Trammell hudson 4f3b6682a6

supermicro-x11ssh: firmware install works, need sata drivers to boot

2019-08-11 16:00:41 +02:00

..

busybox.config

Enable busybox loadkmap command

2019-04-29 15:36:25 +01:00

coreboot-kgpe-d16.config

Fix DOTCONFIG in coreboot module and clean up configs

2018-10-27 14:03:45 -07:00

coreboot-librem13v2.config

configs/coreboot/librem*: remove iommu=pt from linux cmd line

2019-02-12 17:09:56 -06:00

coreboot-librem13v4.config

configs/coreboot/librem*: remove iommu=pt from linux cmd line

2019-02-12 17:09:56 -06:00

coreboot-librem15v3.config

configs/coreboot/librem*: remove iommu=pt from linux cmd line

2019-02-12 17:09:56 -06:00

coreboot-librem15v4.config

configs/coreboot/librem*: remove iommu=pt from linux cmd line

2019-02-12 17:09:56 -06:00

coreboot-qemu.config

Fix DOTCONFIG in coreboot module and clean up configs

2018-10-27 14:03:45 -07:00

coreboot-supermicro-x11ssh.config

supermicro-x11ssh: firmware install works, need sata drivers to boot

2019-08-11 16:00:41 +02:00

coreboot-x220.config

Fix DOTCONFIG in coreboot module and clean up configs

2018-10-27 14:03:45 -07:00

coreboot-x230-flash.config

Fix DOTCONFIG in coreboot module and clean up configs

2018-10-27 14:03:45 -07:00

coreboot-x230.config

x230: use fbwhiptail and gui-init instead of generic-init

2019-02-07 21:06:44 +01:00

linux-kgpe-d16.config

Disable EXT2 standard driver (replaced by EXT4 driver)

2019-02-19 21:16:52 +00:00

linux-librem13v2.config

Disable EXT2 standard driver (replaced by EXT4 driver)

2019-02-19 21:16:52 +00:00

linux-linuxboot.config

linuxboot: set serial speed to 115200

2019-08-11 15:59:40 +02:00

linux-qemu.config

Disable EXT2 standard driver (replaced by EXT4 driver)

2019-02-19 21:16:52 +00:00

linux-x230-flash.config

x230-flash depends on independent and minimal linux-x230-flash.config. ash_history content replaced with usefull commands. Everything is there to generate keys from Yubikey/Nitrokey, export armored versions to external media and cbfs them into reproducible rom and flash resulting rom with flashrom-x230.sh.

2018-05-07 16:45:47 -04:00

linux-x230.config

config/linux-x230: remove debug symbols

2019-05-20 13:47:20 +02:00