Simplify "enable" prompt a bit, clarify that firmware updating is
blocked, and remove mention of "failsafe boot mode". Reword "disable"
prompt similarly.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The early recovery shell ("hold R") and serial recovery both could
bypass Restricted Boot since they occurred before config.user was
loaded. Load config.user earlier before these recovery methods.
Executing a shell directly (if recovery failed) also would bypass
Restricted Boot, additionally leaking /tmp/secret. Remove this from
the early recovery shell logic. Also remove the final failsafe exec
and move the "just in case" recovery from normal boot here instead, in
case the regular init script fails.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
kgpe-d16 and librem-l1um depend on 4.11 still today in tree, even though building is successful only on debian-10.
Fixing so people building 4.11 today are still successful.
4.19+ already depends on github.com releases tarballs.
REF: https://review.coreboot.org/c/coreboot/+/76399
The -s mode was removed, remove it from usage. Remove the test to skip
checking for board flashrom options with -s mode.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The "disable restricted boot" prompt got slightly too long when fixing
the TPM wording. Re-wrap that line to match the others. Wrapping
could use some general cleanup but this is sufficient so the text isn't
truncated.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The CONFIG_BASIC test was backwards, as a result it skipped the
LUKS disk unlock logic if basic mode was _not_ enabled. This wasn't
observed in the PureBoot distribution because we disable the LUKS disk
unlock feature.
CONFIG_BOOT_REQ_ROLLBACK and CONFIG_BOOT_REQ_HASH logic was also
skipped incorrectly, though neither of these are enabled on any board
so this had no effect in the PureBoot distribution either.
Test basic with each bit of logic to eliminate duplication of the
kexec-boot call and fix the LUKS disk unlock feature.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
kgpe-d16 linux configs: disable CONFIG_CRYPTO_AES_NI_INTEL (not avail on AMD)
This applied to Q35 qemu board which is AMD, not intel.
generic AES needs to be enabled on non-intel boards, otherwise cryptsetup doesn't know how to deal with xts-plain
Then saved back with linux.save_in_oldconfig_format_in_place
Only try the default PIN automatically for 1 month after key creation.
This simplifies initial ownership but still encourages changing the
PIN.
Never enter a PIN automatically if fewer than 3 attempts remain, to
avoid causing lockout if the PIN has been changed.
Remind what the default PIN was if it is not attempted for either
reason.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
A few lines in the documentation got truncated somehow. Restored the
swtpm instructions from some notes and rewrote the others.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
HOTP/TOTP secrets don't have to be printable. Use binary data to
include 160 bits of entropy instead of just 80.
The secret is still limited to 20 bytes. Most keys now support up to
40 bytes, but tpmtotp is still limited to 20 bytes.
Move the truncation to 20 bytes a bit later, for future improvements to
detect the key's actual limit.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
flash.sh had a special mode to read (like -r) and then sha256sum the
resulting file. This is no different from just a read followed by a
sha256sum, and the only caller also had logic to sha256sum a cached
file anyway.
Just use flash.sh -r and sha256sum the result.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Non-impactful action, first step for #1421 based on participation in testing of #1398 and prior non-tested PRs.
EDIT: last minute readd of x220-maximized boards (x220-maximized and x220-hotp-maximized boards).
x220 is still UNTESTED (legacy, manually extracting ifs, me and gbe).
EDIT: last minute readd of t440p-maximized boards (t440p-maximized and t440p-hotp-maximized boards).
Thanks to @srgrint for lat minute report that t440p and x220 were tested
----
Traces of commands used:
ls qemu-linuxboot* leopard* r630* s2600wf* tioga* winterfell* t420* t520* t440p* w530* kgpe* p8z77* x220* x230-maximized-fhd_edp* | grep ":" | awk -F ":" {'print $1'}| while read board; do mv $board/$board.config $board/UNTESTED_$board.config; done
ls qemu-linuxboot* leopard* r630* s2600wf* tioga* winterfell* t420* t520* t440p* w530* kgpe* p8z77* x220* x230-maximized-fhd_edp* | grep ":" | awk -F ":" {'print $1'}| while read dir; do mv $dir UNTESTED_$dir; done
ls UNTESTED* | grep ":" | awk -F ":" {'print $1'}| awk -F "UNTESTED_" {'print $2'} | while read line; do sed 's/'"$line"'/UNTESTED_'"$line"'/g' ../.circleci/config.yml -i ; done
quick fix of circleci:
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
Modify p8z77-m_pro-tpm1 hotp board config to include to their maximized counterpart
Enable the truncate coreutil.
CONFIG_BASE64 and CONFIG_BASH_IS_NONE just changed =n vs. not-set by
menuconfig, meaning is still the same.
initrd.cpio.xz went up by 512 bytes on Librem Mini v2 (probably the
minimum xz increment). busybox stripped binary did not change size.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Basic mode allows (but does not require) setting a default boot option.
Don't seal disk unlock keys in Basic mode.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Some prompts were missed when changing to 0 80 the first time around,
and some new ones were added thinking that size was intentional.
Replace '16 60' with '0 80' globally.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Since 'standard boot' was removed, empty "$option" only occurs due to
error now. Die with a specific error.
Now, we only proceed past ISO boot if no ISOs were present, meaning the
disk might be a plain bootable medium. Present a specific error for
restricted boot in that case.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The whiptail prompt text was copied from the 'read' prompt but did not
actually have the Abort option. Add it.
The "s for standard boot" option was missing from whiptail. For plain
'read' it does not appear to revert to a normal boot, it actually went
on to try plain bootable USB on the same medium. It's not realistic
for a disk to be both directly bootable and contain ISOs, and this
option does not appear to have been missed since it was missing from
the whiptail/fbwhiptail version, which almost all boards use. Remove
it.
Handle canceling fbwhiptail with esc-esc the same as Abort.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This feature doesn't require a TPM. The configuration GUI appears
either way, but the actual check was silently skipped on TPM-less
devices. Enable it even if there is no TPM.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Allow configuring the root hash feature when the variables are not set
initially. This worked on Librem boards because the boards all have
defaults for these variables, but didn't work when those defaults were
not present.
Fix set_config function to put quotes around an added variable's value.
Change load_config_value function to default to empty, so it can be
used with non-boolean variables. None of the existing callers cared
about the 'n' default (boolean variables should always be tested ="y"
or !="y" anyway).
Use load_config_value in config-gui.sh for boot device and the root
hash parameters, so unset defaults do not cause a failure. Improve the
prompts so the "current value" text only appears if there is a current
value. Use set_config instead of replace_config so the variables will
be added if needed.
Prevent enabling the root hash feature if it hasn't been configured
yet.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Update flashrom - in particular, this includes support for new chipsets
like Jasper Lake.
CONFIG_INTERAL_X86 was created so CONFIG_INTERNAL could apply to other
platforms, enable it for x86.
The default build target now requires sphinx, just build flashrom
itself.
Update flashrom_progress - filter out noise in newer flashrom that
chokes the progress bar implementation, make size detection more
robust, improve progress bar implementation slightly.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Co-signed by: Thierry Laurion <insurgo@riseup.net.