openofdm/docs/source/decode.rst

Decoding
========

Now we have corrected the residual CFO and also have corrected the channel gain,
the next step is to map the FFT output to actual data bits. This is the reverse
process of encoding a packet.

1. demodulation: complex number to bits
#. deinterleaving: shuffle the bits inside each OFDM symbol
#. Convolution decoding: remove redundancy and correct potential bit errors
#. Descramble.

Step 1 and 3 depend on the modulation and coding scheme, which can be obtained
from the SIGNAL field. The SIGNAL field is encoded in the first OFDM symbol
after the long preamble and is always BPSK modulated regardless of the actual
modulation. Recall that in
802.11a/g, one OFDM symbol contains 48 data sub-carriers, which corresponds to
48 data bits in BPSK scheme. The SIGNAL field is also convolutional encoded at
1/2 rate so there are 24 actual data bits in the SIGNAL field.

Next, we first go through the decoding process and then explain the format of
both legacy (802.11a/g) and the HT (802.11n) SIGNAL format.

Demodulation
------------

- **Module**: :file:`demodulate.v`
- **Input**: ``rate (7), cons_i (16), cons_q (16)``
- **Output**: ``bits (6)``

This step maps the complex number in the FFT plane into bits. :numref:`fig_mod`
shows the constellation encoding schemes for BPSK, QPSK, 16-QAM and 64-QAM.
also supported in |project|.

.. _fig_mod:
.. figure:: /images/mod.png
    :align: center
    :scale: 80%

    BPSK, QPSK, 16-QAM and 64-QAM Constellation Bit Encoding

Inside each OFDM symbol, each sub-carrier is mapped into 1, 2, 4 or 6 bits
depending on the modulation.

Deinterleaving
--------------

- **Module**: :file:`deinterleave.v`
- **Input**: ``rate (7), in_bits (6)``
- **Output**: ``out_bits (2), erase (2)``


Inside each OFDM symbol, the encoded bits are interleaved. To understand how the
block interleaver works, first we need to define a few parameters. Here we only
consider 802.11a/g and 802.11n single spatial stream mode.

.. table:: Modulation Dependent Parameters (802.11a/g)
    :align: center

    +------------+-------------+----------+------------------+------------------+------------------+
    | Modulation | Coding Rate | Bit-Rate | :math:`N_{BPSC}` | :math:`N_{CBPS}` | :math:`N_{DBPS}` |
    +------------+-------------+----------+------------------+------------------+------------------+
    | BPSK       | 1/2         | 6        | 1                | 48               | 24               |
    +------------+-------------+----------+------------------+------------------+------------------+
    | BPSK       | 3/4         | 9        | 1                | 48               | 36               |
    +------------+-------------+----------+------------------+------------------+------------------+
    | QPSK       | 1/2         | 12       | 2                | 96               | 48               |
    +------------+-------------+----------+------------------+------------------+------------------+
    | QPSK       | 3/4         | 18       | 2                | 96               | 72               |
    +------------+-------------+----------+------------------+------------------+------------------+
    | 16-QAM     | 1/2         | 24       | 4                | 192              | 96               |
    +------------+-------------+----------+------------------+------------------+------------------+
    | 16-QAM     | 3/4         | 36       | 4                | 192              | 144              |
    +------------+-------------+----------+------------------+------------------+------------------+
    | 64-QAM     | 2/3         | 48       | 6                | 288              | 192              |
    +------------+-------------+----------+------------------+------------------+------------------+
    | 64-QAM     | 3/4         | 54       | 6                | 288              | 216              |
    +------------+-------------+----------+------------------+------------------+------------------+

where:

- :math:`N_{BPSC}`: number of bits per sub-carrier
- :math:`N_{CBPS}`: number of coded bits per OFDM symbol
- :math:`N_{DBPS}`: number of data bits per OFDM symbol

Let :math:`s=max(N_{BPSC}/2,1)` be the number of bits along the real (or
imaginary) axis in the constellation plane. The interleaver is based on writing
the data bits in rows and reading them out in columns.

.. table:: Row and Columns of 802.11 Interleaver
    :align: center
    
    +-----------------+--------------------------+--------------------------+
    |                 | 802.11a/g                | 802.11n 20MHz            |
    +-----------------+--------------------------+--------------------------+
    | :math:`N_{COL}` | 16                       | 13                       |
    +-----------------+--------------------------+--------------------------+
    | :math:`N_{ROW}` | :math:`3\times N_{BPSC}` | :math:`4\times N_{BPSC}` |
    +-----------------+--------------------------+--------------------------+

The interleaving process involves two permutations. Let :math:`k` be the index
of the bit index before the first permutation, :math:`i` be the index after the
first but before the second permutation, and :math:`j` be the index after the
second permutation.

The first permutation (:math:`k\rightarrow i`) of interleaving ensures adjacent
code bits are mapped to non-adjacent sub-carriers, and is defined as:

.. math::

    i = N_{ROW}\times(k \bmod N_{COL}) + \lfloor \frac{k}{N_{COL}}\rfloor


And the second permutation (:math:`i\rightarrow j`) ensures that adjacent code
bits are mapped alternatively to less or more significant bits in constellation
point, and is defined as:

.. math::
    :label: eq_second_permute
    
    j = s\times\lfloor\frac{i}{s}\rfloor + (i+N_{CBPS}-\lfloor N_{COL}\times\frac{i}{N_{CBPS}}\rfloor)\bmod s
    

The deinterleaving process involves two permutations as well to reverse the two
permutations in interleaving process.

First, to reverse the second permutation (:eq:`eq_second_permute`):

.. math::

    i = s\times\lfloor\frac{j}{s}\rfloor + (j+\lfloor N_{COL}\times\frac{j}{N_{CBPS}}\rfloor)\bmod s

And to reverse the first permutation:

.. math::

    k = N_{COL}\times i-(N_{CBPS}-1)\times\lfloor \frac{i}{N_{ROW}} \rfloor

In |project|, the deinterleaving is performed using look up table. First, the
bits in one OFDM symbol are stored in a two-port RAM. Then the bits are read
according to the look up table.

.. _fig_deinter_lut:
.. figure:: /images/deinter_lut.png
    :align: center

    Deinterleave Look Up Table

As shown in :numref:`fig_deinter_lut`, the raw bits of one OFDM symbol is first
stored in the permutation buffer. The buffer entry is 6-bit wide to accommodate
64-QAM. For other modulations, only the lower :math:`N_{BPSC}` bits are valid.
The buffer has 48 (802.11a/g) or 52 (802.11n) rows depend on whether HT is used.

After all the bits inside one OFDM symbol are written to the permutation buffer,
we first get the base address of the sub look up table for current modulation
scheme. For 802.11a/g, the key is the rate bits inside the SIGNAL field. For
802.11n, the key is :math:`mcs+16`. The next step is to read the look up table
to determine which bits to output next.

The lookup table entry is 22 bits wide, which contains:

- ``null_a/null_b``: whether the current bit is valid (for punctuation in
  Viterbi decoding next)
- ``addra/bita``: the first bit to output
- ``addrb/bitb``: the second bit to output
- ``out_stb``: output strobe
- ``done``: end of sub-LUT for current modulation

Note that the deinterleave module output 2 bits at each clock cycle. The look up
table is generated by :file:`scripts/gen_deinter_lut.py`.

For non 1/2 modulation rates, we need to compensate for the punctuation in the
deinterleaving step to make following Viterbi decoding easier. This is achieved
by inserting dummy bits (via the ``null_a/null_b`` bits) accordingly. The exact
punctuation pattern can be found in Figure 18-9 in :download:`802.11-2012 std
<./files/802.11-2012.pdf>`.


Viterbi Decoding
----------------

The transmitted bits are convolutional encoded which adds redundancy to the bits
and help the receiver fix bit errors. The decoding can be performed using
`Viterbi algorithm <https://en.wikipedia.org/wiki/Viterbi_algorithm>`_. We
utilize the Viterbi IP core provided by Xilinx. It is not free but you can
obtain a evaluation license. The limitation of the evaluation license is that
the core will stop working after certain time (several hours) after the FPGA is
powered up.

The Viterbi core handles most of the heavy lifting and we only need to feed it
with the de-punctured bits output from the deinterleave module.

For SIGNAL or HT-SIG fields, the decoding stops here. For data symbols, the last
step is to descramble.


Descrambling
------------

The scrambling step at the transmitter side is to avoid long consecutive
sequences of 0s or 1s. The scrambling and descrambling process can be realized
using the same logic.


.. figure:: /images/scrambler.png
    :align: center
    :scale: 80%

    Scrambler/Descrambler Logic

Suppose the current input bit is :math:`B`, the output bit :math:`B'` and the
internal state of the scrambler is updated as follows:

.. math::

    B' &\leftarrow X^1 \oplus B\\
    X^1 &\leftarrow X^7 \oplus X^4\\
    X^i &\leftarrow X^{i-1}, i = 2, 3,\ldots, 7

At the transmitter side, for each packet, the scrambler is loaded with pseudo
random value. The very first 7 bits of the data bits is preset to zero before
scrambling, so that the receiver can estimate the value using the scrambled
bits.