ExternalVendorCode/heads
1
0
Fork 0
mirror of https://github.com/linuxboot/heads.git synced 2024-12-24 07:06:42 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
a29f92a26d
heads/modules/linux
Thierry Laurion 7cbcdd8ed7
Tethering refresh for CDC NCM/CDC EEM mobile phones (tested on GrapheneOS Pixel 6a, no more RNDIS support) 
- Add additional requirements to linux config
- Add additional CONFIG_MOBILE_TETHERING=y to all maximized board configs
- Fix issue under network-recovery-init to NTP sync against NTP server pool
- Extend network-recovery-init to first try NTP sync against DNS server returned by DHCP answer
- Remove network-recovery-init earlytty and tty0 redirection (console should be setuped properly by init in all cases)
- If CONFIG_MOBILE_TETHERING=y added to board config and network-recovery-init called, wait to user input on instructions and warning 30 secs before proceeding (non-blocking)
- Machines having STATIC_IP under board config won't benefit of autoatic NTP sync

Since network-recovery-init can only be called from recovery shell now, and recovery shell can be guarded by GPG auth, this is PoC code to be used to complement TOTP being out of sync

TODO(Future PR):
- Refactor into functions and reuse into TOTP/HOTP being out of sync automatically.

Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-02-21 13:50:18 -05:00

315 lines
12 KiB
Makefile
Raw Blame History

modules-y += linux
ifeq "$(CONFIG_TARGET_ARCH)" "x86"
LINUX_ARCH := x86
LINUX_IMAGE_FILE := bzImage
else ifeq "$(CONFIG_TARGET_ARCH)" "ppc64"
LINUX_ARCH := powerpc
LINUX_IMAGE_FILE := zImage
else
$(error "$(CONFIG_TARGET_ARCH) target isn't supported by this module")
endif
ifeq "$(CONFIG_LINUX_VERSION)" "4.14.62"
linux_version := 4.14.62
linux_hash := 51ca4d7e8ee156dc0f19bc7768915cfae41dbb0b4f251e4fa8b178c5674c22ab
else ifeq "$(CONFIG_LINUX_VERSION)" "4.19.139"
linux_version := 4.19.139
linux_hash := 9c4ebf21fe949f80fbcfbbd6e7fe181040d325e89475e230ab53ef01f9d55605
else ifeq "$(CONFIG_LINUX_VERSION)" "5.4.69"
linux_version := 5.4.69
linux_hash := a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7
else ifeq "$(CONFIG_LINUX_VERSION)" "5.5-openpower"
linux_version := 5.5
linux_patch_version := 5.5-openpower
linux_hash := a6fbd4ee903c128367892c2393ee0d9657b6ed3ea90016d4dc6f1f6da20b2330
#
# linuxboot systems should *NOT* use 5.10.5 until a proper review has
# been done. This is because `0000-efi_bds.patch` did not cleanly port
# from 5.4.69 to 5.10.5 which directly affects linuxboot systems.
#
else ifeq "$(CONFIG_LINUX_VERSION)" "5.10.5"
linux_version := 5.10.5
linux_hash := 3991a9e16a187d78d5f414d89236ae5d7f404a69e60c4c42a9d262ee19612ef4
else ifeq "$(CONFIG_LINUX_VERSION)" "6.1.8"
linux_version := 6.1.8
linux_hash := b60bb53ab8ba370a270454b11e93d41af29126fc72bd6ede517673e2e57b816d
else
$(error "$(BOARD): does not specify linux kernel version under CONFIG_LINUX_VERSION")
endif
linux_base_dir := linux-$(linux_version)
# TODO: fixup the patch process
# input file in the heads config/ dir
# Allow board config to specialize Linux configuration if necessary
linux_kconfig := $(or $(CONFIG_LINUX_CONFIG),config/linux.config)
# Output directory for the Linux kernel build is based on the
# configuration file name, not the board name
linux_dir := $(linux_base_dir)/$(notdir $(basename $(linux_kconfig)))
linux_tar := linux-$(linux_version).tar.xz
linux_major_ver := $(basename $(basename $(CONFIG_LINUX_VERSION)))
linux_url := https://cdn.kernel.org/pub/linux/kernel/v$(linux_major_ver).x/$(linux_tar)
# Ensure that touching the config file will force a reconfig/rebuild
$(build)/$(linux_dir)/.configured: $(linux_kconfig)
linux_configure := \
mkdir -p "$(build)/$(linux_dir)" \
&& $(call install_config,$(pwd)/$(linux_kconfig),$(build)/$(linux_dir)/.config) \
&& $(MAKE) -C .. \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
O="$(build)/$(linux_dir)" \
olddefconfig \
linux_output += arch/$(LINUX_ARCH)/boot/$(LINUX_IMAGE_FILE)
# Once we have extracted the kernel tar file, install the headers
# so that other submodules can make use of them.
$(INSTALL)/include/linux/limits.h: $(build)/$(linux_base_dir)/.canary
$(MAKE) \
-C "$(build)/$(linux_base_dir)" \
ARCH="$(LINUX_ARCH)" \
INSTALL_HDR_PATH="$(INSTALL)" \
CROSS_COMPILE="$(CROSS)" \
O="$(linux_dir)" \
KCONFIG_CONFIG="$(pwd)/$(linux_kconfig)" \
headers_install
# qemu
linux_modules-$(CONFIG_LINUX_E1000) += drivers/net/ethernet/intel/e1000/e1000.ko
# x230 and winterfell
linux_modules-$(CONFIG_LINUX_E1000E) += drivers/net/ethernet/intel/e1000e/e1000e.ko
# Dell R630 ethernet and RAID controller
linux_modules-$(CONFIG_LINUX_IGB) += drivers/net/ethernet/intel/igb/igb.ko
linux_modules-$(CONFIG_LINUX_MEGARAID) += drivers/scsi/megaraid/megaraid_mm.ko
linux_modules-$(CONFIG_LINUX_MEGARAID) += drivers/scsi/megaraid/megaraid_sas.ko
linux_modules-$(CONFIG_LINUX_MEGARAID) += drivers/scsi/megaraid/megaraid_mbox.ko
# Intel s2600wf scsi controller
linux_modules-$(CONFIG_LINUX_SCSI_GDTH) += drivers/scsi/gdth.ko
linux_modules-$(CONFIG_LINUX_ATA) += drivers/ata/libata.ko
linux_modules-$(CONFIG_LINUX_AHCI) += drivers/ata/ahci.ko
#linux_modules-$(CONFIG_LINUX_AHCI) += drivers/ata/ahci_platform.ko
linux_modules-$(CONFIG_LINUX_AHCI) += drivers/ata/libahci.ko
#linux_modules-$(CONFIG_LINUX_AHCI) += drivers/ata/libahci_platform.ko
# Solarflare network card
linux_modules-$(CONFIG_LINUX_SFC) += drivers/net/ethernet/sfc/sfc.ko
linux_modules-$(CONFIG_LINUX_SFC) += drivers/net/mdio.ko
# Mellanox ConnectX-3 (winterfell)
linux_modules-$(CONFIG_LINUX_MLX4) += drivers/net/ethernet/mellanox/mlx4/mlx4_core.ko
linux_modules-$(CONFIG_LINUX_MLX4) += drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko
# Broadcom 57302 (25g) for Tioga Pass
linux_modules-$(CONFIG_LINUX_BCM) += drivers/net/ethernet/broadcom/bnxt/bnxt_en.ko
# USB modules for both types of controllers
# older boards also need ohci and uhci
linux_modules-$(CONFIG_LINUX_USB_COMPANION_CONTROLLER) += drivers/usb/host/uhci-hcd.ko
linux_modules-$(CONFIG_LINUX_USB_COMPANION_CONTROLLER) += drivers/usb/host/ohci-hcd.ko
linux_modules-$(CONFIG_LINUX_USB_COMPANION_CONTROLLER) += drivers/usb/host/ohci-pci.ko
linux_modules-$(CONFIG_LINUX_USB) += drivers/usb/host/ehci-hcd.ko
linux_modules-$(CONFIG_LINUX_USB) += drivers/usb/host/ehci-pci.ko
linux_modules-$(CONFIG_LINUX_USB) += drivers/usb/host/xhci-hcd.ko
linux_modules-$(CONFIG_LINUX_USB) += drivers/usb/host/xhci-pci.ko
linux_modules-$(CONFIG_LINUX_USB) += drivers/usb/storage/usb-storage.ko
#USB modules when a USB keyboard is defined in board config
linux_modules-$(CONFIG_SUPPORT_USB_KEYBOARD) += drivers/hid/usbhid/usbhid.ko
#USB modules for Mobile USB Tethering (Most Android phones, Librem phone, etc)
linux_modules-$(CONFIG_MOBILE_TETHERING) += drivers/net/mii.ko
linux_modules-$(CONFIG_MOBILE_TETHERING) += drivers/net/usb/usbnet.ko
linux_modules-$(CONFIG_MOBILE_TETHERING) += drivers/net/usb/cdc_ether.ko
linux_modules-$(CONFIG_MOBILE_TETHERING) += drivers/net/usb/cdc_ncm.ko
linux_modules-$(CONFIG_MOBILE_TETHERING) += drivers/net/usb/cdc_eem.ko
# NVMe driver for winterfell and other servers
linux_modules-$(CONFIG_LINUX_NVME) += drivers/nvme/host/nvme.ko
linux_modules-$(CONFIG_LINUX_NVME) += drivers/nvme/host/nvme-core.ko
# ME drivers for talking the the management engine
linux_modules-$(CONFIG_LINUX_MEI) += drivers/misc/mei/mei.ko
linux_modules-$(CONFIG_LINUX_MEI) += drivers/misc/mei/mei-me.ko
EXTRA_FLAGS := -fdebug-prefix-map=$(pwd)=heads -gno-record-gcc-switches
ifeq "$(CONFIG_LINUX_VERSION)" "4.14.62"
EXTRA_FLAGS += -Wno-cast-function-type
endif
linux_target := \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
AFLAGS_KERNEL="$(EXTRA_FLAGS)" \
CFLAGS_KERNEL="$(EXTRA_FLAGS)" \
CFLAGS_MODULE="$(EXTRA_FLAGS)" \
KBUILD_BUILD_USER=$(notdir $(linux_kconfig)) \
KBUILD_BUILD_HOST=linuxboot \
KBUILD_BUILD_TIMESTAMP="1970-00-00" \
KBUILD_BUILD_VERSION=0 \
$(MAKE_JOBS) \
# We cross compile linux now
linux_depends := musl-cross
#
# Linux kernel module installation
#
# This is special cases since we have to do a special strip operation on
# the kernel modules to make them fit into the ROM image.
#
module_initrd_dir := $(shell mktemp -d)
module_initrd_lib_dir := $(module_initrd_dir)/lib/modules
FOO := $(shell mkdir -p "$(module_initrd_lib_dir)")
define linux_module =
# Each module depends on building the Linux kernel
$(build)/$(linux_dir)/$1: $(build)/$(linux_dir)/$(linux_output)
# The cpio file will depend on every module
$(build)/$(BOARD)/modules.cpio: $(module_initrd_lib_dir)/$(notdir $1)
# Strip the modules when we install them so that they will be extra small
$(module_initrd_lib_dir)/$(notdir $1): $(build)/$(linux_dir)/$1
$(call do,INSTALL-MODULE,$1, \
$(CROSS)strip \
--preserve-dates \
--strip-debug \
-o "$$@" \
"$$<" \
)
endef
$(call map,linux_module,$(linux_modules-y))
# We can't rebuild the module initrd until the kernel has been rebuilt
$(build)/$(BOARD)/modules.cpio: $(build)/$(linux_dir)/.build
$(call do-cpio,$@,$(module_initrd_dir))
@$(RM) -rf "$(module_initrd_dir)"
# The output of the linux.intermediate is usually the bzImage in the
# linux build directory. We need to copy it into our board
# specific directory for ease of locating it later.
$(build)/$(BOARD)/$(LINUX_IMAGE_FILE): $(build)/$(linux_dir)/.build
$(call do-copy,$(dir $<)/$(linux_output),$@)
@touch $@ # force a timestamp update
@sha256sum "$@" | tee -a "$(HASHES)"
@stat -c "%8s:%n" "$@" | tee -a "$(SIZES)"
# Build kernel second time, now that initrd is built.
$(build)/$(BOARD)/$(LINUX_IMAGE_FILE).bundled: \
$(build)/$(initrd_dir)/initrd.cpio.xz \
$(build)/$(BOARD)/$(LINUX_IMAGE_FILE)
xz --decompress --stdout --force "$<" > $(build)/$(initrd_dir)/initrd.cpio
$(MAKE) -C "$(build)/$(linux_dir)" $(linux_target)
$(call do-copy,$(build)/$(linux_dir)/$(linux_output),$@)
@touch $@ # force a timestamp update
@sha256sum "$@" | tee -a "$(HASHES)"
# modify_and_save_defconfig_in_place target allows us edit current in tree config
# under linux decompressed+patched directory through menuconfig
# and put it back in git tree to check changes with git difftool iteratively
linux.modify_and_save_defconfig_in_place:
cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" && \
$(MAKE) \
-C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
menuconfig && \
$(MAKE) \
-C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
savedefconfig \
&& mv "$(build)/$(linux_dir)/defconfig" "$(pwd)/$(linux_kconfig)"
# modify_and_save_oldconfig_in_place target allows us edit current in tree config
# under linux decompressed+patched directory through menuconfig
# and put it back in git tree to check changes with git difftool iteratively
linux.modify_and_save_oldconfig_in_place:
mkdir -p "$(build)/$(linux_dir)" \
&& cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
menuconfig \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
olddefconfig \
&& mv "$(build)/$(linux_dir)/.config" "$(pwd)/$(linux_kconfig)"
#Add some tooling to permit us to keep track of what we currently use.
# save_in_defconfig_format_in_place: regenerate a defconfig from current board linux config and overwrites it
# save_in_versioned_defconfig_format: same as avove but doesn't overwrite: writes it in seperate versioned file
# same for oldconfig
linux.save_in_defconfig_format_in_place:
mkdir -p "$(build)/$(linux_dir)" \
&& cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
savedefconfig \
&& mv "$(build)/$(linux_dir)/defconfig" "$(pwd)/$(linux_kconfig)"
linux.save_in_versioned_defconfig_format:
mkdir -p "$(build)/$(linux_dir)" \
&& cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
savedefconfig \
&& mv "$(build)/$(linux_dir)/defconfig" "$(pwd)/$(linux_kconfig)_defconfig_$(CONFIG_LINUX_VERSION)"
linux.save_in_oldconfig_format_in_place:
mkdir -p "$(build)/$(linux_dir)" \
&& cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
oldconfig \
&& mv "$(build)/$(linux_dir)/.config" "$(pwd)/$(linux_kconfig)"
linux.save_in_versioned_oldconfig:
mkdir -p "$(build)/$(linux_dir)" \
&& cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
CROSS_COMPILE="$(CROSS)" \
oldefconfig \
&& mv "$(build)/$(linux_dir)/.config" "$(pwd)/$(linux_kconfig)_oldconfig_$(CONFIG_LINUX_VERSION)"
# Prior of attempting to bump kernel version, call make BOARD=xyz linux.save_in_oldconfig_format_in_place
# Then bump board config's CONFIG_LINUX_VERSION. build as usual to extract new linux tarball.
# Then call make BOARD=xyz linux.prompt_for_new_config_options_for_kernel_version_bump
#The following ask new config choice for all new symbols that should be evaluated prior of creating PR
# Tip: Open a browser at https://www.kernelconfig.io/index.html
linux.prompt_for_new_config_options_for_kernel_version_bump:
mkdir -p "$(build)/$(linux_dir)" \
&& cp "$(pwd)/$(linux_kconfig)" "$(build)/$(linux_dir)/.config" \
&& $(MAKE) -C "$(build)/$(linux_base_dir)" \
O="$(build)/$(linux_dir)" \
ARCH="$(LINUX_ARCH)" \
oldconfig \
&& mv "$(build)/$(linux_dir)/.config" "$(pwd)/$(linux_kconfig)"
Reference in New Issue View Git Blame Copy Permalink