ExternalVendorCode/k3ng_rotator_controller
1
0
Fork 0
mirror of https://github.com/k3ng/k3ng_rotator_controller.git synced 2024-12-26 00:01:11 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

new file: LSM303.cpp

Browse Source 
new file:   LSM303.h
This commit is contained in:
Anthony Good 2014-12-02 23:04:48 -05:00
parent dca62e6692
commit d7f6cef6e1
2 changed files with 788 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

570
LSM303.cpp Normal file
View File

@ -0,0 +1,570 @@
#include <LSM303.h>
#include <Wire.h>
#include <math.h>
// Defines ////////////////////////////////////////////////////////////////
// The Arduino two-wire interface uses a 7-bit number for the address,
// and sets the last bit correctly based on reads and writes
#define D_SA0_HIGH_ADDRESS 0b0011101 // D with SA0 high
#define D_SA0_LOW_ADDRESS 0b0011110 // D with SA0 low or non-D magnetometer
#define NON_D_MAG_ADDRESS 0b0011110 // D with SA0 low or non-D magnetometer
#define NON_D_ACC_SA0_LOW_ADDRESS 0b0011000 // non-D accelerometer with SA0 low
#define NON_D_ACC_SA0_HIGH_ADDRESS 0b0011001 // non-D accelerometer with SA0 high
#define TEST_REG_NACK -1
#define D_WHO_ID 0x49
#define DLM_WHO_ID 0x3C
// Constructors ////////////////////////////////////////////////////////////////
LSM303::LSM303(void)
{
/*
These values lead to an assumed magnetometer bias of 0.
Use the Calibrate example program to determine appropriate values
for your particular unit. The Heading example demonstrates how to
adjust these values in your own sketch.
*/
m_min = (LSM303::vector<int16_t>){-32767, -32767, -32767};
m_max = (LSM303::vector<int16_t>){+32767, +32767, +32767};
_device = device_auto;
io_timeout = 0; // 0 = no timeout
did_timeout = false;
}
// Public Methods //////////////////////////////////////////////////////////////
// Did a timeout occur in readAcc(), readMag(), or read() since the last call to timeoutOccurred()?
bool LSM303::timeoutOccurred()
{
bool tmp = did_timeout;
did_timeout = false;
return tmp;
}
void LSM303::setTimeout(unsigned int timeout)
{
io_timeout = timeout;
}
unsigned int LSM303::getTimeout()
{
return io_timeout;
}
bool LSM303::init(deviceType device, sa0State sa0)
{
// determine device type if necessary
if (device == device_auto)
{
if (testReg(D_SA0_HIGH_ADDRESS, WHO_AM_I) == D_WHO_ID)
{
// device responds to address 0011101 with D ID; it's a D with SA0 high
device = device_D;
sa0 = sa0_high;
}
else if (testReg(D_SA0_LOW_ADDRESS, WHO_AM_I) == D_WHO_ID)
{
// device responds to address 0011110 with D ID; it's a D with SA0 low
device = device_D;
sa0 = sa0_low;
}
// Remaining possibilities: DLHC, DLM, or DLH. DLHC seems to respond to WHO_AM_I request the
// same way as DLM, even though this register isn't documented in its datasheet, so instead,
// guess if it's a DLHC based on acc address (Pololu boards pull SA0 low on DLM and DLH;
// DLHC doesn't have SA0 but uses same acc address as DLH/DLM with SA0 high).
else if (testReg(NON_D_ACC_SA0_HIGH_ADDRESS, CTRL_REG1_A) != TEST_REG_NACK)
{
// device responds to address 0011001; guess that it's a DLHC
device = device_DLHC;
sa0 = sa0_high;
}
// Remaining possibilities: DLM or DLH. Check acc with SA0 low address to make sure it's responsive
else if (testReg(NON_D_ACC_SA0_LOW_ADDRESS, CTRL_REG1_A) != TEST_REG_NACK)
{
// device responds to address 0011000 with DLM ID; guess that it's a DLM
sa0 = sa0_low;
// Now check WHO_AM_I_M
if (testReg(NON_D_MAG_ADDRESS, WHO_AM_I_M) == DLM_WHO_ID)
{
device = device_DLM;
}
else
{
device = device_DLH;
}
}
else
{
// device hasn't responded meaningfully, so give up
return false;
}
}
// determine SA0 if necessary
if (sa0 == sa0_auto)
{
if (device == device_D)
{
if (testReg(D_SA0_HIGH_ADDRESS, WHO_AM_I) == D_WHO_ID)
{
sa0 = sa0_high;
}
else if (testReg(D_SA0_LOW_ADDRESS, WHO_AM_I) == D_WHO_ID)
{
sa0 = sa0_low;
}
else
{
// no response on either possible address; give up
return false;
}
}
else if (device == device_DLM || device == device_DLH)
{
if (testReg(NON_D_ACC_SA0_HIGH_ADDRESS, CTRL_REG1_A) != TEST_REG_NACK)
{
sa0 = sa0_high;
}
else if (testReg(NON_D_ACC_SA0_LOW_ADDRESS, CTRL_REG1_A) != TEST_REG_NACK)
{
sa0 = sa0_low;
}
else
{
// no response on either possible address; give up
return false;
}
}
}
_device = device;
// set device addresses and translated register addresses
switch (device)
{
case device_D:
acc_address = mag_address = (sa0 == sa0_high) ? D_SA0_HIGH_ADDRESS : D_SA0_LOW_ADDRESS;
translated_regs[-OUT_X_L_M] = D_OUT_X_L_M;
translated_regs[-OUT_X_H_M] = D_OUT_X_H_M;
translated_regs[-OUT_Y_L_M] = D_OUT_Y_L_M;
translated_regs[-OUT_Y_H_M] = D_OUT_Y_H_M;
translated_regs[-OUT_Z_L_M] = D_OUT_Z_L_M;
translated_regs[-OUT_Z_H_M] = D_OUT_Z_H_M;
break;
case device_DLHC:
acc_address = NON_D_ACC_SA0_HIGH_ADDRESS; // DLHC doesn't have SA0 but uses same acc address as DLH/DLM with SA0 high
mag_address = NON_D_MAG_ADDRESS;
translated_regs[-OUT_X_H_M] = DLHC_OUT_X_H_M;
translated_regs[-OUT_X_L_M] = DLHC_OUT_X_L_M;
translated_regs[-OUT_Y_H_M] = DLHC_OUT_Y_H_M;
translated_regs[-OUT_Y_L_M] = DLHC_OUT_Y_L_M;
translated_regs[-OUT_Z_H_M] = DLHC_OUT_Z_H_M;
translated_regs[-OUT_Z_L_M] = DLHC_OUT_Z_L_M;
break;
case device_DLM:
acc_address = (sa0 == sa0_high) ? NON_D_ACC_SA0_HIGH_ADDRESS : NON_D_ACC_SA0_LOW_ADDRESS;
mag_address = NON_D_MAG_ADDRESS;
translated_regs[-OUT_X_H_M] = DLM_OUT_X_H_M;
translated_regs[-OUT_X_L_M] = DLM_OUT_X_L_M;
translated_regs[-OUT_Y_H_M] = DLM_OUT_Y_H_M;
translated_regs[-OUT_Y_L_M] = DLM_OUT_Y_L_M;
translated_regs[-OUT_Z_H_M] = DLM_OUT_Z_H_M;
translated_regs[-OUT_Z_L_M] = DLM_OUT_Z_L_M;
break;
case device_DLH:
acc_address = (sa0 == sa0_high) ? NON_D_ACC_SA0_HIGH_ADDRESS : NON_D_ACC_SA0_LOW_ADDRESS;
mag_address = NON_D_MAG_ADDRESS;
translated_regs[-OUT_X_H_M] = DLH_OUT_X_H_M;
translated_regs[-OUT_X_L_M] = DLH_OUT_X_L_M;
translated_regs[-OUT_Y_H_M] = DLH_OUT_Y_H_M;
translated_regs[-OUT_Y_L_M] = DLH_OUT_Y_L_M;
translated_regs[-OUT_Z_H_M] = DLH_OUT_Z_H_M;
translated_regs[-OUT_Z_L_M] = DLH_OUT_Z_L_M;
break;
}
return true;
}
/*
Enables the LSM303's accelerometer and magnetometer. Also:
- Sets sensor full scales (gain) to default power-on values, which are
+/- 2 g for accelerometer and +/- 1.3 gauss for magnetometer
(+/- 4 gauss on LSM303D).
- Selects 50 Hz ODR (output data rate) for accelerometer and 7.5 Hz
ODR for magnetometer (6.25 Hz on LSM303D). (These are the ODR
settings for which the electrical characteristics are specified in
the datasheets.)
- Enables high resolution modes (if available).
Note that this function will also reset other settings controlled by
the registers it writes to.
*/
void LSM303::enableDefault(void)
{
if (_device == device_D)
{
// Accelerometer
// 0x57 = 0b01010111
// AFS = 0 (+/- 2 g full scale)
writeReg(CTRL2, 0x00);
// 0x57 = 0b01010111
// AODR = 0101 (50 Hz ODR); AZEN = AYEN = AXEN = 1 (all axes enabled)
writeReg(CTRL1, 0x57);
// Magnetometer
// 0x64 = 0b01100100
// M_RES = 11 (high resolution mode); M_ODR = 001 (6.25 Hz ODR)
writeReg(CTRL5, 0x64);
// 0x20 = 0b00100000
// MFS = 01 (+/- 4 gauss full scale)
writeReg(CTRL6, 0x20);
// 0x00 = 0b00000000
// MLP = 0 (low power mode off); MD = 00 (continuous-conversion mode)
writeReg(CTRL7, 0x00);
}
else if (_device == device_DLHC)
{
// Accelerometer
// 0x08 = 0b00001000
// FS = 00 (+/- 2 g full scale); HR = 1 (high resolution enable)
writeAccReg(CTRL_REG4_A, 0x08);
// 0x47 = 0b01000111
// ODR = 0100 (50 Hz ODR); LPen = 0 (normal mode); Zen = Yen = Xen = 1 (all axes enabled)
writeAccReg(CTRL_REG1_A, 0x47);
// Magnetometer
// 0x0C = 0b00001100
// DO = 011 (7.5 Hz ODR)
writeMagReg(CRA_REG_M, 0x0C);
// 0x20 = 0b00100000
// GN = 001 (+/- 1.3 gauss full scale)
writeMagReg(CRB_REG_M, 0x20);
// 0x00 = 0b00000000
// MD = 00 (continuous-conversion mode)
writeMagReg(MR_REG_M, 0x00);
}
else // DLM, DLH
{
// Accelerometer
// 0x00 = 0b00000000
// FS = 00 (+/- 2 g full scale)
writeAccReg(CTRL_REG4_A, 0x00);
// 0x27 = 0b00100111
// PM = 001 (normal mode); DR = 00 (50 Hz ODR); Zen = Yen = Xen = 1 (all axes enabled)
writeAccReg(CTRL_REG1_A, 0x27);
// Magnetometer
// 0x0C = 0b00001100
// DO = 011 (7.5 Hz ODR)
writeMagReg(CRA_REG_M, 0x0C);
// 0x20 = 0b00100000
// GN = 001 (+/- 1.3 gauss full scale)
writeMagReg(CRB_REG_M, 0x20);
// 0x00 = 0b00000000
// MD = 00 (continuous-conversion mode)
writeMagReg(MR_REG_M, 0x00);
}
}
// Writes an accelerometer register
void LSM303::writeAccReg(regAddr reg, byte value)
{
Wire.beginTransmission(acc_address);
Wire.write((byte)reg);
Wire.write(value);
last_status = Wire.endTransmission();
}
// Reads an accelerometer register
byte LSM303::readAccReg(regAddr reg)
{
byte value;
Wire.beginTransmission(acc_address);
Wire.write((byte)reg);
last_status = Wire.endTransmission();
Wire.requestFrom(acc_address, (byte)1);
value = Wire.read();
Wire.endTransmission();
return value;
}
// Writes a magnetometer register
void LSM303::writeMagReg(regAddr reg, byte value)
{
Wire.beginTransmission(mag_address);
Wire.write((byte)reg);
Wire.write(value);
last_status = Wire.endTransmission();
}
// Reads a magnetometer register
byte LSM303::readMagReg(regAddr reg)
{
byte value;
// if dummy register address (magnetometer Y/Z), look up actual translated address (based on device type)
if (reg < 0)
{
reg = translated_regs[-reg];
}
Wire.beginTransmission(mag_address);
Wire.write((byte)reg);
last_status = Wire.endTransmission();
Wire.requestFrom(mag_address, (byte)1);
value = Wire.read();
Wire.endTransmission();
return value;
}
void LSM303::writeReg(regAddr reg, byte value)
{
// mag address == acc_address for LSM303D, so it doesn't really matter which one we use.
// Use writeMagReg so it can translate OUT_[XYZ]_[HL]_M
if (_device == device_D || reg < CTRL_REG1_A)
{
writeMagReg(reg, value);
}
else
{
writeAccReg(reg, value);
}
}
// Note that this function will not work for reading TEMP_OUT_H_M and TEMP_OUT_L_M on the DLHC.
// To read those two registers, use readMagReg() instead.
byte LSM303::readReg(regAddr reg)
{
// mag address == acc_address for LSM303D, so it doesn't really matter which one we use.
// Use writeMagReg so it can translate OUT_[XYZ]_[HL]_M
if (_device == device_D || reg < CTRL_REG1_A)
{
return readMagReg(reg);
}
else
{
return readAccReg(reg);
}
}
// Reads the 3 accelerometer channels and stores them in vector a
void LSM303::readAcc(void)
{
Wire.beginTransmission(acc_address);
// assert the MSB of the address to get the accelerometer
// to do slave-transmit subaddress updating.
Wire.write(OUT_X_L_A | (1 << 7));
last_status = Wire.endTransmission();
Wire.requestFrom(acc_address, (byte)6);
unsigned int millis_start = millis();
while (Wire.available() < 6) {
if (io_timeout > 0 && ((unsigned int)millis() - millis_start) > io_timeout)
{
did_timeout = true;
return;
}
}
byte xla = Wire.read();
byte xha = Wire.read();
byte yla = Wire.read();
byte yha = Wire.read();
byte zla = Wire.read();
byte zha = Wire.read();
// combine high and low bytes
// This no longer drops the lowest 4 bits of the readings from the DLH/DLM/DLHC, which are always 0
// (12-bit resolution, left-aligned). The D has 16-bit resolution
a.x = (int16_t)(xha << 8 | xla);
a.y = (int16_t)(yha << 8 | yla);
a.z = (int16_t)(zha << 8 | zla);
}
// Reads the 3 magnetometer channels and stores them in vector m
void LSM303::readMag(void)
{
Wire.beginTransmission(mag_address);
// If LSM303D, assert MSB to enable subaddress updating
// OUT_X_L_M comes first on D, OUT_X_H_M on others
Wire.write((_device == device_D) ? translated_regs[-OUT_X_L_M] | (1 << 7) : translated_regs[-OUT_X_H_M]);
last_status = Wire.endTransmission();
Wire.requestFrom(mag_address, (byte)6);
unsigned int millis_start = millis();
while (Wire.available() < 6) {
if (io_timeout > 0 && ((unsigned int)millis() - millis_start) > io_timeout)
{
did_timeout = true;
return;
}
}
byte xlm, xhm, ylm, yhm, zlm, zhm;
if (_device == device_D)
{
/// D: X_L, X_H, Y_L, Y_H, Z_L, Z_H
xlm = Wire.read();
xhm = Wire.read();
ylm = Wire.read();
yhm = Wire.read();
zlm = Wire.read();
zhm = Wire.read();
}
else
{
// DLHC, DLM, DLH: X_H, X_L...
xhm = Wire.read();
xlm = Wire.read();
if (_device == device_DLH)
{
// DLH: ...Y_H, Y_L, Z_H, Z_L
yhm = Wire.read();
ylm = Wire.read();
zhm = Wire.read();
zlm = Wire.read();
}
else
{
// DLM, DLHC: ...Z_H, Z_L, Y_H, Y_L
zhm = Wire.read();
zlm = Wire.read();
yhm = Wire.read();
ylm = Wire.read();
}
}
// combine high and low bytes
m.x = (int16_t)(xhm << 8 | xlm);
m.y = (int16_t)(yhm << 8 | ylm);
m.z = (int16_t)(zhm << 8 | zlm);
}
// Reads all 6 channels of the LSM303 and stores them in the object variables
void LSM303::read(void)
{
readAcc();
readMag();
}
/*
Returns the angular difference in the horizontal plane between a
default vector and north, in degrees.
The default vector here is chosen to point along the surface of the
PCB, in the direction of the top of the text on the silkscreen.
This is the +X axis on the Pololu LSM303D carrier and the -Y axis on
the Pololu LSM303DLHC, LSM303DLM, and LSM303DLH carriers.
*/
float LSM303::heading(void)
{
if (_device == device_D)
{
return heading((vector<int>){1, 0, 0});
}
else
{
return heading((vector<int>){0, -1, 0});
}
}
/*
Returns the angular difference in the horizontal plane between the
"from" vector and north, in degrees.
Description of heading algorithm:
Shift and scale the magnetic reading based on calibration data to find
the North vector. Use the acceleration readings to determine the Up
vector (gravity is measured as an upward acceleration). The cross
product of North and Up vectors is East. The vectors East and North
form a basis for the horizontal plane. The From vector is projected
into the horizontal plane and the angle between the projected vector
and horizontal north is returned.
*/
template <typename T> float LSM303::heading(vector<T> from)
{
vector<int32_t> temp_m = {m.x, m.y, m.z};
// subtract offset (average of min and max) from magnetometer readings
temp_m.x -= ((int32_t)m_min.x + m_max.x) / 2;
temp_m.y -= ((int32_t)m_min.y + m_max.y) / 2;
temp_m.z -= ((int32_t)m_min.z + m_max.z) / 2;
// compute E and N
vector<float> E;
vector<float> N;
vector_cross(&temp_m, &a, &E);
vector_normalize(&E);
vector_cross(&a, &E, &N);
vector_normalize(&N);
// compute heading
float heading = atan2(vector_dot(&E, &from), vector_dot(&N, &from)) * 180 / M_PI;
if (heading < 0) heading += 360;
return heading;
}
template <typename Ta, typename Tb, typename To> void LSM303::vector_cross(const vector<Ta> *a,const vector<Tb> *b, vector<To> *out)
{
out->x = (a->y * b->z) - (a->z * b->y);
out->y = (a->z * b->x) - (a->x * b->z);
out->z = (a->x * b->y) - (a->y * b->x);
}
template <typename Ta, typename Tb> float LSM303::vector_dot(const vector<Ta> *a, const vector<Tb> *b)
{
return (a->x * b->x) + (a->y * b->y) + (a->z * b->z);
}
void LSM303::vector_normalize(vector<float> *a)
{
float mag = sqrt(vector_dot(a, a));
a->x /= mag;
a->y /= mag;
a->z /= mag;
}
// Private Methods //////////////////////////////////////////////////////////////
int LSM303::testReg(byte address, regAddr reg)
{
Wire.beginTransmission(address);
Wire.write((byte)reg);
last_status = Wire.endTransmission();
Wire.requestFrom(address, (byte)1);
if (Wire.available())
return Wire.read();
else
return TEST_REG_NACK;
}

218
LSM303.h Normal file
View File

@ -0,0 +1,218 @@
#ifndef LSM303_h
#define LSM303_h
#include <Arduino.h> // for byte data type
class LSM303
{
public:
template <typename T> struct vector
{
T x, y, z;
};
enum deviceType { device_DLH, device_DLM, device_DLHC, device_D, device_auto };
enum sa0State { sa0_low, sa0_high, sa0_auto };
// register addresses
enum regAddr
{
TEMP_OUT_L = 0x05, // D
TEMP_OUT_H = 0x06, // D
STATUS_M = 0x07, // D
INT_CTRL_M = 0x12, // D
INT_SRC_M = 0x13, // D
INT_THS_L_M = 0x14, // D
INT_THS_H_M = 0x15, // D
OFFSET_X_L_M = 0x16, // D
OFFSET_X_H_M = 0x17, // D
OFFSET_Y_L_M = 0x18, // D
OFFSET_Y_H_M = 0x19, // D
OFFSET_Z_L_M = 0x1A, // D
OFFSET_Z_H_M = 0x1B, // D
REFERENCE_X = 0x1C, // D
REFERENCE_Y = 0x1D, // D
REFERENCE_Z = 0x1E, // D
CTRL0 = 0x1F, // D
CTRL1 = 0x20, // D
CTRL_REG1_A = 0x20, // DLH, DLM, DLHC
CTRL2 = 0x21, // D
CTRL_REG2_A = 0x21, // DLH, DLM, DLHC
CTRL3 = 0x22, // D
CTRL_REG3_A = 0x22, // DLH, DLM, DLHC
CTRL4 = 0x23, // D
CTRL_REG4_A = 0x23, // DLH, DLM, DLHC
CTRL5 = 0x24, // D
CTRL_REG5_A = 0x24, // DLH, DLM, DLHC
CTRL6 = 0x25, // D
CTRL_REG6_A = 0x25, // DLHC
HP_FILTER_RESET_A = 0x25, // DLH, DLM
CTRL7 = 0x26, // D
REFERENCE_A = 0x26, // DLH, DLM, DLHC
STATUS_A = 0x27, // D
STATUS_REG_A = 0x27, // DLH, DLM, DLHC
OUT_X_L_A = 0x28,
OUT_X_H_A = 0x29,
OUT_Y_L_A = 0x2A,
OUT_Y_H_A = 0x2B,
OUT_Z_L_A = 0x2C,
OUT_Z_H_A = 0x2D,
FIFO_CTRL = 0x2E, // D
FIFO_CTRL_REG_A = 0x2E, // DLHC
FIFO_SRC = 0x2F, // D
FIFO_SRC_REG_A = 0x2F, // DLHC
IG_CFG1 = 0x30, // D
INT1_CFG_A = 0x30, // DLH, DLM, DLHC
IG_SRC1 = 0x31, // D
INT1_SRC_A = 0x31, // DLH, DLM, DLHC
IG_THS1 = 0x32, // D
INT1_THS_A = 0x32, // DLH, DLM, DLHC
IG_DUR1 = 0x33, // D
INT1_DURATION_A = 0x33, // DLH, DLM, DLHC
IG_CFG2 = 0x34, // D
INT2_CFG_A = 0x34, // DLH, DLM, DLHC
IG_SRC2 = 0x35, // D
INT2_SRC_A = 0x35, // DLH, DLM, DLHC
IG_THS2 = 0x36, // D
INT2_THS_A = 0x36, // DLH, DLM, DLHC
IG_DUR2 = 0x37, // D
INT2_DURATION_A = 0x37, // DLH, DLM, DLHC
CLICK_CFG = 0x38, // D
CLICK_CFG_A = 0x38, // DLHC
CLICK_SRC = 0x39, // D
CLICK_SRC_A = 0x39, // DLHC
CLICK_THS = 0x3A, // D
CLICK_THS_A = 0x3A, // DLHC
TIME_LIMIT = 0x3B, // D
TIME_LIMIT_A = 0x3B, // DLHC
TIME_LATENCY = 0x3C, // D
TIME_LATENCY_A = 0x3C, // DLHC
TIME_WINDOW = 0x3D, // D
TIME_WINDOW_A = 0x3D, // DLHC
Act_THS = 0x3E, // D
Act_DUR = 0x3F, // D
CRA_REG_M = 0x00, // DLH, DLM, DLHC
CRB_REG_M = 0x01, // DLH, DLM, DLHC
MR_REG_M = 0x02, // DLH, DLM, DLHC
SR_REG_M = 0x09, // DLH, DLM, DLHC
IRA_REG_M = 0x0A, // DLH, DLM, DLHC
IRB_REG_M = 0x0B, // DLH, DLM, DLHC
IRC_REG_M = 0x0C, // DLH, DLM, DLHC
WHO_AM_I_M = 0x0F, // DLM
WHO_AM_I = 0x0F, // D
TEMP_OUT_H_M = 0x31, // DLHC
TEMP_OUT_L_M = 0x32, // DLHC
// dummy addresses for registers in different locations on different devices;
// the library translates these based on device type
// value with sign flipped is used as index into translated_regs array
OUT_X_H_M = -1,
OUT_X_L_M = -2,
OUT_Y_H_M = -3,
OUT_Y_L_M = -4,
OUT_Z_H_M = -5,
OUT_Z_L_M = -6,
// update dummy_reg_count if registers are added here!
// device-specific register addresses
DLH_OUT_X_H_M = 0x03,
DLH_OUT_X_L_M = 0x04,
DLH_OUT_Y_H_M = 0x05,
DLH_OUT_Y_L_M = 0x06,
DLH_OUT_Z_H_M = 0x07,
DLH_OUT_Z_L_M = 0x08,
DLM_OUT_X_H_M = 0x03,
DLM_OUT_X_L_M = 0x04,
DLM_OUT_Z_H_M = 0x05,
DLM_OUT_Z_L_M = 0x06,
DLM_OUT_Y_H_M = 0x07,
DLM_OUT_Y_L_M = 0x08,
DLHC_OUT_X_H_M = 0x03,
DLHC_OUT_X_L_M = 0x04,
DLHC_OUT_Z_H_M = 0x05,
DLHC_OUT_Z_L_M = 0x06,
DLHC_OUT_Y_H_M = 0x07,
DLHC_OUT_Y_L_M = 0x08,
D_OUT_X_L_M = 0x08,
D_OUT_X_H_M = 0x09,
D_OUT_Y_L_M = 0x0A,
D_OUT_Y_H_M = 0x0B,
D_OUT_Z_L_M = 0x0C,
D_OUT_Z_H_M = 0x0D
};
vector<int16_t> a; // accelerometer readings
vector<int16_t> m; // magnetometer readings
vector<int16_t> m_max; // maximum magnetometer values, used for calibration
vector<int16_t> m_min; // minimum magnetometer values, used for calibration
byte last_status; // status of last I2C transmission
LSM303(void);
bool init(deviceType device = device_auto, sa0State sa0 = sa0_auto);
byte getDeviceType(void) { return _device; }
void enableDefault(void);
void writeAccReg(regAddr reg, byte value);
byte readAccReg(regAddr reg);
void writeMagReg(regAddr reg, byte value);
byte readMagReg(regAddr reg);
void writeReg(regAddr reg, byte value);
byte readReg(regAddr reg);
void readAcc(void);
void readMag(void);
void read(void);
void setTimeout(unsigned int timeout);
unsigned int getTimeout(void);
bool timeoutOccurred(void);
float heading(void);
template <typename T> float heading(vector<T> from);
// vector functions
template <typename Ta, typename Tb, typename To> static void vector_cross(const vector<Ta> *a, const vector<Tb> *b, vector<To> *out);
template <typename Ta, typename Tb> static float vector_dot(const vector<Ta> *a,const vector<Tb> *b);
static void vector_normalize(vector<float> *a);
private:
deviceType _device; // chip type (DLH, DLM, or DLHC)
byte acc_address;
byte mag_address;
static const int dummy_reg_count = 6;
regAddr translated_regs[dummy_reg_count + 1]; // index 0 not used
unsigned int io_timeout;
bool did_timeout;
int testReg(byte address, regAddr reg);
};
#endif