# Configuration for a t430 with HOTP (Nitrokey/Purism USB Security dongle enabled HOTP support) 
# running Qubes 4.1 and other OSes.
#
# Deactivated to fit in coreboot's CONFIG_CBFS_SIZE=0x700000 :
# dropbear support(ssh client/server)
# e1000e (ethernet driver)
#
# Addition vs standard x230 board config:
# HOTP_KEY: HOTP challenge for currently supported USB Security dongles
export CONFIG_COREBOOT=y
export CONFIG_COREBOOT_VERSION=4.13
export CONFIG_LINUX_VERSION=4.14.62

CONFIG_COREBOOT_CONFIG=config/coreboot-t430-legacy.config
CONFIG_LINUX_CONFIG=config/linux-x230-legacy.config

#Additional hardware support
CONFIG_LINUX_USB=y
CONFIG_LINUX_E1000E=n

CONFIG_CRYPTSETUP2=y
CONFIG_FLASHROM=y
CONFIG_FLASHTOOLS=y
CONFIG_GPG2=y
CONFIG_KEXEC=y
CONFIG_UTIL_LINUX=y
CONFIG_LVM2=y
CONFIG_MBEDTLS=y
CONFIG_PCIUTILS=y

#Remote attestation support
#TPM based requirements
export CONFIG_TPM=y
CONFIG_POPT=y
CONFIG_QRENCODE=y
CONFIG_TPMTOTP=y
#HOTP based remote attestation for supported USB Security dongle
#With/Without TPM support
CONFIG_HOTPKEY=y

#Nitrokey Storage admin tool
CONFIG_NKSTORECLI=n

#GUI Support
#Console based Whiptail support(Console based, no FB):
CONFIG_SLANG=y
CONFIG_NEWT=y
#FBWhiptail based (Graphical):
#CONFIG_CAIRO=y
#CONFIG_FBWHIPTAIL=y

#Additional tools:
#SSH server (requires ethernet drivers, eg: CONFIG_LINUX_E1000E)
CONFIG_DROPBEAR=n
#Ethernet driver (Heads only)
CONFIG_LINUX_E1000E=n

export CONFIG_BOOTSCRIPT=/bin/gui-init
export CONFIG_BOOT_REQ_HASH=n
export CONFIG_BOOT_REQ_ROLLBACK=n
export CONFIG_BOOT_KERNEL_ADD="intel_iommu=on intel_iommu=igfx_off"
export CONFIG_BOOT_KERNEL_REMOVE="quiet"
export CONFIG_BOOT_DEV="/dev/sda1"
export CONFIG_BOARD_NAME="Thinkpad T430-hotp-legacy"
export CONFIG_FLASHROM_OPTIONS="--force --noverify-all -p internal --ifd --image bios"

# This board has two SPI flash chips, an 8 MB that holds the IFD,
# the ME image and part of the coreboot image, and a 4 MB one that
# has the rest of the coreboot and the reset vector.
#
# Only flashing to the bios region is safe to do. The easiest is to
# flash internally when the IFD is unlocked for writing, and x230-flash
# is installed first.