heads/boards/qemu-coreboot-fbwhiptail-tpm2/qemu-coreboot-fbwhiptail-tpm2.config
Thierry Laurion 0679b75e1d Bump 5.10.5 kernel to 5.10.214
Cloudfare patches to speed up LUKS encryption were upstreamed into linux kernel and backported to 5.10.9: https://github.com/cloudflare/linux/issues/1#issuecomment-763085915
Therefore, we bump to latest of 5.10.x (bump from 5.10.5 which doesn't contain the fixes)

Trace:
    sed -i 's/5.10.5/5.10.214/g' boards/*/*.config
    find ./boards/*/*.config | awk -F "/" {'print $3'}| while read board; do echo "make BOARD=$board linux"; make BOARD=$board linux; echo make BOARD=$board linux.save_in_oldconfig_format_in_place || make BOARD=$board linux.modify_and_save_oldconfig_in_place; done
    git status | grep modified | awk -F ":" {'print $2'}| xargs git add
    git commit --signoff

- Move patches from 5.10.5 -> 5.10.214
- Add linux kernel hash and version under modules/linux
- Change board configs accordingly

Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-30 14:18:20 -04:00

96 lines
2.7 KiB
Makefile

# Configuration for building a coreboot ROM that works in
# the qemu emulator in graphical mode thanks to FBWhiptail
#
# TPM can be used with a qemu software TPM (TIS, 2.0).
export CONFIG_COREBOOT=y
export CONFIG_COREBOOT_VERSION=24.02.01
export CONFIG_LINUX_VERSION=5.10.214
CONFIG_COREBOOT_CONFIG=config/coreboot-qemu-tpm2.config
CONFIG_LINUX_CONFIG=config/linux-qemu.config
#Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)
#export CONFIG_RESTRICTED_BOOT=y
#export CONFIG_BASIC=y
#Enable HAVE_GPG_KEY_BACKUP to test GPG key backup drive (we cannot inject config under QEMU (no internal flashing))
#export CONFIG_HAVE_GPG_KEY_BACKUP=y
#Enable DEBUG output
export CONFIG_DEBUG_OUTPUT=y
export CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT=y
#Enable TPM2 pcap output under /tmp
export CONFIG_TPM2_CAPTURE_PCAP=y
#On-demand hardware support (modules.cpio)
CONFIG_LINUX_USB=y
CONFIG_LINUX_E1000=y
#CONFIG_MOBILE_TETHERING=y
#Runtime on-demand additional hardware support (modules.cpio)
export CONFIG_LINUX_USB_COMPANION_CONTROLLER=y
#Modules packed into tools.cpio
ifeq "$(CONFIG_UROOT)" "y"
CONFIG_BUSYBOX=n
else
#Modules packed into tools.cpio
CONFIG_CRYPTSETUP2=y
CONFIG_FLASHPROG=y
CONFIG_FLASHTOOLS=y
CONFIG_GPG2=y
CONFIG_KEXEC=y
CONFIG_UTIL_LINUX=y
CONFIG_LVM2=y
CONFIG_MBEDTLS=y
CONFIG_PCIUTILS=y
#Runtime tools to write to MSR
CONFIG_MSRTOOLS=y
#Remote attestation support
# TPM2 requirements
CONFIG_TPM2_TSS=y
CONFIG_OPENSSL=y
#Remote Attestation common tools
CONFIG_POPT=y
CONFIG_QRENCODE=y
CONFIG_TPMTOTP=y
#HOTP based remote attestation for supported USB Security dongle
#With/Without TPM support
#CONFIG_HOTPKEY=y
#Nitrokey Storage admin tool (deprecated)
#CONFIG_NKSTORECLI=n
#GUI Support
#Console based Whiptail support(Console based, no FB):
#CONFIG_SLANG=y
#CONFIG_NEWT=y
#FBWhiptail based (Graphical):
CONFIG_CAIRO=y
CONFIG_FBWHIPTAIL=y
#Additional tools (tools.cpio):
#SSH server (requires ethernet drivers, eg: CONFIG_LINUX_E1000E)
CONFIG_DROPBEAR=y
endif
#Runtime configuration
#Automatically boot if HOTP is valid
export CONFIG_AUTO_BOOT_TIMEOUT=5
#TPM2 requirements
export CONFIG_TPM2_TOOLS=y
export CONFIG_PRIMARY_KEY_TYPE=ecc
#TPM1 requirements
#export CONFIG_TPM=y
export CONFIG_BOOTSCRIPT=/bin/gui-init
#text-based original init:
#export CONFIG_BOOTSCRIPT=/bin/generic-init
export CONFIG_BOOT_REQ_HASH=n
export CONFIG_BOOT_REQ_ROLLBACK=n
export CONFIG_BOOT_RECOVERY_SERIAL="/dev/ttyS0"
export CONFIG_BOOT_KERNEL_ADD="console=ttyS0 console=tty systemd.zram=0"
export CONFIG_BOOT_KERNEL_REMOVE="quiet rhgb splash"
export CONFIG_BOARD_NAME="qemu-coreboot-fbwhiptail-tpm2"
#export CONFIG_FLASH_OPTIONS="flashprog --progress --programmer internal"
#export CONFIG_AUTO_BOOT_TIMEOUT=5
BOARD_TARGETS := qemu