heads/unmaintained_boards/UNMAINTAINED_qemu-linuxboot/UNMAINTAINED_qemu-linuxboot.config
Thierry Laurion 9b101f1454 flash.sh: FLASHROM_OPTIONS->FLASH_OPTIONS: require FLASH_OPTIONS to specify flash program in board configs
- boards: switch flashrom->flashprog, FLASH_OPTIONS: flashprog memory --progress --programmer internal

TODO: check, Might break:
- xx20 : x220/t420/t520: used hwseq: verify compat
- legacy : not sure --ifd bios are support: verify compat (and drop, future PR drop legacy boards anyway...)
- talos: linux_mtd is used: verify compat

Tested:
- x230 works with awesome progress bar on read, erase and write.

Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-29 08:58:09 -04:00

57 lines
1.2 KiB
Makefile

# Configuration for emulating LinuxBoot+Heads with qemu
#
export CONFIG_LINUXBOOT=y
export CONFIG_LINUX_VERSION=4.14.62
CONFIG_LINUXBOOT_BOARD=qemu
CONFIG_LINUX_CONFIG=config/linux-linuxboot.config
ifeq "$(CONFIG_UROOT)" "y"
CONFIG_BUSYBOX=n
else
CONFIG_CRYPTSETUP=y
CONFIG_LVM2=y
CONFIG_MBEDTLS=y
CONFIG_PCIUTILS=y
CONFIG_POPT=y
CONFIG_QRENCODE=y
CONFIG_TPMTOTP=y
endif
CONFIG_FLASHPROG=y
CONFIG_FLASHTOOLS=y
CONFIG_GPG2=y
CONFIG_KEXEC=y
CONFIG_UTIL_LINUX=y
CONFIG_DROPBEAR=y
#CONFIG_FROTZ=y
CONFIG_LINUX_USB=y
CONFIG_LINUX_E1000=y
CONFIG_LINUX_SCSI_GDTH=y
CONFIG_LINUX_ATA=y
CONFIG_LINUX_AHCI=y
export CONFIG_BOOTSCRIPT=/bin/generic-init
export CONFIG_BOOTSCRIPT_NETWORK=/bin/network-init-recovery
export CONFIG_BOOT_REQ_HASH=n
export CONFIG_BOOT_REQ_ROLLBACK=n
export CONFIG_BOOT_STATIC_IP=10.0.2.15
# You can ssh into the qemu instance by running
# ssh -p 5555 root@localhost
# The LinuxBoot firmware should set its ip address to 10.0.2.15
# or run udhcpc to get a qemu address
run:
qemu-system-x86_64 \
-machine q35,smm=on \
-global ICH9-LPC.disable_s3=1 \
-global driver=cfi.pflash01,property=secure,value=on \
-redir tcp:5555::22 \
--serial $(or $(SERIAL),/dev/tty) \
-drive if=pflash,format=raw,unit=0,file=$(board_build)/linuxboot.rom
stty sane