heads/initrd/bin/tpmr

#!/bin/bash
# TPM Wrapper - to unify tpm and tpm2 subcommands

. /etc/functions

SECRET_DIR="/tmp/secret"
PRIMARY_HANDLE="0x81000000"
ENC_SESSION_FILE="enc.ctx"
DEC_SESSION_FILE="dec.ctx"
PRIMARY_HANDLE_FILE="primary.handle"

set -e -o pipefail
if [ -r "/tmp/config" ]; then
	. /tmp/config
else
	. /etc/config
fi

TRACE "Under /bin/tpmr"

tpm2_extend() {
	TRACE "Under /bin/tpmr:tpm2_extend"
	DEBUG "value of passed arguments: $1 $2 $3 $4 $5 $6"
	while true; do
		case "$1" in
			-ix)
				DEBUG "case: -ix $2"
				index="$2"
				shift 2;;
			-ic)
				DEBUG "case: -ic $2"
				hash="`echo $2|sha256sum|cut -d' ' -f1`"
				shift 2;;
			-if)
				DEBUG "case: -if $2"
				hash="`sha256sum $2|cut -d' ' -f1`"
				shift 2;;
			*)
				break;;
		esac
	done
	DEBUG "tpm2 pcrextend $index:sha256=$hash"
	tpm2 pcrextend "$index:sha256=$hash"
	DEBUG "tpm2 pcread sha256:$index"
	tpm2 pcrread "sha256:$index"
}

tpm2_counter_read() {
	TRACE "Under /bin/tpmr:tpm2_counter_read"
	while true; do
		case "$1" in
			-ix)
				index="$2"
				shift 2;;
			*)
				break;;
		esac
	done
	echo "$index: `tpm2 nvread 0x$index | xxd -pc8`"
}

tpm2_counter_inc() {
	TRACE "Under /bin/tpmr:tpm2_counter_inc"
	while true; do
		case "$1" in
			-ix)
				index="$2"
				shift 2;;
			-pwdc)
				pwd="$2"
				shift 2;;
			*)
				break;;
		esac
	done
	tpm2 nvincrement "0x$index" > /dev/console
	echo "$index: `tpm2 nvread 0x$index | xxd -pc8`"
}

tpm2_counter_cre() {
	TRACE "Under /bin/tpmr:tpm2_counter_cre"
	while true; do
		case "$1" in
			-pwdo)
				pwdo="$2"
				shift 2;;
			-pwdof)
				pwdo="file:$2"
				shift 2;;
			-pwdc)
				pwd="$2"
				shift 2;;
			-la)
				label="$2"
				shift 2;;
			*)
				break;;
		esac
	done
	rand_index="1`dd if=/dev/urandom bs=1 count=3 | xxd -pc3`"
	tpm2 nvdefine -C o -s 8 -a "ownerread|authread|authwrite|nt=1" -P "$pwdo" "0x$rand_index" > /dev/console
	echo "$rand_index: (valid after an increment)"
}

tpm2_startsession() {
	TRACE "Under /bin/tpmr:tpm2_startsession"
	mkdir -p "$SECRET_DIR"
	tpm2 flushcontext -Q \
		--transient-object \
		|| die "tpm2_flushcontext: unable to flush transient handles"

	tpm2 flushcontext -Q \
		--loaded-session \
		|| die "tpm2_flushcontext: unable to flush sessions"

	tpm2 flushcontext -Q \
		--saved-session \
		|| die "tpm2_flushcontext: unable to flush saved session"
	tpm2 readpublic -Q -c "$PRIMARY_HANDLE" -t "/tmp/$PRIMARY_HANDLE_FILE"
	tpm2 startauthsession -Q -c "/tmp/$PRIMARY_HANDLE_FILE" --hmac-session -S "/tmp/$ENC_SESSION_FILE"
	tpm2 startauthsession -Q -c "/tmp/$PRIMARY_HANDLE_FILE" --hmac-session -S "/tmp/$DEC_SESSION_FILE"
	tpm2 sessionconfig -Q --disable-encrypt "/tmp/$DEC_SESSION_FILE"
}

# Trap EXIT with cleanup_session() to release a TPM2 session and delete the
# session file.  E.g.:
#   trap "cleanup_session '$SESSION_FILE'" EXIT
cleanup_session() {
	session_file="$1"
	if [ -f "$session_file" ]; then
		DEBUG "Clean up session: $session_file"
		# Nothing else we can do if this fails, still remove the file
		tpm2 flushcontext -Q "$session_file" || DEBUG "Flush failed for session $session_file"
		rm -f "$session_file"
	else
		DEBUG "No need to clean up session: $session_file"
	fi
}

# Clean up a file by shredding it.  No-op if the file wasn't created.  Use with
# trap EXIT, e.g.:
#   trap "cleanup_shred '$FILE'" EXIT
cleanup_shred() {
	shred -n 10 -z -u "$1" 2>/dev/null || true
}

# tpm2_seal: Seal a file against PCR values and, optionally, a password.
# If a password is given, both the PCRs and password are required to unseal the
# file.  PCRs are provided as a PCR list and data file.  PCR data must be
# provided - TPM2 allows the TPM to fall back to current PCR values, but it is
# not required to support this.
tpm2_seal() {
	TRACE "Under /bin/tpmr:tpm2_seal"
	file="$1" #$KEY_FILE
	handle="$2" # 0x8100000$TPM_INDEX
	pcrl="$3" #sha256:0,1,2,3,4,5,6,7
	pcrf="$4"
	pass="$5"
	mkdir -p "$SECRET_DIR"
	bname="`basename $file`"

	DEBUG "tpm2_seal: file=$file handle=$handle pcrl=$pcrl pcrf=$pcrf pass=$([ "$pass" ] && echo "<yes>" || echo "<no>")"

	# Create a policy requiring both PCRs and the object's authentication
	# value using a trial session.
	TRIAL_SESSION=/tmp/sealfile_trial.session
	AUTH_POLICY=/tmp/sealfile_auth.policy
	rm -f "$TRIAL_SESSION" "$AUTH_POLICY"
	tpm2 startauthsession -g sha256 -S "$TRIAL_SESSION"
	# We have to clean up the session
	trap "cleanup_session '$TRIAL_SESSION'" EXIT
	# Save the policy hash in case the password policy is not used (we have
	# to get this from the last step, whichever it is).
	tpm2 policypcr -Q -l "$pcrl" -f "$pcrf" -S "$TRIAL_SESSION" -L "$AUTH_POLICY"
	CREATE_PASS_ARGS=()
	if [ "$pass" ]; then
		# Add an object authorization policy (the object authorization
		# will be the password).  Save the digest, this is the resulting
		# policy.
		tpm2 policypassword -Q -S "$TRIAL_SESSION" -L "$AUTH_POLICY"
		# Pass the password to create later.  Pass the sha256sum of the
		# password to the TPM so the password is not limited to 32 chars
		# in length.
		CREATE_PASS_ARGS=(-p "hex:$(echo -n "$pass" | sha256sum | cut -d ' ' -f 1)")
	fi

	# Create the object with this policy and the auth value.
	# NOTE: We disable USERWITHAUTH and enable ADMINWITHPOLICY so the
	# password cannot be used on its own, the PCRs are also required.
	# (The default is to allow either policy auth _or_ password auth.  In
	# this case the policy includes the password, and we don't want to allow
	# the password on its own.)
	# TODO: Providing the password directly limits it to the size of the
	# largest hash supported by the TPM (at least 32 chars for sha256)
	tpm2 create -Q -C "/tmp/$PRIMARY_HANDLE_FILE" \
		-i "$file" \
		-u "$SECRET_DIR/$bname.priv" \
		-r "$SECRET_DIR/$bname.pub" \
		-L "$AUTH_POLICY" \
		-S "/tmp/$DEC_SESSION_FILE" \
		-a "fixedtpm|fixedparent|adminwithpolicy" \
		"${CREATE_PASS_ARGS[@]}"

	tpm2 load -Q -C "/tmp/$PRIMARY_HANDLE_FILE" -u "$SECRET_DIR/$bname.priv" -r "$SECRET_DIR/$bname.pub" -c "$SECRET_DIR/$bname.seal.ctx"
	read -s -p "TPM owner password: " key_password
	echo # new line after password prompt
	# remove possible data occupying this handle
	tpm2 evictcontrol -Q -C o -P "$key_password" -c "$handle" 2>/dev/null || true
	DO_WITH_DEBUG tpm2 evictcontrol -Q -C o -P "$key_password" -c "$SECRET_DIR/$bname.seal.ctx" "$handle"
}

# Unseal a file sealed by tpm2_seal.  The PCR list must be provided, the
# password must be provided if one was used to seal (and cannot be provided if
# no password was used to seal).
tpm2_unseal() {
	TRACE "Under /bin/tpmr:tpm2_unseal"
	index="$1"
	pcrl="$2"
	sealed_size="$3"
	file="$4"
	pass="$5"

	# TPM2 doesn't care about sealed_size, only TPM1 needs that.  We don't
	# have to separately read the sealed file on TPM2.

	# Pad with up to 6 zeros, i.e. '0x81000001', '0x81001234', etc.
	handle="$(printf "0x81%6s" "$index" | tr ' ' 0)"

	DEBUG "tpm2_unseal: handle=$handle pcrl=$pcrl file=$file pass=$([ "$pass" ] && echo "<yes>" || echo "<no>")"

	# If we don't have the primary handle (TPM hasn't been reset), tpm2 will
	# print nonsense error messages about an unexpected handle value.  We
	# can't do anything without a primary handle.
	if [ ! -f "/tmp/$PRIMARY_HANDLE_FILE" ]; then
		DEBUG "tpm2_unseal: No primary handle, cannot attempt to unseal"
		exit 1
	fi

	POLICY_SESSION=/tmp/unsealfile_policy.session
	rm -f "$POLICY_SESSION"
	tpm2 startauthsession -Q -g sha256 -c "/tmp/$PRIMARY_HANDLE_FILE" -S "$POLICY_SESSION" --policy-session
	trap "cleanup_session '$POLICY_SESSION'" EXIT
	# Check the PCR policy
	tpm2 policypcr -Q -l "$pcrl" -S "$POLICY_SESSION"
	UNSEAL_PASS_SUFFIX=""
	if [ "$pass" ]; then
		# Add the object authorization policy (the actual password is
		# provided later, but we must include this so the policy we
		# attempt to use is correct).
		tpm2 policypassword -Q -S "$POLICY_SESSION"
		# When unsealing, include the password with the auth session
		UNSEAL_PASS_SUFFIX="+hex:$(echo -n "$pass" | sha256sum | cut -d ' ' -f 1)"
		# Disable encryption in the policy session - there seems to be a
		# bug in tpm2's decryption.  If we leave encryption enabled, the
		# unseal succeeds but we receive garbage, probably because it
		# was decrypted incorrectly.  However, this causes the unsealed
		# data to be sent in the clear from the TPM.
		tpm2 sessionconfig -Q --disable-encrypt "$POLICY_SESSION"
	fi

	tpm2 unseal -Q -c "$handle" -p "session:$POLICY_SESSION$UNSEAL_PASS_SUFFIX" > "$file"
}

tpm2_reset() {
	TRACE "Under /bin/tpmr:tpm2_reset"
	key_password="$1"
	mkdir -p "$SECRET_DIR"
	tpm2 clear -c platform || warn "Unable to clear TPM on platform hierarchy!"
	tpm2 changeauth -c owner "$key_password"
	tpm2 createprimary -C owner -g sha256 -G "${CONFIG_PRIMARY_KEY_TYPE:-rsa}" -c "$SECRET_DIR/primary.ctx" -P "$key_password"
	tpm2 evictcontrol -C owner -c "$SECRET_DIR/primary.ctx" "$PRIMARY_HANDLE" -P "$key_password"
	shred -u "$SECRET_DIR/primary.ctx"
	tpm2_startsession
}

# Perform final cleanup before boot and lock the platform heirarchy.
tpm2_kexec_finalize() {
	# Flush sessions and transient objects
	tpm2 flushcontext -Q --transient-object \
		|| warn "tpm2_flushcontext: unable to flush transient handles"
	tpm2 flushcontext -Q --loaded-session \
		|| warn "tpm2_flushcontext: unable to flush sessions"
	tpm2 flushcontext -Q --saved-session \
		|| warn "tpm2_flushcontext: unable to flush saved session"

	# Add a random passphrase to platform hierarchy to prevent TPM2 from
	# being cleared in the OS.
	# This passphrase is only effective before the next boot.
	echo "Locking platform hierarchy..."
	randpass=$(dd if=/dev/urandom bs=4 count=1 | xxd -p)
	tpm2 changeauth -c platform "$randpass" \
		|| warn "Failed to lock platform hierarchy of TPM2!"
}

tpm1_unseal() {
	TRACE "Under /bin/tpmr:tpm1_unseal"
	index="$1"
	pcrl="$2"
	sealed_size="$3"
	file="$4"
	pass="$5"

	# pcrl (the PCR list) is unused in TPM1.  The TPM itself knows which
	# PCRs were used to seal and checks them.  We can't verify that it's
	# correct either, so just ignore it in TPM1.

	sealed_file="$SECRET_DIR/tpm1_unseal_sealed.bin"
	trap "cleanup_shred '$sealed_file'" EXIT

	rm -f "$sealed_file"

	tpm nv_readvalue \
		-in "$index" \
		-sz "$sealed_size" \
		-of "$sealed_file" \
		|| die "Unable to read sealed file from TPM NVRAM"

	PASS_ARGS=()
	if [ "$pass" ]; then
		PASS_ARGS=(-pwdd "$pass")
	fi

	tpm unsealfile \
		-if "$sealed_file" \
		-of "$file" \
		"${PASS_ARGS[@]}" \
		-hk 40000000
}

if [ "$CONFIG_TPM" != "y" ]; then
	echo >&2 "No TPM!"
	exit 1
fi

# TPM1 - most commands forward directly to tpm, but some are still wrapped for
# consistency with tpm2.
if [ "$CONFIG_TPM2_TOOLS" != "y" ]; then
	subcmd="$1"
	# Don't shift yet, for most commands we will just forward to tpm.
	case "$subcmd" in
		kexec_finalize)
			;;	# Nothing on TPM1.
		unseal)
			shift; tpm1_unseal "$@";;
		*)
			exec tpm "$@"
			;;
	esac
	exit 0
fi

# TPM2 - all commands implemented as wrappers around tpm2
subcmd="$1"
shift 1
case "$subcmd" in
	extend)
		tpm2_extend "$@";;
	counter_read)
		tpm2_counter_read "$@";;
	counter_increment)
		tpm2_counter_inc "$@";;
	counter_create)
		tpm2_counter_cre "$@";;
	nv_definespace)
		tpm2_nvdef "$@";;
	nv_writevalue)
		tpm2_nvw "$@";;
	nv_readvalue)
		tpm2_nvr "$@";;
	seal)
		tpm2_seal "$@";;
	startsession)
		tpm2_startsession "$@";;
	unseal)
		tpm2_unseal "$@";;
	reset)
		tpm2_reset "$@";;
	kexec_finalize)
		tpm2_kexec_finalize "$@";;
	*)
		echo "Command $subcmd not wrapped!"
		exit 1
esac