mirror of
https://github.com/linuxboot/heads.git
synced 2024-12-24 15:16:42 +00:00
6300dd178a
- Add 4.19 under modules/coreboot - point all 4.13 boards to 4.19 - adapt x230 FHD/EDP patch under patches/coreboot-4.19/0001-x230-fhd-variant.patch (poked upstream to fix patch under https://review.coreboot.org/c/coreboot/+/28950) - correct versioning info under .circleci/config/yml
156 lines
4.9 KiB
Makefile
156 lines
4.9 KiB
Makefile
# Configuration for building a coreboot ROM that works in
|
|
# the qemu emulator in console mode thanks to Whiptail
|
|
#
|
|
# TPM can be used with a qemu software TPM (TIS, 1.2).
|
|
export CONFIG_COREBOOT=y
|
|
export CONFIG_COREBOOT_VERSION=4.19
|
|
export CONFIG_LINUX_VERSION=5.10.5
|
|
|
|
#Enable DEBUG output
|
|
export CONFIG_DEBUG_OUTPUT=y
|
|
export CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT=y
|
|
|
|
CONFIG_COREBOOT_CONFIG=config/coreboot-qemu-tpm1.config
|
|
CONFIG_LINUX_CONFIG=config/linux-qemu.config
|
|
|
|
ifeq "$(CONFIG_UROOT)" "y"
|
|
CONFIG_BUSYBOX=n
|
|
else
|
|
CONFIG_KEXEC=y
|
|
CONFIG_QRENCODE=y
|
|
CONFIG_TPMTOTP=y
|
|
CONFIG_POPT=y
|
|
CONFIG_FLASHTOOLS=y
|
|
CONFIG_FLASHROM=y
|
|
CONFIG_PCIUTILS=y
|
|
CONFIG_UTIL_LINUX=y
|
|
CONFIG_CRYPTSETUP2=y
|
|
CONFIG_GPG2=y
|
|
CONFIG_LVM2=y
|
|
CONFIG_MBEDTLS=y
|
|
CONFIG_DROPBEAR=y
|
|
CONFIG_MSRTOOLS=y
|
|
#CONFIG_HOTPKEY=y
|
|
|
|
#Uncomment only one of the following block
|
|
#Required for graphical gui-init (FBWhiptail)
|
|
CONFIG_CAIRO=y
|
|
CONFIG_FBWHIPTAIL=y
|
|
#
|
|
#text-based init (generic-init and gui-init)
|
|
#CONFIG_NEWT=y
|
|
#CONFIG_SLANG=y
|
|
|
|
endif
|
|
|
|
export CONFIG_LINUX_USB_COMPANION_CONTROLLER=y
|
|
CONFIG_LINUX_USB=y
|
|
CONFIG_LINUX_E1000=y
|
|
|
|
#Uncomment only one BOOTSCRIPT:
|
|
#Whiptail-based init (text-based or FBWhiptail)
|
|
export CONFIG_BOOTSCRIPT=/bin/gui-init
|
|
#
|
|
#text-based original init:
|
|
#export CONFIG_BOOTSCRIPT=/bin/generic-init
|
|
export CONFIG_BOOT_REQ_HASH=n
|
|
export CONFIG_BOOT_REQ_ROLLBACK=n
|
|
export CONFIG_BOOT_RECOVERY_SERIAL="/dev/ttyS0"
|
|
export CONFIG_BOOT_KERNEL_ADD="console=ttyS0 console=tty systemd.zram=0"
|
|
export CONFIG_BOOT_KERNEL_REMOVE="quiet rhgb splash"
|
|
|
|
export CONFIG_TPM=y
|
|
|
|
export CONFIG_BOOT_DEV="/dev/vda1"
|
|
export CONFIG_BOARD_NAME="qemu-coreboot-fbwhiptail-tpm1"
|
|
|
|
# Use the GPG-injected ROM if a key was given, since we can't reflash a GPG
|
|
# keyring in QEMU. Otherwise use the plain ROM, some things can still be tested
|
|
# that way without a GPG key.
|
|
ifneq "$(PUBKEY_ASC)" ""
|
|
QEMU_BOOT_ROM := $(build)/$(BOARD)/$(CB_OUTPUT_FILE_GPG_INJ)
|
|
else
|
|
QEMU_BOOT_ROM := $(build)/$(BOARD)/$(CB_OUTPUT_FILE)
|
|
endif
|
|
|
|
#borrowed from https://github.com/orangecms/webboot/blob/boot-via-qemu/run-webboot.sh
|
|
TPMDIR=$(build)/$(BOARD)/vtpm
|
|
$(TPMDIR)/.manufacture:
|
|
mkdir -p "$(TPMDIR)"
|
|
swtpm_setup --tpm-state "$(TPMDIR)" --create-platform-cert --lock-nvram
|
|
touch "$(TPMDIR)/.manufacture"
|
|
ROOT_DISK_IMG:=$(build)/$(BOARD)/root.qcow2
|
|
# Default to 20G disk
|
|
QEMU_DISK_SIZE?=20G
|
|
$(ROOT_DISK_IMG):
|
|
qemu-img create -f qcow2 "$(ROOT_DISK_IMG)" $(QEMU_DISK_SIZE)
|
|
# Remember the amount of memory so it doesn't have to be specified every time.
|
|
# Default to 4G, most bootable OSes are not usable with less.
|
|
QEMU_MEMORY_SIZE?=4G
|
|
MEMORY_SIZE_FILE=$(build)/$(BOARD)/memory
|
|
$(MEMORY_SIZE_FILE):
|
|
@echo "$(QEMU_MEMORY_SIZE)" >"$(MEMORY_SIZE_FILE)"
|
|
USB_FD_IMG=$(build)/$(BOARD)/usb_fd.raw
|
|
$(USB_FD_IMG):
|
|
dd if=/dev/zero bs=1M of="$(USB_FD_IMG)" bs=1M count=128
|
|
# Debian obnoxiously does not include /usr/sbin in PATH for non-root, even
|
|
# though it is meaningful to use mkfs.vfat (etc.) as non-root
|
|
MKFS_VFAT=mkfs.vfat; \
|
|
[ -x /usr/sbin/mkfs.vfat ] && MKFS_VFAT=/usr/sbin/mkfs.vfat; \
|
|
"$$MKFS_VFAT" "$(USB_FD_IMG)"
|
|
# Pass INSTALL_IMG=<path_to_img.iso> to attach an installer as a USB flash drive instead
|
|
# of the temporary flash drive for exporting GPG keys.
|
|
ifneq "$(INSTALL_IMG)" ""
|
|
QEMU_USB_FD_IMG := $(INSTALL_IMG)
|
|
else
|
|
QEMU_USB_FD_IMG := $(USB_FD_IMG)
|
|
endif
|
|
# To forward a USB token, set USB_TOKEN to one of the following:
|
|
# - NitrokeyPro - forwards a Nitrokey Pro by VID:PID
|
|
# - LibremKey - forwards a Librem Key by VID:PID
|
|
# - <other> - Provide the QEMU usb-host parameters, such as
|
|
# 'hostbus=<#>,hostport=<#>' or 'vendorid=<#>,productid=<#>'
|
|
ifeq "$(USB_TOKEN)" "NitrokeyPro"
|
|
QEMU_USB_TOKEN_DEV := -device usb-host,vendorid=8352,productid=16648
|
|
else ifeq "$(USB_TOKEN)" "NitrokeyStorage"
|
|
QEMU_USB_TOKEN_DEV := -device usb-host,vendorid=8352,productid=16649
|
|
else ifeq "$(USB_TOKEN)" "Nitrokey3NFC"
|
|
QEMU_USB_TOKEN_DEV := -device usb-host,vendorid=8352,productid=17074
|
|
else ifeq "$(USB_TOKEN)" "LibremKey"
|
|
QEMU_USB_TOKEN_DEV := -device usb-host,vendorid=12653,productid=19531
|
|
else ifneq "$(USB_TOKEN)" ""
|
|
QEMU_USB_TOKEN_DEV := -device "usb-host,$(USB_TOKEN)"
|
|
endif
|
|
|
|
run: $(TPMDIR)/.manufacture $(ROOT_DISK_IMG) $(MEMORY_SIZE_FILE) $(USB_FD_IMG)
|
|
swtpm socket \
|
|
--tpmstate dir="$(TPMDIR)" \
|
|
--flags "startup-clear" \
|
|
--terminate \
|
|
--ctrl type=unixio,path="$(TPMDIR)/sock" &
|
|
sleep 0.5
|
|
|
|
-qemu-system-x86_64 -drive file="$(ROOT_DISK_IMG)",if=virtio \
|
|
--machine q35,accel=kvm:tcg \
|
|
-rtc base=utc \
|
|
-smp "$$(nproc)" \
|
|
-vga virtio \
|
|
-full-screen \
|
|
-m "$$(cat "$(MEMORY_SIZE_FILE)")" \
|
|
-serial stdio \
|
|
--bios "$(QEMU_BOOT_ROM)" \
|
|
-object rng-random,filename=/dev/urandom,id=rng0 \
|
|
-device virtio-rng-pci,rng=rng0 \
|
|
-netdev user,id=u1 -device e1000,netdev=u1 \
|
|
-chardev socket,id=chrtpm,path="$(TPMDIR)/sock" \
|
|
-tpmdev emulator,id=tpm0,chardev=chrtpm \
|
|
-device tpm-tis,tpmdev=tpm0 \
|
|
-device qemu-xhci,id=usb \
|
|
-device usb-tablet \
|
|
-drive file="$(QEMU_USB_FD_IMG)",if=none,id=usb-fd-drive,format=raw \
|
|
-device usb-storage,bus=usb.0,drive=usb-fd-drive \
|
|
$(QEMU_USB_TOKEN_DEV) \
|
|
|
|
stty sane
|
|
@echo
|