mirror of
https://github.com/k3ng/k3ng_rotator_controller.git
synced 2024-12-21 06:03:12 +00:00
working on stepper motor and incremental encoder code
This commit is contained in:
Anthony Good
parent
cbe9fd7f61
commit
f1b1322990
@ -323,9 +323,11 @@
|
||||
|
||||
OPTION_SCANCON_2RMHF3600_INC_ENCODER - thanks Jasper, PA2J
|
||||
|
||||
Fixed compile bug with OPTION_EL_MANUAL_ROTATE_LIMITS) when FEATURE_ELEVATION_CONTROL is not enabled
|
||||
|
||||
*/
|
||||
|
||||
#define CODE_VERSION "2.0.2015021501"
|
||||
#define CODE_VERSION "2.0.2015022701"
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include <EEPROM.h>
|
||||
@ -407,6 +409,7 @@
|
||||
#include "rotator_pins_m0upu.h"
|
||||
#endif
|
||||
#ifdef HARDWARE_WB6KCN
|
||||
//#include "rotator_pins_wb6kcn_az_test_setup.h"
|
||||
#include "rotator_pins_wb6kcn.h"
|
||||
#endif
|
||||
#if !defined(HARDWARE_M0UPU) && !defined(HARDWARE_EA4TX_ARS_USB) &&!defined(HARDWARE_WB6KCN)
|
||||
@ -652,6 +655,18 @@ volatile int el_position_incremental_encoder_interrupt = 0;
|
||||
#endif // DEBUG_EL_POSITION_INCREMENTAL_ENCODER
|
||||
#endif // FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
|
||||
#ifdef FEATURE_AZ_POSITION_INCREMENTAL_ENCODER
|
||||
volatile byte read_azimuth_lock = 0;
|
||||
#endif
|
||||
|
||||
#ifdef FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
volatile byte read_elevation_lock = 0;
|
||||
#endif
|
||||
|
||||
#if defined(FEATURE_AZ_POSITION_INCREMENTAL_ENCODER) || defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER)
|
||||
volatile byte service_rotation_lock = 0;
|
||||
#endif
|
||||
|
||||
#if defined(FEATURE_REMOTE_UNIT_SLAVE) || defined(FEATURE_YAESU_EMULATION) || defined(FEATURE_EASYCOM_EMULATION) || defined(FEATURE_CLOCK)
|
||||
HardwareSerial * control_port;
|
||||
#endif
|
||||
@ -823,13 +838,12 @@ void loop() {
|
||||
#endif
|
||||
#endif // ndef FEATURE_REMOTE_UNIT_SLAVE
|
||||
|
||||
read_headings();
|
||||
//read_headings();
|
||||
|
||||
#ifdef FEATURE_LCD_DISPLAY
|
||||
update_display();
|
||||
#endif
|
||||
|
||||
read_headings();
|
||||
|
||||
#ifndef FEATURE_REMOTE_UNIT_SLAVE
|
||||
#ifdef OPTION_AZ_MANUAL_ROTATE_LIMITS
|
||||
@ -837,12 +851,13 @@ void loop() {
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef OPTION_EL_MANUAL_ROTATE_LIMITS
|
||||
#if defined(OPTION_EL_MANUAL_ROTATE_LIMITS) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
check_el_manual_rotate_limit();
|
||||
#endif
|
||||
|
||||
check_az_speed_pot();
|
||||
|
||||
|
||||
#ifdef FEATURE_AZ_PRESET_ENCODER // Rotary Encoder or Preset Selector
|
||||
check_preset_encoders();
|
||||
#else
|
||||
@ -854,9 +869,14 @@ void loop() {
|
||||
output_debug();
|
||||
#endif //DEBUG_DUMP
|
||||
|
||||
read_headings();
|
||||
#ifndef FEATURE_REMOTE_UNIT_SLAVE
|
||||
service_rotation();
|
||||
#endif
|
||||
|
||||
check_for_dirty_configuration();
|
||||
|
||||
read_headings();
|
||||
|
||||
|
||||
#ifdef DEBUG_PROFILE_LOOP_TIME
|
||||
profile_loop_time();
|
||||
@ -898,6 +918,11 @@ void loop() {
|
||||
service_gps();
|
||||
#endif // FEATURE_GPS
|
||||
|
||||
read_headings();
|
||||
#ifndef FEATURE_REMOTE_UNIT_SLAVE
|
||||
service_rotation();
|
||||
#endif
|
||||
|
||||
#ifdef FEATURE_RTC
|
||||
service_rtc();
|
||||
#endif // FEATURE_RTC
|
||||
@ -920,9 +945,6 @@ void loop() {
|
||||
service_analog_output_pins();
|
||||
#endif //FEATURE_ANALOG_OUTPUT_PINS
|
||||
|
||||
#if defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && defined(FEATURE_STEPPER_MOTOR)
|
||||
service_stepper_motor_pulse_pins();
|
||||
#endif
|
||||
|
||||
#if defined(FEATURE_SUN_PUSHBUTTON_AZ_EL_CALIBRATION) && defined(FEATURE_SUN_TRACKING)
|
||||
check_sun_pushbutton_calibration();
|
||||
@ -1162,7 +1184,7 @@ void initialize_rotary_encoders(){
|
||||
az_3_phase_encoder_last_phase_b_state = digitalRead(az_incremental_encoder_pin_phase_b);
|
||||
#endif // FEATURE_AZ_POSITION_INCREMENTAL_ENCODER
|
||||
|
||||
#ifdef FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
#if defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
pinMode(el_incremental_encoder_pin_phase_a, INPUT);
|
||||
pinMode(el_incremental_encoder_pin_phase_b, INPUT);
|
||||
pinMode(el_incremental_encoder_pin_phase_z, INPUT);
|
||||
@ -1176,7 +1198,7 @@ void initialize_rotary_encoders(){
|
||||
delay(250);
|
||||
el_3_phase_encoder_last_phase_a_state = digitalRead(el_incremental_encoder_pin_phase_a);
|
||||
el_3_phase_encoder_last_phase_b_state = digitalRead(el_incremental_encoder_pin_phase_b);
|
||||
#endif // FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
#endif // defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
|
||||
} /* initialize_rotary_encoders */
|
||||
|
||||
@ -2182,14 +2204,14 @@ void check_serial(){
|
||||
}
|
||||
control_port_buffer[0] = 'Z';
|
||||
process_easycom_command(control_port_buffer,1,CONTROL_PORT0,return_string);
|
||||
//control_port->println(return_string); zzzzzz
|
||||
//control_port->println(return_string);
|
||||
control_port->print(return_string);
|
||||
#ifndef OPTION_HAMLIB_EASYCOM_NO_TERMINATOR_CHARACTER_HACK
|
||||
control_port->write(incoming_serial_byte);
|
||||
#endif //OPTION_HAMLIB_EASYCOM_NO_TERMINATOR_CHARACTER_HACK
|
||||
} else { // we got just a bare AZ command
|
||||
process_easycom_command(control_port_buffer,control_port_buffer_index,CONTROL_PORT0,return_string);
|
||||
//control_port->println(return_string); zzzzzz
|
||||
//control_port->println(return_string);
|
||||
control_port->print(return_string);
|
||||
#ifndef OPTION_HAMLIB_EASYCOM_NO_TERMINATOR_CHARACTER_HACK
|
||||
control_port->write(incoming_serial_byte);
|
||||
@ -2199,7 +2221,7 @@ void check_serial(){
|
||||
|
||||
if (control_port_buffer_index > 1){
|
||||
process_easycom_command(control_port_buffer,control_port_buffer_index,CONTROL_PORT0,return_string);
|
||||
//control_port->println(return_string); zzzzzz
|
||||
//control_port->println(return_string);
|
||||
control_port->print(return_string);
|
||||
#ifndef OPTION_HAMLIB_EASYCOM_NO_TERMINATOR_CHARACTER_HACK
|
||||
control_port->write(incoming_serial_byte);
|
||||
@ -2210,7 +2232,7 @@ void check_serial(){
|
||||
#else //defined(OPTION_HAMLIB_EASYCOM_AZ_EL_COMMAND_HACK) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
if (control_port_buffer_index > 1){
|
||||
process_easycom_command(control_port_buffer,control_port_buffer_index,CONTROL_PORT0,return_string);
|
||||
//control_port->println(return_string); zzzzzz
|
||||
//control_port->println(return_string);
|
||||
control_port->print(return_string);
|
||||
#ifndef OPTION_HAMLIB_EASYCOM_NO_TERMINATOR_CHARACTER_HACK
|
||||
control_port->write(incoming_serial_byte);
|
||||
@ -4102,6 +4124,11 @@ void check_timed_interval(){
|
||||
void read_azimuth(byte force_read){
|
||||
|
||||
|
||||
#ifdef FEATURE_AZ_POSITION_INCREMENTAL_ENCODER
|
||||
read_azimuth_lock = 1;
|
||||
#endif
|
||||
|
||||
|
||||
unsigned int previous_raw_azimuth = raw_azimuth;
|
||||
static unsigned long last_measurement_time = 0;
|
||||
|
||||
@ -4465,6 +4492,11 @@ void read_azimuth(byte force_read){
|
||||
last_measurement_time = millis();
|
||||
}
|
||||
|
||||
#ifdef FEATURE_AZ_POSITION_INCREMENTAL_ENCODER
|
||||
read_azimuth_lock = 0;
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
} /* read_azimuth */
|
||||
|
||||
@ -4874,15 +4906,9 @@ void output_debug(){
|
||||
debug_println("");
|
||||
#endif //FEATURE_GPS
|
||||
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
//debug_print("service_stepper_motor_pulse_pins_count: ");
|
||||
//char service_stepper_motor_pulse_pins_count_temp[12];
|
||||
//dtostrf(service_stepper_motor_pulse_pins_count,0,0,service_stepper_motor_pulse_pins_count_temp);
|
||||
//debug_println(service_stepper_motor_pulse_pins_count_temp);
|
||||
#endif FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
|
||||
#ifdef FEATURE_AUTOCORRECT
|
||||
debug_print("\t\Autocorrect: AZ:");
|
||||
debug_print("\t\tAutocorrect: AZ:");
|
||||
switch(autocorrect_state_az){
|
||||
case AUTOCORRECT_INACTIVE: debug_print("INACTIVE"); break;
|
||||
case AUTOCORRECT_WAITING_AZ: debug_print("AUTOCORRECT_WAITING_AZ: "); debug_print_float(autocorrect_az,2); break;
|
||||
@ -5047,98 +5073,16 @@ void el_check_operation_timeout(){
|
||||
}
|
||||
#endif
|
||||
|
||||
// --------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
// #ifdef FEATURE_YAESU_EMULATION
|
||||
// void yaesu_w_command(){
|
||||
|
||||
// // parse out W command
|
||||
// // Short Format: WXXX YYY = azimuth YYY = elevation
|
||||
// // Long Format : WSSS XXX YYY SSS = timed interval XXX = azimuth YYY = elevation
|
||||
|
||||
// int parsed_elevation = 0;
|
||||
// int parsed_azimuth = 0;
|
||||
|
||||
// #ifdef FEATURE_TIMED_BUFFER
|
||||
// int parsed_value1 = 0;
|
||||
// int parsed_value2 = 0;
|
||||
// #endif //FEATURE_TIMED_BUFFER
|
||||
|
||||
// if (control_port_buffer_index > 8) { // if there are more than 4 characters in the command buffer, we got a timed interval command
|
||||
// #if defined(FEATURE_TIMED_BUFFER) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
// parsed_value1 = ((int(control_port_buffer[1]) - 48) * 100) + ((int(control_port_buffer[2]) - 48) * 10) + (int(control_port_buffer[3]) - 48);
|
||||
// if ((parsed_value1 > 0) && (parsed_value1 < 1000)) {
|
||||
// timed_buffer_interval_value_seconds = parsed_value1;
|
||||
// for (int x = 5; x < control_port_buffer_index; x = x + 8) {
|
||||
// parsed_value1 = ((int(control_port_buffer[x]) - 48) * 100) + ((int(control_port_buffer[x + 1]) - 48) * 10) + (int(control_port_buffer[x + 2]) - 48);
|
||||
// parsed_value2 = ((int(control_port_buffer[x + 4]) - 48) * 100) + ((int(control_port_buffer[x + 5]) - 48) * 10) + (int(control_port_buffer[x + 6]) - 48);
|
||||
// if ((parsed_value1 > -1) && (parsed_value1 < 361) && (parsed_value2 > -1) && (parsed_value2 < 181)) { // is it a valid azimuth?
|
||||
// timed_buffer_azimuths[timed_buffer_number_entries_loaded] = (parsed_value1 * HEADING_MULTIPLIER);
|
||||
// timed_buffer_elevations[timed_buffer_number_entries_loaded] = (parsed_value2 * HEADING_MULTIPLIER);
|
||||
// timed_buffer_number_entries_loaded++;
|
||||
// timed_buffer_status = LOADED_AZIMUTHS_ELEVATIONS;
|
||||
// if (timed_buffer_number_entries_loaded > TIMED_INTERVAL_ARRAY_SIZE) { // is the array full?
|
||||
// x = control_port_buffer_index; // array is full, go to the first azimuth and elevation
|
||||
|
||||
// }
|
||||
// } else { // we hit an invalid bearing
|
||||
// timed_buffer_status = EMPTY;
|
||||
// timed_buffer_number_entries_loaded = 0;
|
||||
// control_port->println(F("?>")); // error
|
||||
// return;
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
// timed_buffer_entry_pointer = 1; // go to the first bearings
|
||||
// parsed_azimuth = timed_buffer_azimuths[0];
|
||||
// parsed_elevation = timed_buffer_elevations[0];
|
||||
// #else /* ifdef FEATURE_TIMED_BUFFER */
|
||||
// control_port->println(F("Feature not activated ?>"));
|
||||
// #endif // FEATURE_TIMED_BUFFER
|
||||
// } else {
|
||||
// // this is a short form W command, just parse the azimuth and elevation and initiate rotation
|
||||
// parsed_azimuth = (((int(control_port_buffer[1]) - 48) * 100) + ((int(control_port_buffer[2]) - 48) * 10) + (int(control_port_buffer[3]) - 48)) * HEADING_MULTIPLIER;
|
||||
// parsed_elevation = (((int(control_port_buffer[5]) - 48) * 100) + ((int(control_port_buffer[6]) - 48) * 10) + (int(control_port_buffer[7]) - 48)) * HEADING_MULTIPLIER;
|
||||
// }
|
||||
|
||||
// if ((parsed_azimuth >= 0) && (parsed_azimuth <= (360 * HEADING_MULTIPLIER))) {
|
||||
// submit_request(AZ, REQUEST_AZIMUTH, parsed_azimuth);
|
||||
// } else {
|
||||
// #ifdef DEBUG_YAESU
|
||||
// if (debug_mode) {
|
||||
// control_port->println(F("yaesu_w_command: W command elevation error"));
|
||||
// }
|
||||
// #endif // DEBUG_YAESU
|
||||
// control_port->println(F("?>")); // bogus elevation - return and error and don't do anything
|
||||
// return;
|
||||
// }
|
||||
|
||||
// #ifdef FEATURE_ELEVATION_CONTROL
|
||||
// if ((parsed_elevation >= 0) && (parsed_elevation <= (180 * HEADING_MULTIPLIER))) {
|
||||
// submit_request(EL, REQUEST_ELEVATION, parsed_elevation);
|
||||
// } else {
|
||||
// #ifdef DEBUG_YAESU
|
||||
// if (debug_mode) {
|
||||
// control_port->println(F("yaesu_w_command: W command elevation error"));
|
||||
// }
|
||||
// #endif // DEBUG_YAESU
|
||||
// control_port->println(F("?>")); // bogus elevation - return and error and don't do anything
|
||||
// return;
|
||||
// }
|
||||
// #endif // FEATURE_ELEVATION_CONTROL
|
||||
// control_port->println();
|
||||
|
||||
// } /* yaesu_w_command */
|
||||
// #endif // FEATURE_YAESU_EMULATION
|
||||
|
||||
|
||||
// --------------------------------------------------------------
|
||||
|
||||
#ifdef FEATURE_ELEVATION_CONTROL
|
||||
void read_elevation(byte force_read){
|
||||
// read analog input and convert it to degrees
|
||||
|
||||
#ifdef FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
read_elevation_lock = 1;
|
||||
#endif
|
||||
|
||||
|
||||
unsigned int previous_elevation = elevation;
|
||||
static unsigned long last_measurement_time = 0;
|
||||
@ -5416,6 +5360,11 @@ void read_elevation(byte force_read){
|
||||
|
||||
|
||||
|
||||
#ifdef FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
read_elevation_lock = 0;
|
||||
#endif
|
||||
|
||||
|
||||
} /* read_elevation */
|
||||
#endif /* ifdef FEATURE_ELEVATION_CONTROL */
|
||||
|
||||
@ -5476,22 +5425,7 @@ void update_el_variable_outputs(byte speed_voltage){
|
||||
debug_print("\tel_stepper_motor_pulse: ");
|
||||
#endif // DEBUG_VARIABLE_OUTPUTS
|
||||
el_tone = map(speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH);
|
||||
/*
|
||||
#if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
if ((el_tone < 31) && (el_tone != 0)) {el_tone = 31;}
|
||||
if (el_tone > 20000) {el_tone = 20000;}
|
||||
if (el_tone > 0) {
|
||||
tone(el_stepper_motor_pulse,el_tone);
|
||||
} else {
|
||||
noTone(el_stepper_motor_pulse);
|
||||
}
|
||||
#endif
|
||||
|
||||
//zzzzzzzz
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,el_tone);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
*/
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
set_el_stepper_freq(el_tone);
|
||||
#endif
|
||||
@ -5502,7 +5436,7 @@ void update_el_variable_outputs(byte speed_voltage){
|
||||
#ifdef DEBUG_VARIABLE_OUTPUTS
|
||||
debug_print_int(el_tone);
|
||||
#endif // DEBUG_VARIABLE_OUTPUTS
|
||||
//tone(el_stepper_motor_pulse, map(speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
|
||||
@ -5605,27 +5539,7 @@ void update_az_variable_outputs(byte speed_voltage){
|
||||
debug_print("\taz_stepper_motor_pulse: ");
|
||||
#endif // DEBUG_VARIABLE_OUTPUTS
|
||||
az_tone = map(speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH);
|
||||
/*
|
||||
#if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
if ((az_tone < 31) && (az_tone != 0)) {az_tone = 31;}
|
||||
if (az_tone > 20000) {az_tone = 20000;}
|
||||
if (az_tone > 0) {
|
||||
tone(az_stepper_motor_pulse,az_tone);
|
||||
} else {
|
||||
noTone(az_stepper_motor_pulse);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_az_stepper_freq(az_stepper_motor_pulse,az_tone);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
*/
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
set_az_stepper_freq(az_tone);
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
#ifdef DEBUG_VARIABLE_OUTPUTS
|
||||
debug_print_int(az_tone);
|
||||
#endif // DEBUG_VARIABLE_OUTPUTS
|
||||
@ -5694,18 +5608,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (az_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(az_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,LOW);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_az_stepper_freq(az_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,LOW);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2*/
|
||||
set_az_stepper_freq(0);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,LOW);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
|
||||
@ -5727,15 +5631,7 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (az_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
tone(az_stepper_motor_pulse, map(normal_az_speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_az_stepper_freq(az_stepper_motor_pulse,map(normal_az_speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2 */
|
||||
set_az_stepper_freq(map(normal_az_speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
}
|
||||
@ -5794,18 +5690,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (az_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(az_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,HIGH);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_az_stepper_freq(az_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,HIGH);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2 */
|
||||
set_az_stepper_freq(0);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,HIGH);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
}
|
||||
@ -5841,19 +5727,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (az_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(az_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,LOW);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_az_stepper_freq(az_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,LOW);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_az_stepper_freq(0);
|
||||
digitalWriteEnhanced(az_stepper_motor_pulse,LOW);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
} else {
|
||||
@ -5874,16 +5749,7 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (az_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
tone(az_stepper_motor_pulse, map(normal_az_speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_az_stepper_freq(az_stepper_motor_pulse,map(normal_az_speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_az_stepper_freq(map(normal_az_speed_voltage, 0, 255, AZ_VARIABLE_FREQ_OUTPUT_LOW, AZ_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
}
|
||||
@ -5937,7 +5803,7 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
break;
|
||||
|
||||
#ifdef FEATURE_ELEVATION_CONTROL
|
||||
#ifdef FEATURE_ELEVATION_CONTROL
|
||||
|
||||
|
||||
case UP:
|
||||
@ -5971,19 +5837,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (el_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(el_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_el_stepper_freq(0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
} else {
|
||||
@ -6001,16 +5856,7 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (el_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
tone(el_stepper_motor_pulse, map(normal_el_speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,map(normal_el_speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_el_stepper_freq(map(normal_el_speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
if (rotate_down_freq) {
|
||||
@ -6064,20 +5910,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (el_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(el_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_el_stepper_freq(0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
}
|
||||
@ -6114,19 +5948,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (el_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(el_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_el_stepper_freq(0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
} else {
|
||||
@ -6147,19 +5970,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (el_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
tone(el_stepper_motor_pulse, map(normal_el_speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,map(normal_el_speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_el_stepper_freq(map(normal_el_speed_voltage, 0, 255, EL_VARIABLE_FREQ_OUTPUT_LOW, EL_VARIABLE_FREQ_OUTPUT_HIGH));
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,LOW);
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
}
|
||||
@ -6210,19 +6022,8 @@ void rotator(byte rotation_action, byte rotation_type) {
|
||||
}
|
||||
#ifdef FEATURE_STEPPER_MOTOR
|
||||
if (el_stepper_motor_pulse) {
|
||||
/* #if !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && !defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2)
|
||||
noTone(el_stepper_motor_pulse);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
#endif
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
set_el_stepper_freq(el_stepper_motor_pulse,0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
*/
|
||||
set_el_stepper_freq(0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
// #endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE_2
|
||||
set_el_stepper_freq(0);
|
||||
digitalWriteEnhanced(el_stepper_motor_pulse,HIGH);
|
||||
}
|
||||
#endif //FEATURE_STEPPER_MOTOR
|
||||
}
|
||||
@ -6775,6 +6576,12 @@ void submit_request(byte axis, byte request, int parm, byte called_by){
|
||||
// --------------------------------------------------------------
|
||||
void service_rotation(){
|
||||
|
||||
|
||||
|
||||
#if defined(FEATURE_AZ_POSITION_INCREMENTAL_ENCODER) || defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER)
|
||||
service_rotation_lock = 1;
|
||||
#endif
|
||||
|
||||
static byte az_direction_change_flag = 0;
|
||||
static byte az_initial_slow_down_voltage = 0;
|
||||
|
||||
@ -6969,7 +6776,7 @@ void service_rotation(){
|
||||
debug_print("CW");
|
||||
#endif // DEBUG_SERVICE_ROTATION
|
||||
}
|
||||
//aaaaaa
|
||||
|
||||
if ((az_state_was == SLOW_START_CW) || (az_state_was == SLOW_START_CCW)){
|
||||
az_initial_slow_down_voltage = (AZ_INITIALLY_IN_SLOW_DOWN_PWM);
|
||||
update_az_variable_outputs(az_initial_slow_down_voltage);
|
||||
@ -7318,7 +7125,9 @@ control_port->println();*/
|
||||
|
||||
#endif // FEATURE_ELEVATION_CONTROL
|
||||
|
||||
|
||||
#if defined(FEATURE_AZ_POSITION_INCREMENTAL_ENCODER) || defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER)
|
||||
service_rotation_lock = 0;
|
||||
#endif
|
||||
|
||||
} /* service_rotation */
|
||||
// --------------------------------------------------------------
|
||||
@ -8698,7 +8507,7 @@ void initiate_park(){
|
||||
submit_request(EL, REQUEST_ELEVATION, PARK_ELEVATION, 8);
|
||||
park_initiated = 1;
|
||||
}
|
||||
#endif // FEATURE_ELEVATION
|
||||
#endif // FEATURE_ELEVATION_CONTROL
|
||||
|
||||
if (park_initiated) {
|
||||
park_status = PARK_INITIATED;
|
||||
@ -8891,11 +8700,20 @@ void az_position_incremental_encoder_interrupt_handler(){
|
||||
|
||||
}
|
||||
|
||||
if (!read_azimuth_lock){
|
||||
read_azimuth(1);
|
||||
if(!service_rotation_lock){
|
||||
service_rotation();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
} /* az_position_incremental_encoder_interrupt_handler */
|
||||
#endif // FEATURE_AZ_POSITION_INCREMENTAL_ENCODER
|
||||
// --------------------------------------------------------------
|
||||
|
||||
#ifdef FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
#if defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
void el_position_incremental_encoder_interrupt_handler(){
|
||||
|
||||
byte rotation_result = 0;
|
||||
@ -8990,8 +8808,16 @@ void el_position_incremental_encoder_interrupt_handler(){
|
||||
|
||||
}
|
||||
|
||||
if (!read_elevation_lock){
|
||||
read_elevation(1);
|
||||
if(!service_rotation_lock){
|
||||
service_rotation();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
} /* el_position_incremental_encoder_interrupt_handler */
|
||||
#endif // FEATURE_EL_POSITION_INCREMENTAL_ENCODER
|
||||
#endif // defined(FEATURE_EL_POSITION_INCREMENTAL_ENCODER) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
|
||||
// --------------------------------------------------------------
|
||||
|
||||
@ -11241,7 +11067,7 @@ void process_easycom_command(byte * easycom_command_buffer, int easycom_command_
|
||||
strcpy(return_string,"");
|
||||
|
||||
switch (easycom_command_buffer[0]) { // look at the first character of the command
|
||||
#if defined(OPTION_HAMLIB_EASYCOM_AZ_EL_COMMAND_HACK) && defined(FEATURE_ELEVATION_CONTROL) //zzzzzz
|
||||
#if defined(OPTION_HAMLIB_EASYCOM_AZ_EL_COMMAND_HACK) && defined(FEATURE_ELEVATION_CONTROL)
|
||||
case 'Z':
|
||||
//strcpy(return_string,"+");
|
||||
strcpy(return_string,"AZ");
|
||||
@ -11851,44 +11677,6 @@ void sync_master_clock_to_slave(){
|
||||
}
|
||||
#endif //defined(FEATURE_CLOCK) && defined(OPTION_SYNC_MASTER_CLOCK_TO_SLAVE)
|
||||
|
||||
//------------------------------------------------------
|
||||
#ifdef FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
void set_az_stepper_freq(byte pin, unsigned int frequency){
|
||||
|
||||
if (frequency > 31) {
|
||||
tone(pin, frequency);
|
||||
} else {
|
||||
if (frequency == 0) {
|
||||
noTone(pin);
|
||||
az_stepper_freq_pin = 0;
|
||||
} else {
|
||||
az_stepper_freq_pin = pin;
|
||||
az_stepper_freq = frequency;
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#endif //FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE
|
||||
//------------------------------------------------------
|
||||
#if defined(FEATURE_ELEVATION_CONTROL) && defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && defined(FEATURE_STEPPER_MOTOR)
|
||||
void set_el_stepper_freq(byte pin, unsigned int frequency){
|
||||
|
||||
if (frequency > 31) {
|
||||
tone(pin, frequency);
|
||||
} else {
|
||||
if (frequency == 0) {
|
||||
noTone(pin);
|
||||
el_stepper_freq_pin = 0;
|
||||
} else {
|
||||
el_stepper_freq_pin = pin;
|
||||
el_stepper_freq = frequency;
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#endif //defined(FEATURE_ELEVATION_CONTROL) && defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && defined(FEATURE_STEPPER_MOTOR)
|
||||
//------------------------------------------------------
|
||||
#if defined(FEATURE_STEPPER_MOTOR)
|
||||
void service_stepper_motor_pulse_pins(){
|
||||
@ -11953,7 +11741,7 @@ void set_az_stepper_freq(unsigned int frequency){
|
||||
debug_print("set_az_stepper_freq: ");
|
||||
debug_print_int(frequency);
|
||||
debug_print(" az_stepper_freq_count:");
|
||||
debug_print_int(el_stepper_freq_count);
|
||||
debug_print_int(az_stepper_freq_count);
|
||||
debug_println("");
|
||||
#endif //DEBUG_STEPPER
|
||||
|
||||
@ -11983,77 +11771,9 @@ void set_el_stepper_freq(unsigned int frequency){
|
||||
|
||||
#endif //defined(FEATURE_ELEVATION_CONTROL) && defined(FEATURE_STEPPER_MOTOR)
|
||||
|
||||
//------------------------------------------------------
|
||||
|
||||
/*
|
||||
|
||||
|
||||
#if defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && defined(FEATURE_STEPPER_MOTOR)
|
||||
void service_stepper_motor_pulse_pins(){
|
||||
|
||||
|
||||
static byte az_stepper_freq_pin_active = 0;
|
||||
static unsigned long az_stepper_freq_pin_next_transition = 0;
|
||||
static byte az_stepper_freq_pin_last_state = 0;
|
||||
|
||||
// pin just got activated
|
||||
if ((az_stepper_freq_pin) && (!az_stepper_freq_pin_active)){
|
||||
digitalWriteEnhanced(az_stepper_freq_pin,HIGH);
|
||||
az_stepper_freq_pin_last_state = HIGH;
|
||||
az_stepper_freq_pin_next_transition = millis() + ((1.0/az_stepper_freq)*500);
|
||||
az_stepper_freq_pin_active = 1;
|
||||
}
|
||||
|
||||
// pin got deactivated
|
||||
if ((az_stepper_freq_pin_active) && (!az_stepper_freq_pin)) {az_stepper_freq_pin_active = 0;}
|
||||
|
||||
// pin is active, are we ready for a transition?
|
||||
if ((az_stepper_freq_pin_active) && (millis() >= az_stepper_freq_pin_next_transition)){
|
||||
if (az_stepper_freq_pin_last_state == LOW){
|
||||
digitalWriteEnhanced(az_stepper_freq_pin,HIGH);
|
||||
az_stepper_freq_pin_last_state = HIGH;
|
||||
} else {
|
||||
digitalWriteEnhanced(az_stepper_freq_pin,LOW);
|
||||
az_stepper_freq_pin_last_state = LOW;
|
||||
}
|
||||
az_stepper_freq_pin_next_transition = millis() + ((1.0/az_stepper_freq)*500);
|
||||
}
|
||||
|
||||
|
||||
|
||||
#if defined(FEATURE_ELEVATION_CONTROL)
|
||||
static byte el_stepper_freq_pin_active = 0;
|
||||
static unsigned long el_stepper_freq_pin_next_transition = 0;
|
||||
static byte el_stepper_freq_pin_last_state = 0;
|
||||
|
||||
// pin just got activated
|
||||
if ((el_stepper_freq_pin) && (!el_stepper_freq_pin_active)){
|
||||
digitalWriteEnhanced(el_stepper_freq_pin,HIGH);
|
||||
el_stepper_freq_pin_last_state = HIGH;
|
||||
el_stepper_freq_pin_next_transition = millis() + ((1.0/el_stepper_freq)*500);
|
||||
el_stepper_freq_pin_active = 1;
|
||||
}
|
||||
|
||||
// pin got deactivated
|
||||
if ((el_stepper_freq_pin_active) && (!el_stepper_freq_pin)) {el_stepper_freq_pin_active = 0;}
|
||||
|
||||
// pin is active, are we ready for a transition?
|
||||
if ((el_stepper_freq_pin_active) && (millis() >= el_stepper_freq_pin_next_transition)){
|
||||
if (el_stepper_freq_pin_last_state == LOW){
|
||||
digitalWriteEnhanced(el_stepper_freq_pin,HIGH);
|
||||
el_stepper_freq_pin_last_state = HIGH;
|
||||
} else {
|
||||
digitalWriteEnhanced(el_stepper_freq_pin,LOW);
|
||||
el_stepper_freq_pin_last_state = LOW;
|
||||
}
|
||||
el_stepper_freq_pin_next_transition = millis() + ((1.0/el_stepper_freq)*500);
|
||||
}
|
||||
#endif //defined(FEATURE_ELEVATION_CONTROL)
|
||||
|
||||
}
|
||||
#endif //defined(FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE) && defined(FEATURE_STEPPER_MOTOR)
|
||||
|
||||
*/
|
||||
|
||||
//-------------------------------------------------------
|
||||
#ifdef FEATURE_ANALOG_OUTPUT_PINS
|
||||
|
||||
@ -6,7 +6,7 @@
|
||||
*/
|
||||
|
||||
/* main features */
|
||||
//#define FEATURE_ELEVATION_CONTROL // uncomment this for AZ/EL rotators
|
||||
#define FEATURE_ELEVATION_CONTROL // uncomment this for AZ/EL rotators
|
||||
#define FEATURE_YAESU_EMULATION // uncomment this for Yaesu GS-232 emulation on control port
|
||||
//#define FEATURE_EASYCOM_EMULATION // Easycom protocol emulation on control port (undefine FEATURE_YAESU_EMULATION above)
|
||||
|
||||
@ -17,7 +17,7 @@
|
||||
//#define FEATURE_RTC_DS1307
|
||||
//#define FEATURE_RTC_PCF8583
|
||||
//#define FEATURE_ETHERNET
|
||||
//#define FEATURE_STEPPER_MOTOR // requires this library: https://code.google.com/p/rogue-code/wiki/ToneLibraryDocumentation
|
||||
//#define FEATURE_STEPPER_MOTOR // requires Mega or an AVR with Timer 5 support
|
||||
//#define FEATURE_AUTOCORRECT
|
||||
|
||||
#define LANGUAGE_ENGLISH
|
||||
|
||||
@ -18,7 +18,7 @@
|
||||
//#define FEATURE_RTC_PCF8583
|
||||
//#define FEATURE_ETHERNET
|
||||
#define FEATURE_STEPPER_MOTOR // requires this library: https://code.google.com/p/rogue-code/wiki/ToneLibraryDocumentation
|
||||
#define FEATURE_AUTOCORRECT
|
||||
//#define FEATURE_AUTOCORRECT
|
||||
|
||||
#define LANGUAGE_ENGLISH
|
||||
//#define LANGUAGE_SPANISH
|
||||
@ -97,7 +97,7 @@
|
||||
#define FEATURE_ONE_DECIMAL_PLACE_HEADINGS
|
||||
//#define FEATURE_TWO_DECIMAL_PLACE_HEADINGS // under development - not working yet!
|
||||
//#define FEATURE_AZIMUTH_CORRECTION // correct the azimuth using a calibration table in rotator_settings.h
|
||||
#define FEATURE_ELEVATION_CORRECTION // correct the elevation using a calibration table in rotator_settings.h
|
||||
//#define FEATURE_ELEVATION_CORRECTION // correct the elevation using a calibration table in rotator_settings.h
|
||||
//#define FEATURE_ANCILLARY_PIN_CONTROL // control I/O pins with serial commands \F, \N, \P
|
||||
//#define FEATURE_JOYSTICK_CONTROL // analog joystick support
|
||||
//#define OPTION_JOYSTICK_REVERSE_X_AXIS
|
||||
@ -124,7 +124,7 @@
|
||||
//#define OPTION_DISABLE_HMC5883L_ERROR_CHECKING
|
||||
#define OPTION_HAMLIB_EASYCOM_AZ_EL_COMMAND_HACK
|
||||
//#define OPTION_HAMLIB_EASYCOM_NO_TERMINATOR_CHARACTER_HACK
|
||||
#define OPTION_NO_ELEVATION_CHECK_TARGET_DELAY
|
||||
//#define OPTION_NO_ELEVATION_CHECK_TARGET_DELAY
|
||||
|
||||
|
||||
|
||||
@ -194,7 +194,7 @@
|
||||
// #define DEBUG_HMC5883L
|
||||
// #define DEBUG_POLOLU_LSM303_CALIBRATION
|
||||
// #define DEBUG_STEPPER
|
||||
#define DEBUG_AUTOCORRECT
|
||||
// #define DEBUG_AUTOCORRECT
|
||||
|
||||
|
||||
|
||||
|
||||
@ -6,4 +6,4 @@
|
||||
|
||||
//#define HARDWARE_M0UPU
|
||||
//#define HARDWARE_EA4TX_ARS_USB // if using EA4TX ARS USB hardware, customize rotator_features_e4tx_ars_usb.h (not rotator_features.h)
|
||||
//#define HARDWARE_WB6KCN // customize rotator_features_wb6kcn.h, rotators_pins_wb6kcn.h, rotator_settings_wb6kcn.h
|
||||
#define HARDWARE_WB6KCN // customize rotator_features_wb6kcn.h, rotators_pins_wb6kcn.h, rotator_settings_wb6kcn.h
|
||||
@ -62,7 +62,7 @@ You can tweak these, but read the online documentation!
|
||||
|
||||
//Variable frequency output settings - LOWEST FREQUENCY IS 31 HERTZ DUE TO ARDUINO tone() FUNCTION LIMITATIONS!
|
||||
// (Except when used with FEATURE_STEPPER_MOTOR and FEATURE_STEPPER_MOTOR_EXPERIMENTAL_CODE)
|
||||
#define AZ_VARIABLE_FREQ_OUTPUT_LOW 32 // Frequency in hertz of minimum speed
|
||||
#define AZ_VARIABLE_FREQ_OUTPUT_LOW 5 //32 // Frequency in hertz of minimum speed
|
||||
#define AZ_VARIABLE_FREQ_OUTPUT_HIGH 1000 //100 // Frequency in hertz of maximum speed
|
||||
#define EL_VARIABLE_FREQ_OUTPUT_LOW 5 //32 // Frequency in hertz of minimum speed
|
||||
#define EL_VARIABLE_FREQ_OUTPUT_HIGH 500 // Frequency in hertz of maximum speed
|
||||
@ -127,6 +127,9 @@ You can tweak these, but read the online documentation!
|
||||
#define AZ_BRAKE_DELAY 3000 // in milliseconds
|
||||
#define EL_BRAKE_DELAY 3000 // in milliseconds
|
||||
|
||||
#define BRAKE_ACTIVE_STATE HIGH
|
||||
#define BRAKE_INACTIVE_STATE LOW
|
||||
|
||||
#define EEPROM_MAGIC_NUMBER 103
|
||||
#define EEPROM_WRITE_DIRTY_CONFIG_TIME 30 //time in seconds
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user