heads/boards/nitropad-nv41/nitropad-nv41.config
Thierry Laurion 9b101f1454 flash.sh: FLASHROM_OPTIONS->FLASH_OPTIONS: require FLASH_OPTIONS to specify flash program in board configs
- boards: switch flashrom->flashprog, FLASH_OPTIONS: flashprog memory --progress --programmer internal

TODO: check, Might break:
- xx20 : x220/t420/t520: used hwseq: verify compat
- legacy : not sure --ifd bios are support: verify compat (and drop, future PR drop legacy boards anyway...)
- talos: linux_mtd is used: verify compat

Tested:
- x230 works with awesome progress bar on read, erase and write.

Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-29 08:58:09 -04:00

73 lines
2.0 KiB
Makefile

# Nitrokey Nitropad NV41 board configuration
# Note: for reference, other GOP enabled FB board is librem_11
export CONFIG_COREBOOT=y
export CONFIG_COREBOOT_VERSION=dasharo
export CONFIG_LINUX_VERSION=6.1.8
CONFIG_COREBOOT_CONFIG=config/coreboot-nitropad-nv41.config
CONFIG_LINUX_CONFIG=config/linux-nitropad-x.config
#Enable DEBUG output
#export CONFIG_DEBUG_OUTPUT=y
#export CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT=y
#Enable TPM2 pcap output under /tmp
#export CONFIG_TPM2_CAPTURE_PCAP=y
#On-demand hardware support (modules.cpio)
CONFIG_LINUX_USB=y
CONFIG_LINUX_E1000=y
CONFIG_MOBILE_TETHERING=y
#Modules packed into tools.cpio
CONFIG_CRYPTSETUP2=y
CONFIG_FLASHPROG=y
CONFIG_FLASHTOOLS=y
CONFIG_GPG2=y
CONFIG_KEXEC=y
CONFIG_UTIL_LINUX=y
CONFIG_LVM2=y
CONFIG_MBEDTLS=y
CONFIG_PCIUTILS=y
CONFIG_MSRTOOLS=y
#Remote attestation support
# TPM2 requirements
CONFIG_TPM2_TSS=y
CONFIG_OPENSSL=y
#Remote Attestation common tools
CONFIG_POPT=y
CONFIG_QRENCODE=y
CONFIG_TPMTOTP=y
#HOTP based remote attestation for supported USB Security dongle
#With/Without TPM support
CONFIG_HOTPKEY=y
#Nitrokey Storage admin tool (deprecated)
#CONFIG_NKSTORECLI=n
#GUI Support
#Console based Whiptail support(Console based, no FB):
#CONFIG_SLANG=y
#CONFIG_NEWT=y
#FBWhiptail based (Graphical):
CONFIG_CAIRO=y
CONFIG_FBWHIPTAIL=y
#Additional tools (tools.cpio):
#SSH server (requires ethernet drivers, eg: CONFIG_LINUX_E1000E)
CONFIG_DROPBEAR=y
#Runtime configuration
#Automatically boot if HOTP is valid
export CONFIG_AUTO_BOOT_TIMEOUT=5
#TPM2 requirements
export CONFIG_TPM2_TOOLS=y
export CONFIG_PRIMARY_KEY_TYPE=ecc
#TPM1 requirements
#export CONFIG_TPM=y
export CONFIG_BOOTSCRIPT=/bin/gui-init
export CONFIG_BOOT_REQ_HASH=n
export CONFIG_BOOT_REQ_ROLLBACK=n
export CONFIG_BOOT_KERNEL_ADD=""
export CONFIG_BOOT_KERNEL_REMOVE="intel_iommu=on intel_iommu=igfx_off"
export CONFIG_BOARD_NAME="Nitropad NV41"
export CONFIG_FLASH_OPTIONS="flashprog memory --progress --programmer internal"
export CONFIG_AUTO_BOOT_TIMEOUT=5