# Configuration for a kgpe-d16_server with whiptail, permitting usage of gui-init on console without FB graphic
# per https://www.raptorengineering.com/coreboot/kgpe-d16-bmc-port-status.php work, with patches merged into Heads
#
# Tested: ASMBV4 reprogrammed per https://www.raptorengineering.com/coreboot/kgpe-d16-bmc-port-status.php
#
# Status:
# - ASpeed text output given on VGA
# - All console output rerirected to sttyS0
# - TPM support in romstage (not bootblock) with TPM SLB9635 TT 1.2 by Infineon
#
# - To connect to BMC: https://github.com/osresearch/heads/issues/134#issuecomment-368922440
# - Please contribute documentation on heads-wiki
# - Please support https://github.com/osresearch/heads/issues/719
# - Disk Unlock Key released by TPM since not deactivated
# - Currently, no microcode is included with coreboot. This is due to to a bug
#   in which newer Linux releases panics when the newest microcode is loaded by
#   coreboot. AMD Opteron 6300 series users are STRONGLY encouraged to make
#   sure their operating system loads microcode updates.

export CONFIG_COREBOOT=y
export CONFIG_COREBOOT_VERSION=4.11
export CONFIG_LINUX_VERSION=6.1.8

CONFIG_COREBOOT_CONFIG=config/coreboot-kgpe-d16_server-whiptail.config
CONFIG_LINUX_CONFIG=config/linux-kgpe-d16_server-whiptail.config

CONFIG_CRYPTSETUP2=y
CONFIG_FLASHPROG=y
CONFIG_FLASHTOOLS=y
CONFIG_GPG2=y
CONFIG_KEXEC=y
CONFIG_UTIL_LINUX=y
CONFIG_LVM2=y
CONFIG_MBEDTLS=y
CONFIG_PCIUTILS=y
CONFIG_POPT=y
CONFIG_QRENCODE=y
CONFIG_TPMTOTP=y
CONFIG_DROPBEAR=y

#Whiptail
CONFIG_SLANG=y
CONFIG_NEWT=y
#FBWhiptail
#CONFIG_CAIRO=y
#CONFIG_FBWHIPTAIL=y

CONFIG_LINUX_USB=y
CONFIG_LINUX_E1000E=y
export CONFIG_LINUX_USB_COMPANION_CONTROLLER=y

export CONFIG_TPM=y
#BOOT SCRIPT SELECTION
#export CONFIG_BOOTSCRIPT=/bin/generic-init
export CONFIG_BOOTSCRIPT=/bin/gui-init
#export CONFIG_BOOTSCRIPT_NETWORK=/bin/network-init-recovery

#CONSOLE SELECTION
#Single output to OpenBMC
export CONFIG_BOOT_KERNEL_ADD="nohz=on console=ttyS1,115200n8 "

#Dual output to local console (tty0) and OpenBmc (ttyS1)
#export CONFIG_BOOT_KERNEL_ADD="nohz=on console=ttyS1,115200n8 console=tty0"

#Single output to tty0
#export CONFIG_BOOT_KERNEL_ADD="nohz=on"
export CONFIG_BOOT_RECOVERY_SERIAL="/dev/ttyS0"
export CONFIG_BOOT_STATIC_IP=192.168.2.3

export CONFIG_BOOT_REQ_HASH=n
export CONFIG_BOOT_REQ_ROLLBACK=n
export CONFIG_BOOT_KERNEL_REMOVE="plymouth.ignore-serial-consoles"
export CONFIG_BOARD_NAME="KGPE-D16 Server-whiptail"
export CONFIG_USB_BOOT_DEV="/dev/sdb1"
export CONFIG_FLASH_OPTIONS="flashprog --progress --programmer internal"
#export CONFIG_BOOT_STATIC_IP=192.168.1.2