# Configuration for a x230-hotp-verification (Nitrokey/Purism USB Security dongle enabled HOTP support) 
# running Qubes and other OSes.
#
# Deactivated to fit in coreboot's CONFIG_CBFS_SIZE=0x700000 :
# dropbear support(ssh client/server)
# e1000e (ethernet driver)
#
# Addition vs standard x230 board config:
# HOTP_KEY: HOTP challenge for currently supported USB Security dongles
export CONFIG_COREBOOT=y
export CONFIG_COREBOOT_VERSION=4.8.1
export CONFIG_LINUX_VERSION=4.14.62

CONFIG_COREBOOT_CONFIG=config/coreboot-x230-hotp-verification.config
CONFIG_LINUX_CONFIG=config/linux-x230.config

CONFIG_CRYPTSETUP=y
CONFIG_FLASHROM=y
CONFIG_FLASHTOOLS=y
CONFIG_GPG2=y
CONFIG_KEXEC=y
CONFIG_UTIL_LINUX=y
CONFIG_LVM2=y
CONFIG_MBEDTLS=y
CONFIG_PCIUTILS=y
CONFIG_POPT=y
CONFIG_QRENCODE=y
CONFIG_TPMTOTP=y

#CONFIG_SLANG=y
#CONFIG_NEWT=y
CONFIG_CAIRO=y
CONFIG_FBWHIPTAIL=y
CONFIG_HOTPKEY=y

CONFIG_LINUX_USB=y

#SSH client/server
CONFIG_DROPBEAR=n
#Ethernet driver (Heads only)
CONFIG_LINUX_E1000E=n

export CONFIG_TPM=y
export CONFIG_BOOTSCRIPT=/bin/gui-init
export CONFIG_BOOT_REQ_HASH=n
export CONFIG_BOOT_REQ_ROLLBACK=n
export CONFIG_BOOT_KERNEL_ADD="intel_iommu=on intel_iommu=igfx_off"
export CONFIG_BOOT_KERNEL_REMOVE="quiet"
export CONFIG_BOOT_DEV="/dev/sda1"
export CONFIG_BOARD_NAME="Thinkpad X230"
export CONFIG_FLASHROM_OPTIONS="--force --noverify-all -p internal --ifd --image bios"

# This board has two SPI flash chips, an 8 MB that holds the IFD,
# the ME image and part of the coreboot image, and a 4 MB one that
# has the rest of the coreboot and the reset vector.
#
# Only flashing to the bios region is safe to do. The easiest is to
# flash internally when the IFD is unlocked for writing, and x230-flash
# is installed first.