* modules/linux: add support for building with kernel 5.4.69
Add support to module, port patches from 4.19.139.
Needed for newer platforms not supported by 4.19 kernel.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* CircleCI: add rysnc dependency for building kernel 5.x
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* Migrate all Librem boards to kernel 5.x, common config
Update linux-librem_common.config from 4.x to 5.x, and add
CONFIG items needed to support the librem_l1um (AST DRM drivers,
serial port output).
Tested on Librem 13v4, Librem Mini, and Librem Server L1UM.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* modules/linux: Add support for multiple kernel versions
Follow same pattern as used for coreboot. Add existing kernel version
as default for all existing boards.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* modules/linux: Add option to use 4.19 LTS kernel
Add option to use kernel 4.19.139 (current LTS version).
Duplicate existing patches from 4.14.62 as they all apply cleanly.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
This reduces the amount of noise in the Linux kernel config files
by only storing the differences from the stock configuration.
It adds a new makefile target 'linux.saveconfig' to convert the
build tree's .config file into config/linux-linuxboot.config.
USB smart card readers are most full speed devices, and there is no
"rate-matching hubs" beneath the root hub on older (e.g. GM45) plat-
forms, which has companion OHCI or UHCI controllers and needs cor-
responding drivers to communicate with card readers directly plugged
into the motherboard, otherwise a discrete USB hub should be inserted
between the motherboard and the reader.
This time I make inserting linux modules for OHCI and UHCI controllable
with option CONFIG_LINUX_USB_COMPANION_CONTROLLER.
A linux config for x200 is added as an example.
Tested on my x200s and elitebook revolve 810g1.
Move board configuration into `boards/` instead of `config/`
Fix mistake in building kernel module tree before kernel was done.
Allow per-board initrd builds (#278)
Allow per-board configurations for things (#304)
This development branch builds a NERF firmware for the Dell R630
server. It does not use coreboot; instead it branches directly
from the vendor's PEI core into Linux and the Heads runtime
that is setup to be run as an EFI executable.
This addresses multiple issues:
* Issue #63: initrd is build fresh each time, so tracked files do not matter.
* Issue #144: build time configuration
* Issue #123: allows us to customize the startup experience
* Issue #122: manual start-xen will go away
* Issue #25: tpmtotp PCRs are updated after reading the secret
* Issue #16: insmod now meaures modules
This is a step towards unifying the server and laptop config (issue #139)
and also makes it possible to later remove the USB modules from the
normal boot path.
Change all of the builds to use $(MAKE) instead of the /usr/bin/make.
Download and build GNU make-4.2 if the wrong version is installed
on the system.
Re-invoke build/make-4.2/make with the target that was passed in once
the correct make has been built.
