim.elaborate.relax" -value "1" -objects $obj
+set_property -name "xsim.elaborate.sdf_delay" -value "sdfmax" -objects $obj
+set_property -name "xsim.elaborate.snapshot" -value "" -objects $obj
+set_property -name "xsim.elaborate.xelab.more_options" -value "" -objects $obj
+set_property -name "xsim.simulate.custom_tcl" -value "" -objects $obj
+set_property -name "xsim.simulate.log_all_signals" -value "0" -objects $obj
+set_property -name "xsim.simulate.runtime" -value "1000ns" -objects $obj
+set_property -name "xsim.simulate.saif" -value "" -objects $obj
+set_property -name "xsim.simulate.saif_all_signals" -value "0" -objects $obj
+set_property -name "xsim.simulate.saif_scope" -value "" -objects $obj
+set_property -name "xsim.simulate.tcl.post" -value "" -objects $obj
+set_property -name "xsim.simulate.wdb" -value "" -objects $obj
+set_property -name "xsim.simulate.xsim.more_options" -value "" -objects $obj
+
+# Create 'synth_1' run (if not found)
+if {[string equal [get_runs -quiet synth_1] ""]} {
+    create_run -name synth_1 -part xc7z045ffg900-2 -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
+} else {
+  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
+  set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
+}
+set obj [get_runs synth_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Synthesis Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'synth_1_synth_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
+  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
+}
+set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.pblocks" -value "" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.slr" -value "0" -objects $obj
+set_property -name "options.packthru" -value "0" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+set obj [get_runs synth_1]
+set_property -name "constrset" -value "constrs_1" -objects $obj
+set_property -name "description" -value "Vivado Synthesis Defaults" -objects $obj
+set_property -name "flow" -value "Vivado Synthesis 2018" -objects $obj
+set_property -name "name" -value "synth_1" -objects $obj
+set_property -name "needs_refresh" -value "0" -objects $obj
+set_property -name "srcset" -value "sources_1" -objects $obj
+# set_property -name "incremental_checkpoint" -value "" -objects $obj
+set_property -name "include_in_archive" -value "1" -objects $obj
+set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
+set_property -name "steps.synth_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.synth_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.synth_design.args.flatten_hierarchy" -value "rebuilt" -objects $obj
+set_property -name "steps.synth_design.args.gated_clock_conversion" -value "off" -objects $obj
+set_property -name "steps.synth_design.args.bufg" -value "12" -objects $obj
+set_property -name "steps.synth_design.args.fanout_limit" -value "10000" -objects $obj
+set_property -name "steps.synth_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.synth_design.args.retiming" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.fsm_extraction" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.keep_equivalent_registers" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.resource_sharing" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.control_set_opt_threshold" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.no_lc" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.no_srlextract" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.shreg_min_size" -value "3" -objects $obj
+set_property -name "steps.synth_design.args.max_bram" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_uram" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_dsp" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_bram_cascade_height" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_uram_cascade_height" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.cascade_dsp" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.assert" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.more options" -value "" -objects $obj
+
+# set the current synth run
+current_run -synthesis [get_runs synth_1]
+
+# Create 'impl_1' run (if not found)
+if {[string equal [get_runs -quiet impl_1] ""]} {
+    create_run -name impl_1 -part xc7z045ffg900-2 -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
+} else {
+  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
+  set_property flow "Vivado Implementation 2018" [get_runs impl_1]
+}
+set obj [get_runs impl_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Implementation Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'impl_1_init_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_opt_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.upgrade_cw" -value "0" -objects $obj
+set_property -name "options.checks" -value "" -objects $obj
+set_property -name "options.ruledecks" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_io_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.pblocks" -value "" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.slr" -value "0" -objects $obj
+set_property -name "options.packthru" -value "0" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_control_sets_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.verbose" -value "1" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.upgrade_cw" -value "0" -objects $obj
+set_property -name "options.checks" -value "" -objects $obj
+set_property -name "options.ruledecks" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_methodology_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.checks" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_power_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.advisory" -value "0" -objects $obj
+set_property -name "options.xpe" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_route_status_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.of_objects" -value "" -objects $obj
+set_property -name "options.route_type" -value "" -objects $obj
+set_property -name "options.list_all_nets" -value "0" -objects $obj
+set_property -name "options.show_all" -value "0" -objects $obj
+set_property -name "options.has_routing" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.write_xdc" -value "0" -objects $obj
+set_property -name "options.clock_roots_only" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "1" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+set obj [get_runs impl_1]
+set_property -name "constrset" -value "constrs_1" -objects $obj
+set_property -name "description" -value "Default settings for Implementation." -objects $obj
+set_property -name "flow" -value "Vivado Implementation 2018" -objects $obj
+set_property -name "name" -value "impl_1" -objects $obj
+set_property -name "needs_refresh" -value "0" -objects $obj
+set_property -name "pr_configuration" -value "" -objects $obj
+set_property -name "srcset" -value "sources_1" -objects $obj
+# set_property -name "incremental_checkpoint" -value "" -objects $obj
+set_property -name "include_in_archive" -value "1" -objects $obj
+set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
+set_property -name "steps.opt_design.is_enabled" -value "1" -objects $obj
+set_property -name "steps.opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.opt_design.args.verbose" -value "0" -objects $obj
+set_property -name "steps.opt_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.power_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.power_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.power_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.power_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.place_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.place_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.place_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.place_design.args.more options" -value "" -objects $obj
+set_property -name "steps.post_place_power_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.post_place_power_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.post_place_power_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.post_place_power_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.phys_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.phys_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.phys_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.phys_opt_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.phys_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.route_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.route_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.route_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.route_design.args.more options" -value "" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.write_bitstream.tcl.pre" -value "" -objects $obj
+set_property -name "steps.write_bitstream.tcl.post" -value "" -objects $obj
+set_property -name "steps.write_bitstream.args.raw_bitfile" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.mask_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.no_binary_bitfile" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.bin_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.logic_location_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.more options" -value "" -objects $obj
+
+# set the current impl run
+current_run -implementation [get_runs impl_1]
+
+puts "INFO: Project created:$project_name"
diff --git a/openofdm_rx_ultra_scale.tcl b/openofdm_rx_ultra_scale.tcl
index 8c69f7d..68d9761 100644
--- a/openofdm_rx_ultra_scale.tcl
+++ b/openofdm_rx_ultra_scale.tcl
@@ -1,766 +1,777 @@
-#*****************************************************************************************
-# 
-# By xianjun.jiao@imec.be; wei.liu@imec.be
-# 
-# This file contains the Vivado Tcl commands for re-creating the project to the state*
-# when this script was generated. In order to re-create the project, please source this
-# file in the Vivado Tcl Shell.
-#
-# * Note that the runs in the created project will be configured the same way as the
-#   original project, however they will not be launched automatically. To regenerate the
-#   run results please launch the synthesis/implementation runs as needed.
-#
-#
-#*****************************************************************************************
-
-# -----------generate openofdm_rx_git_rev.v---------------
-set  fd  [open  "./verilog/openofdm_rx_git_rev.v"  w]
-set HASHCODE [exec ./get_git_rev.sh]
-puts $fd "`define OPENOFDM_RX_GIT_REV (32'h$HASHCODE)"
-close $fd
-# ----end of generate openofdm_rx_git_rev.v---------------
-
-# Set the reference directory for source file relative paths (by default the value is script directory path)
-set origin_dir [file dirname [info script]]
-
-# Use origin directory path location variable, if specified in the tcl shell
-if { [info exists ::origin_dir_loc] } {
-  set origin_dir $::origin_dir_loc
-}
-
-# Set the project name
-set project_name "openofdm_rx_ultra_scale"
-exec rm -rf $project_name
-
-# Use project name variable, if specified in the tcl shell
-if { [info exists ::user_project_name] } {
-  set project_name $::user_project_name
-}
-
-variable script_file
-set script_file "openofdm_rx_ultra_scale.tcl"
-
-# Help information for this script
-proc help {} {
-  variable script_file
-  puts "\nDescription:"
-  puts "Recreate a Vivado project from this script. The created project will be"
-  puts "functionally equivalent to the original project for which this script was"
-  puts "generated. The script contains commands for creating a project, filesets,"
-  puts "runs, adding/importing sources and setting properties on various objects.\n"
-  puts "Syntax:"
-  puts "$script_file"
-  puts "$script_file -tclargs \[--origin_dir <path>\]"
-  puts "$script_file -tclargs \[--project_name <name>\]"
-  puts "$script_file -tclargs \[--help\]\n"
-  puts "Usage:"
-  puts "Name                   Description"
-  puts "-------------------------------------------------------------------------"
-  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
-  puts "                       origin_dir path value is \".\", otherwise, the value"
-  puts "                       that was set with the \"-paths_relative_to\" switch"
-  puts "                       when this script was generated.\n"
-  puts "\[--project_name <name>\] Create project with the specified name. Default"
-  puts "                       name is the name of the project from where this"
-  puts "                       script was generated.\n"
-  puts "\[--help\]               Print help information for this script"
-  puts "-------------------------------------------------------------------------\n"
-  exit 0
-}
-
-if { $::argc > 0 } {
-  for {set i 0} {$i < [llength $::argc]} {incr i} {
-    set option [string trim [lindex $::argv $i]]
-    switch -regexp -- $option {
-      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
-      "--project_name" { incr i; set project_name [lindex $::argv $i] }
-      "--help"         { help }
-      default {
-        if { [regexp {^-} $option] } {
-          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
-          return 1
-        }
-      }
-    }
-  }
-}
-
-# Set the directory path for the original project from where this script was exported
-set src_dir "[file normalize "$origin_dir/verilog"]"
-
-# Create project
-create_project ${project_name} ./${project_name} -part xczu9eg-ffvb1156-2-e
-
-# Set the directory path for the new project
-set proj_dir [get_property directory [current_project]]
-
-# Reconstruct message rules
-# None
-
-# Set project properties
-set obj [current_project]
-set_property -name "board_connections" -value "" -objects $obj
-set_property -name "board_part" -value "xilinx.com:zcu102:part0:3.1" -objects $obj
-set_property -name "compxlib.activehdl_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/activehdl" -objects $obj
-set_property -name "compxlib.funcsim" -value "1" -objects $obj
-set_property -name "compxlib.ies_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/ies" -objects $obj
-set_property -name "compxlib.modelsim_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/modelsim" -objects $obj
-set_property -name "compxlib.overwrite_libs" -value "0" -objects $obj
-set_property -name "compxlib.questa_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/questa" -objects $obj
-set_property -name "compxlib.riviera_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/riviera" -objects $obj
-set_property -name "compxlib.timesim" -value "1" -objects $obj
-set_property -name "compxlib.vcs_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/vcs" -objects $obj
-set_property -name "compxlib.xsim_compiled_library_dir" -value "" -objects $obj
-set_property -name "corecontainer.enable" -value "0" -objects $obj
-set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
-set_property -name "dsa.num_compute_units" -value "60" -objects $obj
-set_property -name "dsa.rom.debug_type" -value "0" -objects $obj
-set_property -name "dsa.rom.prom_type" -value "0" -objects $obj
-set_property -name "enable_optional_runs_sta" -value "0" -objects $obj
-set_property -name "generate_ip_upgrade_log" -value "1" -objects $obj
-set_property -name "ip_cache_permissions" -value "read write" -objects $obj
-set_property -name "ip_interface_inference_priority" -value "" -objects $obj
-set_property -name "ip_output_repo" -value "$proj_dir/${project_name}.cache/ip" -objects $obj
-set_property -name "project_type" -value "Default" -objects $obj
-set_property -name "pr_flow" -value "0" -objects $obj
-set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
-set_property -name "sim.use_ip_compiled_libs" -value "1" -objects $obj
-set_property -name "simulator_language" -value "Mixed" -objects $obj
-set_property -name "source_mgmt_mode" -value "All" -objects $obj
-set_property -name "target_language" -value "Verilog" -objects $obj
-set_property -name "target_simulator" -value "XSim" -objects $obj
-set_property -name "xpm_libraries" -value "XPM_MEMORY" -objects $obj
-set_property -name "xsim.array_display_limit" -value "1024" -objects $obj
-set_property -name "xsim.radix" -value "hex" -objects $obj
-set_property -name "xsim.time_unit" -value "ns" -objects $obj
-set_property -name "xsim.trace_limit" -value "65536" -objects $obj
-
-# Create 'sources_1' fileset (if not found)
-if {[string equal [get_filesets -quiet sources_1] ""]} {
-  create_fileset -srcset sources_1
-}
-
-# Set IP repository paths
-set obj [get_filesets sources_1]
-set_property "ip_repo_paths" "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus"]" $obj
-
-# Rebuild user ip_repo's index before adding any source files
-update_ip_catalog -rebuild
-
-# Set 'sources_1' fileset object
-set obj [get_filesets sources_1]
-set files [list \
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/complex_multiplier/complex_multiplier.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/atan_lut/atan_lut.xci"]"\
- "[file normalize "$origin_dir/verilog/bits_to_bytes.v"]"\
- "[file normalize "$origin_dir/verilog/calc_mean.v"]"\
- "[file normalize "$origin_dir/verilog/complex_mult.v"]"\
- "[file normalize "$origin_dir/verilog/complex_to_mag.v"]"\
- "[file normalize "$origin_dir/verilog/complex_to_mag_sq.v"]"\
- "[file normalize "$origin_dir/verilog/crc32.v"]"\
- "[file normalize "$origin_dir/verilog/deinterleave.v"]"\
- "[file normalize "$origin_dir/verilog/delayT.v"]"\
- "[file normalize "$origin_dir/verilog/delay_sample.v"]"\
- "[file normalize "$origin_dir/verilog/common_defs.v"]"\
- "[file normalize "$origin_dir/verilog/demodulate.v"]"\
- "[file normalize "$origin_dir/verilog/descramble.v"]"\
- "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus/src/div_gen.v"]"\
- "[file normalize "$origin_dir/verilog/divider.v"]"\
- "[file normalize "$origin_dir/verilog/dot11.v"]"\
- "[file normalize "$origin_dir/verilog/equalizer.v"]"\
- "[file normalize "$origin_dir/verilog/ht_sig_crc.v"]"\
- "[file normalize "$origin_dir/verilog/moving_avg.v"]"\
- "[file normalize "$origin_dir/verilog/ofdm_decoder.v"]"\
- "[file normalize "$origin_dir/verilog/openofdm_rx_s_axi.v"]"\
- "[file normalize "$origin_dir/verilog/phase.v"]"\
- "[file normalize "$origin_dir/verilog/usrp2/ram_2port.v"]"\
- "[file normalize "$origin_dir/verilog/rotate.v"]"\
- "[file normalize "$origin_dir/verilog/stage_mult.v"]"\
- "[file normalize "$origin_dir/verilog/sync_long.v"]"\
- "[file normalize "$origin_dir/verilog/sync_short.v"]"\
- "[file normalize "$origin_dir/verilog/openofdm_rx.v"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/deinter_lut/deinter_lut.coe"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/atan_lut/atan_lut.coe"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/rot_lut/rot_lut.coe"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/viterbi/viterbi_v7_0.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/deinter_lut/deinter_lut.xci"]"\
- "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus/src/div_gen_div_gen_0_0/div_gen_div_gen_0_0.xci"]"\
- "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus/src/div_gen_xlslice_0_0/div_gen_xlslice_0_0.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/xfft/xfft_v9.xci"]"\
- "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/rot_lut/rot_lut.xci"]"\
-]
-# If you want to make a copy of the file to new src folder, use following command
-# set imported_files [import_files -fileset sources_1 $files]
-# If you want to keep the files remote, use the following command
-# set added_files [add_files -fileset sources_1 $files]
-add_files -norecurse -fileset $obj $files
-
-# #Set 'sources_1' fileset file properties for remote files
-#set file "$origin_dir/verilog/coregen/div_gen_v3_0.ngc"
-#set file [file normalize $file]
-#set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
-#set_property -name "file_type" -value "NGC" -objects $file_obj
-
-set file "openofdm_rx_s_axi.v"
-set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
-set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
-set_property -name "used_in_implementation" -value "0" -objects $file_obj
-
-set file "openofdm_rx.v"
-set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
-set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
-set_property -name "used_in_implementation" -value "0" -objects $file_obj
-
-
-# Set 'sources_1' fileset file properties for local files
-
-# Set 'sources_1' fileset properties
-set obj [get_filesets sources_1]
-set_property -name "top" -value "openofdm_rx" -objects $obj
-
-# Create 'constrs_1' fileset (if not found)
-if {[string equal [get_filesets -quiet constrs_1] ""]} {
-  create_fileset -constrset constrs_1
-}
-
-# Set 'constrs_1' fileset object
-set obj [get_filesets constrs_1]
-
-# Empty (no sources present)
-
-
-# Create constraints ! 
-# Set 'constrs_1' fileset properties
-set obj [get_filesets constrs_1]
-
-# Create runs 
-# Create 'sim_1' fileset (if not found)
-if {[string equal [get_filesets -quiet sim_1] ""]} {
-  create_fileset -simset sim_1
-}
-
-# Set 'sim_1' fileset object
-set obj [get_filesets sim_1]
-set files [list \
- "[file normalize "$origin_dir/verilog/dot11_tb.v"]"
-]
-add_files -norecurse -fileset $obj $files
-# Empty (no sources present)
-
-# Set 'sim_1' fileset properties
-set obj [get_filesets sim_1]
-set_property -name "32bit" -value "0" -objects $obj
-set_property -name "generic" -value "" -objects $obj
-set_property -name "include_dirs" -value "" -objects $obj
-set_property -name "incremental" -value "1" -objects $obj
-set_property -name "name" -value "sim_1" -objects $obj
-set_property -name "nl.cell" -value "" -objects $obj
-set_property -name "nl.incl_unisim_models" -value "0" -objects $obj
-set_property -name "nl.process_corner" -value "slow" -objects $obj
-set_property -name "nl.rename_top" -value "" -objects $obj
-set_property -name "nl.sdf_anno" -value "1" -objects $obj
-set_property -name "nl.write_all_overrides" -value "0" -objects $obj
-set_property -name "source_set" -value "sources_1" -objects $obj
-set_property -name "top" -value "dot11_tb" -objects $obj
-set_property -name "transport_int_delay" -value "0" -objects $obj
-set_property -name "transport_path_delay" -value "0" -objects $obj
-set_property -name "verilog_define" -value "" -objects $obj
-set_property -name "verilog_uppercase" -value "0" -objects $obj
-set_property -name "xelab.dll" -value "0" -objects $obj
-set_property -name "xsim.compile.tcl.pre" -value "" -objects $obj
-set_property -name "xsim.compile.xvhdl.more_options" -value "" -objects $obj
-set_property -name "xsim.compile.xvhdl.nosort" -value "1" -objects $obj
-set_property -name "xsim.compile.xvhdl.relax" -value "1" -objects $obj
-set_property -name "xsim.compile.xvlog.more_options" -value "" -objects $obj
-set_property -name "xsim.compile.xvlog.nosort" -value "1" -objects $obj
-set_property -name "xsim.compile.xvlog.relax" -value "1" -objects $obj
-set_property -name "xsim.elaborate.debug_level" -value "typical" -objects $obj
-set_property -name "xsim.elaborate.load_glbl" -value "1" -objects $obj
-set_property -name "xsim.elaborate.mt_level" -value "auto" -objects $obj
-set_property -name "xsim.elaborate.rangecheck" -value "0" -objects $obj
-set_property -name "xsim.elaborate.relax" -value "1" -objects $obj
-set_property -name "xsim.elaborate.sdf_delay" -value "sdfmax" -objects $obj
-set_property -name "xsim.elaborate.snapshot" -value "" -objects $obj
-set_property -name "xsim.elaborate.xelab.more_options" -value "" -objects $obj
-set_property -name "xsim.simulate.custom_tcl" -value "" -objects $obj
-set_property -name "xsim.simulate.log_all_signals" -value "0" -objects $obj
-set_property -name "xsim.simulate.runtime" -value "1000ns" -objects $obj
-set_property -name "xsim.simulate.saif" -value "" -objects $obj
-set_property -name "xsim.simulate.saif_all_signals" -value "0" -objects $obj
-set_property -name "xsim.simulate.saif_scope" -value "" -objects $obj
-set_property -name "xsim.simulate.tcl.post" -value "" -objects $obj
-set_property -name "xsim.simulate.wdb" -value "" -objects $obj
-set_property -name "xsim.simulate.xsim.more_options" -value "" -objects $obj
-
-# Create 'synth_1' run (if not found)
-if {[string equal [get_runs -quiet synth_1] ""]} {
-    create_run -name synth_1 -part xczu9eg-ffvb1156-2-e -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
-} else {
-  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
-  set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
-}
-set obj [get_runs synth_1]
-set_property set_report_strategy_name 1 $obj
-set_property report_strategy {Vivado Synthesis Default Reports} $obj
-set_property set_report_strategy_name 0 $obj
-# Create 'synth_1_synth_report_utilization_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
-  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
-}
-set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.pblocks" -value "" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.slr" -value "0" -objects $obj
-set_property -name "options.packthru" -value "0" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-set obj [get_runs synth_1]
-set_property -name "constrset" -value "constrs_1" -objects $obj
-set_property -name "description" -value "Vivado Synthesis Defaults" -objects $obj
-set_property -name "flow" -value "Vivado Synthesis 2018" -objects $obj
-set_property -name "name" -value "synth_1" -objects $obj
-set_property -name "needs_refresh" -value "0" -objects $obj
-set_property -name "srcset" -value "sources_1" -objects $obj
-# set_property -name "incremental_checkpoint" -value "" -objects $obj
-set_property -name "include_in_archive" -value "1" -objects $obj
-set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
-set_property -name "steps.synth_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.synth_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.synth_design.args.flatten_hierarchy" -value "rebuilt" -objects $obj
-set_property -name "steps.synth_design.args.gated_clock_conversion" -value "off" -objects $obj
-set_property -name "steps.synth_design.args.bufg" -value "12" -objects $obj
-set_property -name "steps.synth_design.args.fanout_limit" -value "10000" -objects $obj
-set_property -name "steps.synth_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.synth_design.args.retiming" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.fsm_extraction" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.keep_equivalent_registers" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.resource_sharing" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.control_set_opt_threshold" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.no_lc" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.no_srlextract" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.shreg_min_size" -value "3" -objects $obj
-set_property -name "steps.synth_design.args.max_bram" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_uram" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_dsp" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_bram_cascade_height" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.max_uram_cascade_height" -value "-1" -objects $obj
-set_property -name "steps.synth_design.args.cascade_dsp" -value "auto" -objects $obj
-set_property -name "steps.synth_design.args.assert" -value "0" -objects $obj
-set_property -name "steps.synth_design.args.more options" -value "" -objects $obj
-
-# set the current synth run
-current_run -synthesis [get_runs synth_1]
-
-# Create 'impl_1' run (if not found)
-if {[string equal [get_runs -quiet impl_1] ""]} {
-    create_run -name impl_1 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
-} else {
-  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
-  set_property flow "Vivado Implementation 2018" [get_runs impl_1]
-}
-set obj [get_runs impl_1]
-set_property set_report_strategy_name 1 $obj
-set_property report_strategy {Vivado Implementation Default Reports} $obj
-set_property set_report_strategy_name 0 $obj
-# Create 'impl_1_init_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_opt_report_drc_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
-  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.upgrade_cw" -value "0" -objects $obj
-set_property -name "options.checks" -value "" -objects $obj
-set_property -name "options.ruledecks" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_io_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_utilization_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.pblocks" -value "" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.slr" -value "0" -objects $obj
-set_property -name "options.packthru" -value "0" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_control_sets_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.verbose" -value "1" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
-  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_place_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "0" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_drc_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.upgrade_cw" -value "0" -objects $obj
-set_property -name "options.checks" -value "" -objects $obj
-set_property -name "options.ruledecks" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_methodology_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.checks" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_power_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.advisory" -value "0" -objects $obj
-set_property -name "options.xpe" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_route_status_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.of_objects" -value "" -objects $obj
-set_property -name "options.route_type" -value "" -objects $obj
-set_property -name "options.list_all_nets" -value "0" -objects $obj
-set_property -name "options.show_all" -value "0" -objects $obj
-set_property -name "options.has_routing" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "0" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.cells" -value "" -objects $obj
-set_property -name "options.hierarchical" -value "0" -objects $obj
-set_property -name "options.hierarchical_depth" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
-  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.write_xdc" -value "0" -objects $obj
-set_property -name "options.clock_roots_only" -value "0" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
-if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
-  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
-}
-set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
-if { $obj != "" } {
-set_property -name "is_enabled" -value "1" -objects $obj
-set_property -name "options.check_timing_verbose" -value "0" -objects $obj
-set_property -name "options.delay_type" -value "" -objects $obj
-set_property -name "options.setup" -value "0" -objects $obj
-set_property -name "options.hold" -value "0" -objects $obj
-set_property -name "options.max_paths" -value "10" -objects $obj
-set_property -name "options.nworst" -value "" -objects $obj
-set_property -name "options.unique_pins" -value "0" -objects $obj
-set_property -name "options.path_type" -value "" -objects $obj
-set_property -name "options.slack_lesser_than" -value "" -objects $obj
-set_property -name "options.report_unconstrained" -value "0" -objects $obj
-set_property -name "options.warn_on_violation" -value "1" -objects $obj
-set_property -name "options.significant_digits" -value "" -objects $obj
-set_property -name "options.cell" -value "" -objects $obj
-set_property -name "options.more_options" -value "" -objects $obj
-
-}
-set obj [get_runs impl_1]
-set_property -name "constrset" -value "constrs_1" -objects $obj
-set_property -name "description" -value "Default settings for Implementation." -objects $obj
-set_property -name "flow" -value "Vivado Implementation 2018" -objects $obj
-set_property -name "name" -value "impl_1" -objects $obj
-set_property -name "needs_refresh" -value "0" -objects $obj
-set_property -name "pr_configuration" -value "" -objects $obj
-set_property -name "srcset" -value "sources_1" -objects $obj
-# set_property -name "incremental_checkpoint" -value "" -objects $obj
-set_property -name "include_in_archive" -value "1" -objects $obj
-set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
-set_property -name "steps.opt_design.is_enabled" -value "1" -objects $obj
-set_property -name "steps.opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.opt_design.args.verbose" -value "0" -objects $obj
-set_property -name "steps.opt_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.power_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.power_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.power_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.power_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.place_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.place_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.place_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.place_design.args.more options" -value "" -objects $obj
-set_property -name "steps.post_place_power_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.post_place_power_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.post_place_power_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.post_place_power_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.phys_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.phys_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.phys_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.phys_opt_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.phys_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.route_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.route_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.route_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.route_design.args.more options" -value "" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "0" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.tcl.pre" -value "" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.tcl.post" -value "" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Default" -objects $obj
-set_property -name "steps.post_route_phys_opt_design.args.more options" -value "" -objects $obj
-set_property -name "steps.write_bitstream.tcl.pre" -value "" -objects $obj
-set_property -name "steps.write_bitstream.tcl.post" -value "" -objects $obj
-set_property -name "steps.write_bitstream.args.raw_bitfile" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.mask_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.no_binary_bitfile" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.bin_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.logic_location_file" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
-set_property -name "steps.write_bitstream.args.more options" -value "" -objects $obj
-
-# set the current impl run
-current_run -implementation [get_runs impl_1]
-
-puts "INFO: Project created:$project_name"
+#*****************************************************************************************
+# 
+# By xianjun.jiao@imec.be; wei.liu@imec.be
+# 
+# This file contains the Vivado Tcl commands for re-creating the project to the state*
+# when this script was generated. In order to re-create the project, please source this
+# file in the Vivado Tcl Shell.
+#
+# * Note that the runs in the created project will be configured the same way as the
+#   original project, however they will not be launched automatically. To regenerate the
+#   run results please launch the synthesis/implementation runs as needed.
+#
+#
+#*****************************************************************************************
+
+# -----------generate openofdm_rx_git_rev.v---------------
+set  fd  [open  "./verilog/openofdm_rx_git_rev.v"  w]
+set HASHCODE [exec ./get_git_rev.sh]
+puts $fd "`define OPENOFDM_RX_GIT_REV (32'h$HASHCODE)"
+close $fd
+# ----end of generate openofdm_rx_git_rev.v---------------
+
+# Set the reference directory for source file relative paths (by default the value is script directory path)
+set origin_dir [file dirname [info script]]
+
+# Use origin directory path location variable, if specified in the tcl shell
+if { [info exists ::origin_dir_loc] } {
+  set origin_dir $::origin_dir_loc
+}
+
+# Set the project name
+set project_name "openofdm_rx_ultra_scale"
+exec rm -rf $project_name
+
+# Use project name variable, if specified in the tcl shell
+if { [info exists ::user_project_name] } {
+  set project_name $::user_project_name
+}
+
+variable script_file
+set script_file "openofdm_rx_ultra_scale.tcl"
+
+# Help information for this script
+proc help {} {
+  variable script_file
+  puts "\nDescription:"
+  puts "Recreate a Vivado project from this script. The created project will be"
+  puts "functionally equivalent to the original project for which this script was"
+  puts "generated. The script contains commands for creating a project, filesets,"
+  puts "runs, adding/importing sources and setting properties on various objects.\n"
+  puts "Syntax:"
+  puts "$script_file"
+  puts "$script_file -tclargs \[--origin_dir <path>\]"
+  puts "$script_file -tclargs \[--project_name <name>\]"
+  puts "$script_file -tclargs \[--help\]\n"
+  puts "Usage:"
+  puts "Name                   Description"
+  puts "-------------------------------------------------------------------------"
+  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
+  puts "                       origin_dir path value is \".\", otherwise, the value"
+  puts "                       that was set with the \"-paths_relative_to\" switch"
+  puts "                       when this script was generated.\n"
+  puts "\[--project_name <name>\] Create project with the specified name. Default"
+  puts "                       name is the name of the project from where this"
+  puts "                       script was generated.\n"
+  puts "\[--help\]               Print help information for this script"
+  puts "-------------------------------------------------------------------------\n"
+  exit 0
+}
+
+if { $::argc > 0 } {
+  for {set i 0} {$i < [llength $::argc]} {incr i} {
+    set option [string trim [lindex $::argv $i]]
+    switch -regexp -- $option {
+      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
+      "--project_name" { incr i; set project_name [lindex $::argv $i] }
+      "--help"         { help }
+      default {
+        if { [regexp {^-} $option] } {
+          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
+          return 1
+        }
+      }
+    }
+  }
+}
+
+# Set the directory path for the original project from where this script was exported
+set src_dir "[file normalize "$origin_dir/verilog"]"
+
+# Create project
+create_project ${project_name} ./${project_name} -part xczu9eg-ffvb1156-2-e
+
+# Set the directory path for the new project
+set proj_dir [get_property directory [current_project]]
+
+# Reconstruct message rules
+# None
+
+# Set project properties
+set obj [current_project]
+set_property -name "board_connections" -value "" -objects $obj
+set_property -name "board_part" -value "xilinx.com:zcu102:part0:3.1" -objects $obj
+set_property -name "compxlib.activehdl_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/activehdl" -objects $obj
+set_property -name "compxlib.funcsim" -value "1" -objects $obj
+set_property -name "compxlib.ies_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/ies" -objects $obj
+set_property -name "compxlib.modelsim_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/modelsim" -objects $obj
+set_property -name "compxlib.overwrite_libs" -value "0" -objects $obj
+set_property -name "compxlib.questa_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/questa" -objects $obj
+set_property -name "compxlib.riviera_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/riviera" -objects $obj
+set_property -name "compxlib.timesim" -value "1" -objects $obj
+set_property -name "compxlib.vcs_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/vcs" -objects $obj
+set_property -name "compxlib.xsim_compiled_library_dir" -value "" -objects $obj
+set_property -name "corecontainer.enable" -value "0" -objects $obj
+set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
+set_property -name "dsa.num_compute_units" -value "60" -objects $obj
+set_property -name "dsa.rom.debug_type" -value "0" -objects $obj
+set_property -name "dsa.rom.prom_type" -value "0" -objects $obj
+set_property -name "enable_optional_runs_sta" -value "0" -objects $obj
+set_property -name "generate_ip_upgrade_log" -value "1" -objects $obj
+set_property -name "ip_cache_permissions" -value "read write" -objects $obj
+set_property -name "ip_interface_inference_priority" -value "" -objects $obj
+set_property -name "ip_output_repo" -value "$proj_dir/${project_name}.cache/ip" -objects $obj
+set_property -name "project_type" -value "Default" -objects $obj
+set_property -name "pr_flow" -value "0" -objects $obj
+set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
+set_property -name "sim.use_ip_compiled_libs" -value "1" -objects $obj
+set_property -name "simulator_language" -value "Mixed" -objects $obj
+set_property -name "source_mgmt_mode" -value "All" -objects $obj
+set_property -name "target_language" -value "Verilog" -objects $obj
+set_property -name "target_simulator" -value "XSim" -objects $obj
+set_property -name "xpm_libraries" -value "XPM_MEMORY" -objects $obj
+set_property -name "xsim.array_display_limit" -value "1024" -objects $obj
+set_property -name "xsim.radix" -value "hex" -objects $obj
+set_property -name "xsim.time_unit" -value "ns" -objects $obj
+set_property -name "xsim.trace_limit" -value "65536" -objects $obj
+
+# Create 'sources_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sources_1] ""]} {
+  create_fileset -srcset sources_1
+}
+
+# Set IP repository paths
+set obj [get_filesets sources_1]
+set_property "ip_repo_paths" "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus"]" $obj
+
+# Rebuild user ip_repo's index before adding any source files
+update_ip_catalog -rebuild
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+set files [list \
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/complex_multiplier/complex_multiplier.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/atan_lut/atan_lut.xci"]"\
+ "[file normalize "$origin_dir/verilog/bits_to_bytes.v"]"\
+ "[file normalize "$origin_dir/verilog/calc_mean.v"]"\
+ "[file normalize "$origin_dir/verilog/complex_mult.v"]"\
+ "[file normalize "$origin_dir/verilog/complex_to_mag.v"]"\
+ "[file normalize "$origin_dir/verilog/complex_to_mag_sq.v"]"\
+ "[file normalize "$origin_dir/verilog/crc32.v"]"\
+ "[file normalize "$origin_dir/verilog/deinterleave.v"]"\
+ "[file normalize "$origin_dir/verilog/delayT.v"]"\
+ "[file normalize "$origin_dir/verilog/delay_sample.v"]"\
+ "[file normalize "$origin_dir/verilog/common_defs.v"]"\
+ "[file normalize "$origin_dir/verilog/demodulate.v"]"\
+ "[file normalize "$origin_dir/verilog/descramble.v"]"\
+ "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus/src/div_gen.v"]"\
+ "[file normalize "$origin_dir/verilog/divider.v"]"\
+ "[file normalize "$origin_dir/verilog/dot11.v"]"\
+ "[file normalize "$origin_dir/verilog/equalizer.v"]"\
+ "[file normalize "$origin_dir/verilog/ht_sig_crc.v"]"\
+ "[file normalize "$origin_dir/verilog/moving_avg.v"]"\
+ "[file normalize "$origin_dir/verilog/ofdm_decoder.v"]"\
+ "[file normalize "$origin_dir/verilog/openofdm_rx_s_axi.v"]"\
+ "[file normalize "$origin_dir/verilog/phase.v"]"\
+ "[file normalize "$origin_dir/verilog/usrp2/ram_2port.v"]"\
+ "[file normalize "$origin_dir/verilog/rotate.v"]"\
+ "[file normalize "$origin_dir/verilog/stage_mult.v"]"\
+ "[file normalize "$origin_dir/verilog/sync_long.v"]"\
+ "[file normalize "$origin_dir/verilog/sync_short.v"]"\
+ "[file normalize "$origin_dir/verilog/openofdm_rx.v"]"\
+ "[file normalize "$origin_dir/verilog/running_sum_dual_ch.v"]"\
+ "[file normalize "$origin_dir/verilog/signal_watchdog.v"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/deinter_lut/deinter_lut.coe"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/atan_lut/atan_lut.coe"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/rot_lut/rot_lut.coe"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/viterbi/viterbi_v7_0.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/deinter_lut/deinter_lut.xci"]"\
+ "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus/src/div_gen_div_gen_0_0/div_gen_div_gen_0_0.xci"]"\
+ "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_zynquplus/src/div_gen_xlslice_0_0/div_gen_xlslice_0_0.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/xfft/xfft_v9.xci"]"\
+ "[file normalize "$origin_dir/verilog/Xilinx/zynquplus/rot_lut/rot_lut.xci"]"\
+]
+# If you want to make a copy of the file to new src folder, use following command
+# set imported_files [import_files -fileset sources_1 $files]
+# If you want to keep the files remote, use the following command
+# set added_files [add_files -fileset sources_1 $files]
+add_files -norecurse -fileset $obj $files
+
+# #Set 'sources_1' fileset file properties for remote files
+#set file "$origin_dir/verilog/coregen/div_gen_v3_0.ngc"
+#set file [file normalize $file]
+#set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+#set_property -name "file_type" -value "NGC" -objects $file_obj
+
+set file "openofdm_rx_s_axi.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+set file "openofdm_rx.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+set file "running_sum_dual_ch.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+set file "signal_watchdog.v"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "used_in" -value "synthesis simulation" -objects $file_obj
+set_property -name "used_in_implementation" -value "0" -objects $file_obj
+
+# Set 'sources_1' fileset file properties for local files
+
+# Set 'sources_1' fileset properties
+set obj [get_filesets sources_1]
+set_property -name "top" -value "openofdm_rx" -objects $obj
+
+# Create 'constrs_1' fileset (if not found)
+if {[string equal [get_filesets -quiet constrs_1] ""]} {
+  create_fileset -constrset constrs_1
+}
+
+# Set 'constrs_1' fileset object
+set obj [get_filesets constrs_1]
+
+# Empty (no sources present)
+
+
+# Create constraints ! 
+# Set 'constrs_1' fileset properties
+set obj [get_filesets constrs_1]
+
+# Create runs 
+# Create 'sim_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sim_1] ""]} {
+  create_fileset -simset sim_1
+}
+
+# Set 'sim_1' fileset object
+set obj [get_filesets sim_1]
+set files [list \
+ "[file normalize "$origin_dir/verilog/dot11_tb.v"]"
+]
+add_files -norecurse -fileset $obj $files
+# Empty (no sources present)
+
+# Set 'sim_1' fileset properties
+set obj [get_filesets sim_1]
+set_property -name "32bit" -value "0" -objects $obj
+set_property -name "generic" -value "" -objects $obj
+set_property -name "include_dirs" -value "" -objects $obj
+set_property -name "incremental" -value "1" -objects $obj
+set_property -name "name" -value "sim_1" -objects $obj
+set_property -name "nl.cell" -value "" -objects $obj
+set_property -name "nl.incl_unisim_models" -value "0" -objects $obj
+set_property -name "nl.process_corner" -value "slow" -objects $obj
+set_property -name "nl.rename_top" -value "" -objects $obj
+set_property -name "nl.sdf_anno" -value "1" -objects $obj
+set_property -name "nl.write_all_overrides" -value "0" -objects $obj
+set_property -name "source_set" -value "sources_1" -objects $obj
+set_property -name "top" -value "dot11_tb" -objects $obj
+set_property -name "transport_int_delay" -value "0" -objects $obj
+set_property -name "transport_path_delay" -value "0" -objects $obj
+set_property -name "verilog_define" -value "" -objects $obj
+set_property -name "verilog_uppercase" -value "0" -objects $obj
+set_property -name "xelab.dll" -value "0" -objects $obj
+set_property -name "xsim.compile.tcl.pre" -value "" -objects $obj
+set_property -name "xsim.compile.xvhdl.more_options" -value "" -objects $obj
+set_property -name "xsim.compile.xvhdl.nosort" -value "1" -objects $obj
+set_property -name "xsim.compile.xvhdl.relax" -value "1" -objects $obj
+set_property -name "xsim.compile.xvlog.more_options" -value "" -objects $obj
+set_property -name "xsim.compile.xvlog.nosort" -value "1" -objects $obj
+set_property -name "xsim.compile.xvlog.relax" -value "1" -objects $obj
+set_property -name "xsim.elaborate.debug_level" -value "typical" -objects $obj
+set_property -name "xsim.elaborate.load_glbl" -value "1" -objects $obj
+set_property -name "xsim.elaborate.mt_level" -value "auto" -objects $obj
+set_property -name "xsim.elaborate.rangecheck" -value "0" -objects $obj
+set_property -name "xsim.elaborate.relax" -value "1" -objects $obj
+set_property -name "xsim.elaborate.sdf_delay" -value "sdfmax" -objects $obj
+set_property -name "xsim.elaborate.snapshot" -value "" -objects $obj
+set_property -name "xsim.elaborate.xelab.more_options" -value "" -objects $obj
+set_property -name "xsim.simulate.custom_tcl" -value "" -objects $obj
+set_property -name "xsim.simulate.log_all_signals" -value "0" -objects $obj
+set_property -name "xsim.simulate.runtime" -value "1000ns" -objects $obj
+set_property -name "xsim.simulate.saif" -value "" -objects $obj
+set_property -name "xsim.simulate.saif_all_signals" -value "0" -objects $obj
+set_property -name "xsim.simulate.saif_scope" -value "" -objects $obj
+set_property -name "xsim.simulate.tcl.post" -value "" -objects $obj
+set_property -name "xsim.simulate.wdb" -value "" -objects $obj
+set_property -name "xsim.simulate.xsim.more_options" -value "" -objects $obj
+
+# Create 'synth_1' run (if not found)
+if {[string equal [get_runs -quiet synth_1] ""]} {
+    create_run -name synth_1 -part xczu9eg-ffvb1156-2-e -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
+} else {
+  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
+  set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
+}
+set obj [get_runs synth_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Synthesis Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'synth_1_synth_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
+  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
+}
+set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.pblocks" -value "" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.slr" -value "0" -objects $obj
+set_property -name "options.packthru" -value "0" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+set obj [get_runs synth_1]
+set_property -name "constrset" -value "constrs_1" -objects $obj
+set_property -name "description" -value "Vivado Synthesis Defaults" -objects $obj
+set_property -name "flow" -value "Vivado Synthesis 2018" -objects $obj
+set_property -name "name" -value "synth_1" -objects $obj
+set_property -name "needs_refresh" -value "0" -objects $obj
+set_property -name "srcset" -value "sources_1" -objects $obj
+# set_property -name "incremental_checkpoint" -value "" -objects $obj
+set_property -name "include_in_archive" -value "1" -objects $obj
+set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
+set_property -name "steps.synth_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.synth_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.synth_design.args.flatten_hierarchy" -value "rebuilt" -objects $obj
+set_property -name "steps.synth_design.args.gated_clock_conversion" -value "off" -objects $obj
+set_property -name "steps.synth_design.args.bufg" -value "12" -objects $obj
+set_property -name "steps.synth_design.args.fanout_limit" -value "10000" -objects $obj
+set_property -name "steps.synth_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.synth_design.args.retiming" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.fsm_extraction" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.keep_equivalent_registers" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.resource_sharing" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.control_set_opt_threshold" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.no_lc" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.no_srlextract" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.shreg_min_size" -value "3" -objects $obj
+set_property -name "steps.synth_design.args.max_bram" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_uram" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_dsp" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_bram_cascade_height" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.max_uram_cascade_height" -value "-1" -objects $obj
+set_property -name "steps.synth_design.args.cascade_dsp" -value "auto" -objects $obj
+set_property -name "steps.synth_design.args.assert" -value "0" -objects $obj
+set_property -name "steps.synth_design.args.more options" -value "" -objects $obj
+
+# set the current synth run
+current_run -synthesis [get_runs synth_1]
+
+# Create 'impl_1' run (if not found)
+if {[string equal [get_runs -quiet impl_1] ""]} {
+    create_run -name impl_1 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
+} else {
+  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
+  set_property flow "Vivado Implementation 2018" [get_runs impl_1]
+}
+set obj [get_runs impl_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Implementation Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'impl_1_init_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_opt_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.upgrade_cw" -value "0" -objects $obj
+set_property -name "options.checks" -value "" -objects $obj
+set_property -name "options.ruledecks" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_io_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.pblocks" -value "" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.slr" -value "0" -objects $obj
+set_property -name "options.packthru" -value "0" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.hierarchical_percentages" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_control_sets_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.verbose" -value "1" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_place_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.upgrade_cw" -value "0" -objects $obj
+set_property -name "options.checks" -value "" -objects $obj
+set_property -name "options.ruledecks" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_methodology_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.checks" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_power_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.advisory" -value "0" -objects $obj
+set_property -name "options.xpe" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_route_status_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.of_objects" -value "" -objects $obj
+set_property -name "options.route_type" -value "" -objects $obj
+set_property -name "options.list_all_nets" -value "0" -objects $obj
+set_property -name "options.show_all" -value "0" -objects $obj
+set_property -name "options.has_routing" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "0" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.cells" -value "" -objects $obj
+set_property -name "options.hierarchical" -value "0" -objects $obj
+set_property -name "options.hierarchical_depth" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.write_xdc" -value "0" -objects $obj
+set_property -name "options.clock_roots_only" -value "0" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "1" -objects $obj
+set_property -name "options.check_timing_verbose" -value "0" -objects $obj
+set_property -name "options.delay_type" -value "" -objects $obj
+set_property -name "options.setup" -value "0" -objects $obj
+set_property -name "options.hold" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.nworst" -value "" -objects $obj
+set_property -name "options.unique_pins" -value "0" -objects $obj
+set_property -name "options.path_type" -value "" -objects $obj
+set_property -name "options.slack_lesser_than" -value "" -objects $obj
+set_property -name "options.report_unconstrained" -value "0" -objects $obj
+set_property -name "options.warn_on_violation" -value "1" -objects $obj
+set_property -name "options.significant_digits" -value "" -objects $obj
+set_property -name "options.cell" -value "" -objects $obj
+set_property -name "options.more_options" -value "" -objects $obj
+
+}
+set obj [get_runs impl_1]
+set_property -name "constrset" -value "constrs_1" -objects $obj
+set_property -name "description" -value "Default settings for Implementation." -objects $obj
+set_property -name "flow" -value "Vivado Implementation 2018" -objects $obj
+set_property -name "name" -value "impl_1" -objects $obj
+set_property -name "needs_refresh" -value "0" -objects $obj
+set_property -name "pr_configuration" -value "" -objects $obj
+set_property -name "srcset" -value "sources_1" -objects $obj
+# set_property -name "incremental_checkpoint" -value "" -objects $obj
+set_property -name "include_in_archive" -value "1" -objects $obj
+set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
+set_property -name "steps.opt_design.is_enabled" -value "1" -objects $obj
+set_property -name "steps.opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.opt_design.args.verbose" -value "0" -objects $obj
+set_property -name "steps.opt_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.power_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.power_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.power_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.power_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.place_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.place_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.place_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.place_design.args.more options" -value "" -objects $obj
+set_property -name "steps.post_place_power_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.post_place_power_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.post_place_power_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.post_place_power_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.phys_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.phys_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.phys_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.phys_opt_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.phys_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.route_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.route_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.route_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.route_design.args.more options" -value "" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "0" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.tcl.pre" -value "" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.tcl.post" -value "" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Default" -objects $obj
+set_property -name "steps.post_route_phys_opt_design.args.more options" -value "" -objects $obj
+set_property -name "steps.write_bitstream.tcl.pre" -value "" -objects $obj
+set_property -name "steps.write_bitstream.tcl.post" -value "" -objects $obj
+set_property -name "steps.write_bitstream.args.raw_bitfile" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.mask_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.no_binary_bitfile" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.bin_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.logic_location_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.more options" -value "" -objects $obj
+
+# set the current impl run
+current_run -implementation [get_runs impl_1]
+
+puts "INFO: Project created:$project_name"
diff --git a/verilog/dot11_tb.v b/verilog/dot11_tb.v
index cbdb103..c10cbaa 100644
--- a/verilog/dot11_tb.v
+++ b/verilog/dot11_tb.v
@@ -49,6 +49,7 @@ reg signal_done;
 
 wire [3:0] dot11_state;
 
+wire pkt_header_valid;
 wire pkt_header_valid_strobe;
 wire [7:0] byte_out;
 wire byte_out_strobe;
@@ -64,6 +65,10 @@ reg [7:0] set_addr;
 reg [31:0] set_data;
 
 wire fcs_out_strobe, fcs_ok;
+wire demod_is_ongoing;
+wire receiver_rst;
+
+wire sig_valid = (pkt_header_valid_strobe&pkt_header_valid);
 
 integer addr;
 
@@ -309,10 +314,28 @@ always @(posedge clock) begin
     end
 end
 
+signal_watchdog signal_watchdog_inst (
+    .clk(clock),
+    .rstn(~reset),
+    .enable(~demod_is_ongoing),
+
+    .i_data(sample_in[31:16]),
+    .q_data(sample_in[15:0]),
+    .iq_valid(sample_in_strobe),
+
+    .signal_len(pkt_len),
+    .sig_valid(sig_valid),
+
+    .max_signal_len_th(137),
+    .dc_running_sum_th(62),
+
+    .receiver_rst(receiver_rst)
+);
+
 dot11 dot11_inst (
     .clock(clock),
     .enable(enable),
-    .reset(reset),
+    .reset(reset|receiver_rst),
 
     //.set_stb(set_stb),
     //.set_addr(set_addr),
@@ -326,6 +349,8 @@ dot11 dot11_inst (
     .sample_in_strobe(sample_in_strobe),
     .soft_decoding(1'b1),
 
+    .demod_is_ongoing(demod_is_ongoing),
+    .pkt_header_valid(pkt_header_valid),
     .pkt_header_valid_strobe(pkt_header_valid_strobe),
     .pkt_len(pkt_len),
     .pkt_len_total(pkt_len_total),
diff --git a/verilog/openofdm_rx.v b/verilog/openofdm_rx.v
index 994f528..6caaa42 100644
--- a/verilog/openofdm_rx.v
+++ b/verilog/openofdm_rx.v
@@ -108,12 +108,33 @@
 
 	assign slv_reg31 = `OPENOFDM_RX_GIT_REV;
 
+	wire sig_valid = (pkt_header_valid_strobe&pkt_header_valid);
+	wire receiver_rst;
+
+	signal_watchdog signal_watchdog_inst (
+		.clk(s00_axi_aclk),
+		.rstn(s00_axi_aresetn),
+		.enable(~demod_is_ongoing),
+
+		.i_data(sample_in[31:16]),
+		.q_data(sample_in[15:0]),
+		.iq_valid(sample_in_strobe),
+
+		.signal_len(pkt_len),
+    	.sig_valid(sig_valid),
+
+    	.max_signal_len_th(slv_reg4[31:16]),
+		.dc_running_sum_th(slv_reg2[23:16]),
+
+		.receiver_rst(receiver_rst)
+	);
+
 	dot11 # ( 
 	) dot11_i (
 		.clock(s00_axi_aclk),
 		.enable( 1 ),
 		//.reset ( (~s00_axi_aresetn)|slv_reg0[0]|openofdm_core_rst ),
-		.reset ( (~s00_axi_aresetn)|slv_reg0[0] ),
+		.reset ( (~s00_axi_aresetn)|slv_reg0[0]|receiver_rst ),
 
 		.power_thres(slv_reg2[10:0]),
 		.min_plateau(slv_reg3),
@@ -262,7 +283,7 @@
         .SLV_REG17(slv_reg17),
         .SLV_REG18(slv_reg18),
         .SLV_REG19(slv_reg19),*/
-        .SLV_REG20(slv_reg20)/*
+        .SLV_REG20(slv_reg20),/*
         .SLV_REG21(slv_reg21),
         .SLV_REG22(slv_reg22),
         .SLV_REG23(slv_reg23),
diff --git a/verilog/running_sum.v b/verilog/running_sum.v
new file mode 100644
index 0000000..504a9af
--- /dev/null
+++ b/verilog/running_sum.v
@@ -0,0 +1,93 @@
+// Xianjun jiao. putaoshu@msn.com; xianjun.jiao@imec.be;
+
+module running_sum
+#(
+    parameter DATA_WIDTH = 16,
+    parameter LOG2_SUM_LEN = 6
+)
+(
+    input clk,
+    input rstn,
+
+    input signed [DATA_WIDTH-1:0] data_in,
+    input data_in_valid,
+
+    output reg signed [(DATA_WIDTH + LOG2_SUM_LEN-1):0] running_sum_result,
+    output reg data_out_valid
+);
+
+localparam FIFO_SIZE = 1<<LOG2_SUM_LEN;
+localparam TOTAL_WIDTH = DATA_WIDTH + LOG2_SUM_LEN;
+
+wire signed [DATA_WIDTH-1:0] data_in_old;
+
+wire signed [TOTAL_WIDTH-1:0] ext_data_in_old = {{LOG2_SUM_LEN{data_in_old[DATA_WIDTH-1]}}, data_in_old};
+wire signed [TOTAL_WIDTH-1:0] ext_data_in     = {{LOG2_SUM_LEN{data_in[DATA_WIDTH-1]}},     data_in    };
+
+reg data_in_valid_reg;
+reg rd_en, rd_en_start;
+wire [LOG2_SUM_LEN:0] wr_data_count;
+
+xpm_fifo_sync #(
+    .DOUT_RESET_VALUE("0"),    // String
+    .ECC_MODE("no_ecc"),       // String
+    .FIFO_MEMORY_TYPE("auto"), // String
+    .FIFO_READ_LATENCY(0),     // DECIMAL
+    .FIFO_WRITE_DEPTH(FIFO_SIZE),   // DECIMAL
+    .FULL_RESET_VALUE(0),      // DECIMAL
+    .PROG_EMPTY_THRESH(10),    // DECIMAL
+    .PROG_FULL_THRESH(10),     // DECIMAL
+    .RD_DATA_COUNT_WIDTH(LOG2_SUM_LEN+1),   // DECIMAL
+    .READ_DATA_WIDTH(DATA_WIDTH),      // DECIMAL
+    .READ_MODE("fwft"),         // String
+    .USE_ADV_FEATURES("0404"), // only enable rd_data_count and wr_data_count
+    .WAKEUP_TIME(0),           // DECIMAL
+    .WRITE_DATA_WIDTH(DATA_WIDTH),     // DECIMAL
+    .WR_DATA_COUNT_WIDTH(LOG2_SUM_LEN+1)    // DECIMAL
+  ) fifo_1clk_for_mv_avg_i (
+    .almost_empty(),
+    .almost_full(),
+    .data_valid(),
+    .dbiterr(),
+    .dout(data_in_old),
+    .empty(empty),
+    .full(full),
+    .overflow(),
+    .prog_empty(),
+    .prog_full(),
+    .rd_data_count(),
+    .rd_rst_busy(),
+    .sbiterr(),
+    .underflow(),
+    .wr_ack(),
+    .wr_data_count(wr_data_count),
+    .wr_rst_busy(),
+    .din(data_in),
+    .injectdbiterr(),
+    .injectsbiterr(),
+    .rd_en(rd_en),
+    .rst(~rstn),
+    .sleep(),
+    .wr_clk(clk),
+    .wr_en(data_in_valid)
+  );
+
+always @(posedge clk) begin
+    if (~rstn) begin
+        data_in_valid_reg <= 0;
+        running_sum_result <= 0;
+        data_out_valid <= 0;
+        rd_en <= 0;
+        rd_en_start <= 0;
+    end else begin
+        data_in_valid_reg <= data_in_valid;
+        data_out_valid <= data_in_valid_reg;
+        rd_en_start <= ((wr_data_count == FIFO_SIZE)?1:rd_en_start);
+        rd_en <= (rd_en_start?data_in_valid:rd_en);
+        if (data_in_valid) begin
+            running_sum_result <= running_sum_result + ext_data_in - (rd_en_start?ext_data_in_old:0);
+        end
+    end
+end
+
+endmodule
diff --git a/verilog/running_sum_dual_ch.v b/verilog/running_sum_dual_ch.v
new file mode 100644
index 0000000..7683c03
--- /dev/null
+++ b/verilog/running_sum_dual_ch.v
@@ -0,0 +1,103 @@
+// Xianjun jiao. putaoshu@msn.com; xianjun.jiao@imec.be;
+
+module running_sum_dual_ch
+#(
+    parameter DATA_WIDTH0 = 16,
+    parameter DATA_WIDTH1 = 16,
+    parameter LOG2_SUM_LEN = 6
+)
+(
+    input clk,
+    input rstn,
+
+    input signed [DATA_WIDTH0-1:0] data_in0,
+    input signed [DATA_WIDTH1-1:0] data_in1,
+    input data_in_valid,
+
+    output reg signed [(DATA_WIDTH0 + LOG2_SUM_LEN-1):0] running_sum_result0,
+    output reg signed [(DATA_WIDTH1 + LOG2_SUM_LEN-1):0] running_sum_result1,
+    output reg data_out_valid
+);
+
+localparam FIFO_SIZE = 1<<LOG2_SUM_LEN;
+localparam TOTAL_WIDTH0 = DATA_WIDTH0 + LOG2_SUM_LEN;
+localparam TOTAL_WIDTH1 = DATA_WIDTH1 + LOG2_SUM_LEN;
+
+wire signed [DATA_WIDTH0-1:0] data_in_old0;
+wire signed [DATA_WIDTH1-1:0] data_in_old1;
+
+wire signed [TOTAL_WIDTH0-1:0] ext_data_in_old0 = {{LOG2_SUM_LEN{data_in_old0[DATA_WIDTH0-1]}}, data_in_old0};
+wire signed [TOTAL_WIDTH0-1:0] ext_data_in0     = {{LOG2_SUM_LEN{data_in0[DATA_WIDTH0-1]}},     data_in0    };
+
+wire signed [TOTAL_WIDTH1-1:0] ext_data_in_old1 = {{LOG2_SUM_LEN{data_in_old1[DATA_WIDTH1-1]}}, data_in_old1};
+wire signed [TOTAL_WIDTH1-1:0] ext_data_in1     = {{LOG2_SUM_LEN{data_in1[DATA_WIDTH1-1]}},     data_in1    };
+
+reg data_in_valid_reg;
+reg rd_en, rd_en_start;
+wire [LOG2_SUM_LEN:0] wr_data_count;
+
+xpm_fifo_sync #(
+    .DOUT_RESET_VALUE("0"),    // String
+    .ECC_MODE("no_ecc"),       // String
+    .FIFO_MEMORY_TYPE("auto"), // String
+    .FIFO_READ_LATENCY(0),     // DECIMAL
+    .FIFO_WRITE_DEPTH(FIFO_SIZE),   // DECIMAL
+    .FULL_RESET_VALUE(0),      // DECIMAL
+    .PROG_EMPTY_THRESH(10),    // DECIMAL
+    .PROG_FULL_THRESH(10),     // DECIMAL
+    .RD_DATA_COUNT_WIDTH(LOG2_SUM_LEN+1),   // DECIMAL
+    .READ_DATA_WIDTH(DATA_WIDTH0+DATA_WIDTH1),      // DECIMAL
+    .READ_MODE("fwft"),         // String
+    .USE_ADV_FEATURES("0404"), // only enable rd_data_count and wr_data_count
+    .WAKEUP_TIME(0),           // DECIMAL
+    .WRITE_DATA_WIDTH(DATA_WIDTH0+DATA_WIDTH1),     // DECIMAL
+    .WR_DATA_COUNT_WIDTH(LOG2_SUM_LEN+1)    // DECIMAL
+) fifo_1clk_for_running_sum_dual_ch_i (
+    .almost_empty(),
+    .almost_full(),
+    .data_valid(),
+    .dbiterr(),
+    .dout({data_in_old1, data_in_old0}),
+    .empty(empty),
+    .full(full),
+    .overflow(),
+    .prog_empty(),
+    .prog_full(),
+    .rd_data_count(),
+    .rd_rst_busy(),
+    .sbiterr(),
+    .underflow(),
+    .wr_ack(),
+    .wr_data_count(wr_data_count),
+    .wr_rst_busy(),
+    .din({data_in1, data_in0}),
+    .injectdbiterr(),
+    .injectsbiterr(),
+    .rd_en(rd_en),
+    .rst(~rstn),
+    .sleep(),
+    .wr_clk(clk),
+    .wr_en(data_in_valid)
+  );
+
+always @(posedge clk) begin
+    if (~rstn) begin
+        data_in_valid_reg <= 0;
+        running_sum_result0 <= 0;
+        running_sum_result1 <= 0;
+        data_out_valid <= 0;
+        rd_en <= 0;
+        rd_en_start <= 0;
+    end else begin
+        data_in_valid_reg <= data_in_valid;
+        data_out_valid <= data_in_valid_reg;
+        rd_en_start <= ((wr_data_count == FIFO_SIZE)?1:rd_en_start);
+        rd_en <= (rd_en_start?data_in_valid:rd_en);
+        if (data_in_valid) begin
+            running_sum_result0 <= running_sum_result0 + ext_data_in0 - (rd_en_start?ext_data_in_old0:0);
+            running_sum_result1 <= running_sum_result1 + ext_data_in1 - (rd_en_start?ext_data_in_old1:0);
+        end
+    end
+end
+
+endmodule
diff --git a/verilog/signal_watchdog.v b/verilog/signal_watchdog.v
new file mode 100644
index 0000000..e4ded63
--- /dev/null
+++ b/verilog/signal_watchdog.v
@@ -0,0 +1,68 @@
+// Xianjun jiao. putaoshu@msn.com; xianjun.jiao@imec.be;
+
+module signal_watchdog
+#(
+    parameter integer IQ_DATA_WIDTH	= 16,
+    parameter LOG2_SUM_LEN = 6
+)
+(
+    input clk,
+    input rstn,
+    input enable,
+
+    input signed [(IQ_DATA_WIDTH-1):0] i_data,
+    input signed [(IQ_DATA_WIDTH-1):0] q_data,
+    input iq_valid,
+
+    input [15:0] signal_len,
+    input sig_valid,
+
+    input [15:0] max_signal_len_th,
+    input signed [(LOG2_SUM_LEN+2-1):0] dc_running_sum_th,
+
+    output receiver_rst
+);
+    wire signed [1:0] i_sign;
+    wire signed [1:0] q_sign;
+    wire signed [(LOG2_SUM_LEN+2-1):0] running_sum_result_i;
+    wire signed [(LOG2_SUM_LEN+2-1):0] running_sum_result_q;
+    wire signed [(LOG2_SUM_LEN+2-1):0] running_sum_result_i_abs;
+    wire signed [(LOG2_SUM_LEN+2-1):0] running_sum_result_q_abs;
+
+    wire receiver_rst_internal;
+    reg receiver_rst_reg;
+    wire receiver_rst_pulse;
+
+    assign i_sign = (i_data[(IQ_DATA_WIDTH-1)] ? -1 : 1);
+    assign q_sign = (q_data[(IQ_DATA_WIDTH-1)] ? -1 : 1);
+
+    assign running_sum_result_i_abs = (running_sum_result_i[LOG2_SUM_LEN+2-1]?(-running_sum_result_i):running_sum_result_i);
+    assign running_sum_result_q_abs = (running_sum_result_q[LOG2_SUM_LEN+2-1]?(-running_sum_result_q):running_sum_result_q);
+
+    assign receiver_rst_internal = (enable&(running_sum_result_i_abs>=dc_running_sum_th || running_sum_result_q_abs>=dc_running_sum_th));
+
+    assign receiver_rst_pulse = (receiver_rst_internal&&(~receiver_rst_reg));
+
+    assign receiver_rst = ( receiver_rst_reg | (sig_valid && (signal_len<14 || signal_len>max_signal_len_th)) );
+
+    always @(posedge clk) begin
+        if (~rstn) begin
+            receiver_rst_reg <= 0;
+        end else begin
+            receiver_rst_reg <= receiver_rst_internal;
+        end
+    end
+
+    running_sum_dual_ch #(.DATA_WIDTH0(2), .DATA_WIDTH1(2), .LOG2_SUM_LEN(LOG2_SUM_LEN)) signal_watchdog_running_sum_inst (
+        .clk(clk),
+        .rstn(rstn),
+
+        .data_in0(i_sign),
+        .data_in1(q_sign),
+        .data_in_valid(iq_valid),
+        .running_sum_result0(running_sum_result_i),
+        .running_sum_result1(running_sum_result_q),
+        .data_out_valid()
+    );
+
+endmodule