heads/Makefile

# Need to set CB_OUTPUT_FILE before board .config included so
# that target overrides in x230/x430-flash (eg) are properly handled
GIT_HASH	:= $(shell git rev-parse HEAD)
GIT_STATUS	:= $(shell \
	if git diff --exit-code >/dev/null ; then \
		echo clean ; \
	else \
		echo dirty ; \
	fi)
HEADS_GIT_VERSION	:= $(shell git describe --tags --dirty)

CB_OUTPUT_FILE := heads-$(BOARD)-$(HEADS_GIT_VERSION).rom
LB_OUTPUT_FILE := linuxboot-$(BOARD)-$(HEADS_GIT_VERSION).rom

all:
-include .config

ifneq "$(TOOLCHAIN)" ""
$(info Using $(TOOLCHAIN) for cross compiler and packages)
packages	?= $(TOOLCHAIN)/packages
CROSS		:= $(TOOLCHAIN)/crossgcc/x86_64-linux-musl/bin/x86_64-linux-musl-
endif

modules-y 	:=
pwd 		:= $(shell pwd)
packages 	?= $(pwd)/packages
build		:= $(pwd)/build
config		:= $(pwd)/config
INSTALL		:= $(pwd)/install
log_dir		:= $(build)/log

# Controls how many parallel jobs are invoked in subshells
CPUS		?= $(shell nproc)
#MAKE_JOBS	?= -j$(CPUS) --max-load 16

# Create the log directory if it doesn't already exist
BUILD_LOG := $(shell mkdir -p "$(log_dir)" )

WGET ?= wget

# Check that we have a correct version of make
# that matches at least the major version
LOCAL_MAKE_VERSION := $(shell $(MAKE) --version | head -1 | cut -d' ' -f3)
include modules/make

ifneq "" "$(filter $(make_version)%,$(LOCAL_MAKE_VERSION))"

# Timestamps should be in ISO format
DATE=`date --rfc-3339=seconds`

# This is the correct version of Make

# Check we have a suitable version of gawk
# that's at least the same major version
LOCAL_GAWK_VERSION := $(shell gawk --version 2>/dev/null | head -1 | cut -d' ' -f3 | cut -d, -f1)
LOCAL_GAWK_MAJOR_VERSION := $(patsubst .%,.,$(LOCAL_GAWK_VERSION))
include modules/gawk

# Wrong version
ifeq "" "$(filter $(LOCAL_GAWK_MAJOR_VERSION).%,$(gawk_version))"
# Wrong gawk version detected -- build our local version
# and re-invoke the Makefile with it instead.
$(eval $(shell echo >&2 "$(DATE) Wrong gawk detected: $(LOCAL_GAWK_VERSION)"))
HEADS_GAWK := $(build)/$(gawk_dir)/gawk

# Once we have a suitable version of gawk, we can rerun make
all linux cpio run: $(HEADS_GAWK)
	LANG=C HEADS_GAWK=$(HEADS_GAWK) $(MAKE) $(MAKE_JOBS) $@
%.clean %.vol %.menuconfig: $(HEADS_GAWK)
	LANG=C HEADS_GAWK=$(HEADS_GAWK) $(MAKE) $@

bootstrap: $(HEADS_GAWK)

# How to download and build the correct version of gawk
$(packages)/$(gawk_tar):
	$(WGET) -O "$@.tmp" "$(gawk_url)"
	if ! echo "$(gawk_hash)  $@.tmp" | sha256sum --check -; then \
		exit 1 ; \
	fi
	mv "$@.tmp" "$@"

$(build)/$(gawk_dir)/.extract: $(packages)/$(gawk_tar)
	tar xf "$<" -C "$(build)"
	touch "$@"

$(build)/$(gawk_dir)/.patch: $(build)/$(gawk_dir)/.extract
#	( cd "$(dir $@)" ; patch -p1 ) < "patches/gawk-$(gawk_version).patch"
	touch "$@"

$(build)/$(gawk_dir)/.configured: $(build)/$(gawk_dir)/.patch
	cd "$(dir $@)" ; \
	./configure 2>&1 \
	| tee "$(log_dir)/gawk.configure.log" \
	$(VERBOSE_REDIRECT)
	touch "$@"

$(HEADS_GAWK): $(build)/$(gawk_dir)/.configured
	$(MAKE) -C "$(dir $@)" $(MAKE_JOBS) \
		2>&1 \
		| tee "$(log_dir)/gawk.log" \
		$(VERBOSE_REDIRECT)
endif


BOARD		?= qemu-coreboot
CONFIG		:= $(pwd)/boards/$(BOARD)/$(BOARD).config

ifneq "y" "$(shell [ -r '$(CONFIG)' ] && echo y)"
$(error $(CONFIG): board configuration does not exist)
endif

include $(CONFIG)

# Unless otherwise specified, we are building for heads
CONFIG_HEADS	?= y

# record the build date / git hashes and other files here
HASHES		:= $(build)/$(BOARD)/hashes.txt

# Create the board output directory if it doesn't already exist
BOARD_LOG	:= $(shell \
	mkdir -p "$(build)/$(BOARD)" ; \
	echo "$(DATE) $(GIT_HASH) $(GIT_STATUS)" > "$(HASHES)" ; \
)


# If V is set in the environment, do not redirect the tee
# command to /dev/null.
ifeq "$V" ""
VERBOSE_REDIRECT := > /dev/null
# Not verbose, so we only show the header
define do =
	@echo "$(DATE) $1 $(2:$(pwd)/%=%)"
	@$3
endef
else
# Verbose, so we display what we are doing
define do =
	@echo "$(DATE) $1 $(2:$(pwd)/%=%)"
	$3
endef
endif


# Create a temporary directory for the initrd
initrd_dir	:= $(BOARD)
initrd_tmp_dir	:= $(shell mktemp -d)
initrd_lib_dir	:= $(initrd_tmp_dir)/lib
initrd_bin_dir	:= $(initrd_tmp_dir)/bin
modules-y += initrd

$(shell mkdir -p "$(initrd_lib_dir)" "$(initrd_bin_dir)")

# We are running our own version of make,
# proceed with the build.

# Force pipelines to fail if any of the commands in the pipe fail
SHELL := /bin/bash
.SHELLFLAGS := -o pipefail -c

# Include the musl-cross module early so that $(CROSS) will
# be defined prior to any other module.
include modules/musl-cross

musl_dep	:= musl-cross
heads_cc	:= $(CROSS)gcc \
	-fdebug-prefix-map=$(pwd)=heads \
	-gno-record-gcc-switches \
	-D__MUSL__ \
	-isystem $(INSTALL)/include \
	-L$(INSTALL)/lib \

CROSS_TOOLS_NOCC := \
	AR="$(CROSS)ar" \
	LD="$(CROSS)ld" \
	STRIP="$(CROSS)strip" \
	NM="$(CROSS)nm" \
	OBJCOPY="$(CROSS)objcopy" \
	OBJDUMP="$(CROSS)objdump" \
	PKG_CONFIG_PATH="$(INSTALL)/lib/pkgconfig" \
	PKG_CONFIG_SYSROOT_DIR="$(INSTALL)" \

ifneq "$(HEADS_GAWK)" ""
CROSS_TOOLS_NOCC += AWK=$(HEADS_GAWK)
endif

CROSS_TOOLS := \
	CC="$(heads_cc)" \
	$(CROSS_TOOLS_NOCC) \



ifeq ($(CONFIG_COREBOOT), y)
all: $(build)/$(BOARD)/$(CB_OUTPUT_FILE)
else ifeq ($(CONFIG_LINUXBOOT), y)
all: $(build)/$(BOARD)/$(LB_OUTPUT_FILE)
else
$(error "$(BOARD): neither CONFIG_COREBOOT nor CONFIG_LINUXBOOT is set?")
endif

all:
	@sha256sum $< | tee -a "$(HASHES)"

# Disable all built in rules
.INTERMEDIATE:
.SUFFIXES:
FORCE:

# Make helpers to operate on lists of things
# Prefix is "smart" and doesn't add the prefix for absolute file paths
define prefix =
$(foreach _, $2, $(if $(patsubst /%,,$_),$1$_,$_))
endef
define map =
$(foreach _,$2,$(eval $(call $1,$_)))
endef

# Bring in all of the module definitions;
# these are the external pieces that will be downloaded and built
# as part of creating the Heads firmware image.
include modules/*

define bins =
$(foreach m,$1,$(call prefix,$(build)/$($m_dir)/,$($m_output)))
endef
define libs =
$(foreach m,$1,$(call prefix,$(build)/$($m_dir)/,$($m_libraries)))
endef

define outputs =
$(foreach m,$1,\
	$(call bins,$m)\
	$(call libs,$m)\
)
endef

#
# Build a cpio from a directory
#
define do-cpio =
	$(call do,CPIO     ,$1,\
		( cd "$2"; \
		find . \
		| cpio \
			--quiet \
			-H newc \
			-o \
		) \
		| ./bin/cpio-clean \
		> "$1.tmp" \
	)
	@if ! cmp --quiet "$1.tmp" "$1" ; then \
		mv "$1.tmp" "$1" ; \
	else \
		echo "$(DATE) UNCHANGED $(1:$(pwd)/%=%)" ; \
		rm "$1.tmp" ; \
	fi
	@sha256sum "$1" | tee -a "$(HASHES)"
	$(call do,HASHES   , $1,\
		( cd "$2"; \
		echo "-----" ; \
		find . -type f -print0 \
		| xargs -0 sha256sum ; \
		echo "-----" ; \
		) >> "$(HASHES)" \
	)
endef

define do-copy =
	$(call do,INSTALL  ,$1 => $2,\
		if cmp --quiet "$1" "$2" ; then \
			echo "$(DATE) UNCHANGED $(1:$(pwd)/%=%)" ; \
		fi ; \
		cp -a "$1" "$2" ; \
	)
	@sha256sum "$(2:$(pwd)/%=%)"
endef


#
# Generate the targets for a module.
#
# Special variables like $@ must be written as $$@ to avoid
# expansion during the first evaluation.
#
define define_module =
  # if they have not defined a separate base dir, define it
  # as the same as their build dir.
  $(eval $1_base_dir = $(or $($1_base_dir),$($1_dir)))

  ifneq ("$($1_repo)","")
    # Checkout the tree instead and touch the canary file so that we know
    # that the files are all present. No signature hashes are checked in
    # this case, since we don't have a stable version to compare against.
    $(build)/$($1_base_dir)/.canary:
	git clone $($1_repo) "$(build)/$($1_base_dir)"
	cd $(build)/$($1_base_dir) && git submodule update --init --checkout
	if [ -r patches/$1.patch ]; then \
		( cd $(build)/$($1_base_dir) ; patch -p1 ) \
			< patches/$1.patch \
			|| exit 1 ; \
	fi
	if [ -d patches/$1 ] && \
	   [ -r patches/$1 ] ; then \
		for patch in patches/$1/*.patch ; do \
			echo "Applying patch file : $$$$patch " ;  \
			( cd $(build)/$($1_base_dir) ; patch -p1 ) \
				< $$$$patch \
				|| exit 1 ; \
		done ; \
	fi
	@touch "$$@"
  else
    # Fetch and verify the source tar file
    # wget creates it early, so we have to cleanup if it fails
    $(packages)/$($1_tar):
	$(call do,WGET,$($1_url),\
		if ! $(WGET) -O "$$@.tmp" $($1_url) ; then \
			exit 1 ; \
		fi ; \
		mv "$$@.tmp" "$$@" \
	)
    $(packages)/.$1-$($1_version)_verify: $(packages)/$($1_tar)
	echo "$($1_hash)  $$^" | sha256sum --check -
	@touch "$$@"

    # Unpack the tar file and touch the canary so that we know
    # that the files are all present
    $(build)/$($1_base_dir)/.canary: $(packages)/.$1-$($1_version)_verify
	mkdir -p "$$(dir $$@)"
	tar -xf "$(packages)/$($1_tar)" $(or $($1_tar_opt),--strip 1) -C "$$(dir $$@)"
	if [ -r patches/$1-$($1_version).patch ]; then \
		( cd $$(dir $$@) ; patch -p1 ) \
			< patches/$1-$($1_version).patch \
			|| exit 1 ; \
	fi
	if [ -d patches/$1-$($1_version) ] && \
	   [ -r patches/$1-$($1_version) ] ; then \
		for patch in patches/$1-$($1_version)/*.patch ; do \
			echo "Applying patch file : $$$$patch " ;  \
			( cd $$(dir $$@) ; patch -p1 ) \
				< $$$$patch \
				|| exit 1 ; \
		done ; \
	fi
	@touch "$$@"
  endif

  # Allow the module to override the destination configuration file
  # via a relative path.  Linux uses this to have a per-board build.
  $(eval $1_config_file_path := $(build)/$($1_dir)/$(or $($1_config_file),.config))

  ifeq "$($1_config)" ""
    # There is no official .config file
    $($1_config_file_path): $(build)/$($1_base_dir)/.canary
	@mkdir -p $$(dir $$@)
	@touch "$$@"
  else
    # Copy the stored config file into the unpacked directory
    $($1_config_file_path): $($1_config) $(build)/$($1_base_dir)/.canary
	@mkdir -p $$(dir $$@)
	$(call do-copy,$($1_config),$$@)
  endif

  # The first time we have to wait for all the dependencies to be built
  # before we can configure the target. Once the dep has been built,
  # we only depend on it for a rebuild.
  $(eval $1_config_wait := $(foreach d,$($1_depends),\
	$(shell [ -r $(build)/$($d_dir)/.build ] || echo $d)))

  # Use the module's configure variable to build itself
  # this has to wait for the dependencies to be built since
  # cross compilers and libraries might be messed up
  $(dir $($1_config_file_path)).configured: \
		$(build)/$($1_base_dir)/.canary \
		$(foreach d,$($1_config_wait),$(build)/$($d_dir)/.build) \
		$($1_config_file_path) \
		modules/$1
	@echo "$(DATE) CONFIG $1"
	@( \
		cd "$(build)/$($1_dir)" ; \
		echo "$($1_configure)"; \
		$($1_configure) \
	) \
		< /dev/null \
		2>&1 \
		| tee "$(log_dir)/$1.configure.log" \
		$(VERBOSE_REDIRECT)
	@touch "$$@"

  # Short hand for our module build target
  $1: \
	$(build)/$($1_dir)/.build \
	$(call outputs,$1) \

  # Target for all of the outputs, which depend on their dependent modules
  # being built, as well as this module being configured
  $(call outputs,$1): $(build)/$($1_dir)/.build

  # If any of the outputs are missing, we should force a rebuild
  # of the entire module
  $(eval $1.force = $(shell \
	stat $(call outputs,$1) >/dev/null 2>/dev/null || echo FORCE \
  ))

  $(build)/$($1_dir)/.build: $($1.force) \
		$(foreach d,$($1_depends),$(build)/$($d_dir)/.build) \
		$(dir $($1_config_file_path)).configured \

	@echo "$(DATE) MAKE $1"
	+@( \
		echo "$(MAKE) \
			-C \"$(build)/$($1_dir)\" \
			$($1_target)" ;  \
		$(MAKE) \
			-C "$(build)/$($1_dir)" \
			$($1_target)  \
	) \
		< /dev/null \
		2>&1 \
		| tee "$(log_dir)/$1.log" \
		$(VERBOSE_REDIRECT) \
	|| ( \
		echo "tail $(log_dir)/$1.log"; \
		echo "-----"; \
		tail -20 "$(log_dir)/$1.log"; \
		exit 1; \
	)
	$(call do,DONE,$1,\
		touch $(build)/$($1_dir)/.build \
	)



  $1.clean:
	-$(RM) "$(build)/$($1_dir)/.configured"
	-$(MAKE) -C "$(build)/$($1_dir)" clean

endef

$(call map, define_module, $(modules-y))

# hack to force musl-cross to be built before musl
#$(build)/$(musl_dir)/.configured: $(build)/$(musl-cross_dir)/../../crossgcc/x86_64-linux-musl/bin/x86_64-musl-linux-gcc

#
# Install a file into the initrd, if it changed from
# the destination file.
#
define install =
	@-mkdir -p "$(dir $2)"
	$(call do,INSTALL,$2,cp -a "$1" "$2")
endef

#
# Files that should be copied into the initrd
# THis should probably be done in a more scalable manner
#
define initrd_bin_add =
$(initrd_bin_dir)/$(notdir $1): $1
	$(call do,INSTALL-BIN,$$(<:$(pwd)/%=%),cp -a "$$<" "$$@")
	@$(CROSS)strip --preserve-dates "$$@" 2>&-; true
initrd_bins += $(initrd_bin_dir)/$(notdir $1)
endef


define initrd_lib_add =
$(initrd_lib_dir)/$(notdir $1): $1
	$(call do,INSTALL-LIB,$(1:$(pwd)/%=%),\
		$(CROSS)strip --preserve-dates -o "$$@" "$$<")
initrd_libs += $(initrd_lib_dir)/$(notdir $1)
endef

# Only some modules have binaries that we install
# Shouldn't this be specified in the module file?
#bin_modules-$(CONFIG_MUSL) += musl-cross
bin_modules-$(CONFIG_KEXEC) += kexec
bin_modules-$(CONFIG_TPMTOTP) += tpmtotp
bin_modules-$(CONFIG_PCIUTILS) += pciutils
bin_modules-$(CONFIG_FLASHROM) += flashrom
bin_modules-$(CONFIG_CRYPTSETUP) += cryptsetup
bin_modules-$(CONFIG_GPG) += gpg
bin_modules-$(CONFIG_GPG2) += gpg2
bin_modules-$(CONFIG_PINENTRY) += pinentry
bin_modules-$(CONFIG_LVM2) += lvm2
bin_modules-$(CONFIG_DROPBEAR) += dropbear
bin_modules-$(CONFIG_FLASHTOOLS) += flashtools
bin_modules-$(CONFIG_NEWT) += newt
bin_modules-$(CONFIG_CAIRO) += cairo
bin_modules-$(CONFIG_FBWHIPTAIL) += fbwhiptail
bin_modules-$(CONFIG_HOTPKEY) += hotp-verification
bin_modules-$(CONFIG_MSRTOOLS) += msrtools
bin_modules-$(CONFIG_NKSTORECLI) += nkstorecli

$(foreach m, $(bin_modules-y), \
	$(call map,initrd_bin_add,$(call bins,$m)) \
)

# Install the libraries for every module that we have built
$(foreach m, $(modules-y), \
	$(call map,initrd_lib_add,$(call libs,$m)) \
)

#
# hack to build cbmem from coreboot
# this must be built *AFTER* musl, but since coreboot depends on other things
# that depend on musl it should be ok.
#
COREBOOT_UTIL_DIR=$(build)/$(coreboot_base_dir)/util
ifeq ($(CONFIG_COREBOOT),y)
$(eval $(call initrd_bin_add,$(COREBOOT_UTIL_DIR)/cbmem/cbmem))
#$(eval $(call initrd_bin_add,$(COREBOOT_UTIL_DIR)/superiotool/superiotool))
#$(eval $(call initrd_bin_add,$(COREBOOT_UTIL_DIR)/inteltool/inteltool))
endif

$(COREBOOT_UTIL_DIR)/cbmem/cbmem \
$(COREBOOT_UTIL_DIR)/superiotool/superiotool \
$(COREBOOT_UTIL_DIR)/inteltool/inteltool \
: $(build)/$(coreboot_base_dir)/.canary musl-cross
	+$(call do,MAKE,$(notdir $@),\
		$(MAKE) -C "$(dir $@)" $(CROSS_TOOLS) \
	)

# superio depends on zlib and pciutils
$(COREBOOT_UTIL_DIR)/superiotool/superiotool: \
	$(build)/$(zlib_dir)/.build \
	$(build)/$(pciutils_dir)/.build \

#
# initrd image creation
#
# The initrd is constructed from various bits and pieces
# The cpio-clean program is used ensure that the files
# always have the same timestamp and appear in the same order.
#
# The blobs/dev.cpio is also included in the Linux kernel
# and has a reproducible version of /dev/console.
#
# The xz parameters are copied from the Linux kernel build scripts.
# Without them the kernel will not decompress the initrd.
#
# The padding is to ensure that if anyone wants to cat another
# file onto the initrd then the kernel will be able to find it.
#

initrd-y += $(pwd)/blobs/dev.cpio
initrd-y += $(build)/$(initrd_dir)/modules.cpio
initrd-y += $(build)/$(initrd_dir)/tools.cpio
initrd-$(CONFIG_HEADS) += $(build)/$(initrd_dir)/heads.cpio

#$(build)/$(initrd_dir)/.build: $(build)/$(initrd_dir)/initrd.cpio.xz

$(build)/$(initrd_dir)/initrd.cpio.xz: $(initrd-y)
	$(call do,CPIO-XZ  ,$@,\
	$(pwd)/bin/cpio-clean \
		$^ \
	| xz \
		--check=crc32 \
		--lzma2=dict=1MiB \
		-9 \
	| dd bs=512 conv=sync status=none > "$@.tmp" \
	)
	@if ! cmp --quiet "$@.tmp" "$@" ; then \
		mv "$@.tmp" "$@" ; \
	else \
		echo "$(DATE) UNCHANGED $(@:$(pwd)/%=%)" ; \
		rm "$@.tmp" ; \
	fi
	@sha256sum "$(@:$(pwd)/%=%)" | tee -a "$(HASHES)"

#
# The heads.cpio is built from the initrd directory in the
# Heads tree.
#
$(build)/$(initrd_dir)/heads.cpio: FORCE
	$(call do-cpio,$@,$(pwd)/initrd)


#
# The tools initrd is made from all of the things that we've
# created during the submodule build.
#
$(build)/$(initrd_dir)/tools.cpio: \
	$(initrd_bins) \
	$(initrd_libs) \
	$(initrd_tmp_dir)/etc/config \

	$(call do-cpio,$@,$(initrd_tmp_dir))
	@$(RM) -rf "$(initrd_tmp_dir)"

$(initrd_tmp_dir)/etc/config: FORCE
	@mkdir -p $(dir $@)
	$(call do,INSTALL,$(CONFIG), \
		export \
			| grep ' CONFIG_' \
			| sed -e 's/^declare -x /export /' \
			-e 's/\\\"//g' \
			> $@ \
	)
	$(call do,HASH,$(GIT_HASH) $(GIT_STATUS) $(BOARD), \
		echo export GIT_HASH=\'$(GIT_HASH)\' \
		>> $@ ; \
		echo export GIT_STATUS=$(GIT_STATUS) \
		>> $@ ; \
		echo export CONFIG_BOARD=$(BOARD) \
		>> $@ ; \
	)

# Ensure that the initrd depends on all of the modules that produce
# binaries for it
$(build)/$(initrd_dir)/tools.cpio: $(foreach d,$(bin_modules-y),$(build)/$($d_dir)/.build)


# List of all modules, excluding the slow to-build modules
modules-slow := musl musl-cross kernel_headers
module_dirs := $(foreach m,$(filter-out $(modules-slow),$(modules-y)),$($m_dir))

echo_modules:
	echo $(module_dirs)

modules.clean:
	for dir in $(module_dirs) \
	; do \
		$(MAKE) -C "build/$$dir" clean ; \
		rm "build/$$dir/.configured" ; \
	done

real.clean:
	for dir in \
		$(module_dirs) \
		$(kernel_headers) \
	; do \
		if [ ! -z "$$dir" ]; then \
			rm -rf "build/$$dir"; \
		fi; \
	done
	cd install && rm -rf -- *


else
# Wrong make version detected -- build our local version
# and re-invoke the Makefile with it instead.
$(eval $(shell echo >&2 "$(DATE) Wrong make detected: $(LOCAL_MAKE_VERSION)"))
HEADS_MAKE := $(build)/$(make_dir)/make

# Once we have a proper Make, we can just pass arguments into it
all linux cpio run: $(HEADS_MAKE)
	LANG=C MAKE=$(HEADS_MAKE) $(HEADS_MAKE) $(MAKE_JOBS) $@
%.clean %.vol %.menuconfig: $(HEADS_MAKE)
	LANG=C MAKE=$(HEADS_MAKE) $(HEADS_MAKE) $@

bootstrap: $(HEADS_MAKE)

# How to download and build the correct version of make
$(packages)/$(make_tar):
	$(WGET) -O "$@.tmp" "$(make_url)"
	if ! echo "$(make_hash)  $@.tmp" | sha256sum --check -; then \
		exit 1 ; \
	fi
	mv "$@.tmp" "$@"

$(build)/$(make_dir)/.extract: $(packages)/$(make_tar)
	tar xf "$<" -C "$(build)"
	touch "$@"

$(build)/$(make_dir)/.patch: $(build)/$(make_dir)/.extract
	( cd "$(dir $@)" ; patch -p1 ) < "patches/make-$(make_version).patch"
	touch "$@"

$(build)/$(make_dir)/.configured: $(build)/$(make_dir)/.patch
	cd "$(dir $@)" ; \
	./configure 2>&1 \
	| tee "$(log_dir)/make.configure.log" \
	$(VERBOSE_REDIRECT)
	touch "$@"

$(HEADS_MAKE): $(build)/$(make_dir)/.configured
	make -C "$(dir $@)" $(MAKE_JOBS) \
		2>&1 \
		| tee "$(log_dir)/make.log" \
		$(VERBOSE_REDIRECT)

endif